Problem in loading a DTP

Hi,
I´m using BW 7.0, i just installed SP13.
I load 0VENDOR ATTR without problem, but I had a short dump loadind a DTP Text of 0VENDOR.
Following message:
"ASSERTION_FAILED" " "
"CL_RSTRAN_GEN_STEP_DIRECT=====CP" or "CL_RSTRAN_GEN_STEP_DIRECT=====CM001"
"GET_META_OBJECT_"
Does anyone knows how to solve it?
Thanks
Tomas

Tomas,
If you find the transformation inactive it could have happend for any other transported objects as well. You can check whether the standard ABAP prgram that activate all transfer rules (use RS_TRANSTRU_ACIVATE_ALL).
In our installation we keep the master data loaded in a old way which seems easier compared to DTP, it may be convenient for transaction data but never felt easy with master data (IP, then DTP too much for some of the master data). SO we have both old way for master data and new way for transaction data.
Hope this helps, award points if useful.
Goodluck,
Alex(Arthur Samson)

Similar Messages

Facing problem in loading masterdata from PSA for 0cust_sales

Hi,
I am facing problem while loading Masterdata for 0cust_sales in PSA. data is coming from KNVV table but there is no duplicate record in the KNVV Table but while loading data to SAP BI, Its showing error message in PSA for few customers - duplicate records being created.
Kindly please help me with this issue
Regards,
Swapnil

Switch on Indicator: Handling Duplicate Data Records
Use
If this indicator is set, duplicate data records (that is, records with the same key) are handled during an update in the order in which they occur in a data package.
For time-independent attributes of a characteristic, the last data record with the corresponding key within a data package defines the valid attribute value for the update for a given data record key.
For time-dependent attributes, the validity ranges of the data record values are calculated according to their order (see example).
If the indicator is not set and error handling is deactivated, the request terminates once data records with the same key are detected. If error handling is activated, data records that have the same key are written to the error stack of the DTP.
Note:
If during your data quality measures you want to make sure that the data packages delivered by the DTP are not modified by the master data update, you must not set this indicator.

Selective data load using DTP

Hi,
We have created a data flow from once cube to other cube using Transformations. Now we would like to do selective data load from source cube to target cube. The problem is that in DTP we are not able to give the selective weeks in the Filter area because we can give filter conditions in change mode only and in production system we canu2019t go to change mode for DTP. So we struck up there. Can any one of you tell me how to do selective data load in this scenario
Thanks in advance

Hi,
As a try, createe a new DTP and try to get in to change mode.It might accept that way.
otherway round,you can go the way as manisha explained in previous post.
Do the load and do a selective deletion. you can do selective deletion using a program.
Cheers,
Srinath.

What is the diffrence between full load and delta load in DTP

hI ,
I am trying to load the data into CUBE from another cube using DTP ..
There are 2 DTPS ..
1: DTP with full load
2: DTP with DELTA load ..
what is the diffrence betwen thse two in DTP ...
Please can somebody help me

1: DTP with full load - will update all the requests in PSA/source to the target,
2: DTP with DELTA load - will update only new requests to the datatarget
The system doesnt distinguish new records on the basis of changed records, rather by the request. Thats the reason you have datamart status to indicate if the request has been loaded to further datatargets.

Problem in loading animated gif

I have problem in loading animated gif with ClassLoader. Here is the code:
ClassLoader loader=this.getClass().getClassLoader();
URL res = loader.getResource(name);
if (res!=null) {
ImageIcon icon = new ImageIcon(res);
if (icon != null) {
Image image = icon.getImage();
if(icon.getImageLoadStatus() == MediaTracker.COMPLETE)
images.put(name,image);
return (Image) image;
} else {
System.out.println("Failed to load "+name+" error "+icon.getImageLoadStatus());
images.put(name,"");
Only when the gif is an animated gif, I get error message: Failed to load and icon.getImageLoadStatus() returns 2. Otherwise, it works.
Anyone encounters the same problem as me?

I think the problem is the asynchronous loading of the gif.
when you call f(icon.getImageLoadStatus() == MediaTracker.COMPLETE)
I think it is comming back MediaTracker.LOADING .
for an animated gif, it may not come back COMPLETE until after running thru
the whole automation. instead you could just check:
(icon.getImageLoadStatus() != MediaTracker.ERRORED)

