Problem in master data

Hi All,
We have stock info cube in which we are updating Distribution Channel using update rules 0CUST_SALES.There was a problem in Update rule for distribution channel.
Till now we were loading master data weekly. So, my 0CUST_SALES contains lots of records without Distribution channel,Division and Sales org.
Just because of these when i check my stock at Distribution channel level it shows me wrong figure.
Is there any way of removing initial values for Distribution channel,Divsion and sales org from 0CUST_SALES ??
Regards,
Viren.

Hi,
Now are loading master data daily.
Blank attributes are navigational as well as in the dimension of the cube also.
But for single Customer there three to four records.How to remove records with attributes having initial values ? Because Customer can not have Division,Distribution Channel,Sales Org as blank field.
Regards,
Viren.

Similar Messages

Problem updating master data

Hi all, im having a problem updating master data for an infoobject.
Im not able to upload the data from the data source and im not able either to update it manually.
Im getting this error Field symbol has not yet been assigned
can anybody hekp me?

Ask your Basis team to implement this note in BI system..
Summary
Symptom
GETWA_NOT_ASSIGNED (a field symbol is not yet assigned) occurs when new master data providers are implemented after Note 1089231.
Reason and Prerequisites
This problem is caused by a program error.
This problem only occurs when display attributes are requested and no data is returned.

Problem with Master Data Load

Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022     Re-schedule the master data load process to avoid such situations in future.
u2022     Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
Luis

Dear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2.     Follow instructions from OSS 632931 (tcode RSRV)
3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis

Problem with master data lookup in transformations

Hi,
We're experiencing a strange problem in the transformations for an Error Reporting scenario.
We've the SAP standard customer (0CUSTOMER) in DSO 2 which derives it's value from the navigational attribute of YCUSTNR (0CUSTOMER is the navigational attribute of YCUSTNR) in DSO1. But the problem here is that even when there is no entry for YCUSTNR, the 0CUSTOMER in DSO 2 returns a value.
Referential Integrity check is not employed for this scenario. Is it because of this reason that lack of master data is returning some value held in memory. I'm not sure whether it's an issue with the cache. Is there any work around for solving this problem other than the standard master data look up?
Any help in this issue would be appreciated and rewarded.
Thanks & Regards
Hari

Note 1031553 - Reading master data returns value that does not exist
will solve this problem.
Regards,
József.

Problem in master data loading in BI 7.0

Hi Experts,
I m loading master data in BI 7.0 server.
It is getting failed due to invalid record.
But when i load the same data in 3.5; it is successful.
Can anybody tell me what may be the problem..
Thanks in advance..
Regards,
Ashwin

Hi,
In BI 7.0 we first load data to PSA through Infopacage.Once data comes in PSA table we do transformation between the PSA table which is tied to the datasource and the data target.
Then we load data to the target through DTP.
May be there is some problem in the transformation.Check your mapping in the transformation.
Kindly update me regarding this.
Regards,
Debjani..

Problems in master data upload

Hi all,
What r the problem we will face in master data upload?
Plz explain this as very urgent.
Thanks in advance
Venkat

Hi Venkat,
My suugestion is Before Posting a new Post Please close u r previous threads if u r satisfied...
Then everone will be interested to answer to u r queries..
Regards,
Sridhar

Problem load master data

Hi experts
I am trying to load master data 0MATERIAL ATTR, there is no error when load into PSA but when I did load into IO it shows error as below:
Too many error records - update terminated
Example:
Record 1 :0MATERIAL : Data record 1 ('000000020000000001 '): Version '000000020000000001 ' is not valiad RSDMD 194
Please kindly advice if you have any idea how to fix the problem.
Thanks in advance
Angel

Hi Angel,
There might be a problem in data from source system. Check the tech spec of the info object like type length etc.in BW. then check with the data in PSA.
Hope this will help.
Assign Points if helpful
Regards,
Ramesh

