Problem in material master LSMW - Classification view

Hello all,
I have created LSMW for material master upload with standard input method. Material is getting created thr's this, but 'classification view' is not getting created only for some material groups. Functional consultant is saying that there is no such configuration exists in system regarding material groups.
Plz advice how to resolve this?.
Regards,
Aparna Gaikwad

I giveup now
You close my all doors by saying "All views r needed".
Now i would suggest if any help you can take
Expert Forums » SAP Solutions » ERP - Logistics Materials Management (MM)
There definatly you would be able to find some alternate solution.
Cheers
Amit.

Similar Messages

Problem with Addition of z field in Standard Material master LSMW

Hi All,
We have added couple of zfields in material master MARC table also in BMMH1 Structure for lsmw and it is working fine if we go into MM01/MM02 transaction and enter value in Zfields it is getting updated into Marc table.But it is not working when we load through Standard material master lsmw RMDATIND.
We ran RMDATING program also we regenerated the RMDATIND program.Still it is not working.
Anything else need to be done?Any input would be greatful.
Thanks
Raj.

Any input on this?
Thanks
Raj.

Problem loading material master (IS Mill) data from ECC to BI

Hi Gurus,
We have a problem loading Material master data from ECC to BI 7.0 SP 18.
The scenario is :
The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
That is data element MATNR has 18 chars and its output length is 40 chars.
When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
OMSL setting shows length as 40.
When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
Till here no problem.
On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
OMSL setting cannot be set more than 18.
Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
Diagnosis
Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
I did search for SAP note related to this... but could not find any.
There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
Requesting you all experts for help.
Best Regards,
Deepak

Hi,
follow bellow steps:
1. you need to activate the Datasouce in BI side.
Goto RSA1> Datasource> Select Datasource> Double click> Check fileds and Activate.
2. Replicate the Datasource into BI side.
3. Check the RFC connections by useing SM59.
Regards.

Material Master Data purchasing view

Hi, All,
I have question on material master data purchasing view. There are 2 indicators.
One is 'automatical purchase order', what effect if I tick this box? Another is 'Source List', what effect if I tick this box?
Thanks for your answer in advance

Defines that purchase orders are generated automatically when purchase requsisitions are converted into purchase orders.
Use
If this indicator is flagged, the system does not display the purchase orders on the screen before they are saved.
Dependencies
In the master record for the vendor with whom the material is ordered, the field "Automatic purchase order" must be flagged in the control data for the purchasing data.
If the source list is ticked, system expects a source list for the material with a vendor and it will not allow to create PO giving a error message,source not included despite of source list requirement if it is not created.
Regards,

Problem creating Material Master sales view with LSMW

Hello experts,
I have created a LSMW that uses the direct input program RMDATIND to create new material master records. These materials have different material types.
I require fields from different views like Purchasing, Sales, MRP and accounting, among others. But not all the material types have all the view defined. I will like, if it's possible, use the same LSMW program to upload all the materials.
The problem that I'm having if once I ran the program, I got the warning message "The data for the maintenance statuses V cannot be transferred", message no. MG161, and even the material is created the sales view is it not. I check all the sales data in my CSV file and looks good.
I'm also having in some records, the warning message "The data for the maintenance statuses BG cannot be transferred". That indicate problems with the accounting view.
As an extra information, I'm using the following structures BMM00, BMMH1, BMMH2, BMMH5 and BMMH7.
Hope you can help me to solve this issue.
Regards,
Mairo.

>
> I'm also having in some records, the warning message "The data for the maintenance statuses BG cannot be transferred". That indicate problems with the accounting view.
Each material type has its own set of views, e.g. a FERT has sales views but no pruchasing view, a ROH has purchasing view but no sales view, a NLAG has no storage views and a UNBW no accounting views.
This is defined in customizing of attributs of a material type.
Because of this you have to make sure that you do not transfer sales data for a material type that does not have sales views.
Which views you actually want to create is defined in field PSTAT. Each character stands for a certain view (defined in table T132)
re:The data for the maintenance statuses BG cannot be transferred
Are your matrials split valuated?
if you want create accoutning data in MBEW table with MBEW-PSTAT having BG status, then you have to make sure that MARA and MARC PSTAT field also has the B and G .

Problem in material master upload using LSMW

Dear All
I am trying to upload material master using LSMW (batch input recording).
I am facing problem while doing 14 step (Run Batch Input Session). When i'm running the batch input session, on the Create Material (Initial Screen), system picks values for material code, industry sector & material type but gives error message "select at least one view". system is not allowing me select the views which i selected while recording. system allows me to select all the view which i don't want.
why system is asking me to select the views and also how to select the required view?
thanks
manoj gupta

thanks charu
do i need to do complete LSMW steps fpr all the view separately? if i do LSMW for basic view1, for other view do i need to go for change TCode or create T Code?
thanks
manoj gupta

Problems in Material Master Upload by LSMW

Dear Experts,
The question was asked to me in interview, What Problems you face while uploading your material master data by LSMW ?
Please give me some information on this question.
Thanks in Advance

hi,
Check the link it would be usefull:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c5/213c487a3c11d3bc8100105a6588b2/frameset.htm
Hope it helps...
Regards
Priyanka.P

Problem in material master

How to change the group currency price unit in accounting view of material masters(MM01).Currently i am using BAPI_MATERIAL_SAVEDATA to create/update material master views.But there is no field in this BAPI to update the group currency price unit..please help..

hui,
its better for u do it with LSMW, which will allow u to do it quickly also.
use BATCH INPUT method.

