Problem in loading ods

hi,
when iam loading my data into ods iam getting this problem,
up to the final step there is no problem, iam getting green color signal in each and every step in request processing which we could see in the DATA PROCESSOR MONITOR SCREEN and when we go for the next step that is activating the ods so that we could get that ods in reporting level there only iam getting the RED color request, i have tried to solve the problem but no use, our basis team again installed the software also then also no use,
I WANT TO KNOW HOW TO SOLVE THIS PROBLEM , IS THERE ANY PROBLEM WITH THE WORK BENCH ITSELF
pls suggest me and help to solve this problem

Hi Sriramakrishnan,
I think some one already suggested you to delete all existing RED (failed) requests and then relaod and activate your ODS.
Activation cannot happen if there are existing RED requests.
To delete RED requests:
Right click on the ODS--> Manage --> Requests.
Hope this helps
Assign points if helps !!
Regards,
Naveeen Rao Kattela

Similar Messages

Problem in loading transactional data from to 0MKT_DSO1(ods) to 0MKTG_C01

Hi,
I am trying to load lead transaction data to the standard Crm lead management cube from ODS.There is a problem while loading transaction data from 0MKT_DSO1(ods) to the infocube 0MKTG_C01 as the field 0STATECSYS2(CRM STATUS) is set to 10 in ods -meaning incorrect transaction. This feild is not there in the infocube.
There is a routine in the cube that deletes data records with (0statecsys2) set to 10.
THIS field is not coming in the transaction.
so, where can i see the master data in crm source system? and why is that feild getting set to 10 ?
thanks in advance!

Thanks for the reply..
I have checked the Fact table which shows
1. packet Dimension
2. Time dimension
3. Unit dimension.
I have kept the 0CALDAY as the time characteristics.
Sample data i have loaded from ODS to Cube.
Sample data in ODS.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
I have loaded this data in Cube with Full Upload.
Data in Cube.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
Again i am loading the same data to cube
Data in cube after loading.
Sales order No_____0CALDAY_____AMOUNT
800001___________12/02/2009____15
800001___________12/02/2009____15
The data is duplicated and it is not cumulating.
Am i missing anything on this.
Pls help..
Thanks,
Siva.

Problem while loading data from ODS to infoobject

Hi guys,
I am facing problem while loading data from ODS to infoobject.
If I load data via PSA it works fine but
if I load data without PSA its giving error as Duplicate records.
Do u have any idea why it is so.
Thanks in advance
savio

Hi,
when you load the data via the PSA, what did you select? Serial or Paralel?
If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
hope this helps...
Olivier.

Problem when loading from ODS to the CUBE

Hi Experts,
I am facing an unusual problem when loading data from ODS to the cube.
I have a first level ODS where the delta postings are updated. I have checked the active table of the ODS and the data is accurate.
I have deleted the entire data from the Cube and trying to do a full load from ODS to the CUBE.
I am sure when I run a full load the data goes from Active table of the ODS.
After the full load the the keyfigure values are 0. I have tried doing the testing by loading couple of sales documents and still the keyfigure values are 0.
I wonder when I load the full. The data should be picked exactly the way it is in active table of the ODS.
I also dont have any fancy routines in the update rules.
Please help me in this regard.
Regards
Raghu

