Problem in login with slim to xfce

I successfully installed xfce and it well works by starting with command "startxfce4".
I installed slim for graphical login (according to the instruction given in the wiki), but it does not work.
When uncommenting "exec startxfce4" in .xinitrc, after login it returns to the login page again.
If not commenting "exec startxfce4" in .xinitrc, it login and stay with slim wallpaper. I mean login is successful, the problem is at "exec startxfce4" command, which lead to the login page instead of loading xfce.
With the same settings, I was able to successfully use LXDM. Of course, for LXDM, I set it globally in /etc/lxdm/lxdm.conf
Last edited by etrader (2012-09-23 20:08:29)

Show your .xinitrc and slim.log.

Similar Messages

Problem in login with sys

hi,
i have a problem in login with sys, the situation as follows:
1- when i try to connect using : sqlplus "/as sysdba" or "sys/password as sysdba" it connect me to the DB.
2- when i try to connect : sqlplus "sys/password@MYDB as sysdba" it gives me "ORA-01017: invalid username/password; logon denied".
3- when i try to connect with another user i.e : sqlplus "system/password@MYDB" it connect me to the DB.
DB version : 9.2.0.8
OS version : Solaris 10
please advice...

1- when i try to connect using : sqlplus "/as sysdba"
or "sys/password as sysdba" it connect me to
the DB.This works anyway, because you're authenticated by OS. Example :
SQL> conn sys/aaaa as sysdba
Connected.
SQL> conn sys/bbbb as sysdba
Connected.
SQL>
2- when i try to connect : sqlplus "sys/password@MYDB
as sysdba" it gives me "ORA-01017: invalid
username/password; logon denied".Here you need the real password, so make sure you're using the correct one.

Problem in login with scott/tiger in SQL Plus

Hi,
I want to login with Scott/Tiger in SQL Plus, I have client on my machine, I can connect to any database by entering entry in tnsnames.ora file, but when I try to login with scott/tiger, Protocol adapter error comes, Do I need to enter any thing in tnsnames.ora file? if yes, please tell me the entries,
Thanks
Nidhi..

I have modified tnsnames.ora file, Below is this file
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
Now i ger error
Error: ORA-12541: TNS: no listener
Regards,
Nidhi..

Problem during login with an account

Hi all
I have setup two different login accounts on my maverick 10.9.2, but with one of them every time i log in with this account (after a reboot), i have to reregister with the appleID and the mac will be reconfigured again for this account. With the other account there is no problem like this.
Hope somebody can help me.
thanks

Hello
Just for test ,make a new account ( system pref ->account -> + button ) , and try configure mail again
if that work , your problem with mail locate on your account ( preference , caches ,font somwhere into library folder )
if not work in new accout , may have problem in mail app or system
HTH
Pierre
PS : delet files into library folder could be VERRY destructive !! be carefull

Got a new MacBook pro but for some reason I can't connect to my schools wireless. It doesn't have a problem connecting to any other wifi. My schools network is unsecured all you do is login with your username and password but the window never loads

I jus got a MacBook pro and Im having trouble connecting to my schools network. It is not secured and only requires to login with school id. A Window pops up to sign in but it never loads anyone know why I'm having this problem? Doesn't have a problem connecting to any other wifi

"This is a flaw in OS X Lion. It does not want to connect to open WiFi that has a login page that open in a browser."
Nonsense, no problems logging in at sites that you mention. I use OpenDNS servers. For the OP try:
System Preferences>Network>Advanced>DNS. In the left side column click on the + sign and insert the following:
208.67.222.222
208.67.220.220
Then click OK, then click Apply.

