Problem in loggin to my Z60M...

I passed my Z60M to my family to use with my password to them.
Later week, it failed to login with the right password.
Prompting ... "Wrong domain"
Pls help 

I passed my Z60M to my family to use with my password to them.
Later week, it failed to login with the right password.
Prompting ... "Wrong domain"
Pls help 

Similar Messages

  • Problem when loggin in abroad

    Hello
    I need to be able to access my account online both from the US and abroad (Italy mainly).
    Currently when I try to access my account online abroad I keep getting an error message after I input my userid. I am never able to reach the page that asks for my password as, after I neter my userid, a page opens up saying  "the information you entered does not match our records". On the contrary, I am able to log in without any problem from the US doing the exact same process.
    When abroad, I tried using different browsers on the same laptops, and also different computers. I still got the same error notification.
    Can you provide some clarifications? what am I supposed to do to log in abroad?
    Thanks!

    Hello
    My problem is loggin into my Verizon account via computer/laptop when I am abroad. In the Us I can log into my device both from a computer and from a mobile device.
    The account is set up as “account owner”. I have tried several browser when abroad but I am still not able to login. When I am in the USA I don t have any problem with loggin into my accountI am also able to log into my profile when in the US.
    Can you please help me out?
    Thanks!
    >> Personal information/e-mail reply/headers removed to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • SAP Authentication problem when loggin into CMC

    Hi,
    I've recently started getting the following error when using SAP authentication to log-in to Designer or CMC:
    Account information not recognized: All of your system's 0 Concurrent Access Licenses are in use at this time or your system's license key has expired. Try again later or contact your administrator to obtain additional licenses. (FWB 00014)
    This is a pilot system so had intially entered trial licence keys, but some time back had changed these to the permanent equivalent in CMC. All was working but now get this error.
    When it first appeared I noticed that the entry in registry editor did not match permanent licence key so changed this there and also in CMC - Authentication have changed licence type from concurrent to named users per our licence agreement.
    This has not resolved the problem and struggling to find any other recommended solutions, any help greatly appreciated.
    I'm running BOE XI 3.1 at SP3 with SAP integration kit and crystal 2008.
    Thanks in advance
    Ad

    Thanks Seb,
    All a bit odd, initially deleted licence key and replaced with a trial  NUL licence, and got the same errors. Then tried with trial CPU which worked.
    Also didn't make any changes to the CMC Authentication (still named licences) when inputting the CPU licence key but this seemed to have any effect.
    Have you seen this behaviour before?

  • Problem with loggin Arabic messages on Application Server

    Hi All,
    I'm logging a Text file to the Hard disk on my application, this file has Arabic text.
    The problem is that the Arabic text appears as question marks "????" i don't know why although it writes it correctly when running the application on JDeveloper
    i have JDeveloper 10.1.3.3 and Oracle Application Server 10g Release 3 (10.1.3.1.0)
    any idea ???
    thanks in advance

    Hi,
    For currency, Decimal fields you need to move data into CHAR fields and then transfer to application server.
    MOVE l_CURRENCY TO L_CHAR_CURRENCY.
    CONCATENATE field1
                             field2
                             l_currency
                            into l_file.
    Transfer l_file........
    Best regards,
    Prashant

  • Keymap problem after upgrade

    After upgrade to OS X Mountain Lion I've got keymap problem when loggin in to my work
    thru Citrix.
    I'm loggin in to an Windows machine and did'nt have any problems before upgrade.

    Do you have a bootable clone of the previous working OS?
    IMHO, ML is not ready for prime time.

  • Firefox (12.0, Ubuntu) freezes on Bing maps

    Hello,
    When I try and use Bing maps (maps.bing.co.uk, I live in UK), firefox gets very slow and freezes after about 3 zoom or move operations. I've tried disabling hardware acceleration - with accel on, the whole X server freezes, without it just firefox.
    I've also tried turning network.prefetch-next off, to no avail.
    Safe mode does not help either.
    I know there's a bug report at https://bugzilla.mozilla.org/show_bug.cgi?id=717521 but it's marked as fixed.
    I recently installed chromium and it can handle Bing maps on my system with no problems.
    System:
    IBM thinkpad Z60m / Ubuntu 10.04 (lucid) / 2GhZ processor, 1GB RAM / Kernel 2.6.32-41-generic, Gnome 2.30.2 / Firefox 12.0 (Ubuntu)

    hello, i'm not sure if i'm reading the bugzilla entry correctly but the target milestone is set to mozilla13 (=firefox 13), so maybe it will just finally be fixed with the next update?!