Bank statement: problem to load variable length field

we have many bank accounts with different banks, and we would like to use the bank reconciliation module to do bank reconciliation.
we have problem in load the MT940 bank statement. All these banks are providing so called standard SWIFT940 format, which not able to give fixed length field.
we have problem on line 61 which have a lot of variable length fields.
line 61 comprise of 7 fields, which are:
A) Value date - fixed 6 chars.
B) Entry date - fixed 4 chars.
C) Credit/debit - variable 1-2 chars.
D) Fund Code - fixed 1 char
E) Transaction amount - variable 15 chars
F) Transaction code/type - fixed 4 chars
G) MID, cheque#, BIS - variable 16 chars
How can we write the SQL Loader script if there is no delimiter, and the start position of the fields are not fixed?
we can load A and B easily, but C onwards we will have problems.
please help.
INTO TABLE ce_stmt_int_tmp
WHEN rec_id_no = '61'
TRAILING NULLCOLS
(rec_no RECNUM,
rec_id_no POSITION(1:2) CHAR,
column1 POSITION(4:9) CHAR,
column2 POSITION(10:13) CHAR,
column3 ??
column4 ??
column5 ??
column6 ??
column7 ??
------

Hi Linda,
As said by gupta, please check, whether the bank statement has the statement 62F:
If not, please get the statement again from bank and ensure that the end statement 62F exists in the statement..
This will help you to overcome your problem..
Regards,
Praisty

Problem in Loading Multiple image in Single Sprite/MovieClip

Hi All,
I am having a killing problem in loading multiple images in single movie clip/sprite using a separate class.
Here is the ImageLoader.as class
package com.project.utils{
 import com.project.*;
 import com.project.utils.*;
 import flash.events.EventDispatcher;
 import flash.display.MovieClip;
 import flash.events.Event;
 import flash.events.ProgressEvent;
 import flash.display.Loader;
 import flash.events.IOErrorEvent;
 import flash.net.URLLoader;
 import flash.events.MouseEvent;
 import flash.net.URLRequest;
 import flash.display.Bitmap;
 public class ImageLoader extends EventDispatcher {
 public var imgloader:Loader;
 public var imgMc:MovieClip;
 public var imgObject:Object;
 public var loaded:Number;
 public function ImageLoader():void {
 imgMc = new MovieClip();
 imgObject = new Object();
 imgloader = new Loader();
 public function loadImage(imgHolder:MovieClip, imgObj:Object):void {
 imgMc = new MovieClip();
 imgObject = new Object();
 imgloader = new Loader();
 imgMc = imgHolder;
 imgObject = imgObj;
 imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
 imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadProgress);
 imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadFailed);
 imgloader.load(new URLRequest(imgObj.FilePath));
 private function onImgLoad(Evt:Event):void {
 var image:Bitmap = Bitmap(Evt.target.content);
 try {
 imgMc.removeChildAt(0);
 } catch (error:Error) {
 imgMc.addChild(image);
 try {
 if (imgObject.URL != undefined) {
 imgMc.buttonMode = true;
 imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
 imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
 } catch (err:Error) {
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
 private function onImageClicked(evt:MouseEvent):void {
 trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
 private function onImgLoadProgress(Evt:ProgressEvent):void {
 if (Evt.bytesLoaded>0) {
 loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
 private function onImageLoadFailed(Evt:IOErrorEvent):void {
 trace("Image Loading Failed");
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
 for (var i=0; i < 3; i++) {
 //imgLoader=new ImageLoader;
 imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
 var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
 target.list_mc.visible=false;
 var imgObj:Object=new Object;
 imgObj.FilePath=list[i].Thumbnail;
 imgObj.Url=list[i].Url;
 imgObj.Target=list[i].Target;
 target.list_mc.urlObj=new Object ;
 target.list_mc.urlObj=imgObj;
 imgLoader.loadImage(target.list_mc.imgholder_mc,imgObj);
 target.list_mc.lable_txt.htmlText="" + list[i].Label + "";
 target.list_mc.imgholder_mc.buttonMode=true;
 target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
 mcCount++;
In this case, the ImageLoader.as works only on the last movie clip from the for loop. For example, if i am trying to load three image in three movie clips namely img_mc1,img_mc2 and img_mc3 using the for loop and ImageLoader.as, I am getting the image loaded in the third movie clip only img_mc.
See at the same time, If i uncomment onething in the for loop that is
//imgLoader=new ImageLoader;
its working like a charm. But I know creating class objects in a for loop is not a good idea and also its causes some other problems in my application.
So, help to get rid out of this problem.
Thanks
-Varun

