Problem in Loading Lync 2010 Control Panel

After installing Lync Group Chat Server on Lync 2010, The control Panel is not opening. As i have installed the Lync 2010 and Group Chat server on same server due to hardware limitations. In IIS Manager 7.0 i can only run one site at the moment . When in
using MGCWebservice i have stopped Lync internal and External Web Sites and started and MGCWebservice. Now tell the solution how i can run both at the same time coz both using https and Port : 443.
I need to run the control panel and MGCwebservice using IIS Manager 7.0 on same server machine.
Need a solution on urgent basis.

Collocating Microsoft Lync Server 2010, Group Chat with any server role is not supported.
You can change the default port for Lync Server internal and external web service.
You need to change it in Lync Topology Builder and run the step 2 with Lync Server Deployment Wizard, the port will changes automatically
in IIS. But each time you access Simple you need to specify the port you used for Lync web service. You may also have trouble by joining a Lync meeting with Lync client.
i recommend you deploy Lync Server Group Chat server on a seperate server. It is supported in a virtualized environment.
Lisa Zheng
TechNet Community Support

Similar Messages

Problems launching Microsoft Lync Server 2010 Control Panel

Just finished setting a new Lync 2010 environment. I was able to get passed some errors with the Archiving and Monitoring stores. I ended up removing those server roles to get the setup completed. Now, when I try launching the Microsoft
Lync Server 2010 Control Panel I get the following error:
Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly
'System.ServiceModel, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089'
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.TypeLoadException: Could not load type
'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel,
Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
If the Stack Trace is needed I will post, any help would be greatly appreciated in solving this error.
Thanks in advance,
Hector

Were you playing with .NET versions at all?
https://support.microsoft.com/kb/2015129?wa=wsignin1.0
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Lync Server 2010 Control Panel - "navigation to the webpage was canceled"

Hi All,
I just installed Lync Server 2010. The SQL 2008 is installed on a separate box and both servers are on Windows 2008 R2.
However, when I try to start the "Lync Server 2010 Control Panel" i get a blank page with the following message "Navigation to the webpage was canceled"
The Installation had no errors and went well. But I did have one problem in the Topology Builder where is asked to create a File Share and asked for FQDN and File Share. I entered "Server1.domain.com" and File Share "Poolshare" but it did
not like it and error with a red cross saying..
"FQDN Server1.domain.com is already used in this topology"
So in the end I just change it to "Server1" then published and ran the installation sucessfully and all services are started OK
Any idea? could it be that the file share is not using FQDN?
Thanks
ECL

I have reveiwed this topic but have not been able to fing my answer. I am getting the same result when attempting to connect to the Lync Control Panel and the webpage saying "navigation was canceled..". Here are the details, any assistance is greatly
appreciated:
I have an existing OCS 2007 R2 server setup in the domain. My domain is company.CORP. It is a Standard Edition server for IM and Presence only. There is an Edge server as well and I have PIC enabled. My sipinternaltls SRV record to the current SE Front End.
All works great. There is a SIP.company.com record in the domain too. I am standing up LYNC 2010 environment on HyperV and ran topology builder twice because I had to fix a name. (I see in Mac's comment that I need to run step2 again. Why is that?)
My Share is on the HyperV server that is hosting the Front End server but they are completely different servernames. My topology published successfully and create some data in the File Share and the Backend DB was created and populated with tables. The certificates
were successfully applied and all services started right up. The latest version of Silverlight was installed and the server was rebooted. Still the darn White Page with 'Navigation to the webpage was canceled'.
I am able to go into IIS and launch the Control Panel successfully by browsing on the "cscp" directory for the Lync Server Internal Web Site. I can also connect to the Control Panel by using the
httpS://admin.company.com/cscp but I have to put 'cscp ' in the path. I cannot browse AD using the Control Panel to find my TestLyncUser1 account but I can find the account, and successfully enable
the account, using the Lync Management Shell. The account was enables and was able to successfully login to the Lync FE server (manually, since the SRV record point to OCS).
This is where I am stuck. Why won't it launch from the Programs File Tool and why do I have to designate the CSCP in the URL? I am Not sure why I couldn't browse AD successfully in the Control Panel yet I could with Powershell. I will begin troubleshooting
that issue next. Could it be because my sip.company.com record points to a different OCS Pool? Or my SRV internaltls record points to the OCS Pool? Microsoft supports standing up the two environments side-by-side and migrating but maybe I am missing something.
Any ideas anyone?
I want to add that I will be having a FE Pool and have named and published my second FE but I have not installed it. The Pool VIP is created in DNS and only pointing to FE1 right now.