  • Load balancing error while log on

    Hi All,
    I am facing some problem while loggin into sap server.
    logon balancing error 88 : canot connect to message server(RC = 9).
    Can any one please provide me some idea like y its happenign so?
    Tnx,
    Joe

    Hi
    refer the SAP note 882741.
    that helps you to resolve the issue
    Regards
    Manohar

  • Uwc-common-error-server-misconfig

    Hello
    some user from a domain are experiencing this problem. when loggin to uwc
    An error occurred during this operation
    uwc-common-error-server-misconfig
    the version of the messaging server is :
    Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
    libimta.so 6.2-8.04 (built 19:28:07, Feb 28 2007)
    SunOS jesmail 5.9 Generic_118558-21 sun4u sparc SUNW,Sun-Fire-V440
    and uwc:
    showrev -p | grep uwc
    Patch: 118540-21 Obsoletes: 117287-99, 117819-13, 119156-07 Requires: Incompatibles: Packages: SUNWuwc
    Patch: 118540-42 Obsoletes: 117287-99, 117819-13, 119156-07 Requires: Incompatibles: Packages: SUNWuwc
    after the page is reloaded the problem is gone. I checked the error log in the ldap and found the following error:
    [28/Jul/2008:15:18:25 +0200] - ERROR<5895> - Schema - conn=150153 op=56 msgId=14565 - User error: Entry "uid=g1580060, ou=People, o=linter.be,o=jes.vera.be", single-valued attribute "sunUCDateFormat" has multiple values
    how can I fix this attribute for this user because not all the user from the domain suffer from it. are there any special procedures to do it.
    thank you .

    mario_garcia wrote:
    [28/Jul/2008:15:18:25 +0200] - ERROR<5895> - Schema - conn=150153 op=56 msgId=14565 - User error: Entry "uid=g1580060, ou=People, o=linter.be,o=jes.vera.be", single-valued attribute "sunUCDateFormat" has multiple values
    how can I fix this attribute for this user because not all the user from the domain suffer from it. are there any special procedures to do it.Do all the users experiencing the problem have multiple sunUCDateFormat: attributes?
    When did the user(s) start experiencing the problem and what did you change around this time e.g. new patch to UWC, upgraded Directory Server..?
    There is a known bug with Directory Server that can result in the exact error you provided -- bug#6294113 - "DS5.2p3- after first empty replace op. on single-valued attribute no futher add possible - rpl. on".
    The fix is to upgrade to DS5.2p6.
    Note however that the directory values that were 'broken' due to the above bug need to be manually fixed post-applying the directory server patch (the patch only stops future occurrences of the problem). Contact Sun Support to get a copy of the scripts to help you identify and repair these entries.
    Regards,
    Shane.

  • Authentication with Web Accees managment through Headervariable

    Hi All
    We have configured External WEb Access Management Product (reverse proxy, passthrough) for authentication to access our BI Java 7.0 Application using Header variable.We have configured authschemes.xml and UME Properties
    When we are trying to access our BI Java 7.0 Application then get the below Error
    " Cannot logon user defined in header variable"
    Please help me on this if anyone have faced these type of issue
    Waiting for your fast immediate response on this
    Thanks with Regards
    Deelip Kumar

    Hi Patrick
    I have doubt on onething, in visual Administrator the below Login module stacks are available,
      SAP-J2EE-Engine – this is a default configured login module stack that can be used by everyone.
    ·        Basic – allows for Basic Authentication, supported by the Web container.
    ·        Client – allows for client certificate authentication, supported by the Web container.
    ·        Digest – allows for digest authentication, supported by the Web container.
    ·        Form  – allows for form authentication, supported by the Web container.
    ·        Ticket – used for creating and verifying logon tickets.
    ·        Evaluation assertion ticket – used for verifying assertion tickets (tickets used between systems).
    I have selected SAP J2EE Engine and then defined the below Logon stack
    EvaluateTicketLoginModule  SUFFICIENT  {ume.configuration.active=true}
    HeaderVariableLoginModule  REQUIRED  {ume.configuration.active=true, Header=}
    CreateTicketLoginModule  SUFFICIENT  {ume.configuration.active=true}
    BasicPasswordLoginModule  REQUISITE {}
    CreateTicketLoginModule  OPTIONAL  {ume.configuration.active=true}
    it do not understand whether it is right or we should create new policy under policy configuration and the define the above stack.now i am also facing problem in loggin to Visual adminstrator
    Please suggest
    Thanks with Regards
    Deelip Kumar

  • Hey Guys...have you noticed SDN portal is not in good health...?!!!