Having problems with Slim...running ssh-add in my bashrc

I have my .bashrc file setup to start an ssh-agent and prompt me for my SSH key's passphrase the first time it is executed. This worked fine before I started using a login manager (Slim) since an interactive shell was started before I ran startx. My problem now is that Slim must be running my .bashrc since it hangs while waiting for input (for ssh-add). Since I have no interactive shell the only way I can end the hang is by switching over to tty6 and killing ssh-add. How do I correct this?
Here is the code that starts ssh-agent and runs ssh-add...
SSH_ENV="${HOME}/.ssh/envrionment"
function start_agent {
ssh-agent | sed 's/^echo/#echo/' > "${SSH_ENV}"
chmod 600 "${SSH_ENV}"
source "${SSH_ENV}" > /dev/null
ssh-add
if [ -f "${SSH_ENV}" ]; then
source "${SSH_ENV}" > /dev/null
ps -ef | grep "${SSH_AGENT_PID}" | grep ssh-agent$ > /dev/null || start_agent
else
start_agent
fi
I also have
[ -z "$PS1" ] && return
at the top of my .bashrc.
Thanks,
Scott

Back when I used slim, I solved this by changing login_cmd in slim.conf from /bin/bash to /bin/sh.
If you want to know why this works, read the INVOCATION section of the bash man page.

TS4001 Anybody having problems accessing Adwords Exspress login with Safari ?

Anybody having problems accessing Adwords Exspress login with Safari ?

Hi jhankins,
There was a problem yesterday for a brief half an hour to 1 hour, please let us know if you are still facing that issue.
-Ankit

Problem:Member is Read only Mode after login with other user

Dear,
I am facing problem to enter the data in member. i.e Read only. but same member is fine with login with admin user.
I also assign the security with write permission to user. but the only that member "X" is in read only mode..
Is task list can effect on that??? as i am also using task list. Becoz when i add another member that is not member of that hirechiary its fine.
I am working on hyperion version 11.1.2.1..
Regards,
AMSI

Thanks, Problem has been solved myself becoz when i add new member in the form as this form is already part of Planning Unit Hierarchy , that's why the newly added member in the form can't be write only till up to when u add this member into Planning Unit Hierarchy.
Regards,
AMSI

Apple tv 2 problem: I can not login with my ID account!!!!!

apple tv does not login with my ID! Do you have a solution? Since a few weeks I can not login in with my password...
I tried everything:
- re-starting apple tv.
- login on macbook with my apple ID with new password

Signal Strengh on WiFi was great (its a new Apple Time Capsule and has to be reset often). Checked the internet connectivity on other machines too (incase that was inop). I checked the network first as that is typically a impediment to all other things working prior to my previous comment. I logged in to iTunes and MobleMe to see that my password was correct and working. hmmm.
I reset the Apple TV next and again changed my iTunes password on my laptop, then ran a network test (which needs a itunes password to work). Network check was successful and I am logged back in.
Now it says...."Netflix is currently unavailable. Try again later".
geez.

Problem in CMC login with SAP authentication type

Hi,
We have installed the SAP Integration kit successfully for BO XI R2 & when I logon to CMC i am able to enable the SAP authentication and import the roles from the SAP BW system as well. But when I try to login into CMC using the 'Authentication type' as SAP it doesn't display the textboxes for entering System ID and Client details. Can you please tell me how to fix this?
Also I see that the CMC & Infoview authentication type drop down list are not the same. The CMC has the authentication types available as 'SAP,LDAP & Enterprise' where as Infoview has 'Enterprise, LDAP & AD'.
Is this an issue with the Plugins? do i need to do some settings on the Tomcat ?
Please help me out in this..
Thanks in advance!
Phani.

Thanks for your update Jac...yes thats correct. Also I had to include authPlugExt.properties file in the tomcat/shared/classes, which i did not include previously. The SAP infoview is working fine now.
Just one more question, in CMC login doesn't the SAP authentication require sap system & client id as its inputs? (in XI R2). I noticed that I was able to login with SAP user id's (without mentioning system details) , that have been added when I have imported the SAP roles to BO.

