Problem in loading data from one DSO to another
Hi All,
I am using Multicube 0PM_MP03, this mutli cube use DSO 0PM_DS02 & 0PM_DS01, data will flow from PSA to 0PM_DS01 & then to 0PM_DS02 using a Update rule, i have triggered my infopackage & i can see data in 0PM_DS01 & i have activated the data in 0PM_DS01, now on right click on 0PM_DS01 i click on the option Additional Functions -> Update 3.x Data to Target, now the request status is green in 0PM_DS02 but i cannot see any data in this DSO, neither in new or active, can anyone help me out in this where i am doing wrong.
Thanks,
Pritam.
Hi Pritam,
This is strange, Check the below points.
1. If the number of records added 0, in manage of DSO2?
2. Confirm if there is a transfprmation between ODS1 & ODS2. If there is, you need to use a DTP (not Additional Functions -> Update 3.x Data to Target).
3. Activate the request and then check.
4. Maintain PSA for the datasource 80PM_DS01 and when loading data from DSO1 to DSO2 choose option PSA and then into targets.
Regards,
Panksj.
Similar Messages
-
Problem in loading data from one DSO to onother DSO in BI7
Hi
Iam loading data from one DSO to onother, After executing DTP Iam getting error message as "Aggregation NOP not allowed on DB (key figure 0DSCT_DAYS1) ", Here 0DSCT_DAYS1 is the keyfigure aggragation type is "NOP" , exception aggregation is " No aggregation(X if more than one value unique to 0 occurs)"
Please kindly give me solution .
Radha KrishnaWe had this issue in our project. It mainly arises when you have written start routine in transformation. At start routine level it can not aggregate the fields for which NOP is set & that's why it throws an error.
Please check the load by removing the start routine. If it works then introduce a data target in between which has exactly same structure as previous data target except the fields with NOP aggregation. -
Data load failed while loading data from one DSO to another DSO..
Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
SnehaHi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR -
ABAP Dumps while loading data form one DSO to another DSO
Hi All,
We are getting following ABAP dump while loading data from one DSO to another DSO.
Please find below ABAP Dump we are getting.
Please let us know how we can resolve this issue.
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_X
ABAP Program CL_RSBK_CMD_DP_LOOP===========CP
Application Component BW-WHM-DST
Date and Time 30.05.2014 07:10:03
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Invalid program status
Long text of error message:
Technical information about the message:
Message class....... "RSBK"
Number.............. 299
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_RSBK_CMD_DP_LOOP===========CP" or "CL_RSBK_CMD_DP_LOOP===========CM00Q"
"GET_LOG"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP Release..... 731
SAP Basis Level. 0004
Application server... "cab-bi-prod1"
Network address...... "10.10.72.43"
Operating system..... "Windows NT"
Release.............. "6.1"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 12
Shortdump setting.... "full"
Database server... "nguksvamds039"
Database type..... "ORACLE"
Database name..... "PWB"
Database user ID.. "SAPSR3"
Terminal.......... " "
Char.set.... "C"
SAP kernel....... 720
created (date)... "Dec 20 2011 02:14:54"
create on........ "NT 6.0 6002 S x86 MS VC++ 16.00"
Database version. "OCI_11201_SHARE, 11.2.0.3.0 "
Patch level. 117
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 720
Operating system..... "Windows NT 5.1, Windows NT 5.2, Windows NT 6.0, Windows
NT 6.1"
Memory consumption
Roll.... 0
EM...... 12569376
Heap.... 0
Page.... 24576
MM Used. 3422928
MM Free. 764192
User and Transaction
Client.............. 100
User................ "THARDEEP"
Language key........ "E"
Transaction......... " "
Transaction ID...... "03C1E7E3F560F14CA2AD00505698028E"
EPP Whole Context ID.... "53873353A7E31150E10080000A0A2142"
EPP Connection ID....... 00000000000000000000000000000000
EPP Caller Counter...... 0
Program............. "CL_RSBK_CMD_DP_LOOP===========CP"
Screen.............. "SAPMSSY0 1000"
Screen Line......... 6
Debugger Active..... "none"
Information on where terminated
Termination occurred in the ABAP program "CL_RSBK_CMD_DP_LOOP===========CP" -
in "GET_LOG".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 7
of the (Include) program "CL_RSBK_CMD_DP_LOOP===========CM00Q".
The program "CL_RSBK_CMD_DP_LOOP===========CP" was started as a background job.
Job Name....... "BIDTPR_10616_1"
Job Initiator.. "THARDEEP"
Job Number..... 07100200
Source Code Extract
Line SourceCde
1 METHOD get_log.
2 DATA: l_r_request TYPE REF TO cl_rsbk_request.
3 IF p_r_log IS INITIAL.
4 TRY.
5 l_r_request = cl_rsbk_request=>create_from_db( if_rsbk_cmd~n_requid ).
6 CATCH cx_rs_not_found.
>>>>> MESSAGE x299(rsbk).
8 ENDTRY.
9 IF l_r_request->get_uses_new_log( ) = rs_c_false.
10 p_r_log = cl_rsbm_log_cursor_process=>create_for_process( i_r_process ).
11 ELSE.
12
13 TRY.
14 DATA l_runid TYPE rsbrun.
15 l_runid = l_r_request->get_runid( ).
16 IF l_runid = 0.
17 l_runid = 1.
18 ENDIF.
19 p_r_log = cl_rsbm_log_cursor_process_dtp=>create_new(
20 i_requid = if_rsbk_cmd~n_requid
21 i_runid = l_runid ).
22 IF n_datapakid IS NOT INITIAL.
23 p_r_log->goto_datapackage( n_datapakid ).
24 ENDIF.
25 CATCH cx_rs_not_found .
26 MESSAGE x299.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 1
SY-TABIX 0
SY-DBCNT 1
SY-FDPOS 25
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Batch Process
SY-MSGTY X
SY-MSGID RSBK
SY-MSGNO 299
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20140530
SY-UZEIT 071002
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
7 METHOD CL_RSBK_CMD_DP_LOOP===========CP CL_RSBK_CMD_DP_LOOP===========CM00Q 7
CL_RSBK_CMD_DP_LOOP=>GET_LOG
6 METHOD CL_RSBK_CMD_DP_LOOP===========CP CL_RSBK_CMD_DP_LOOP===========CM00J 38
CL_RSBK_CMD_DP_LOOP=>SET_DP_IN_PROCESS
5 METHOD CL_RSBK_CMD_DP_LOOP===========CP CL_RSBK_CMD_DP_LOOP===========CM00B 9
CL_RSBK_CMD_DP_LOOP=>IF_RSBK_CMD~SET_PROCESS_PARAMETERS
4 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM00E 15
CL_RSBK_PROCESS=>SET_MEMENTO
3 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM003 30
CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~GET_OBJECT_REF
2 FUNCTION SAPLRSBATCH LRSBATCHU13 428
RSBATCH_EXECUTE_PROCESS
1 EVENT RSBATCH_EXECUTE_PROZESS RSBATCH_EXECUTE_PROZESS 374
START-OF-SELECTION
Chosen variables
Name
Val.
