Problem in MARA table for the field PSTAT

Dear all,
I am facing a problem with mara table , for a material it is showing "C" Classification status in MARA table in field PSTAT
But if im going to Transaction MM03 with the same material im not able to find any Classification view there(mm03).
Please help me why is this happening and what is the possible solution for this .
Many Thanks!!!
rewards will be given....

Hi,
In  relation to the issue, there are a number of reasons why the                              
classification view may not be displaying in MM02/MM03:                                                                               
1. OMS2 customising settings for material type                                               
2. OMT3 customising settings for the screen sequence                                         
3. Authorisation object M_MATE_STA                                                                               
If these settings are correct, kindly refer to the note 113966.                          
If there are inconsistencies in the material status in MARA and MARC                          
then report ZRMMMSTAT outlined in this note should resolve the issue.                         
Best regards
Erika

Similar Messages

  • R/3 tables for the fields of  0fi_gl_40

    How to find the r/3 tables for the fields of the datasource 0FI_GL_40.For example this datasource has ANLN1(Asset),ANLN2(Asset Subnumber) and AUFNR(Order)
    fields.Is there any tcode or table that gives the r/3 tables for the the fields of the above datasource?

    Sometimes the help really does provide the information
    http://help.sap.com/saphelp_nw70/helpdata/EN/88/3c36861f874739a916df63ab6d7ca0/content.htm

  • Master table for the field BSART

    hi friends
    pls tell me, which is the master table for the field BSART.
    because i want to get the search help fo that field....

    Hi babu,
    If u want know what the table and where the fields are resued go to T-code SE15. u can find ...
    Regards,
    Bharani.

  • Table for the field MAT

    Hello,
    I want to know the table name for the field MAT (maintenance Activity type) in PM.
    Searched all the tables in the PM but unable to find the field.
    Basically this MAT should be in shynchronization with the Applicant Number in the PS that is the field ASTNR in PRPS.
    Could anybody help me out.
    Pooja

    See the table AFIH field ILART

  • Data not saved in the table (for the field created through AET)

    Hi,
    I have created few fields using AET for a transaction type.
    The fields are created successfully and we are able to add them in my custom config.
    I followed step by step the following link The New AET table Extension Feature of Ehp1- Creating your own components
    However the values of these fields are not stored in the ZTable.
    I had  defined  Form view ( 1:1 cardinality)  within the wizard itself.
    Help!!!
    Regards
    Omar BB

    Hi,
    Check whether your ZRelation Depenedent object entity is getting filled or not.....after input some values.....
    Regards,
    Sumeet

  • Which table for the field "Net due date" of customer line items?

    Hi All,
    In which table could I find the field "Net due date" of customer line items?
    Thanks
    Gandalf

    I don't think there is a field for that.  In various SAP screens where you see this field, I think it is a calculated value (baseline date ZFBDT + days ZBD*T).

  • How to find config table for the field "language" in infotype-0002

    Hi Gurus,
    We are implementing ECC 6.0 at our client site.
    The client wants to use language field in persoanl data infotype as mother tongue and include indian languages.
    He don't want all other languages like spanish etc instead he wants indian languages like Hindi,telugu,tamil etc.
    can any body please help me in which table we can configure this.
    Thanks in advance
    Regards
    AnanyaK

    Hi,
    You can enter the languages in the IMG
    Path is
    IMG-> Personnel Management-> Personnel Administration -> Personnel Data-> Languages
    Or  you can simply go for technical information in the field name and will get the table name for that field and can maintain in SM30
    Regards,
    Kapil Kaushal

  • R/3 table for the field DDUCT (Deduction)

    Hi all,
    I have a R/3 field DDUCT (Deduction) which needs to be mapped to BW. Can you please tell me from which tables in R/3 can i get this field. Is there some t-code where i can check the tables in which a particular field is present?
    Regards,
    Anupama

    Hi Anupama,
    Always check in se11 with option data type.
    DDUCT is not coming from database table.
    The values are specified in domian itself with values yes or no. always you will get these two values in BW or in r/3.
    Hope this helps.
    Regards,
    Reddy.

  • Need tables for the fields

    Hi,
            I want to know the tables where these fields can be available...
         Field “SERNR1”  -  Serial Number
    •     Field “MATNR1” – Assy Matl
    •     Field “SERNR” – Assy Serial NO
    •     Field “ARKTX” – Assy Description
    Pls let me know as soon as possible..