package com.project.utils{
 import com.project.*;
 import com.project.utils.*;
 import flash.events.EventDispatcher;
 import flash.display.MovieClip;
 import flash.events.Event;
 import flash.events.ProgressEvent;
 import flash.display.Loader;
 import flash.events.IOErrorEvent;
 import flash.net.URLLoader;
 import flash.events.MouseEvent;
 import flash.net.URLRequest;
 import flash.display.Bitmap;
 public class ImageLoader extends EventDispatcher {
 public var imgloader:Loader;
 public var imgMc:MovieClip;
 public var imgObject:Object;
 public var loaded:Number;
 public function ImageLoader():void {
// better add you movieclip to the stage if you want to view anything added to it.
 imgMc = new MovieClip();
 imgObject = new Object();
 imgloader = new Loader();
 public function loadImage(filepath:String):void {
 imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
 imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadPr ogress);
 imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadF ailed);
 imgloader.load(new URLRequest(filepath));
 private function onImgLoad(Evt:Event):void {
 var image:Bitmap = Bitmap(Evt.target.content);
 try {
 imgMc.removeChildAt(0);
 } catch (error:Error) {
 imgMc.addChild(image);
 try {
 if (imgObject.URL != undefined) {
 imgMc.buttonMode = true;
 imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
 imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
 } catch (err:Error) {
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
 private function onImageClicked(evt:MouseEvent):void {
 trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
 private function onImgLoadProgress(Evt:ProgressEvent):void {
 if (Evt.bytesLoaded>0) {
 loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
 private function onImageLoadFailed(Evt:IOErrorEvent):void {
 trace("Image Loading Failed");
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
 for (var i=0; i < 3; i++) {
 var imgLoader:ImageLoader=new ImageLoader();
 imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
 var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
 target.list_mc.visible=false;
 var imgObj:Object=new Object;
 imgObj.FilePath=list[i].Thumbnail;
 imgObj.Url=list[i].Url;
 imgObj.Target=list[i].Target;
 target.list_mc.urlObj=new Object ;
 target.list_mc.urlObj=imgObj;
 imgLoader.loadImage(pass the image file's path/name);
 target.list_mc.lable_txt.htmlText="" + list[i].Label + "";
 target.list_mc.imgholder_mc.buttonMode=true;
 target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
 mcCount++;

HT1926 having problem up loading Itunes, comes up that 'Apple mobile Device failed to start. Verify that you have sufficient privileges to start system services' how do i fix this??

I am having problems up loading Itunes, comes up that 'Apple mobile Device failed to start. Verify that you have sufficient privileges to start system services' how do i fix this??

Hello hurleygirl63,
Thank you for the details of the issue you are experiencing with iTunes. I recommend following the steps in the article below:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problem in loading data to DSO

Hi,
I have a problem in loading the data to DSO through Info package. The delta request has been running for a long time, but no data has been loaded. The job details screen is showing as below.
Previously there was no issues with this chain.
Can some one guide me to solve this issue please.?
Regards
Ragu

Hi Ragu,
The same issue has been happened for me long time back. I have solved this issue by running the Repair Full request and then Init. delta without Data Transfer.
May be this may also work for you.
Steps:
1.Delete the request by marking it as RED
2.Run Info package Repair full Request.
Once this is success,
3.Change Info package and Run Init delta without data transfer
4. If it pop ups Init Delta already exists,then delete the previous init from the source.
after the init delta is ended fine, then change your Info package to Delta as it is before.
Hope it helps.
regards
Deva

Problem in loading Ntriple to Oracle

Hello,
Can some one please point what could be wrong in loading of Data in Ntriple format using the Code provide by Oracle to convert RDF data in N-Triple format to
Oracle's RDF storage type, SDO_RDF_TRIPLE_S in Oracle10g R2.
called TestNTriple2NDM.java
C:\prateek\semdis\sdordf_converter>java TestNTriple2NDM Data/timestamp.nt TIMEST
AMP_RDF_DATA TIMEMODEL 3
ID: 1403 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 322
ID: 3641 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 322
ID: 5835 Error: java.sql.SQLException: Unsupported feature
Rows: 10000
ID: 10754 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 322
ID: 10755 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 322
ID: 10868 Error: java.sql.SQLException: Unsupported feature
ID: 12002 Error: java.sql.SQLException: Unsupported feature
ID: 12818 Error: java.sql.SQLException: Unsupported feature
time (sec): 2342.0
time (min): 39.03333333333333
It loads the data,but I see all these errors.
Thanks
Prateek

Hi Prateek,
I have posted a response at Problem in loading Ntriple to Oracle .
Melli

Problem in loading transactional data from to 0MKT_DSO1(ods) to 0MKTG_C01

Hi,
I am trying to load lead transaction data to the standard Crm lead management cube from ODS.There is a problem while loading transaction data from 0MKT_DSO1(ods) to the infocube 0MKTG_C01 as the field 0STATECSYS2(CRM STATUS) is set to 10 in ods -meaning incorrect transaction. This feild is not there in the infocube.
There is a routine in the cube that deletes data records with (0statecsys2) set to 10.
THIS field is not coming in the transaction.
so, where can i see the master data in crm source system? and why is that feild getting set to 10 ?
thanks in advance!