No. 7 Ty. METHOD
Name CL_RSBK_CMD_DP_LOOP=>GET_LOG
I_R_PROCESS
{O:1*\CLASS=CL_RSBK_PROCESS}
F0000000
E0001000
FE00000001000000
SCREEN
%_17NNS0005639652_%_%_%_%_%_%_
2533445333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F17EE30005639652F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
25005F00310037004E004E00530030003000300035003600330039003600350032005F0025005F0025005F0025005F
SPACE
2
0
0
0
2000
SY-REPID
CL_RSBK_CMD_DP_LOOP===========CP
4455544544454554445333333333334522222222
3CF232BF3D4F40FCFF0DDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
43004C005F005200530042004B005F0043004D0044005F00440050005F004C004F004F0050003D003D003D003D003D
ME->IF_RSBK_CMD~N_REQUID
0
0000
0000
00000000
L_R_REQUEST
{O:initial}
F0000000
F0000000
FF00000000000000
%_DUMMY$$
2222
0000
0000
0000
2000200020002000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
53004100500043004E0056004500200020002000200020002000200020002000200020002000200020002000200020
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
SY-MSGID
RSBK
55442222222222222222
232B0000000000000000
00000000000000000000
00000000000000000000
5200530042004B002000200020002000200020002000200020002000200020002000200020002000
SY-MSGNO
299
333
299
000
000
320039003900
SY-MSGV1
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
%_##TVREG_001
2
0
0
0
2000
RS_C_FALSE
2
0
0
0
2000
No. 6 Ty. METHOD
Name CL_RSBK_CMD_DP_LOOP=>SET_DP_IN_PROCESS
I_R_PROCESS
{O:1*\CLASS=CL_RSBK_PROCESS}
F0000000
E0001000
FE00000001000000
I_DATAPAKID
000236
333333
000236
000000
000000
300030003000320033003600
L_TH_RANGE_X
Table[initial]
L_S_RANGE_X
2222222222222222222222222222220022222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
L_TH_RANGE
Table[initial]
L_S_RANGE
2222222222222222222222222222220022222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
RSBC_C_DPSTATE-ACTIVE
5
3
5
0
0
3500
L_R_ROOT
{O:1091*\CLASS=CX_RS_FAILED}
B0004000
C0003400
BC00000043040000
ME
{O:72*\CLASS=CL_RSBK_CMD_DP_LOOP}
B0004000
70008000
B700000048000000
ME->P_R_LOG
{O:initial}
F0000000
F0000000
FF00000000000000
No. 5 Ty. METHOD
Name CL_RSBK_CMD_DP_LOOP=>IF_RSBK_CMD~SET_PROCESS_PARAMETERS
I_MEMENTO
ÿ#######4103##############D#####################D#A#T#A#P#A#K#I#D#¼####0#0#0#2#3#6#½#
F00000803333000000000000004000000000000000000000404050405040404040B0000303030303030B0
F621120041030000160000C0004900000000000000000000401040100010B09040C000C000000203060D4
FF0602010102800034313033000000000106000000000C000000440900000000000000000000000000000000000000
I_R_PROCESS
{O:1*\CLASS=CL_RSBK_PROCESS}
F0000000
E0001000
FE00000001000000
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
43004F004E00560045005200530049004F004E005F0045005800490054002000200020002000200020002000200020
SY-SUBRC
0
0000
0000
00000000
ME->N_DATAPAKID
000236
333333
000236
000000
000000
300030003000320033003600
ME
{O:72*\CLASS=CL_RSBK_CMD_DP_LOOP}
B0004000
70008000
B700000048000000
No. 4 Ty. METHOD
Name CL_RSBK_PROCESS=>SET_MEMENTO
I_TH_CMD_MEMENTO
Table IT_42[5x52]
\CLASS=CL_RSBK_PROCESS\METHOD=IF_RSBATCH_EXECUTE~GET_OBJECT_REF\DATA=L_S_PROCESS-TH_CMD_MEMENT
Table reference: 21
TABH+ 0(20) = 10C64700DF070000000000000000000000000000
TABH+ 20(20) = 150000002A000000050000003400000020000000
TABH+ 40(16) = 045A0000A006000005000000A425C000
store = 0x10C64700DF070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 21 (0x15000000)
label = 42 (0x2A000000)
fill = 5 (0x05000000)
leng = 52 (0x34000000)
loop = 32 (0x20000000)
xtyp = TYPE#000010
occu = 5 (0x05000000)
accKind = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUniYes)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
stMode = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
isUsed = 1
isCtfyAble = 1
hasScndKeys = 0
hasRowId = 0
scndKeysOutdated = 0
scndUniKeysOutdated = 0
----- Shareable Table Header Data -----
tabi = 0x607B4100DF070000
pgHook = 0x0000000000000000
idxPtr = 0xC08D5000DF070000
id = 36 (0x24000000)
shmTabhSet = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 5 (0x05000000)
lineAlloc = 5 (0x05000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
rowId = 18446744073709551615
scndKeyAdmin = 0x0000000000000000
##LOOP_DP ###쀀
00444554522222222222221000
30CFF0F4000000000000004020
0000000000000000000000000C
00000000000000000000000000
030000004C004F004F0050005F00440050002000200020002000200020002000200020002000200020002000140000
##X_DATASTORE ###쀀
00554454554542222222221000
408F414134F250000000004030
0000000000000000000000000C
00000000000000000000000000
0400000058005F004400410054004100530054004F0052004500200020002000200020002000200020002000140000
##ERROR_FILTER ###쀀
FF455455444545222222221000
FF522F2F69C452000000004040
FF00000000000000000000000C
FF000000000000000000000000
FFFFFFFF4500520052004F0052005F00460049004C0054004500520020002000200020002000200020002000140000
##TRFN ###쀀
FF554422222222222222221000
EF426E00000000000000004040
FF00000000000000000000000C
FF000000000000000000000000
FEFFFFFF5400520046004E002000200020002000200020002000200020002000200020002000200020002000140000
##U_ODSO ###쀀
00554454222222222222221000
605FF43F000000000000004040
0000000000000000000000000C
00000000000000000000000000
0600000055005F004F00440053004F0020002000200020002000200020002000200020002000200020002000140000
%_DUMMY$$
2222
0000
0000
0000
2000200020002000
SYST
##########################A###P#######|#########<#############################T#########XC####
0000000000000000000000100040005000000070000000003000000000000000000000000000105000100000540000
10000010000010000000109010101000000000C000000000C000000000000000000000000000604000E00000830500
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
0100000000000000000000000100000000000000000000000100000000000000000000000000000001000000190000
SYST-REPID
CL_RSBK_PROCESS===============CP
4455544555444553333333333333334522222222
3CF232BF02F3533DDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
43004C005F005200530042004B005F00500052004F0043004500530053003D003D003D003D003D003D003D003D003D
L_R_ERROR
{O:initial}
F0000000
F0000000
FF00000000000000
L_S_CMD_MEMENTO
##LOOP_DP ###쀀
00444554522222222222221000
30CFF0F4000000000000004020
0000000000000000000000000C
00000000000000000000000000
030000004C004F004F0050005F00440050002000200020002000200020002000200020002000200020002000140000
ME->P_TH_CMD_R
Table IT_724[8x48]
{O:1*\CLASS=CL_RSBK_PROCESS}\DATA=P_TH_CMD_R
Table reference: 353