LYNC 2013 control panel error: this page cannot be displayed

Dear sir,
Now i am suffering with the lync 2013 control panel problem, i cannot open it and got the error "This page can't be displayed" as below screenshot shows,
I've tried some ways, but still same problem
1. Reflush the dns, checked the A record and SRV record of the FE are normally.
2. checked the IIS and also cannot find any problem.
3, reboot the FE server/IIS, and AD.
4. i can open the console page normally via web :https://localhost/cscp
5. i can ping the FE server domain name and return the right IP info.

Hi TECH-Tommy,
The certificate is under “Personal” store.
In addition, can you open the page via
https://admin.domain.com ?
Also please try to clear IE cache and treat the FQDNs for admin, pool or FE server name as trusted zone.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Lync Server 2010 control panel - Server Error in '/cscp' Application

Hi everyone,
Recently i have installed Lync 2010 with no problem at all. But when i try to open de control panel it sends me this error:
Server Error in '/cscp' Application.
Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) +0
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) +153
   System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +63
   System.Web.Compilation.BuildManager.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +124
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +76
[ConfigurationErrorsException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +12406256
   System.Web.Configuration.Common.ModulesEntry.SecureGetType(String typeName, String propertyName, ConfigurationElement configElement) +69
   System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) +62
   System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) +299
   System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) +1262
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +133
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +304
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +404
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +475
[HttpException (0x80004005): Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12599232
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12438981
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.33440
Anyone has any idea what is going on?

To fix your issue, you can refer below link
http://social.technet.microsoft.com/Forums/lync/en-US/14948578-dfaa-4d32-b29d-42ecf576afeb/lync-control-panel-errors
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Navigation to webpage was canceled when opening Microsoft Lync Server 2010 Control Panel

Ok, yes I know there are many threads with similar titles, but my problem is different in that it doesn't happen every time.
The first time I access the Control Panel I get the error:
"Navigation to the webpage was canceled
What you can try:
Refresh the Page"
Clicking Refresh the Page works, kind of. It brings up the admin console, but I get the spinning lights, which eventually resolves to an error at the top of the page that reads: "An operation failed. Network communication failed. Verify
your connection and try again."
Then if I click to other parts, things seem to be fine for the most part, I sometimes see the Network error, and often it is slow.
Port 443 is running through an HLB and this is setup exactly like my other Lync cluster, which doesn't have this issue. Internal web services URL is lynccontent and points to HLB VIP. Admin redirect is lyncadmin and points to HLB VIP.
Going to the /cscp page of each FE or of the pool from IE works every time, but lyncadmin seems to have the same issue (at least on FE1).
Any thoughts?

Hi,
Could you perform the followings:
Make sure there're no duplicate records in the DNS Servers
Flush your DNS Cache at the Server & Client
Refresh any DNS Cache at the HLB (if any)
When the error appears, right click on the console and provide a screenshot on this
If you suspect that FE1 is the culprit, had you tried turning it off and monitor the situation?
Thanks!
James Ooi MCITP Lync Server 2010 | Blog: http://jamesosw.wordpress.com | Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread

Lync server 2010 control panel SoapException error

We had a multi-site installation of Lync 2010 up (2 FE servers, 2 back-end SQL servers, 1 director, 1 Group Chat) and running when suddenly (and no one has any explanation of what happened, of course) no one can logon the Control Panel. Those in the
CsAdministrator group are flat out denied (not an RBAC denial) and new users added to the group received a SoapException (CS2001, CS2008) and a long, drawn-out explanation of why it failed:
An operation failed. System.Web.Services.Protocols.SoapException: Server was not able to process request. System.InvalidOperationException: Unable to generate a temporary class (result=1) Error CS2001: source file "c:\windows\temp\xxxx.cs"
could not be found error CS2008: no inputs specified
At the same time, the Group Expansion is also no longer working and the Group Chat Lookup Service refuses to stay running (although I'm not sure this ever worked, given the other issues)... I did find some blogs/articles that mention something
about the permissions on the C:\windows\temp folder for other products (FIM, Visual Studio) but not for Lync. The installation is still in beta testing, so a complete re-do isn't beyond the scope of the install... just something I would rather avoid
if possible.
Suggestion? ideas? questions??
Thanks for the pointers...
Mike