    I just wanted to mention one thing that from yesterday SDN is not working properly...i mean i am clicking on something and it's taking me somewhere else..plus other guys account are automatically opening at my end without entering their account details..!!
    Any system issue?
    Regards,
    N
    Edited by: Nitesh Nagpal on Jun 11, 2008 9:44 AM

    Hello Everyone,
    I also have come across the same problem about loggin into someone else's i.d and could also view details on the other loggin.
    Regards
    Tejashree

  • Problem with Z60m R&R

    Hi,
    I have a Z60m (2530-37U) and am having a lot of problems with Windows XP being very slow. I tried to create R&R disks from the Think Vantage app, but it won't launch. I then bought a new HDD and installed it, I used the BIOS to "restore to factory" settings but after hours of that, there were essentially no drivers for this model, so I had no NIC and the video drivers were VGA only.
    I created R&R disks from this install and tried to restore to factory settings and again after hours of CD swapping, etc, it installed Windows XP "Home" and still had a serious deficiency of drivers.
    Any thoughts on what I am doing wrong? I am just trying to get this machine back to XP Pro, factory settings.
    Thanks,
    --Pete

    well you should reenable it from your bios. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Standby problem - Z60m

    In Windows XP, sometimes when I put my Z60m into standby mode, it will not boot back up. It normally will enter the standby state correctly, with the standby light being the only indicator that is lit. After some amount of time (usually between ten to fifteen minutes), the battery light will spontaneously light up. While this light is on as well, there is no way to bring the system out of standby. Sometimes the battery light turns off again, and it is possible to bring the system back, but often it stays lit and I have to do a forced power-off and reboot the system completely. This is a bit frustrating; has anyone else had the same problem? My first thought was something to do with BIOS.

    Dear Friend !
    Get used to it. It is LENOVO. Their upper-most-class million dollar computers (like my Z61p) worth  a piece of **bleep**. It looks perfect. It can give you a wonderfull short-term experience. But when you use it day after day you realise that it is UNSTABLE. I'll never recommend lenovo to anyone. Their support is even more LOL !
    ---- snitt --- by the way i OF COURSE have the same standby problem. I just dont post it. What for ?
    They dont give a **bleep** LENOVO&MS are working on their next top-class systems. PROFIT is what matters these days. Not Quality.
    Note from Moderator: Watch your language.
    Message Edited by nonny on 04-21-2008 08:27 AM
    I recommend reading http://www.suyogdeshpande.net/blog/2006/12/15/lenovo-3000-n100-review/
    and watching http://www.youtube.com/watch?v=qCr9oKZVWtM
    DONT BUY LENOVO !

  • Help needed. Having problems loggin in to my computer

    Hi,
    I recently upgraded to Mac os X 10.5, and since then I have been having all kinds of problems loggin in to my computer. It is not recognizing my password. I reset the Admin password using the install dvd disc, but that still didn't help. I loggin but I don't have access to any of my files or documents. Could someone please help.
    Thanks in advance.

    you really need to decide if you are going to reinstall or try to fix your current system. I just posted a long answer to your other thread.
    is your current account listed as admin in system preferences?
    and what happens if you try to log into your old account?
    Message was edited by: V.K.

  • Z60m Sleep Mode Problem

    Hi.
    I am the until now happy owner for a Lenovo z60m.
    Problem is, whenever I start up the only 3d Application I have on my computer (World of Warcraft). It takes between 30seconds to 5 minutes before the computer automatically goes to sleep mode, even if I am physically pressing buttons and doing stuff.  I've checked all settings up and down, inside out. Checked the BIOS etc. The computer works perfectly fine as long as I am not running this 3d applicaton. I have of course tried reinstalling the computer and updated drivers etc. but I can not seem to get rid of this problem. I must also say that the problem is recent and that I did not have it earlier.
    I hope someone here has a suggestion to a solution to this problem as I have scavenged the web with no luck so far.
    Model:
    Z60m 2529-FKG
    Best Regards
    Henrik

    so what you are saying that if you run the WoW than put into sleep mode it would take 30 s to 5 minutes to sleep whilst you are still running the WoW app.... this is normal as before you go to sleep mode, the computer would basically save all your data to the harddrive and ram so when it wakes up, you have all the required files and program access to continue what you do before it goes to sleep with minimal delay..... the more data you have in your physical ram, the longer the process should be, and WoW is by no means a small program set.... so its not really a laptop problem, its just the limitation of the current hardware technology and the software set that supports it....

  • Problems loggin in Oracle Enterpirse Manager Console

    Hi. I installe oracle 9i and managed to setup a development and OEMREP databases and successfully logged into the Enterprise Manager Console. But after a few days, out of the blue, I can't login anymore.
    I'm getting the following error msg:
    "The exception (oracle.sysman.emSDK.client.omsClient.ClientException) ocurred"
    Did anyone encounter the same problem?
    Any ideas?
    Thanks!!

    This has happened to me many times. First look at the node status in oem, probrobly is stating that it is out of sync. Even if it isn't save all your jobs to the library. Delete the node. Then on the solaris side
    shutdown the agent, delete the *.q files out of the $ORACLE_HOME/network/agent directory, then restart the agent. Now back on oem rediscover the node. You should then be able to resubmit the jobs from the library.

Maybe you are looking for