TABH+ 0(20) = 00306E00DF070000000000000000000000000000
TABH+ 20(20) = 61010000D40200000800000030000000FFFFFFFF
TABH+ 40(16) = 04E100005042030009000000BC25C800
store = 0x00306E00DF070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 353 (0x61010000)
label = 724 (0xD4020000)
fill = 8 (0x08000000)
leng = 48 (0x30000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000037
occu = 9 (0x09000000)
accKind = 4 (ItAccessHashed)
idxKind = 3 (ItIndexList)
uniKind = 1 (ItUniYes)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
stMode = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
isUsed = 1
isCtfyAble = 1
hasScndKeys = 0
hasRowId = 0
scndKeysOutdated = 0
scndUniKeysOutdated = 0
----- Shareable Table Header Data -----
tabi = 0x302E6E00DF070000
pgHook = 0x0000000000000000
idxPtr = 0x80306E00DF070000
id = 647 (0x87020000)
shmTabhSet = 0x0000000000000000
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 9 (0x09000000)
lineAlloc = 9 (0x09000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
rowId = 18446744073709551615
scndKeyAdmin = 0x0000000000000000
########P Í#2# #
000000005222222222C03020
103000000000000000D02000
000000000000000000000000
000000000000000000000000
010000000300000000000000000000005000200020002000200020002000200020002000CD00000032000000200000
########P ·#H# #
000000005222222222B04020
300040100000000000708000
000000000000000000000000
000000000000000000000000
030000000000000004000000010000005000200020002000200020002000200020002000B700000048000000200000
########X ¶#I# #
00FF00005222222222B04020
40FF70108000000000609000
00FF00000000000000000000
00FF00000000000000000000
04000000FFFFFFFF07000000010000005800200020002000200020002000200020002000B600000049000000200000
########T °#O# #
FF00FF005222222222B04020
FF00EF40400000000000F000
FF00FF000000000000000000
FF00FF000000000000000000
FFFFFFFF00000000FEFFFFFF040000005400200020002000200020002000200020002000B00000004F000000200000
########T ®#Q# #
FF0000005222222222A05020
EF0060404000000000E01000
FF0000000000000000000000
FF0000000000000000000000
FEFFFFFF0000000006000000040000005400200020002000200020002000200020002000AE00000051000000200000
L_S_CMD_R
########P ·#H# #
000000005222222222B04020
300040100000000000708000
000000000000000000000000
000000000000000000000000
030000000000000004000000010000005000200020002000200020002000200020002000B700000048000000200000
SY-REPID
CL_RSBK_PROCESS===============CP
4455544555444553333333333333334522222222
3CF232BF02F3533DDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
43004C005F005200530042004B005F00500052004F0043004500530053003D003D003D003D003D003D003D003D003D
CX_RS_STEP_FAILED=>FAILED_IN_PARALLEL_MODE
L_S_CMD_MEMENTO-NODE
3
0000
3000
03000000
SY-SUBRC
0
0000
0000
00000000
L_S_CMD_MEMENTO-MEMENTO
ÿ#######4103##############D#####################D#A#T#A#P#A#K#I#D#¼####0#0#0#2#3#6#½#
F00000803333000000000000004000000000000000000000404050405040404040B0000303030303030B0
F621120041030000160000C0004900000000000000000000401040100010B09040C000C000000203060D4
FF0602010102800034313033000000000106000000000C000000440900000000000000000000000000000000000000
ME
{O:1*\CLASS=CL_RSBK_PROCESS}
F0000000
E0001000
FE00000001000000
No. 3 Ty. METHOD
Name CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~GET_OBJECT_REF
I_PROCESS_TYPE
DTP_LOAD
4555444422
440FCF1400
0000000000
0000000000
4400540050005F004C004F004100440020002000
I_BATCH_ID
DTPR_10616_1
455553333353222222222222222222
4402F10616F1000000000000000000
000000000000000000000000000000
000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
I_BATCH_PROCESS
238
2222223332
0000002380
0000000000
0000000000
2000200020002000200020003200330038002000
I_PARAMETER
ۿĂȁ#ㄴ㌰##༅##(Ѐޱ##########PROCESSྫ##ꨨ##Ѐڪ##ꨌ##Ѐ###ꨄ##Ѐª##ꨂ##Ȁྭ##ꨴ##Ѐª##ꨨ###ྮ##갴##⠀¼#砠) ㈀㌀㘀##ÿ#
F008330000020B00000000005544455A002000A000000A000000A000000A003000A002100A003000B0220000000FF0
F2104000500801000000000002F3533B008800A00C800A004800A002000D004800A008400E004F00C0090000000FF0
0000330000000000000000000000000000A000000A000000A000000A000000A000000A000000A0020070333333FF00
61201300F0004700000000000000000F00A004600A004800A004000A002F00A004000A008F00C0080080000236FF00
FF060201010280003431303300000000050F0000000028000004B10700000000000000000000000000000000000000
R_R_RSBATCH_EXECUTE
{O:initial}
F0000000
F0000000
FF00000000000000
L_S_PROCESS-PROCESSTYPE
2
0
0
0
2000
L_S_PROCESS-NO_COMMIT
2
0
0
0
2000
L_R_PROCESS
{O:1*\CLASS=CL_RSBK_PROCESS}
F0000000
E0001000
FE00000001000000
L_S_PROCESS-DATAPAKID
000236
333333
000236
000000
000000
300030003000320033003600
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
L_S_PROCESS-NODE
-1
FFFF
FFFF
FFFFFFFF
L_S_PROCESS-TH_CMD_MEMENTO
Table IT_42[5x52]
No. 2 Ty. FUNCTION
Name RSBATCH_EXECUTE_PROCESS
ID
DTPR_10616_1
455553333353222222222222222222
4402F10616F1000000000000000000
000000000000000000000000000000
000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
I_DIALOG_DEBUG_MODE
2
0
0
0
2000
PROCESS
238
E000
E000
EE000000
G_T_COLS[]
Table[initial]
SY-REPID
SAPLRSBATCH
5454554454422222222222222222222222222222
310C232143800000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5300410050004C00520053004200410054004300480020002000200020002000200020002000200020002000200020
L_MODULE_TYPE
M
4
D
0
0
4D00
G_PROCESS_TYPE
2222222222
0000000000
0000000000
0000000000
2000200020002000200020002000200020002000
%_FL2*CTRL_200_WAIT
<initial>
<initial>
<initial>
<<iinniittiiaall>>
ICON_SELECT_DETAIL
@16@
4334
0160
0000
0000
4000310036004000
L_S_CTRL-LANGU
E
4
5
0
0
4500
SY-LANGU
E
4
5
0
0
4500
SYST-REPID
SAPLRSBATCH
5454554454422222222222222222222222222222
310C232143800000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5300410050004C00520053004200410054004300480020002000200020002000200020002000200020002000200020
SYST
##########################A###P#######|#########<#############################T#########XC####
0000000000000000000000100040005000000070000000003000000000000000000000000000105000100000540000
10000010000010000000109010101000000000C000000000C000000000000000000000000000604000E00000830500
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
0100000000000000000000000100000000000000000000000100000000000000000000000000000001000000190000
%_FL2*CTRL_1100
<initial>
<initial>
<initial>
<<iinniittiiaall>>
%_DUMMY$$
2222
0000
0000
0000
2000200020002000
L_MODULE_NAME
CL_RSBK_PROCESS
4455544555444552222222222222222222222222