Hi,
Thank you for sharing the information. It is useful for others who may encounter similar issues. You time and effort are appreciated.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Cannot start Lync Server Control Panel

Hello All,
my lab is as follow:
1 virtual machine W2K8 x86 acting as domani controller
1 virtual machine W2K8 X64 acting as Front End and SQL server (co-located)
Installation runs smoothly I get to the end no red marks no problem.
It's an Enterprise pool with all the relevant A host created for admin sip meet dialin (poolname and hostname of the collocated machine)
_tlsinternal created. The user I tried to gain access to Lync Control Panel with is a member of all CS* security group and RTC*security group.
https://FQDN are in the trusted site of IE and I'm not using proxy in my IE.
I even enabled a couple of accounts via Power Shell and they are able to connect to the lab system (a good sign that everything is up and running)
BUT
I CANNOT ACCESS THE LYNC CONTROL PANEL
Unauthorized: Authorization failed.
The application cannot verify your credentials.
Verify your logon credentials and contact your support team
HEEEEEEEEEEEEEEEEEEELP
Thanks in advance
PS
Same story if I try to access https://admin.FQDN
giuseppe

Hi,
As you stated that you have done with the permissions of CSAdministrator group than I will suggest you that kindly check the event viewer and work on error or even post the event error here because I dont think so that you should not connect with Lync after
successful installation.
For assistance check the steps for installation here please.
Lync Server 2010 Installation step
by step
Regards.
Shafaquat Ali.
M.C.I.T.P Exchange 2007/2010, M.C.I.T.P Windows Server 2008, M.C.T.S OCS Server 2007 R2, URL: http://blog.WhatDoUC.net Phone: +923008210320

Lync Server Control Panel : Insufficient access rights to perform the operation;

Hi team,
I have a strange problem in managing Lync users through control panel. But I can enable/disable and Manage users through power shell. Am getting an error " Insufficient Rights to perform the operations" when i try through control panel
Please can someone help me urgently on tihs. I have all the users in a separate OU from where the RTC and CS groups are available. Is there any issue with the delegation?

Hi,
You will receive this error message when you attempt to manage Lync users who are members of protected admin groups in Active Directory (such as Enterprise Administrators etc.).
Typically I use Lync Management Shell, so don't get this error often as it only occurs in the Control Panel.
Editing the properties of the user object you are attempting to enable / disable in AD, and enabling inheritance on under the security tabs advanced options will also work around the problem, but you may not wish to do this. The inheritance change will revert
itself in 15 minutes or so I believe.
Perhaps someone can advise of an alternate solution through group membership / permissions, but as I don't have the issue often I've not looked into it at any great depth.
Kind regards
Ben
Blog:www.gecko-studio.co.uk/
Twitter:
LinkedIn:
Facebook:
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems
or queries.

Not allowed to move load order of Control panels in System Preferences Tige

I post here because System refuses to let me post in Tiger forum depite my being a forum member since purchasing my G4-500 new just a few months after coming out.
The problem is associated with my PowerBook17" bought new March a year ago. I currently am running 10.4.6 Tiger.
On my G4-500 using Panther 3.9 I am allowed to drag and drop the load order of extension and control panel in System > Accounts > Startup items, at will.
If I try the same thing on my PowerBook 17" It want let me Drag or if I do get it appear to drag what it does instead is remove from the list.
Suggestions?

How do I mark one portion of my question as being answered ( the part so named in the subject line.) and one part as not part about not being able to get into sub category so far as adding a question.
You can use the Helpful buttons without using Solved. Solved will result in your thread being marked as answered, Helpful won't. It is possible to mark a question answered without marking any posts as helpful or solved. You would do this if you found the solution somewhere other that the thread with the question. It is good form to post what the solution is so that others can benefit. You can go back & "unmark" a question as answered, but I'm not sure if there is a time limit from the time you originally marked it answered.