Hi,
Check the procedure did u do that exactly or not. just follow the the laymen steps here:... and let me know ur issue
o     First prepare a flat file in Microsoft excel sheet for master data and transaction data and save it in .CSV format and close it.
o     First select info objects option and create info area then create info object catalog then char, & key figure. Then create id in Char, Name as attribute activate it then in key figures create no and activate it.
o     In info sources create application component then create info source with direct update for master data and flexible update for transaction data. The flat files would be created for master data create info package and execute it.
o     For transaction data go to info provider then select the file right click on it then select option create ODS object. Then a new screen opens give the name of the ODS and create other screen opens then drag character to key fields.
o     Activate it then update rules it will give error to it then go to communication structure and give 0Record mode then activate it then go to update rules it will activate it.
o     Then go to info source then create info package then external data then processing update, Data targets then the scheduling then click start then the monitor.
o     Then other screen opens there we can see if we doesnt able to see the records then come back to the info provider right click on it then other screen opens then select the option activate data in ODS then a screen opens.
o     so select the option QM where it would be in a yellow co lour then by double click then another screen opens then select green color option then click continue it and it comes to the previous screen then select the option and click save it would be underneath of it just click it up and close it.
o     Then come back to the main screen to the info source to the info package go to the package and right click on it then a screen opens then click schedule without distributing any of the tab directly click the monitor tab. Then refresh it until the records come to the green.
o     Once it is green the click the data target and see the file executed.
o     Now go to the info provider then a right click on the file name then create info cube. Then a new screen opens and gives the name and activates it. The drag the key figures to the other side, time characteristics to the other side, and chacetristics to the other side.
o     Then create the dimension table then assign it and activate it .Then go to file name right click on it then select the option create update rules select ODS option and give the file name and activate it .
o     Then come back to the main screen and refresh it. Whenever you see 8 file names you will know that it is undergoing the data mart concept.
o     In the main screen click ODS file right click then a pop up screen opens select the option update ODS data target. Then another screen opens in that we are able to see 2 options full update, initial update then select initial update.
o     Then another screen opens info Package there the external data , data targets , scheduler select the option later in background option then a another screen opens just click immediate then click save automatically it closes then click start option.
o     Then select monitor option then the contents then the field to be elected then the file to be executed.
regards
ashwin

Delta Update Problem when loading to Cube

Dear all.
Scenario:
DataSources 2LIS_18_NOTIF and 2LIS_18_I0TASK are extracted to ODS Daily which is a Delta Update.Weekly once they are updated to cube which is also Delta Update.This is automated by a process chain.
DataSource 2LIS_18_NOTIF failed on 27.07.2005 which we did not notice.Datasource 2LIS_18_IOTASK is fine.I did a repeat delta for 2LIS_18_NOTIF which is successful.Data upto ODS is fine.
Now the problem is loading data from ODS to cube which is Delta Update to be loaded every week.There are some Update rules written in which sy-datum is used.
Proposed Solution:
Change sy-datum for every monday date and do the delta update for 7 2LIS_18_I0TASK requests and 1 2LIS_18_NOTIF request.Delete the request from Cube,to remove delta management for 2LIS_18_NOTIF request.Now load for second week with 7 2LIS_18_I0TASK requests and the same 2LIS_18_NOTIF.Do this for all weeks and finally reconstruct all the requests which are deleted from cube.
if i follow the above approach can there be any Data inconsistency?
please help me to resolve this issue.
Regards
Ravi.

Hi Ravi,
If you are going to make a code change, which it looks like you are going to do, then I would suggest the following:
- Create an InfoObject called ZMondayd. Define is a type date, and allow master data.
- Input in the date you want your update rules to use
- In the update rule, change the code to read the value from the InfoObject, not sy-datum.
- Load your data.
I would also set up a process to update the InfoObject on a weekly basis to hold the date that you want. By using this method, if for some reason or another this process fails, you do not have to make any code changes, just maintain the InfoObject with the correct date, and reload the data.
Cheers! Bill

Problem in loading animated gif

I have problem in loading animated gif with ClassLoader. Here is the code:
ClassLoader loader=this.getClass().getClassLoader();
URL res = loader.getResource(name);
if (res!=null) {
ImageIcon icon = new ImageIcon(res);
if (icon != null) {
Image image = icon.getImage();
if(icon.getImageLoadStatus() == MediaTracker.COMPLETE)
images.put(name,image);
return (Image) image;
} else {
System.out.println("Failed to load "+name+" error "+icon.getImageLoadStatus());
images.put(name,"");
Only when the gif is an animated gif, I get error message: Failed to load and icon.getImageLoadStatus() returns 2. Otherwise, it works.
Anyone encounters the same problem as me?

I think the problem is the asynchronous loading of the gif.
when you call f(icon.getImageLoadStatus() == MediaTracker.COMPLETE)
I think it is comming back MediaTracker.LOADING .
for an animated gif, it may not come back COMPLETE until after running thru
the whole automation. instead you could just check:
(icon.getImageLoadStatus() != MediaTracker.ERRORED)