3CF232BF02F35330000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
43004C005F005200530042004B005F00500052004F0043004500530053002000200020002000200020002000200020
%_SPACE
2
0
0
0
2000
G_T_BATCH_SERV
00
22222222222222222222222222222222222222222222222222222222222222222222222222222222233
00000000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
L_S_CTRL-PROCESS_TYPE
DTP_LOAD
4555444422
440FCF1400
0000000000
0000000000
4400540050005F004C004F004100440020002000
G_SUBRC
0
0000
0000
00000000
L_S_CTRL-BATCH_ID
DTPR_10616_1
455553333353222222222222222222
4402F10616F1000000000000000000
000000000000000000000000000000
000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
OKCODE
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
L_S_CTRL-BATCH_PROCESS
238
2222223332
0000002380
0000000000
0000000000
2000200020002000200020003200330038002000
SAVEOK
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
L_PARAMETER
ۿĂȁ#ㄴ㌰##༅##(Ѐޱ##########PROCESSྫ##ꨨ##Ѐڪ##ꨌ##Ѐ###ꨄ##Ѐª##ꨂ##Ȁྭ##ꨴ##Ѐª##ꨨ###ྮ##갴##⠀¼#砠) ㈀㌀㘀##ÿ#
F008330000020B00000000005544455A002000A000000A000000A000000A003000A002100A003000B0220000000FF0
F2104000500801000000000002F3533B008800A00C800A004800A002000D004800A008400E004F00C0090000000FF0
0000330000000000000000000000000000A000000A000000A000000A000000A000000A000000A0020070333333FF00
61201300F0004700000000000000000F00A004600A004800A004000A002F00A004000A008F00C0080080000236FF00
FF060201010280003431303300000000050F0000000028000004B10700000000000000000000000000000000000000
L_R_BATCH_EXECUTE
{O:initial}
F0000000
F0000000
FF00000000000000
L_RETURN
<empty string>
10000000
40001000
1400000001000000
L_T_MSG
Table[initial]
%_TAG*CTRL_200_VAL
<initial>
<initial>
<initial>
<<iinniittiiaall>>
G_CURSOR_LINE
0
0000
0000
00000000
SY-SUBRC
0
0000
0000
00000000
No. 1 Ty. EVENT
Name START-OF-SELECTION
L_T_CTRL
Table IT_26[1x424]
\PROGRAM=RSBATCH_EXECUTE_PROZESS\DATA=L_T_CTRL
Table reference: 15
TABH+ 0(20) = D08B4C00DF070000000000000000000000000000
TABH+ 20(20) = 0F0000001A00000001000000A8010000FFFFFFFF
TABH+ 40(16) = 040000005090000004000000C130C000
store = 0xD08B4C00DF070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 15 (0x0F000000)
label = 26 (0x1A000000)
fill = 1 (0x01000000)
leng = 424 (0xA8010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000013
occu = 4 (0x04000000)
accKind = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniNo)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
stMode = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
isUsed = 1
isCtfyAble = 1
hasScndKeys = 0
hasRowId = 0
scndKeysOutdated = 0
scndUniKeysOutdated = 0
----- Shareable Table Header Data -----
tabi = 0x10854C00DF070000
pgHook = 0x508C4C00DF070000
idxPtr = 0x0000000000000000
id = 21 (0x15000000)
shmTabhSet = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 508 (0xFC010000)
lineAlloc = 12 (0x0C000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
rowId = 18446744073709551615
scndKeyAdmin = 0x0000000000000000
DTPR_10616_1 238
4555533333532222222222222222222222223332222222222222222222222222222222222222222222222222222222
4402F10616F10000000000000000000000002380000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
SYST
##########################A###P#######|#########<#############################T#########XC####
0000000000000000000000100040005000000070000000003000000000000000000000000000105000100000540000
10000010000010000000109010101000000000C000000000C000000000000000000000000000604000E00000830500
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
0100000000000000000000000100000000000000000000000100000000000000000000000000000001000000190000
L_S_CTRL
DTPR_10616_1 238 BIDTPR_10616_1 07100200cab-bi-prod1_
4555533333532222222222222222222222223332244455553333353222222222222222222333333336662662776635
4402F10616F100000000000000000000000023800294402F10616F100000000000000000007100200312D29D02F41F
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
SCREEN
%_17NNS0005639652_%_%_%_%_%_%_
2533445333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F17EE30005639652F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
25005F00310037004E004E00530030003000300035003600330039003600350032005F0025005F0025005F0025005F
L_S_CTRL-BATCH_PROCESS
238
2222223332
0000002380
0000000000
0000000000
2000200020002000200020003200330038002000
%_SPACE
2
0
0
0
2000
L_S_PAR-WP_NO
12
332
120
000
000
310032002000
ID
DTPR_10616_1
455553333353222222222222222222
4402F10616F1000000000000000000
000000000000000000000000000000
000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
L_PROCESS
238
E000
E000
EE000000
L_S_HEADER-HOLD_PAR_PROCS
X
5
8
0
0
5800
SY
##########################A###P#######|#########<#############################T#########XC####
0000000000000000000000100040005000000070000000003000000000000000000000000000105000100000540000
10000010000010000000109010101000000000C000000000C000000000000000000000000000604000E00000830500
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
0100000000000000000000000100000000000000000000000100000000000000000000000000000001000000190000
PROCESS
999999999
FC93
F9AB
FFC99A3B
Internal notes
The termination was triggered in function "ab_jmess"
of the SAP kernel, in line 1411 of the module
"//bas/720_REL/src/krn/runt/abdynpro.c#7".
The internal operation just processed is "MESS".
Internal mode was started at 20140530071002.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=1724)
When : 5/30/2014 7:9:54.12
Threads : 2
Computer Name : NGUKSVRMDS040
User Name : pwbadm
Number of Processors: 4
Processor Type: Intel64 Family 6 Model 37 Stepping 1
Windows Version : 6.1 Current Build: 7601
State Dump for Thread Id 1374
0000000002178EF0 0000000140F6F2A1 0020002000200020 disp+work!DumpStacks [ntstcdbg.c (548)]
0000000002178FF0 000000013FB0E304 0000000074D126B0 disp+work!NTDebugProcess [ntstcdbg.c (383)]
0000000002179020 000000013FD1C439 0000000074D126B0 disp+work!CTrcStack2 [dptstack.c (354)]
0000000002179070 000000013FD21A7F 0000000002179AD0 disp+work!rabax_CStackSave [abrabax.c (8649)]
0000000002179980 000000013FCD37FC 000000000000005C disp+work!ab_rabax [abrabax.c (1419)]
00000000021799C0 000000013FD0BBE1 0000000000000000 disp+work!ab_jmess [abdynpro.c (1418)]
0000000002179B50 000000013FD7E5D8 0000000000000001 disp+work!ab_extri [abextri.c (721)]
0000000002179BA0 000000013FD7EEC5 0000000000000001 disp+work!ab_xevent [abrunt1.c (278)]