[SOLVED]Mounting usb drives "not authorized" with thunar-volman (XFCE)

Hi,
I'm new to Arch (even though I must be approximately at my 15th try at installing it properly) and I have a problem with thunar-volman.
Whenever I log in as user, and try to mount a usb drive with thunar, let's say I want to plug a drive labeled Ext3_8Go, I get the same message in a pop-up window : "Failed to mount Ext3_8Go (or anything close, not in English in the text), not authorized (that part is in English)"
My install is :
- net install
- partitions : 9Go for /, no swap, no separate /home
- packages : base and base-devel. The only modifications in the package list is that I remove ppp, pcmciautils, and xfsprogs.
- config : at the install stage I only modify rc.conf to change LOCALE and HOSTNAME, and pacman's mirrorlist to allow all French mirrors in addition to the one at the top.
When the usb installation is over, I run this script :
"installation_xfce.sh" (there may be some errors left, I modify this script as I learn) :
#!/bin/bash
# expected environment : freshly installed archlinux, login : root.
echo "Are you connected to internet ? If not, please Ctrl+C and reload this script when connected"
echo "Otherwise, press ENTER to continue installation"
read var_dummy
echo "Creation of the user : please type in your user name :"
read var_username
useradd -u 1000 -g users -G audio,lp,storage,optical,video,wheel,games,power,network -d /home/$var_username/ -s /bin/bash -m $var_username
echo "You will now be asked to create the password for this user:"
passwd $var_username
# Add servers for pacman to find packages
cat >> /etc/pacman.conf << EOF
[multilib]
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/\$arch
EOF
# Install packages
pacman -Syyu
pacman -S acpi acpid alsa-oss alsa-plugins alsa-utils catalyst catalyst-utils cpufrequtils cups dbus gstreamer0.10-base-plugins iptables laptop-mode-tools mesa net-tools netcfg ntp pm-utils rfkill rsync sudo ttf-dejavu vim wireless_tools xf86-input-evdev xorg-server xorg-utils xorg-xinit xorg-xinput yaourt conky gamin gnome-icon-theme gnome-keyring gvfs-afc network-manager-applet networkmanager slim slim-themes archlinux-themes-slim hicolor-icon-theme xfce4 xfce4-goodies
# If pacman failed, better stop the script here, and wait for a network connection
if [[ $?!=0 ]]
then
echo : failed to install packages - check your network connection, or review script
exit 1
fi
# Fix sound issue
cat > /home/$var_username/.asoundrc << EOF
pcm.!default{
type hw
card 1
device 0
ctl.!default{
type hw
card 1
device 0
EOF
chown $var_username:users /home/$var_username/.asoundrc
# Configure video settings for X to use Catalyst
if [[ ! -e /etc/X11/xorg.conf.d ]]
then
mkdir /etc/X11/xorg.conf.d
fi
cat > /etc/X11/xorg.conf.d/20-fglrx.conf << EOF
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
EndSection
EOF
sed -e 's/top_left/bottom_right/' -e '/alignment/i\double_buffer yes' -e '/CPU Usage/a\${color lightgrey}Temperatures:' -e '/CPU Usage/a\ CPU:$color ${hwmon 0 temp 1}°C' </etc/conky/conky.conf >/home/$var_username/.conkyrc