Bank statement: problem to load variable length field

we have many bank accounts with different banks, and we would like to use the bank reconciliation module to do bank reconciliation.
we have problem in load the MT940 bank statement. All these banks are providing so called standard SWIFT940 format, which not able to give fixed length field.
we have problem on line 61 which have a lot of variable length fields.
line 61 comprise of 7 fields, which are:
A) Value date - fixed 6 chars.
B) Entry date - fixed 4 chars.
C) Credit/debit - variable 1-2 chars.
D) Fund Code - fixed 1 char
E) Transaction amount - variable 15 chars
F) Transaction code/type - fixed 4 chars
G) MID, cheque#, BIS - variable 16 chars
How can we write the SQL Loader script if there is no delimiter, and the start position of the fields are not fixed?
we can load A and B easily, but C onwards we will have problems.
please help.
INTO TABLE ce_stmt_int_tmp
WHEN rec_id_no = '61'
TRAILING NULLCOLS
(rec_no RECNUM,
rec_id_no POSITION(1:2) CHAR,
column1 POSITION(4:9) CHAR,
column2 POSITION(10:13) CHAR,
column3 ??
column4 ??
column5 ??
column6 ??
column7 ??
------

Hi Linda,
As said by gupta, please check, whether the bank statement has the statement 62F:
If not, please get the statement again from bank and ensure that the end statement 62F exists in the statement..
This will help you to overcome your problem..
Regards,
Praisty

Problem in Loading Multiple image in Single Sprite/MovieClip

Hi All,
I am having a killing problem in loading multiple images in single movie clip/sprite using a separate class.
Here is the ImageLoader.as class
package com.project.utils{
 import com.project.*;
 import com.project.utils.*;
 import flash.events.EventDispatcher;
 import flash.display.MovieClip;
 import flash.events.Event;
 import flash.events.ProgressEvent;
 import flash.display.Loader;
 import flash.events.IOErrorEvent;
 import flash.net.URLLoader;
 import flash.events.MouseEvent;
 import flash.net.URLRequest;
 import flash.display.Bitmap;
 public class ImageLoader extends EventDispatcher {
 public var imgloader:Loader;
 public var imgMc:MovieClip;
 public var imgObject:Object;
 public var loaded:Number;
 public function ImageLoader():void {
 imgMc = new MovieClip();
 imgObject = new Object();
 imgloader = new Loader();
 public function loadImage(imgHolder:MovieClip, imgObj:Object):void {
 imgMc = new MovieClip();
 imgObject = new Object();
 imgloader = new Loader();
 imgMc = imgHolder;
 imgObject = imgObj;
 imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
 imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadProgress);
 imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadFailed);
 imgloader.load(new URLRequest(imgObj.FilePath));
 private function onImgLoad(Evt:Event):void {
 var image:Bitmap = Bitmap(Evt.target.content);
 try {
 imgMc.removeChildAt(0);
 } catch (error:Error) {
 imgMc.addChild(image);
 try {
 if (imgObject.URL != undefined) {
 imgMc.buttonMode = true;
 imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
 imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
 } catch (err:Error) {
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
 private function onImageClicked(evt:MouseEvent):void {
 trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
 private function onImgLoadProgress(Evt:ProgressEvent):void {
 if (Evt.bytesLoaded>0) {
 loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
 private function onImageLoadFailed(Evt:IOErrorEvent):void {
 trace("Image Loading Failed");
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
 for (var i=0; i < 3; i++) {
 //imgLoader=new ImageLoader;
 imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
 var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
 target.list_mc.visible=false;
 var imgObj:Object=new Object;
 imgObj.FilePath=list[i].Thumbnail;
 imgObj.Url=list[i].Url;
 imgObj.Target=list[i].Target;
 target.list_mc.urlObj=new Object ;
 target.list_mc.urlObj=imgObj;
 imgLoader.loadImage(target.list_mc.imgholder_mc,imgObj);
 target.list_mc.lable_txt.htmlText="" + list[i].Label + "";
 target.list_mc.imgholder_mc.buttonMode=true;
 target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
 mcCount++;
In this case, the ImageLoader.as works only on the last movie clip from the for loop. For example, if i am trying to load three image in three movie clips namely img_mc1,img_mc2 and img_mc3 using the for loop and ImageLoader.as, I am getting the image loaded in the third movie clip only img_mc.
See at the same time, If i uncomment onething in the for loop that is
//imgLoader=new ImageLoader;
its working like a charm. But I know creating class objects in a for loop is not a good idea and also its causes some other problems in my application.
So, help to get rid out of this problem.
Thanks
-Varun