0000000002179C30 000000013FD5C589 000007DF000002A0 disp+work!ab_trigg [abrunt1.c (57)]
0000000002179CC0 000000013FB77126 0000000000000016 disp+work!ab_run [absubmit.c (511)]
0000000002179E70 000000013FB7BA2D 0000000000000000 disp+work!dynpmcal [dymainstp.c (2732)]
0000000002179F00 000000013FB7ACDC 000000000217A0E0 disp+work!dynppai0 [dymainstp.c (1355)]
0000000002179FD0 000000013FB34EEF 0000000000000020 disp+work!dynprctl [dymainstp.c (470)]
000000000217F3C0 000000013F9C3CC0 0000000000000000 disp+work!dynpen00 [dymain.c (2026)]
000000000217F690 000000013F9C44BC FFFFFFFFFFFFFF00 disp+work!TskhLoop [thxxhead.c (4871)]
000000000217F6F0 000000013F8EC603 00000000000D9E9C disp+work!ThStart [thxxhead.c (1195)]
000000000217F790 000000013F8C10A1 FFFFFFFF00000001 disp+work!DpMain [dpxxdisp.c (1174)]
000000000217F7C0 0000000141246B8E 0000000000000001 disp+work!nlsui_main [thxxanf.c (80)]
000000000217F7F0 000000007799652D 0000000000000000 disp+work!__tmainCRTStartup [crtexe.c (552)]
000000000217F820 0000000077ACC541 0000000000000000 kernel32!BaseThreadInitThunk
000000000217F870 0000000000000000 0000000000000000 ntdll!RtlUserThreadStart
State Dump for Thread Id 290
000000000E0BF880 000007FEFDAB3C2F 00000000DBAAC265 ntdll!NtFsControlFile
000000000E0BF8F0 0000000141139FAF FFFFFFFFFFFFFFFE KERNELBASE!ConnectNamedPipe
000000000E0BF990 0000000074C81D9F 00000000024BC0D0 disp+work!SigIMsgFunc [signt.c (717)]
000000000E0BF9C0 0000000074C81E3B 0000000074D12AC0 MSVCR100!endthreadex
000000000E0BF9F0 000000007799652D 0000000000000000 MSVCR100!endthreadex
000000000E0BFA20 0000000077ACC541 0000000000000000 kernel32!BaseThreadInitThunk
000000000E0BFA70 0000000000000000 0000000000000000 ntdll!RtlUserThreadStart
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg RSBATCH_EXECUTE_PROZESS 0 13.08.2013 12:28:38 45056 E
1 Prg SAPMSSY0 1 13.08.2013 09:12:51 111616 E
2 Prg SAPMSSYD 1 13.08.2013 10:17:05 23552 E
3 Prg SAPFSYSCALLS 1 07.03.2005 18:01:13 8192 E
4 Prg RSDBRUNT 0 13.08.2013 10:51:31 306176 E
5 Prg SAPLSPRI 5 13.08.2013 10:49:40 407552 E
6 Typ PRI_PARAMS 0 27.10.1998 15:01:35 5120
7 Typ ARC_PARAMS 0 08.08.1997 14:45:20 5120
8 Typ PRI_LAYOUT 0 04.09.2002 14:38:36 3072
9 Typ PRIPAR_EXT 0 09.09.2011 20:56:18 3072
10 Typ PRIPAR_EX2 0 09.09.2011 20:54:51 2048
11 Typ PRIPAR_EX3 0 09.09.2011 20:54:52 3072
12 Typ TPRI_DEF 0 01.02.2001 17:50:49 5120
13 Prg SAPLSPOO 13 13.08.2013 10:14:36 181248 E
14 Typ TSP03 0 13.08.1998 16:56:08 5120
15 Typ USR01 0 09.09.2011 20:55:50 4096
16 Typ TSP1D 0 09.09.2011 20:57:01 5120
17 Prg SAPLRSPOLSTDRV 17 28.05.2009 08:18:25 64512 E
18 Typ TSPOPTIONS 0 06.12.1996 16:09:18 2048
19 Prg SAPCNVE 19 07.03.2005 18:01:13 9216 E
20 Prg SAPLSPOC 20 09.09.2011 21:19:41 177152 E
21 Typ RSPOCHECK 0 14.07.1997 13:01:20 4096
22 Typ DEVPAR 0 09.09.2011 20:54:15 3072
23 Typ RSPOATTR 0 19.01.2000 18:34:33 2048
24 Typ RSSCR 0 23.11.1999 09:24:41 5120
25 Prg RSDBSPBL 0 07.03.2005 18:01:13 84992 E
26 Prg SAPDB__S 0 07.03.2005 18:01:13 21504 E
27 Typ VARID 0 28.05.2009 08:12:55 5120
28 Typ SSCRFIELDS 0 02.05.1997 13:16:39 5120
29 Prg RSDBSPVA 0 13.08.2013 10:51:31 160768 E
30 Prg %_CSYDB0 0 07.03.2005 18:01:13 40960 E
31 Typ RSVAMEMKEY 0 16.12.1996 19:31:50 2048
32 Prg RSDBSPMC 0 05.09.2006 14:14:08 92160 E
33 Typ DDSHDESCR 0 28.11.1997 16:26:30 4096
34 Typ SPPARAMS 0 07.03.1997 14:48:48 2048
35 Prg SAPLICON 35 13.12.2007 11:37:48 31744 E
36 Prg %_CICON 35 13.12.2007 11:37:48 126976 E
37 Typ ICONT 0 05.09.2006 14:14:08 2048
38 Prg SAPLSABE 38 09.09.2011 21:09:40 14336 E
39 Prg SAPLSECU 39 13.08.2013 10:16:43 110592 E
40 Typ RSSUBINFO 0 22.11.1999 21:15:17 3072
41 Prg RSDBSPVD 0 09.09.2011 21:33:31 102400 E
42 Typ DFIES 0 09.09.2011 20:54:19 10240
43 Typ VARI 0 16.12.1996 19:38:11 6144
44 Typ RSDSFIELDS 0 28.05.2009 08:12:29 3072
45 Prg %_CRSDS 0 07.03.2005 18:01:13 11264 E
46 Typ RSDSEXPR 0 16.12.1996 19:31:30 3072
47 Typ RVARI 0 18.06.1999 11:23:08 4096
48 Prg SAPLSVAR 48 13.08.2013 10:49:34 936960 E
49 Typ RSVARKEY 0 16.12.1996 19:31:51 2048
50 Prg SAPLSSEL 50 13.08.2013 10:42:32 1699840 E
51 Prg RSDBSPDS 0 13.12.2007 11:37:48 66560 E
52 Typ RSEXFCODE 0 18.07.1997 17:04:17 2048
53 Prg SAPLDSYA 53 13.08.2013 10:45:29 52224 E
54 Prg SAPFSDS1 53 07.03.2005 18:01:13 61440 E
55 Typ TDCLD 0 14.07.1998 14:53:43 5120
56 Prg SAPLSDOD 56 13.08.2013 10:42:31 50176 E
57 Typ DOKIL 0 07.04.1997 18:29:04 3072
58 Prg SAPLLANG 58 09.09.2011 21:12:32 11264 E
59 Typ T002 0 25.09.2007 11:09:36 2048
60 Prg SAPFSPOR 0 24.06.2008 18:36:49 16384 E
61 Typ RSPARINT 0 10.03.1995 17:53:00 2048
62 Prg SAPLSCNT 62 07.03.2005 18:01:13 34816 E
63 Prg SAPSHDTV 62 13.08.2013 08:38:56 38912 E
64 Prg SAPFGUICNTL 1 07.03.2005 18:01:13 27648 E
65 Prg SAPLOLEA 65 13.08.2013 08:38:34 110592 E
66 Prg SAPLSGUI 66 04.12.2009 20:43:32 105472 E
67 Prg SAPLSTTM 67 09.09.2011 21:26:18 79872 E
68 Prg SAPLSBDC 68 13.12.2007 10:50:07 49152 E
69 Prg SAPLSFES 69 13.08.2013 10:47:09 316416 E
70 Prg SAPLTHFB 70 13.08.2013 10:21:30 472064 E
71 Typ WPINFO 0 28.05.2009 08:12:57 6144
72 Prg SAPLURFC 72 13.08.2013 10:49:32 29696 E
73 Prg SAPLSPLUGIN 73 09.09.2011 21:19:29 9216 E
74 Typ SWCBCONT 0 09.09.2011 20:56:57 3072
75 Typ OLE_VERBS 0 09.02.1995 13:23:37 2048
76 Typ OLE_PA 0 13.01.1995 11:06:59 2048
77 Typ SSCRTEXTS 0 15.08.1997 14:15:15 3072
78 Prg SAPLRSBATCH 78 13.08.2013 12:29:38 689152 E
79 Prg /1BCDWBEN/SAPLREN0002 79 23.11.2005 13:29:42 294912 E
80 Prg SAPLSENA 80 28.05.2009 08:20:47 39936 E
81 Prg SAPLBTCH 81 13.08.2013 10:51:12 2248704 E
82 Prg SAPLRS_GENERAL 82 13.08.2013 12:20:02 120832 E
83 Prg /1BCDWBEN/SAPLREN0003 83 23.11.2005 13:29:44 282624 E
84 Prg SAPLSYDB 84 09.09.2011 21:28:17 65536 E
85 Typ MSXXLIST_V6 0 28.05.2009 08:12:22 4096
86 Typ BAL_S_MSG 0 09.09.2011 20:53:51 7168
87 Prg CL_RSBK_PROCESS===============CP 87 10.09.2011 08:11:36 103424 E
88 Prg IF_RSBATCH_CALLBACK===========IP 78 09.09.2011 22:39:45 9216 E
89 Prg IF_RSBATCH_EXECUTE============IP 78 09.09.2011 22:39:45 8192 E
90 Typ RSBK_S_PROCESS 0 09.09.2011 20:56:47 4096
91 Typ RSBK_S_CMD_MEMENTO 0 09.09.2011 20:54:56 2048
92 Prg CL_RSBK_REQUEST===============CP 92 13.08.2013 11:53:19 222208 E
93 Prg CL_RSBK_REQUEST_GENERAL=======CP 93 10.09.2011 08:12:31 38912 E
94 Prg SAPLRRSI 94 13.08.2013 12:29:38 393216 E
95 Typ RSD_S_COB_PRO 0 09.09.2011 20:56:49 26624
96 Prg CL_RSR========================CP 96 13.08.2013 12:06:59 180224 E
97 Prg CL_RS_BASE====================CP 97 13.08.2013 12:27:37 15360 E