chown $var_username:users /home/$var_username/.conkyrc
# Install clickpad support
yaourt -S xf86-input-synaptics-clickpad
# Add french keyboard to X
sed '/MatchIsKeyboard/a\\tOption "XkbLayout" "fr"' </etc/X11/xorg.conf.d/10-evdev.conf >/etc/X11/xorg.conf.d/10-evdev.conf.new
mv -f /etc/X11/xorg.conf.d/10-evdev.conf.new /etc/X11/xorg.conf.d/10-evdev.conf
# Add new daemons, remove old ones, disable hwclock and remove netfs since I don't use it. add it if you need it
sed '/DAEMONS=/c\DAEMONS=(!hwclock dbus syslog-ng networkmanager laptop-mode acpid @alsa @cupsd @cpufrequtils ntpd crond)' </etc/rc.conf >/etc/rc.conf.new
mv -f /etc/rc.conf.new /etc/rc.conf
# Slim login manager ; change theme
mv /usr/share/slim/themes/archlinux-darch-grey /tmp/
mv /usr/share/slim/themes/default /tmp/
rm -r /usr/share/slim/themes/*
mv /tmp/archlinux-darch-grey /usr/share/slim/themes
mv /tmp/default /usr/share/slim/themes
sed '/^current_theme/c\current_theme archlinux-darch-grey' </etc/slim.conf >/etc/slim.conf
# XFCE login, and thunar launched as a daemon
sed '/^# exec/c\' </etc/skel/.xinitrc >/tmp/.xinitrc
sed '/^# .../c\' </tmp/.xinitrc >/home/$var_username/.xinitrc
cat >> /home/$var_username/.xinitrc << EOF
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc
# Boot to runlevel 5 now, and run slim then
sed -e 's/id:3/#id:3/' -e 's/#id:5/id:5/' -e 's|x:5:respawn:/usr/bin/xdm|#x:5:respawn:/usr/bin/xdm|' -e 's|#x:5:respawn:/usr/bin/slim|x:5:respawn:/usr/bin/slim|' </etc/inittab >/etc/inittab.new
mv -f /etc/inittab.new /etc/inittab
# Add colored prompt to user and root
sed '/^PS1/c\' </etc/skel/.bashrc >/root/.bashrc
cat >> /root/.bashrc << EOF
PS1='\[\e[0;32m\]\u@\h\[\e[m\] \[\e[0;35m\]\w\[\e[m\] \[\e[m\] \[\e[0;32m\]\t -\[\e[m\] \[\e[1;31m\]\$ \[\e[m\] '
EOF
cp /root/.bashrc /home/$var_username/.bashrc
chown $var_username:users /home/$var_username/.bashrc
# How does one do that automatically ?
# Manually add user to sudoers
EDITOR="vim" visudo
# Reboot, because it's quick and I'm too lazy to learn how to start all the daemons and others.
reboot
I can mount as a user, no password asked, with :
udisks --mount /dev/sdb2
but the GUI method tells me "not authorized".
"groups user" outputs :
lp wheel games network video audio optical storage power users
the command "ck-list-sessions" outputs :
Session2:
unix-user = '1000'
realname = ''
seat = 'Seat1'
session-type = ''
active = TRUE
x11-display = ':0.0'
x11-display-device = '/dev/tty7'
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2011-08-15T08:56:03.716103Z'
login-session-id = '1'
Session1:
unix-user = '1000'
realname = ''
seat = 'Seat2'
session-type = ''
active = FALSE
x11-display = ':0.0'
x11-display-device = ''
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2011-08-15T08:56:03.573029Z'
login-session-id = '1'
For those who don't have time to read the installation script, DBUS is in the DAEMONS list of rc.conf, and .xinitrc launches : exec ck-launch-session startxfce4
Any idea ?
Last edited by choubbi (2011-08-15 15:05:04)