DTP problem on master data loading

Dear Experts
       When we loading 0Employee master data daily, sometime PSA data can not reflect to master table
     For example, data in PSA as following
10001    01/01/2008     01/31/2008    C1
10001    02/01/2008     08/31/2008    C1
10001    09/01/2008     12/31/9999    C2
     After DTP request success running, the data as following
10001    01/01/2008     01/31/2008    C1
10001    02/01/2008     08/31/2008    C1
10001    09/01/2008     12/31/9999    C1
    the C2 in PSA can not update to master table, this problem happened time to time, but it hardly find it until users' complain.
    When I manually deleted DTP request from Master attribute list and re-load from PSA to master table, the problem can be fixed.
    By the way, I have already set DTP Semantic Groups as Employee ID.
     Anyone can advice it, thanks in advance.
Regards
Jie

jie miao,
Previous master data already available in BW. every day load you need to load only changes. So last record is enough.
Eg:
Initial load on 01-01-2008
10001 01/01/2008 12/31/9999 C1
--> Data loaded on 2nd Jan and above data available in bw.
on 03-11-2008 you will get following records
10001 01/01/2008 11/02/2008 C1
10001 09/01/2008 12/31/9999 C2
Load these records on 03 Nov, so system updates accordingly.
Hope it Helps
Srini

Problem in Master Data and Master Data Lines

Hi All
I'm facing a big problem...I have a UDO with object type as Master.....As master table and master data line table has code field in common the value for this column should be same....but the problem arises here...it happenes that when i enter the data Code field of master data table has different value from code field of master data lines...
Any one can please help........
Thanks

Hi Pati,
After posting the message did you get a delivery confirmation reply? If not, you need to open a new message saying you have yet to get a answer for your previous message (and state the previous message number).
Then sill you get no answer, you need to get in contact with your SAP Business Partner (if you're a customer) or your Channel Partner (if your a SAP Business Partner).
Regards,
Vítor Vieira

SID problem in Master data

Hi All,
I have deleted Master Data records from the table and SID also deleted from SID table.But now my report giveing error message SID are missing from Master data object.
How i can resolve this issue..
another Issue : I have deleted the 4 records form Master table and SID table but that records are appearing in report ?
Regards
srinivas

Hi,
Issue 1. Run th program RSDMD_CHECKPRG_ALL in SE38. Give the master data name and execute.
Issue 2. After deleting the records try to run the attribute change run for that object once and try. If they are still appearing in the reports means they are already there in the aggregates. If you dont want those records not to appear in the report, you have to delete that request and reload the data and activate the aggregates.
Regards,
Jack

Authorization problem regarding master data

Hello,
we have got a role with very restricted authorizations.
A user with this role can't start the BEx tools for example but it should be possible for him to see queries in the portal. That works fine for normal queries based on normal InfoCubes, DSOs and with hierarchies. But we have got one query that is based on master data (0mat_sales) - if the user wants to see this query he gets a message"You do not have the authorization for component <name of the query>".
I added object class S_RS_IOMAD but it didn't help. I also made some tests with changes on S_RS_ICUBE and S_RS_IOBJ but it also didn't help.
Has anybody an idea which authorization object class to use or how to configure this?
Greetings & Thanks a lot
Bettina

Hello,
here's the solution:
I traced the steps of the user for executing this query based on master data by transaction ST01.
The following authorization has to be given:
S_RS_COMP
Activity:Execute
Info Area: <InfoArea where the master data can be found>
InfoCube: 0* <or other names for own master data objects>
Name of reporting component: <name of the query>
Type of reporting component: Query
Greetings
Bettina

Problem deleting Master Data from an InfoObject

Hello Everyone,
We have 0MATERIAL infoobject. There was no Master data in the infoobject. Then, i manually entered the data into the InfoObject. After a day, i tried to delete the Master data to load it from R/3. When i tried to delete the Master data from the InfoObject, it shows errors and does not allow me to delete the data. Say, i entered 2 into material column of a record, the error appears like 'Master Data 0000002' (SID 25) is being used in /BI0/DOSH21' and cannot be deleted'. could someone please help me with this. This is a bit urgent. Let me know if you need more information.
Thanks.