package com.project.utils{
 import com.project.*;
 import com.project.utils.*;
 import flash.events.EventDispatcher;
 import flash.display.MovieClip;
 import flash.events.Event;
 import flash.events.ProgressEvent;
 import flash.display.Loader;
 import flash.events.IOErrorEvent;
 import flash.net.URLLoader;
 import flash.events.MouseEvent;
 import flash.net.URLRequest;
 import flash.display.Bitmap;
 public class ImageLoader extends EventDispatcher {
 public var imgloader:Loader;
 public var imgMc:MovieClip;
 public var imgObject:Object;
 public var loaded:Number;
 public function ImageLoader():void {
// better add you movieclip to the stage if you want to view anything added to it.
 imgMc = new MovieClip();
 imgObject = new Object();
 imgloader = new Loader();
 public function loadImage(filepath:String):void {
 imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
 imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadPr ogress);
 imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadF ailed);
 imgloader.load(new URLRequest(filepath));
 private function onImgLoad(Evt:Event):void {
 var image:Bitmap = Bitmap(Evt.target.content);
 try {
 imgMc.removeChildAt(0);
 } catch (error:Error) {
 imgMc.addChild(image);
 try {
 if (imgObject.URL != undefined) {
 imgMc.buttonMode = true;
 imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
 imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
 } catch (err:Error) {
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
 private function onImageClicked(evt:MouseEvent):void {
 trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
 private function onImgLoadProgress(Evt:ProgressEvent):void {
 if (Evt.bytesLoaded>0) {
 loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
 private function onImageLoadFailed(Evt:IOErrorEvent):void {
 trace("Image Loading Failed");
 dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
 for (var i=0; i < 3; i++) {
 var imgLoader:ImageLoader=new ImageLoader();
 imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
 var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
 target.list_mc.visible=false;
 var imgObj:Object=new Object;
 imgObj.FilePath=list[i].Thumbnail;
 imgObj.Url=list[i].Url;
 imgObj.Target=list[i].Target;
 target.list_mc.urlObj=new Object ;
 target.list_mc.urlObj=imgObj;
 imgLoader.loadImage(pass the image file's path/name);
 target.list_mc.lable_txt.htmlText="" + list[i].Label + "";
 target.list_mc.imgholder_mc.buttonMode=true;
 target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
 mcCount++;

HT1926 having problem up loading Itunes, comes up that 'Apple mobile Device failed to start. Verify that you have sufficient privileges to start system services' how do i fix this??

I am having problems up loading Itunes, comes up that 'Apple mobile Device failed to start. Verify that you have sufficient privileges to start system services' how do i fix this??

Hello hurleygirl63,
Thank you for the details of the issue you are experiencing with iTunes. I recommend following the steps in the article below:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problem in loading data to DSO

Hi,
I have a problem in loading the data to DSO through Info package. The delta request has been running for a long time, but no data has been loaded. The job details screen is showing as below.
Previously there was no issues with this chain.
Can some one guide me to solve this issue please.?
Regards
Ragu

Hi Ragu,
The same issue has been happened for me long time back. I have solved this issue by running the Repair Full request and then Init. delta without Data Transfer.
May be this may also work for you.
Steps:
1.Delete the request by marking it as RED
2.Run Info package Repair full Request.
Once this is success,
3.Change Info package and Run Init delta without data transfer
4. If it pop ups Init Delta already exists,then delete the previous init from the source.
after the init delta is ended fine, then change your Info package to Delta as it is before.
Hope it helps.
regards
Deva

Loading through Process Chains 2 Delta Loads and 1 Full Load (ODS to Cube).

Dear All,
I am loading through Process chains with 2 Delta Loads and 1 Full load from ODS to Cube in 3.5. Am in the development process.
My loading process is:
Start - 2 Delta Loads - 1 Full Load - ODS Activation - Delete Index - Further Update - Delete overlapping requests from infocube - Creating Index.
My question is:
When am loading for the first am getting some data and for the next load i should get as Zero as there is no data for the next load but am getting same no of records for the next load. May be it is taking data from full upload, i guess. Please, guide me.
Krishna.