Thanks a lot !
That worked !
I stumbled across this part of the wiki several times before, but didn't really understand so I had not tried.
If anyone's interested in the script, here's the corrected version :
#!/bin/bash
# expected environment : freshly installed archlinux, login : root.
echo "Are you connected to internet ? If not, please Ctrl+C and reload this script when connected"
echo "Otherwise, press ENTER to continue installation"
read var_dummy
echo "Creation of the user : please type in your user name :"
read var_username
useradd -u 1000 -g users -G audio,lp,storage,optical,video,wheel,games,power,network -d /home/$var_username/ -s /bin/bash -m $var_username
echo "You will now be asked to create the password for this user:"
passwd $var_username
# Add servers for pacman to find packages
cat >> /etc/pacman.conf << EOF
[multilib]
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/\$arch
EOF
# Install packages
pacman -Syyu
pacman -S acpi acpid alsa-oss alsa-plugins alsa-utils catalyst catalyst-utils cpufrequtils cups dbus gstreamer0.10-base-plugins iptables laptop-mode-tools mesa net-tools netcfg ntp pm-utils rfkill rsync sudo ttf-dejavu vim wireless_tools xf86-input-evdev xorg-server xorg-utils xorg-xinit xorg-xinput yaourt conky gamin gnome-icon-theme gnome-keyring gvfs-afc network-manager-applet networkmanager slim slim-themes archlinux-themes-slim hicolor-icon-theme xfce4 xfce4-goodies
# If pacman failed, better stop the script here, and wait for a network connection
if [[ $?!=0 ]]
then
echo : failed to install packages - check your network connection, or review script
exit 1
fi
# Fix sound issue
cat > /home/$var_username/.asoundrc << EOF
pcm.!default{
type hw
card 1
device 0
ctl.!default{
type hw
card 1
device 0
EOF
chown $var_username:users /home/$var_username/.asoundrc
# Configure video settings for X to use Catalyst
if [[ ! -e /etc/X11/xorg.conf.d ]]
then
mkdir /etc/X11/xorg.conf.d
fi
cat > /etc/X11/xorg.conf.d/20-fglrx.conf << EOF
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
EndSection
EOF
sed -e 's/top_left/bottom_right/' -e '/alignment/i\double_buffer yes' -e '/CPU Usage/a\${color lightgrey}Temperatures:' -e '/CPU Usage/a\ CPU:$color ${hwmon 0 temp 1}°C' </etc/conky/conky.conf >/home/$var_username/.conkyrc
chown $var_username:users /home/$var_username/.conkyrc
# Install clickpad support
yaourt -S xf86-input-synaptics-clickpad
# Add french keyboard to X
sed '/MatchIsKeyboard/a\\tOption "XkbLayout" "fr"' </etc/X11/xorg.conf.d/10-evdev.conf >/etc/X11/xorg.conf.d/10-evdev.conf.new
mv -f /etc/X11/xorg.conf.d/10-evdev.conf.new /etc/X11/xorg.conf.d/10-evdev.conf
# Add new daemons, remove old ones, disable hwclock and remove netfs since I don't use it. add it if you need it
sed '/DAEMONS=/c\DAEMONS=(!hwclock dbus syslog-ng networkmanager laptop-mode acpid @alsa @cupsd @cpufrequtils ntpd crond)' </etc/rc.conf >/etc/rc.conf.new
mv -f /etc/rc.conf.new /etc/rc.conf
# Slim login manager ; change theme
mv /usr/share/slim/themes/archlinux-darch-grey /tmp/
mv /usr/share/slim/themes/default /tmp/
rm -r /usr/share/slim/themes/*
mv /tmp/archlinux-darch-grey /usr/share/slim/themes
mv /tmp/default /usr/share/slim/themes
sed '/^current_theme/c\current_theme archlinux-darch-grey' </etc/slim.conf >/etc/slim.conf
# XFCE login, and thunar launched as a daemon (note that the part with 'if [ -d /etc/X11/xinit/xinitrc.d ]" is not present, to avoid mounting problems when logged as regular user)
cat > /home/$var_username/.xinitrc << EOF
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc
# Boot to runlevel 5 now, and run slim then
sed -e 's/id:3/#id:3/' -e 's/#id:5/id:5/' -e 's|x:5:respawn:/usr/bin/xdm|#x:5:respawn:/usr/bin/xdm|' -e 's|#x:5:respawn:/usr/bin/slim|x:5:respawn:/usr/bin/slim|' </etc/inittab >/etc/inittab.new
mv -f /etc/inittab.new /etc/inittab
# Add colored prompt to user and root
sed '/^PS1/c\' </etc/skel/.bashrc >/root/.bashrc
cat >> /root/.bashrc << EOF
PS1='\[\e[0;32m\]\u@\h\[\e[m\] \[\e[0;35m\]\w\[\e[m\] \[\e[m\] \[\e[0;32m\]\t -\[\e[m\] \[\e[1;31m\]\$ \[\e[m\] '
EOF
cp /root/.bashrc /home/$var_username/.bashrc
chown $var_username:users /home/$var_username/.bashrc
# How does one do that automatically ?
# Manually add user to sudoers
EDITOR="vim" visudo
# Reboot, because it's quick and I'm too lazy to learn how to start all the daemons and others.
reboot
The important part of the script to solve the problem is :
cat > /home/$var_username/.xinitrc << EOF
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc

Issue with Slim and OpenBox

Hi to everyone:
I've installed Slim + OpenBox in one machine PIII-450 MHz., 256 MB RAM, HD 8.5 GB.
I've one issue now: when the system is starting, I can see the login prompt at the console, after one black screen by 20 seconds and appears the screen login from Slim.
Someone else with the same problem ... anyone knows how to fix it?

pyther wrote:How are you starting slim? What are you expecting it to show while X/Slim is loading?
This is the /etc/inittab file:
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
x:5:respawn:/usr/bin/slim >& /dev/null
# End of file
This the /home/user/.xinitrc file:
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec openbox-session
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
If I compare KDM + KDE vs Slim + OpenBox, this last mix is slowest.
Could be fastest or I need another Login Manager for OpenBox?

When i login with microsoft account cannot access with administrative share c$

i have a problem when i login to windows with microsoft account cannot access any network computer with administrative sharing c$,d$ with windows 8.1
but when i login with local account can access
and some people tell me create key in regedit t fix it
after enter user name and password show this error
and i apply your instruction and not fix until now
note:
my Machine windows 8.1 if another machine in network windows 7 can access a hidden share if machine in network windows 8.1 show this message in image 2
but if i login with local user can i access all machine hidden share network windows 7 and 8.1

yes this computer i want to access name poland2-work and have two users
first :administrator
second : poland 2

Cannot login with AD credentials on iMac

Greetings:
I have a brand new 27" Intel iMac that had been allowing AD logins just find until today. Now, no matter what I do, unbinding, rebooting, manually joining domain (dsconfigad), etc I cannot login using my AD credentials. This had been working flawlessly until today. I can bind to AD no problem. When I go to login with my known good account, I just get the window shake. Logging in with a local account, I see error messages in the console of:
DNS Update Failed & Enter Machine Password
The machine account is already staged in our OU. I am not clear what the DNS error is alluding to.
reading through these postings: http://www.macwindows.com/snowleopardAD.html
I tried disabling creating mobile accounts at login. However that did not fix the issue.
I believe our campus is running Win2K8 AD servers. Our campus DNS appliance is a separate box, but should know how to delegate to AD (?). The other 10.6.3 machines we have, are authenticating against AD fine.
Any ideas?

Marcus is correct - the ZAM administration accounts (ZAM 7.x) are stored (encrypted) within the ZAM database.
Within ZAM 7.x there is no way to integrate this with AD (either by LDAP referral or some kind of identity / password sync) and AFAIK no plans to add this.
I believe in the ZCM version of asset (and I hope the standalone version of ZAM10 still in dev) you set up the AD account(s) that is/are allowed Admin etc. access within ZAM, then LDAP referrals are used to authenticate via AD. I don;t know this for sure, though.

Unable to login with Jabber Windows

Hi ,
Am unable to login the Jabber Windows Client. Getting the error as "Unable to Communicate With the Server".
Able to login with CUPS & CUCM end user page. CUCM Integrated with LDAP.
While going through the UP Profile logs seen that "Failed to SOAP login".
Tried with restart of CUCM & CUPS several times but no go.
CUCM Version - 8.6.2
CUPS Version - 8.6.1
Tried with CUPC client result also same.
Thanks in Advance

If credentials work on CCMuser CUPSuser I would suspect either some kind of communication problem between the clients and the servers and/or misconfiguration (user/device/line association, device owner, roles, CTI/CCMCIP profiles, etc) on CUCM/CUPS.
Specially because you mention the same happens with CUPC.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Problem in login with slim to xfce

Similar Messages

Maybe you are looking for