    Hi,
    check table vbap / VBRP/ LIPS , in those tables you can get
    ARKTX,MATNR,SERNR  fields.
    But there is no field with the name sernr1 in standard databse tables. May be that you can find in customized tables created specific to your project.that we cant see .
    but about matnr1 you can get in the following tables.
    VCRSELA_RES      Cross Selling Analysis: Results     
    HBSRLS           Affected Building List              
    Regds
    Sivaparvathi
    Please reward points if helpful...
    Edited by: Siva Parvathi on Dec 20, 2007 11:34 AM

  • DB Table for the field RIMR0-CNTRC , Which is structure

    Hi,
    Help me to find the DBtable where the field RIMR0-CNTRC(Structure) update.the transaction used is ik17.
    I have tried all possible ways , inturn it shows structures.
    Richard

    Goto SE15 -> ABAP Dictionary -> Table fields -> Only specify the field name and  execute.
    It will display all DB tables which has that field.
    Reward if its useful.
    Regards,
    Sail

  • Table for the field GROUPNAME

    Hello All,
    Can anybody tell me in which table costcenter group name is stored(field name is groupname).
    Thanks,
    Vibha

    Cost center groups are stored in SETs..
    So look at tables begining with SET
    SETHEADER and SETHEADERT (texts) for Sets header
    SETLEAF for values in set
    SETNODE for lower level nodes
    Regards

  • Table for the Field PLPOD-PVZNR-Super Ordinate Node in Recipe

    Could someone help me to know, from which table can I get the values of the super ordinate node - field - PLPOD-PVZNR-- which is entered while creating a recipe using TCODE - C201.
    I have checked in Table PLPO, but it does not seem to exist there.
    I have searched a lot but the solution is still eluding.
    Thanks in advance.

    I know table BEREIT and have checked it - IT does not have any data.
    I want to get the this field PLPOD-PVZNR, given the RECIPE GROUP adn GROUP COUNTER.
    Thanks

  • Tables for the following fields

    what are the tables for the fields cartonization,intro month,supply end month,delete month and non-colloboration.All are from MM.

    hI,
    Go to table DD03T.
    See the Contents of the Table(CtrlShiftF10)
    In DDTEXT give Your Field Description
    Like totalAmount*
    Then Press F8.
    You will get all the fields related to it.
    Regards
    Sandipan

  • How to find the Check table for a field ?

    Hello All,
            I have the filed name f1.
    Now I want to know the check table of this field programatically and if this field has a configuration table then I need that table also.
    eg: if werks is the field the Master         Table is : MARC
                                    and Configuration Table is : T001W.
    Is this possible first of all programatically ?
    If yes can anyone help me out ?
    Regards,
    Deepu.K

    Hi again,
    1. I don't know the master table for the field werks
    A field is never independent. It is always linked to a table,
    otherwise the information is only half.
    2. So incase if we do not know the tablename,
       its best to query the table DD03L with WERKS,
      and filer out CHECKTABLE with *,
      and take any one record.
    regards,
    amit m.

  • GB01 Table - Include the field BSEG-ZLSCH for the substitution rule

    Dear all,
    I am facing a problem in the configuration a Substitution Rule. I need to create a new substitution rule for the field BSEG-ZLSCH (Payment Method). 
    I am trying to include the field BSEG-ZLSCH in the table GB01, but it is impossible, the GB01 Table is not changeable.  I not found out any Notes to solve this issue..
    Does any body know how to change the GB01 table? Is it necessay to open an OSS to SAP?
    Thanks in advance
    Aguinaldo Masetto
    Accenture do Brasil Ltda.

    Hi,
    To make BSEG-ZLSCH substitutable you would need to write a short (10 lines or so) ABAP program to remove the 'X' from the field BEXCLUDE in the GB01 table. or You can remove this in debugging mode.
    The 'X' marking meaning that the field is not available for Substitution as outlined in the note: 42615
    Please note:
    If you release fields other than the ones listed for substitution, then you must take responsibility for all the consequences!
    Regards
    Ravinagh Boni

Maybe you are looking for

  • Hashmap and array list problems

    This is an assignment I have to do and I do NOT expect anyone to do the coding for me. I am just looking for some direction as I have no clue where to go from here. Any guidance would be very welcomed. We were given code that used just an Array lisTh

  • External monitor flickers when scroll on the google stock chart in Safari

    Well, this sounds crazy but this is what is happening to my Retina, 15-inch, Late 2013 Macbook Pro. I can reproduce it. 1. Go to this page in Safari (Version 7.1 (9537.85.10.17.1)): https://www.google.com/finance?q=LQD&ei=nQQ_VPj1H4ebrAHP6oDYDQ 2. Sc

  • Ipod connects now only as USB 1.1

    Hi, I have my ipod for years and I never had this problem. Since few days an information message appears when I connect the ipod to my mac mini, telling me that the connection is only USB 1.1 (directly to the Mac Mini, this can not be the case). I re

  • Color grading workflow question

    Lets say I want to color grade my whole Final Cut project, should I grade each RAW clip individually then edit in FCP? If you do grade each RAW file wouldn't take take too long since I only use a portion of the raw clip? or should I import that whole

  • Transport of modifications with ChaRM in client "000"?

    Hi, I do have a typical logical component DEV:100 -> QAS:100 -> PRD:100. For standard customizing and workbech tansports all is working fine. Now I have done a modification on a standard SAP object. Therfore the system wants to have a transport for c