Hi Sachin:
Your only hope is if R/3 has the Correct Master Data, it will overwrite your Master Data. But remember for this, the KEYS have to be same because the KEYS can never be deleted in your case.
E.g., MATERIAL, LOC (is an attribute)
You inserted:
000000002, TEXAS
If, in R/3 there is infact a material with key 000000002, FLORIDA. THis will overwrite your Record.
If R/3 doesn't have 000000002, there is not much you can do now.
Ram Chamarty

Master data exraction problem

Hi,
I am facing some problem in master data uploading into BW. The details as follows. I am trying for 0Customer & 0Materials. I have checked system connection R/3 to BW is ok
The Errror in Monitore screen
Requests (Messages) everything is ok.
Messages : Missing Messages
Transfer IDoc and TRFC : Error Occured
Application documents Not posted
Could any one help me to resolve this problem. I'll give you full pints

Hi Roberto,
Thanx for ur reply, I have checked source system in RSA1, It shows everything is OK.
I dont have authorization of ST22, So I m not able to find any ABAP dump. But I dont think this dump will be there....
Thanx
Manoj

Master data 0PLANT_ATTR problem

Hi BW Experts,
   I have one problem with master data 0PLANT_ATTR.
   This is running daily in the process chain.
   But iam facing problem with 0PLANT_ATTR. It gives an error daily. We could not solve this problem till now.
The error message is:
Record 9 :Plant 1008 : No sales organization found; Local currency cannot be checked
Record 14 :Plant 1013 : No sales organization found; Local currency cannot be checked
Record 17 :Plant 1016 : No sales organization found; Local currency cannot be checked
Record 18 :Plant 1017 : No sales organization found; Local currency cannot be checked
Record 19 :Plant 1018 : No sales organization found; Local currency cannot be checked
But previous, the data was coming fine. From 15 days onwards it gives an error.
For all plants we are not maintaining sales organization. How it is possible?
Pls can anyone tell me the process .
Thanks in advance
Regards,
Anjali

Re: 0plant_atrr extraction
Posted: Jul 9, 2007 10:21 AM    in response to: pinky reddy         Reply      E-mail this post
Hi,
refer the links:
https://forums.sdn.sap.com/click.jspa?searchID=219240&messageID=972275
https://forums.sdn.sap.com/click.jspa?searchID=219240&messageID=942303
Re: Yellow Error when loading data attached to InfoSource 0PLANT_ATTR
With rgds,
Anil Kumar Sharma .P

Webi error for master data attributes if universe is on top of BI query

Hi All,
We are using BO XI R2 SP5 integrated with SAP BI 7.0.
We have built a universe on top of a BI query and when we try to build a web intelligence report that includes master data attributes like Customer City,Customer Region etc BO throws the following error:
Error 1:
Database error: [SOFA Driver] : Error getting members for hierarchy (level=ZFI_I03/ZFI_I03_Q0003, member=[ZFI_I03___F172], opcode=[ZFI_I03___F172]) . System error in program CL_RSDM_READ_MASTER_DATA and form VALUEREAD-02- (see long text). Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
For a universe built on a different BI query with master data attributes mentioned above,a different error occuring.
Error 2:
Your Web Intelligence session has timed out. Log out and log in again to InfoView. (Error: WIJ 77778)
We have tried:
1) We have executed the function module BAPI_MDPROVIDER_GET_DIMENSIONS with necessary inputs query/cube and we got correct output, like members, optional properties, selected properties and restrictions.But, still our problem remains same.
2) Transaction u201CRSRTu201D and executed the query,transaction RSRV to check SID-tables and the related masterdata.
Above steps we performed in response to SAP tickets 541052 / 2009,541131 / 2009 based on logs generated,but still the error persists.
What is working:
If a universe is built on top af an infocube directly, then there is no problem with master data attributes in webi report.
Please let us know if you need more details to help us resolve this issue.

Hi Naresh,
based on the MDX you can identify that those are navigational attributes and thats why the issue is not happening when talking to the cube directly because when you connect to the cube directly the navigational attributes are not available.
Take a look at note : 996197
not sure if it will solve the problem because there are other notes when you search for the error message but this was most of the times the one that resolved the issue.
the issue is in the BAPI functions
Ingo

Problem in master data

Similar Messages

Maybe you are looking for