98 Prg CL_RSD_CHA====================CP 98 13.08.2013 11:55:18 563200 E
99 Prg CL_RSD_IOBJ_VERS==============CP 99 13.08.2013 12:03:26 301056 E
100 Prg SAPLRRMS 100 13.08.2013 12:29:38 49152 E
101 Prg SAPLRRI1 101 13.08.2013 12:29:38 496640 E
102 Typ RSR_S_DEBUGFLAGS 0 13.08.2013 12:01:28 14336
103 Prg CL_RSDDTREX_CORE==============CP 103 13.08.2013 12:29:38 49152 E
104 Prg SAPLRSDI 104 09.09.2011 22:19:14 43008 E
105 Prg SAPLRSDG_IOBJ_DB_READ 105 13.08.2013 12:29:38 355328 E
106 Typ RSD_S_AGGRINFO 0 09.09.2011 20:55:04 2048
107 Typ RSD_S_VIOBJ 0 09.09.2011 20:55:07 30720
108 Prg SAPLRSDN_IOBJ 108 13.08.2013 12:29:38 163840 E
109 Prg CL_RSROA_VQ_SERVICES==========CP 109 13.08.2013 12:29:37 86016 E
110 Prg CL_ABAP_ELEMDESCR=============CP 110 28.05.2009 08:29:24 41984 E
111 Prg CL_ABAP_DATADESCR=============CP 111 28.05.2009 08:29:18 21504 E
112 Prg CL_ABAP_TYPEDESCR=============CP 112 13.08.2013 10:48:27 33792 E
113 Prg CL_ABAP_REFDESCR==============CP 113 13.08.2013 10:48:27 34816 E
114 Prg CL_ABAP_STRUCTDESCR===========CP 114 13.08.2013 10:48:27 49152 E
115 Prg CL_ABAP_COMPLEXDESCR==========CP 115 28.05.2009 08:29:17 19456 E
116 Prg CL_ABAP_TABLEDESCR============CP 116 09.09.2011 21:11:02 37888 E
117 Prg CL_ABAP_CLASSDESCR============CP 117 28.05.2009 08:29:15 34816 E
118 Prg CL_ABAP_OBJECTDESCR===========CP 118 28.05.2009 08:29:28 37888 E
119 Prg CL_ABAP_INTFDESCR=============CP 119 28.05.2009 08:29:25 27648 E
120 Prg CL_ABAP_SOFT_REFERENCE========CP 120 18.11.2005 14:35:28 10240 E
121 Prg CL_ABAP_REFERENCE=============CP 121 07.03.2005 18:01:13 8192 E
122 Prg CL_RSRTS_METADATA=============CP 122 13.08.2013 12:28:25 106496 E
123 Prg CL_RSRTS_METADATA_R3IS========CP 123 13.08.2013 11:55:22 157696 E
124 Prg IF_RSRTS_METADATA=============IP 117 13.08.2013 11:55:54 26624 E
125 Prg %_CABAP 117 28.05.2009 08:14:56 36864 E
126 Prg IF_SERIALIZABLE_OBJECT========IP 117 07.03.2005 18:01:13 5120 E
127 Prg CL_RSROA_VQ_METADATA==========CP 127 13.08.2013 11:55:22 252928 E
128 Prg CL_RSL_ME_METADATA============CP 128 13.08.2013 12:28:21 233472 E
129 Prg IF_RSDRV_TREX_NAME_MAPPER=====IP 117 13.08.2013 12:29:31 8192 E
130 Prg CL_RSDDLTIP_IPROV_TABLE=======CP 130 13.08.2013 11:55:15 147456 E
131 Prg CL_RSAN_PR_ANPR_PROV_TRANSIENTCP 131 13.08.2013 11:55:06 117760 E
132 Prg CL_RSD_DTA====================CP 132 13.08.2013 12:03:25 320512 E
133 Typ LVC_S_ROID 0 19.01.2000 18:31:34 2048
134 Typ RSZCOMPKEY 0 09.09.2011 20:55:16 3072
135 Prg IF_RSO_TLOGO_MAINTAIN=========IP 117 09.09.2011 22:36:34 13312 E
136 Prg IF_RSD_DTA====================IP 117 09.09.2011 22:35:40 30720 E
137 Prg CL_RSRTS_METADATA_ODP=========CP 137 13.08.2013 12:03:31 396288 E
138 Prg IF_RSRTS_TRPR=================IP 117 13.08.2013 12:10:34 10240 E
139 Prg CL_RSR_QPROV_METADATA=========CP 139 13.08.2013 11:55:23 248832 E
140 Typ RSD_S_DTA_PRO 0 09.09.2011 20:55:08 26624
141 Typ RSD_S_IOBJ_OBN 0 09.09.2011 20:56:49 2048
142 Prg CX_RSD_IOBJ_NOT_FOUND=========CP 142 09.09.2011 22:36:07 16384 E
143 Prg CX_RSD_IOBJ_EXCEPTION=========CP 143 09.09.2011 22:36:07 14336 E
144 Prg CX_RS_STATIC_CHECK============CP 144 09.09.2011 22:37:44 19456 E
145 Prg CX_RS_ERROR===================CP 145 09.09.2011 22:37:36 13312 E
146 Prg CX_STATIC_CHECK===============CP 146 18.11.2005 14:35:29 11264 E
147 Prg CX_ROOT=======================CP 147 09.09.2011 21:51:41 13312 E
148 Prg CX_NO_CHECK===================CP 148 18.11.2005 14:35:29 11264 E
149 Typ RSAROUT 0 09.09.2011 20:49:50 4096
150 Typ RSAROUTT 0 09.09.2011 20:50:52 2048
151 Typ RSDVDPA 0 09.09.2011 20:56:49 9216
152 Typ RSDIOBJV 0 09.09.2011 20:54:57 5120
153 Typ RSDKYF 0 09.09.2011 20:46:44 5120
154 Typ RSDVTIM 0 09.09.2011 20:56:49 12288
155 Typ RSDVUNI 0 09.09.2011 20:56:49 9216
156 Typ RSDVCHA 0 09.09.2011 20:55:09 14336
157 Prg CL_RSDRC_NCUM_GEN_TYPES=======CP 157 13.08.2013 12:28:48 9216 E
158 Prg CL_RSD_IOBJ_UTILITIES=========CP 158 09.09.2011 22:25:11 57344 E
159 Prg SAPLRSDN 159 13.08.2013 12:29:38 86016 E
160 Prg SAPLRSVERS 160 13.08.2013 12:29:38 371712 E
161 Typ RSNPAR 0 09.09.2011 20:55:07 3072
162 Prg SAPLSTR4 162 13.08.2013 10:42:32 74752 E
163 Prg %_CTRNSP 162 07.03.2005 18:01:13 10240 E
164Hi Hardeep,
Looks like the transformation and DTP need to be activated again.
The error is RSBK (299) - 'Invalid program status'. So please activate the transformation and DTP possibly activate the DSO's too.
It should then work.
Thanks
Amit -
Load data from one Application to another in BPC NW 7.5
Hi
I have a requirement to load data from One application to another application.
eg. HR Plannning to CostCenter Planning.
I am aware of a method to load data using transformation file mapping source and target dimensions and run DM package and this works fine.
However, the challenge is if i try to automate this process then i will have to hardcode the application tech name and save as variant to use that in process chain. Now, if i hardcode the tech name of the application then it might happen that during full optimization the tech name might change and the automation load will fail.
so how to handle this situation? any standard practices available?
appreciate your inputs/thoughts.
Regards.Hi,
Exactly. The main problem is that there is no statement to transfer the data. Please take a look at the below link from help.sap:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/f4/33f0bbc46c4a53860f1410f20ffb8b/content.htm
Since the structure of both the applications is same, you dont require add_dim or rename_dim, etc. However, you definitely need the when statement.
If you want to transfer all the records, then you can have something like
*WHEN ACCOUNT
*IS *
*REC(EXPRESSION = %VALUE%)
*ENDWHEN
Hope this helps. -
How load data from One Infoobject to Another Infoobject?
Hi GuRUS
Any body has succeded in loading data from One Infoobject to Another Infoobject?
Pls Let me kNow
Regards
DuraiHi Durai,
Create export datasource on the info-object and then load the data to the other info-object.
Check this link also:
Re: How load data from Infoobject to another Infoobject?
Bye
Dinesh -
Loading Data from one Cube into another Cube
Hi Guys,
I am trying to load data from one cube A to another cube B. Cube A has data around 200,000 records. I generate export datasource on Cube A. Replicated the datasource and created InfoSource and activated it.