Bit Locker encription Problem not showing in my control panel

i am using windows 7 64 home premium
in my control panel
Bit
Locker encription driver is not showing
please guide me how i will about how this driver will show in my control panel

BitLocker is not available in Windows 7 Home Premium, you need to be running Windows 7 Enterprise or Ultimate to be able to use BitLocker.
Blogging about Windows for IT pros at
www.theexperienceblog.com

Lync Control Panel Issue

On all my front end servers (3) lync control panel will not open also I cannot access https://lync.example.xyz/cscp on any of the front end servers. https://localhost/cscp opens fine on the servers though. But on any other machine on
that domain I can go to https://lync.example.xyz/cscp and it opens up no problem. Its just on those front end servers I cannot open the webpage or control panel. Any idea?
Rich

Hi,Rich
Here are some suggestions:
1)Please make sure you didn't type wrong FQDN for the pool name on FE server by mistake
2)Please try to add https://lync.example.xyz/cscp to your Trust sites zone on your FE server.
3)Please verify that if your IE proxy is set or "Automatically detected settings" is set in the internet options,if so please set exclusions to bypass reverse proxy server for
https://lync.example.xyz or turn off it.
4)Please disable IPv6 on FE server and try again to see if it works
5)Here are some other information related,hope these can give you some tips.
http://blogs.technet.com/b/ucedsg/archive/2010/11/15/new-f5-load-balancer-deployment-guide-available-for-lync-server-2010.aspx
http://www.lync-blog.nl/?p=588&lang=en
http://jamesosw.wordpress.com/2012/05/08/lync-server-control-panel-navigation-to-the-webpage-was-cancelled/
http://terenceluk.blogspot.com/2011/01/navigation-to-webpage-was-canceled.html
B/R
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Cant access lync control panel

i have troubles opening the lync server control panel, when i login using my administrator i get "navigation to the webpage was canceled".
to get the obvious out of the way:
- DNS record for admin already added, pointing at lync FE server
- The user, used for loggin in is member of CSAdministrator
- I am able to ping between the Lync FE and and AD
- IIS https setup, ip:all unassigned port 443,is set to use the lync FE certificate
if any further information is needed please tell me

Hi,
Did you change the simple URL to access Lync server Control Panel? If yes, please make sure you also change for DNS record and certificate. You can run the Enable-CsComputer on each Front End server to register the change.
Please also make sure W3SVC work normally.
You can refer to the link below of “Troubleshooting Lync Server 2013 Control Panel”:
http://technet.microsoft.com/en-us/library/gg195689.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
you mean the one i set in the lync topology manager? called admin.domain.local ? if so, then no it isnt changed

Problem loading variables and controls in Workshop 8.1 (Beta) Palettes

Hi All,
I am getting problem in loading variables and control in the Workshop Data and
Control Palette at times when I open the application. The Workshop interface shows
the variable at times and does not show up at all on another instance. Let me
know if anybody else has faced a similar problem or not

Akshay,
Please post this question in the Workshop 8.1 Beta Newsgroup.
weblogic.developer.interest.81beta.workshop
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Akshay Aggarwal" <[email protected]> wrote in message
news:3e9107da$[email protected]..
>
Hi All,
I am getting problem in loading variables and control in the Workshop Dataand
Control Palette at times when I open the application. The Workshopinterface shows
the variable at times and does not show up at all on another instance. Letme
know if anybody else has faced a similar problem or not

Problems: iCloud Control Panel 2.1.1 not allowing sync of contacts, calendar, remainders and notes

I just installed Outlook 2013 today. Initally it was showing contacts calendars from my iCloud. Then i got a message that I could not have two outlooks on the computer and I needed to remove one of them. I did take off outlook 2007. Now the control panel does not give me an option to sync with outlook at all. It just tells me that mail contacts calendars reminders and notes are avilable at icloud.com.
I hope to be able to get control panel and outlook to talk nicely again soon.
any help would be greatly appreciated.

I have a similar issue. I installed Office 2013 yesterday. iCloud 2.1.1.3 I thought was working - I could see the Add-On in Outlook and my contacts were showing correctly under people but it showed in the iCloud control panel that my email for icloud was not connected. I tried removing my iCloud account from Outlook with the intent to reconnect it via the iCloud Control Panel. Bad idea apparently--anytime I try loading the iCloud Control Panel it crashes office. I have reintalled the control panel, tried the office repair, tried enabling / disabling the add-ons, tired a seperate test Outlook profile--nothing works- I am no longer able to integrate the icloud features into Outlook.
I am using Win 7 x64 SP1 with Office 2013 x32. iCloud Control Panel 2.1.1.3
Update: I tried rolling back to a restore point from yesterday to at least get my contacts functioning again. No Luck- the accounts are there again but they are not connected and can't be opened. iCloud Control Panel still crashes Office/Outlook as seen above anytime I try to open it

Problem in Loading Lync 2010 Control Panel

Similar Messages

Maybe you are looking for