Thanks for the reply..
I have checked the Fact table which shows
1. packet Dimension
2. Time dimension
3. Unit dimension.
I have kept the 0CALDAY as the time characteristics.
Sample data i have loaded from ODS to Cube.
Sample data in ODS.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
I have loaded this data in Cube with Full Upload.
Data in Cube.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
Again i am loading the same data to cube
Data in cube after loading.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
800001___________12/02/2009____15
The data is duplicated and it is not cumulating.
Am i missing anything on this.
Pls help..
Thanks,
Siva.

Problem in Loading a report

Hi there,
We have a problem on loading a report.
For some users, when they try to load the report the system prompts for username/ password.
This is a Web application system, where we use Windows authentication and impersonate=true.
I suppose that this problem might occur since users do not have access to C\Windows\Temp.
Thought for security reasons we do not want to give access to the users in this directory, and we do not want to change the temporary directory of windows ( from changing Temp Environment Variable)
We have also try thr bellow solution with no results:
"To change the CR temp folder, in registry, set the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Crystal Decisions
Report Application Server\InProcServer\TempDir "
Is tehre any way to change the default loading path for reports from C:\Windows\Temp to somthing else?
Thanks for your help.

Hello Maria,
the reg key you are describing is for inproc RAS. In my opinion this has only limited importance for your problem as you more likely have a user authentication issue.
Please try to narrow down the problem that 'some user can / others can't log in'.
What is the difference between these users ? Please check the database settings / possible roles for these accounts.
Please also see if these user can access the reports in the designer or if they get the same database issue. Is it just one report / a group of reports or all reports where you face that issue ?
Thanks a lot
Falk

Problem in Loading Material Hierarchy

Hi,
I am having problem while loading material hierarchy from R/3. Whenever i execute infopackage for infosource 0MATERIAL, I am getting following error msg.
The node name for ID 00005983 contains invalid characters
Diagnosis :
Node name DVD77ELR-D2 with node ID 00007774 contains lower case
letters or characters that are not permitted.
System response:
Processing was terminated
Procedure:
Change the node name so that it only contains permitted characters.
Procedure for System Administration
As a result the Request is in RED state.
Please suggest any solution ASAP.
Regards
Prasad
Note: Ponits will be awarded for fast and correct response.

Hi...
Thank you all for reply.
I have solved the problem. But this was not related to RSKC.
This was due to a material code DVD77ELR-D2 which was not created correctly. I have removed the hierarchy assigned to this material and marked it for deletion.
Now the hierarchy has been loaded perferctly.
Regards
Prasad

Problem in loading Rex

I hv problems in loading my rex file(SQL*ReportWriter5
101147). The rex on loading says
"SRW-1806: Abnormal condition: Internal error while reading from
loadfile." Unable to trace the error. The rex seems to be
normal. I am in the process of migration. Pls. help me out.

I think the problem is the asynchronous loading of the gif.
when you call f(icon.getImageLoadStatus() == MediaTracker.COMPLETE)
I think it is comming back MediaTracker.LOADING .
for an animated gif, it may not come back COMPLETE until after running thru
the whole automation. instead you could just check:
(icon.getImageLoadStatus() != MediaTracker.ERRORED)

Problem in loading large data to SDE using Shp2sde command

Hi,
When we try load data to SDE (Oracle 8.1.5, Sun solaris 2.6)using shp2sde command, we get the following error message and the data is loaded partially:-
" SDE: Shape #2560 is an invalid entity type for layer station.
3337 features converted
3337 features stored "
The shape file had 4352 features of type point.
If the same data is splitted into 2 (one having 1906 features and another having 2446 features), there is no problem in loading.
The giomgr.log file had the following lines corresponding to this
loading.
Process 9512, R/T calls 14, features read 0, wrote 3337, locks 0,
buffers 1, partial 0, buffered features 3337, buffered data 555K
We suspect this is due some size specified somewhere which limits
loading of all the data. So our DBA granted SDE user quota unlimited to SDE tablespace. After the granting, everything works fine, we can load the data. But when we restart the server, the same error appear again.
We are encountering this error in production but not in the devt environment. We urgently need to solve this problem. Anyone has solution to this problem?
Thanks.
null

<BLOCKQUOTE>quote:<HR>Originally posted by Gerjan Walrecht ([email protected]):
What is your commit interval? (-c ...)<HR></BLOCKQUOTE>
My commit interval is 1000. Even if I reduce the commit to 500, the result is still the same.
I was wandering is there anywhere where Oracle limit the size of the loading? or Kernel.. etc
null

Problem in loading a DTP

Similar Messages

Maybe you are looking for