Hi,
The reason you are getting the same no. of records is as you said (Full load), after running the delta you got all the changed records but after those two delta's again you have a full load step which will pick whole of the data all over again.
The reason you are getting same no. of records is:
1> You are running the chain for the first time.
2> You ran this delta ip's for the first time, as such while initializing these deltas you might have choosen "Initialization without data transfer", as such now when you ran these deltas for the first time they picked whole of the data.Running a full load after that will also pick the same no. of records too.
If the two delats you are talking are one after another then is say u got the data because of some changes, since you are loading for a single ods to a cube both your delta and full will pick same "For the first time " during data marting, for they have the same data source(ODS).
Hope fully this will serve your purpose and will be expedite.
Thax & Regards
Vaibhave Sharma
Edited by: Vaibhave Sharma on Sep 3, 2008 10:28 PM

Problem in loading Ntriple to Oracle

Hello,
Can some one please point what could be wrong in loading of Data in Ntriple format using the Code provide by Oracle to convert RDF data in N-Triple format to
Oracle's RDF storage type, SDO_RDF_TRIPLE_S in Oracle10g R2.
called TestNTriple2NDM.java
C:\prateek\semdis\sdordf_converter>java TestNTriple2NDM Data/timestamp.nt TIMEST
AMP_RDF_DATA TIMEMODEL 3
ID: 1403 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 322
ID: 3641 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 322
ID: 5835 Error: java.sql.SQLException: Unsupported feature
Rows: 10000
ID: 10754 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 322
ID: 10755 Error: java.sql.SQLException: ORA-13199: RDF:Error occurred
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_TRIPLE_S", line 322
ID: 10868 Error: java.sql.SQLException: Unsupported feature
ID: 12002 Error: java.sql.SQLException: Unsupported feature
ID: 12818 Error: java.sql.SQLException: Unsupported feature
time (sec): 2342.0
time (min): 39.03333333333333
It loads the data,but I see all these errors.
Thanks
Prateek

Hi Prateek,
I have posted a response at Problem in loading Ntriple to Oracle .
Melli

Problem in Loading a report

Hi there,
We have a problem on loading a report.
For some users, when they try to load the report the system prompts for username/ password.
This is a Web application system, where we use Windows authentication and impersonate=true.
I suppose that this problem might occur since users do not have access to C\Windows\Temp.
Thought for security reasons we do not want to give access to the users in this directory, and we do not want to change the temporary directory of windows ( from changing Temp Environment Variable)
We have also try thr bellow solution with no results:
"To change the CR temp folder, in registry, set the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Crystal Decisions
Report Application Server\InProcServer\TempDir "
Is tehre any way to change the default loading path for reports from C:\Windows\Temp to somthing else?
Thanks for your help.

Hello Maria,
the reg key you are describing is for inproc RAS. In my opinion this has only limited importance for your problem as you more likely have a user authentication issue.
Please try to narrow down the problem that 'some user can / others can't log in'.
What is the difference between these users ? Please check the database settings / possible roles for these accounts.
Please also see if these user can access the reports in the designer or if they get the same database issue. Is it just one report / a group of reports or all reports where you face that issue ?
Thanks a lot
Falk

Problem in Loading Material Hierarchy

Hi,
I am having problem while loading material hierarchy from R/3. Whenever i execute infopackage for infosource 0MATERIAL, I am getting following error msg.
The node name for ID 00005983 contains invalid characters
Diagnosis :
Node name DVD77ELR-D2 with node ID 00007774 contains lower case
letters or characters that are not permitted.
System response:
Processing was terminated
Procedure:
Change the node name so that it only contains permitted characters.
Procedure for System Administration
As a result the Request is in RED state.
Please suggest any solution ASAP.
Regards
Prasad
Note: Ponits will be awarded for fast and correct response.

Hi...
Thank you all for reply.
I have solved the problem. But this was not related to RSKC.
This was due to a material code DVD77ELR-D2 which was not created correctly. I have removed the hierarchy assigned to this material and marked it for deletion.
Now the hierarchy has been loaded perferctly.
Regards
Prasad

Problem in loading Rex

I hv problems in loading my rex file(SQL*ReportWriter5
101147). The rex on loading says
"SRW-1806: Abnormal condition: Internal error while reading from
loadfile." Unable to trace the error. The rex seems to be
normal. I am in the process of migration. Pls. help me out.

I think the problem is the asynchronous loading of the gif.
when you call f(icon.getImageLoadStatus() == MediaTracker.COMPLETE)
I think it is comming back MediaTracker.LOADING .
for an animated gif, it may not come back COMPLETE until after running thru
the whole automation. instead you could just check:
(icon.getImageLoadStatus() != MediaTracker.ERRORED)

Problem in loading ods

Similar Messages

Maybe you are looking for