I created update rules for Cube B selecting Source as Cube A. I do have a start routine to duplicate records in Cube A. Now when I schedule load,
It stops at Processing Datapacket and says no data. Is there something wrong with the update routine or is there any other way to load form cube to cube in a simpler way?
Thanks in advanceThis is the start routine to duplicate records in two currencies.
DATA: datew TYPE /bi0/oidateto,
datew2 TYPE rsgeneral-chavl,
fweek TYPE rsgeneral-chavl,
prodhier TYPE /bi0/oiprod_hier,
market TYPE /bic/oima_seg,
segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
move-corresponding s_data_pack to DATA_PACKAGE.
if DATA_PACKAGE-loc_currcy = 'EUR'.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
DATA_PACKAGE-CURRENCY = 'USD'.
APPEND DATA_PACKAGE.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
DATA_PACKAGE-CURRENCY = 'EUR'.
APPEND DATA_PACKAGE.
else.
DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
DATA_PACKAGE-CURRENCY = 'USD'.
APPEND DATA_PACKAGE.
endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency. -
Loading data from one table to another using cursor
Hi,
I have given the below command to load the data from 1 table to another using cursor.
declare
cursor mycursor IS
SELECT extract_name,from_date,to_date,BETA from temp_table where EXTRACT_NAME='GIFTCARD_DETAILS';
Begin
for mycursor_1 IN mycursor loop
insert into tmp_tab columns(col1,col2,col3,col5) values(mycursor_1.EXTRACT_NAME,mycursor_1.from_date,mycursor_1.to_date,mycursor_1.BETA);
End loop;
commit;
end;
It is working fine.
But I want to hard code some of the columns ( like flags ) which are not there in 1st table and load them into 2nd table.
In db2 we will give commands like
varSqlStatus=`db2 "declare mycurs cursor for select extract_name,from_date,to_date,BETA,'N','Y' from temp_table"`
varSqlStatus=`db2 "load from mycurs of cursor modified by identityignore insert into tmp_tab(col1,col2,col3,col5,col6,col7) nonrecoverable"`
But I want it in oracle 10g, Can any one help me in this.Have you tried either of the two options :
1. Modify the CURSOR itself :
cursor mycursor IS
SELECT extract_name,from_date,to_date,BETA,'N','Y' from temp_table where EXTRACT_NAME='GIFTCARD_DETAILS';2. Modify the INSERT statement itself :
insert into tmp_tab columns(col1,col2,col3,col5,col6,col7) values(mycursor_1.EXTRACT_NAME,mycursor_1.from_date,mycursor_1.to_date,mycursor_1.BETA,'N','Y'); -
How to load data from one Infocube to another request by request using DTP
Hi All,
I have a scenario where we are maintaining backup Infocube B for Infocube A. User loads data from a flat file many times a day in different requests. We need to maintain backup of the Infocube A on weekly basis. i.e data to be refreshed with delta update from cube A to cube B. There are some situations where user deletes some of the requests in Infocube A randomly after use. Will this change effect in back up cube B when performed data refresh from cube A to cube B. i.e. this functionality is similar to reconstruct in BW 3.5. Now we are running on BI 7.0 SP 9.
Can anyone answer this ASAP.
Many Thanks,
RaviYou cannot load request by request, " Get Data By Request " DTP loads request by request on " First In First Out " basis. You can run some Pseudo/Fake DTP's if you dont want to load data from a particular request.
If the user deletes a request from Cube A, it wont be loaded to Cube B but if it is already loaded in Cube B and later the user deletes the request from Cube A you have to delete the request frm Cube B. Inorder to monitor request by request run DTP with " Get Data By Request set. -
Loading data from one table to another table
I need to load the data (data conversion) from one table to 3 different table.
I have to load the data from Source table to following 3 target tables.
So Consumer table has email pk and it has relationship with CONSUMER_RCV table and CONSUMER_RCV
table has relationship with CONSUMER_ATTR table. I am doing right now with pl/sql but I am looking
to use MULTI INSERT or SQL*LOADER or another efficient way.
I tried with MultiInsert but it getting failed as it's violating Unique Constraints as source table might contains
Duplicate emails.
Could you please show me how I can load the data efficiently?
Also I need to load in CONSUMER_ATTR table from CONTACT table which has ATTR1, ATTR2 columns.
so My mapping will be ...
Contact.email, first_name, last_name will go into Consumer table
then in CONSUMER_RCV, I generate the id column value by sequence, load email and DATE_CREATEd from contact table
And rest of the value is hard coded
Then in CONSUMER_ATTR table I will generate the CONSUMER_ATTR_id through sequence, for ID, will use the same
id column value which I have generated by sequence in CONSUMER_RCV, then put the attr_type = 'ATTR1' and for
attr_value column I will insert the value from contact table's ATTR1 value,
Then generate another CONSUMER_ATTR_ID, will use the same id column value which I have generated by sequence
in CONSUMER_RCV, then put the attr_type = 'ATTR2' and for
attr_value column I will insert the value from contact table's ATTR2 value,
Please let me know if you need further explanation.
I am using Oracle 9i R2.
Please consider CONTACT is Source table, CONSUMER is a Target1, CONSUMER_RCV is a Target2 and CONSUMER_ATTR is a Target3
to simplify the problem.
Following is the Table structure
=========================
CREATE TABLE CONTACT (
ID VARCHAR2 (40) NOT NULL, -- will go into Target1
EMAIL VARCHAR2 (100) , -- might be duplicate and will go into Target1 and Target2
FIRST_NAME VARCHAR2 (100) NOT NULL, -- will go into Target1
LAST_NAME VARCHAR2 (100) NOT NULL, -- will go into Target1
COUNTRY VARCHAR2 (40) NOT NULL, -- will go into Target1
PHONE VARCHAR2 (100), -- will go into Target1
NOTIFY VARCHAR2 (3), -- will go into Target2 table's RECEIVE_EMAIL column
CREATE_DATE DATE , -- will go into Target1 and target2
ATTR1 VARCHAR2 (400), -- will go into Target3 as attr_type= ATTR1 and will load actual value in ATTR_VALUE
ATTR2 VARCHAR2(100), -- will go into Target3 as attr_type= ATTR2 and will load actual value in ATTR_VALUE
ATTR2 VARCHAR2(100), -- will go into Target3 as attr_type= ATTR1 and will load actual value in ATTR_VALUE
CONSTRAINT CONTACT_PK
PRIMARY KEY ( USER_ID ) ) ;
CREATE TABLE CONSUMER(
EMAIL VARCHAR2 (100) NOT NULL, -- PK
TITLE VARCHAR2 (40),
FIRST_NAME VARCHAR2 (40),
LAST_NAME VARCHAR2 (40),
ADDRESS1 VARCHAR2 (40),
ADDRESS2 VARCHAR2 (40),
CITY VARCHAR2 (30),
STATE VARCHAR2 (30),
ZIP VARCHAR2 (10),
COUNTRY VARCHAR2 (40),
PHONE VARCHAR2 (15),
DATE_CREATED DATE NOT NULL,
CONSTRAINT CONSUMER_PK
PRIMARY KEY ( EMAIL ) ) ;
CREATE TABLE CONSUMER_RCV (
ID VARCHAR2 (40) NOT NULL,-- PK
EMAIL VARCHAR2 (100) NOT NULL,-- FK reference to Consumer
SITE VARCHAR2 (100) NOT NULL, -- default website
RECEIVE_EMAIL VARCHAR2 (1),
CREATE_DATE DATE NOT NULL,
CONSTRAINT CONSUMER_RCV_PK
PRIMARY KEY (ID) ) ;
ALTER TABLE CONSUMER_RCV ADD CONSTRAINT CONSUMER_RCV_FK
FOREIGN KEY (EMAIL)
REFERENCES CONSUMER (EMAIL) ;
CREATE TABLE CONSUMER_ATTR (
CONSUMER_ATTR_ID VARCHAR2 (40) NOT NULL, -- PK
ID VARCHAR2 (40) NOT NULL, -- FK reference to COnsumer_RCV
ATTR_TYPE VARCHAR2 (100) NOT NULL,
ATTR_VALUE VARCHAR2 (4000) NOT NULL,
CONSTRAINT CONSUMER_ATTR_PK
PRIMARY KEY ( CONSUMER_ATTR_ID ) ) ;
ALTER TABLE CONSUMER_ATTR ADD CONSTRAINT CONSUMER_ATTR_FK
FOREIGN KEY (CONSUMER_ATTR_ID)
REFERENCES CONSUMER_RCV (ID) ;HI Hema,
How are the entries related.. is it like for one entry in y table there are more than one entry in x table then you have to use loop with in loop , here are the both the conditions.
1) For each entry in Y there are more than one entries in X
sort y by quota trpid.
sort x by quota trpid.
loop at y.
loop at x where quota eq y-quota
and trpid eq y-trpid.
z-value = x-value.
append z.
endloop.
endloop.
2) For each y there is one entry in x table.
sort y by quota trpid.
sort x by quota trpid.
loop at y.
read table x with key quota = y-quota
trpid = y-trpid binary search.
if sy-subrc eq 0.
z-value = x-value.
append z.
Endif.
endloop.
Mahesh -
Loading data from one cube to another cube.
Hi,
Trying to copy the data from cube A to cube B...however after creating export data source(8A) on cube A, unable to find the infosource 8A.
Do someone have any idea..... or I'm missing some steps?
Help is highly appreciable.
Regards,
JimHi Amit,
goto transaction sbiw in your BW system. Open 'Business Content DataSources' and select 'activate application component hierarchy'. After that you can additionally choose 'activate business content datasources'. Then goto rsa1->source systems. Right click on your source system (BW itself) and replicate the datasources. After that you should be able to see the application component DM in rsa1->infoSources. In application DM you should see all 8... infoSources and dataSources. If not, you should choose 'Settings->Display generated objects' from the top menu as already suggested.
regards
Siggi -
Load data from one table to another
Hi all,
Please help me for my below requirement.
Oracle version : Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
Rules
1) First two city's should be loaded in city_1 and city_2.
2) If there are more two cities, only first two should be loaded.
3) If only one city_1 has value, it should be loaded in city_1.
drop table seven_cities;
create table seven_cities
(id number,
city_1 varchar2(100),
city_2 varchar2(100),
city_3 varchar2(100),
city_4 varchar2(100),
city_5 varchar2(100),
city_6 varchar2(100),
city_7 varchar2(100)
insert into seven_cities(id,city_1,city_2,city_3,city_4,city_5,city_6,city_7)
values (1,'New York',null,null,null,'Chicago',null,null);
insert into seven_cities(id,city_1,city_2,city_3,city_4,city_5,city_6,city_7)
values (2,null,'Hyderabad','Delhi','Mumbai',null,null,null);
insert into seven_cities(id,city_1,city_2,city_3,city_4,city_5,city_6,city_7)
values (3,null,null,null,null,null,null,'London');
insert into seven_cities(id,city_1,city_2,city_3,city_4,city_5,city_6,city_7)
values (4,null,null,null,'Sydeny','Melbourne','Paris','Berlin');
commit;
select * from seven_cities;
drop table two_cities;
create table two_cities
(id number,
city_1 varchar2(100),
city_2 varchar2(100));
Expected data to be loaded
id city_1 city_2
1 New York Chicago
2 Hyderabad Delhi
3 London null
4 Sydney MelbourneThanks
Raghuselect id,
coalesce(city_1,city_2,city_3,city_4,city_5,city_6,city_7) city_1,
nvl2(
city_1,
coalesce(city_2,city_3,city_4,city_5,city_6,city_7),
nvl2(
city_2,
coalesce(city_3,city_4,city_5,city_6,city_7),
nvl2(
city_3,
coalesce(city_4,city_5,city_6,city_7),
nvl2(
city_4,
coalesce(city_5,city_6,city_7),
nvl2(
city_5,
coalesce(city_6,city_7),
nvl2(
city_6,
city_7,
null
) city_2
from seven_cities
ID CITY_1 CITY_2
1 New York Chicago
2 Hyderabad Delhi
3 London
4 Sydeny Melbourne
SQL> SY. -
How to load data from one Infobject into another in the same system??
Hello All,
i need to load hierarchy data (already existing in 1 Infobject) into another newly created Infobject in the same BW system.Is there a way to do it without involving flat files??
Thanks soo much in advance
Regards,
Priyahi
say there are two infoobjects X and Y.
X is existing infoobject and Y in new one.
go to infosurce-search for X-create export datasource - map the rules and load the data.
This is one way.
Other way is u can use X as a reference object of Y so that both of them have same structure and both objects will share common database tables in BW which are exsting for X.
Hope this helps.
Kindly assign the points if it helps. -
Less number of Records while loading data from one cube to another
Hi,
We are in the process of doing major changes in the existing InfoCube.
Before making any changes, we had planned to make a copy of the cube with data.
For this we did the following steps :
1. Created the new cube from the original cube.
2. Generated Datasource on the Orignal cube.
3. Made a update rule on the new cube by selecting the Orinal cube.
4. Made a InfoPack on Infosouce which got created with 8<original cube>.
5. Uploaded the data into the new cube.
We have uploaded the data successfully from the original cube to the new cube.
However, New cube shows less number of records as compared to the original cube.
But the query is showing the same figures from both the cubes.
Can anyone please advise what could be the reason for this less number of records and how the figures are showing same when we run the query from both the cubes.
Please help.
Thanks
Ramesh GanjiHi Ramesh,
this is possible coz when u have loaded yr original cube, it may be loaded on daily/weekly basis. so in the cube there are many requests. Also if in the same request, if there are two records with same dimension keys ther are automatically added aggregating them.
if req 1 has following records
cust mat amt
1 1 100
1 1 50
it will add
1 1 150
and if the records are seperated by different req, then both will b added individually.
therefore when u r loading yr new cube from original cube, all records that has same dimension key gets aggregated coz they are loaded into single request. so it showing less no of records as added.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN * -
Dtp error when loading data from one cube to another cube?
hi,experts
it seems strange that when I tick the some characteristics as navigational attributes in the cube , the error occurs during the execution of the DTP:error while updating to target Z* (Cube name ).
once i turn the flag off , no error appear. could anyone give me a clue ?
thanks in advance!Hi,
When u make changes in the cube u need to make necessary changes in Transformation and activate the DTP.The checking of Navigational attributes in cube will appear in u r transformation as new fields where u need to create a mapping for them and then activate, also activate your DTP and then load the data. This should resolve your issue.
Regards
Maybe you are looking for
-
Back order line in transact move order form , drived the inventory negative
Hi, I had problem with transacting some lines in several move orders (it was stuck and giving error each time I tried to transact or delete from view update allocation –> delete line) In order to cancel these lines to proceed the manufacturing proces
-
I have just upgraded to 10.8 on my macbook pro and now I can't access itunes, videos and there is no sound - anyone help? It is an old macbook pro probably 6yo with the back lit keys - not under applecare anymore obviously. I downloaded the upgrade l
-
Stop all tabs from loading on startup
I have the "Don't load tabs until selected" selected but all tabs still load. This greatly increases the memory footprint and decreases performance. I have two plugins; Firebug, and Web Development. I've even tried going into about: configuration and
-
Need a way to automatically conference all phone users into a single voice conference.
The old PBX that we are replacing had a way to call every user and place them into one large conference. The customer needs this for emergency siturations but I can not figure out how to do this with CUCM 8.5 and Meetingplace 8.5. I have talked
-
Desktop app + iPhone app syncing
Hello, I have problems with syncing iPhone apps like Remote and 1password with desktop apps (iTunes & 1password). First and foremost – my firewall *allows all incoming connections*. I triple-checked it and it's ok. Second – FileMagnet has no problems