Material Master - Sub Classification

Hi Friends
My client has a problem in inventory matching. To avoid this, business wants some of their steel Materials to be sub classified according to the batch/Coil No.
Suppose we have a material with material no. X ( Specifications HA3PO 200 X 6). This material is supplied by a vendor under different Batch/ Foil NO.
These batch / Foil NO. are defined as per the length and width of the coil. Now the business wants to include the batch/Foil No. as sub category of the material.
They are at present marinating the info in an excel sheet and they are facing problem in matching inventory to the SAP system. To get rid of this they need a solution.
How do we map this and where should we do? I'm not a MM conslt, but need to help the business quickly.
Your help will be highly appreciated.
Thanks

Hi,
It is suggested to use concept of Split Valuation for this so that you will get proper tracking of Quantity as well as value of stock.
I will explain this with an example, For e.g. valuation criteria is SUBCLASS
Go to OMWC - Configure Split Valuation
Here Create Valuation Category as for e.g. "SUBCLASS" and Valuation Types as "FOIL NO 1" and "FOIL NO 2"
Here in Valuation types, you can assign the Account Category Reference
And in OMSK - You can define 2 Valuation classes and assign these to 2 Account Category References
Now in OBYC - Maintain Account Determination for Account Key BSX as per the valuation class
Refer following link for detailed configuration of Split Valuation
[Split Valuation Process|http://www.sap123.com/showthread.php?t=29]
[Split Valuation Help|http://help.sap.com/saphelp_erp60_sp/helpdata/en/8f/d1de34e4cb2300e10000009b38f83b/frameset.htm]
Process Flow: -
1. Create Material Master for Asset in MM01, maintain valuation category ORIGIN in "Accounting 1" view and extend the material master for all the above 2 valuation types and input the value.
Here in your case Valuation Types will be "FOIL NO 1" and "FOIL NO 2" and also assign the respective valuation classes.
When you want to Purchase materials then,
1. ME21N - Create for Material with valuation type "FOIL NO 1" or "FOIL NO 2" as per requirement, maintain it in "Delivery" Tab
2. MIGO - GR w.r.t. PO (GR of material will be done in valuation type as per maintained in PO "FOIL NO 1" and "FOIL NO 2"
3. MMBE - Stock Overview (Here you can see the stock as per valuation type "FOIL NO 1" and "FOIL NO 2"

MM01 Create New Material Master without Basic view

Hi,
The SAP system allow us to create a new material master Purchasing View only (without Basic views). We execute T-code MM01, select Purchasing view only, enter the purchasing view data and save. Material master created with only the Purchasing view.
We want to control whereby Basic view must be created first before any plant/organisation material views (Sales, purchasing, Accouting etc) can be created. That means user cannot create Purchasing view ONLY if the Basic views is not created, can this be done??
best regards,

Hi,
For most of the standard SAP material types the basic data 1 view is configured as mandatory, but that can be turned off in the configuration. The first place I would look would be in SPRO under 'Logistics - General -> Material Master -> Basic Settings -> Material Types -> Define Attributes of material types'. In this transaction, highlight the material type being used and click on the magnifying glass. The section 'User departments' shows what views can be created for a material. You need to check 'Basic Data' is selected here.
If that isn't the problem, then I would suggest that you look at the screen sequence and also the field selection configuration for the material type, which you can find under 'Logistics - General -> Material Master -> Configuring the Material Master'. This configuration dictates what fields are shown on the material master and the status of each field, i.e. whether it is mandatory or not.

Material master -lsmw

Hi ,
I am using Direct input program to update and change material master by using program RMDATIND.I have to update MRP,Purchasing,Storage,work scheduling,QM views and changing sales,plant views.I didnt find the fields belongs to QM view in the standard structures of Directinpt. Remaining all fields from all the views are mapped. Can any body suggest the way , so that i can include the QM view fields . They are ART(Inspection type), MPDAV(AVg.Inspection duration), QATV (Inspection set up)....
Regards,
Rajesh.

Hi Rajesh,
I think its better for you if u go with Recording method for ur requirement. Because, I presume that standard programming is not handling it. Even, BAPI method also is not handling the Inspection type and duration.
Note:
Please don't forget to Reward points if the solution is helpful

Problem in Material master creation

when iam creating material master, in sales view1 maintained Tax claassification. After saving the master record the Tax classification is disappearing.
could any one know the solution? please help me.

Hi Preveen,
Use the following path in Customizing for Sales:
    -> Functions -> Taxes -> Tax by country
If sequence value 0 is defined for a country, change it to 1.
If other tax categories are defined for the same country, increase the sequence value for all tax categories of this country by 1.
Important: If materials exist for which tax data has already been maintained in the country in question, this tax data must be checked and, where necessary, modified using the "Change material" function. (Note that tax data is saved in table                MLAN for each material and country.)
Regards,
Mauro

Reg:Material Master Foriegn Trade view Update

Hai All,
I need to update the Material Master (mm02) transaction
In that foriegn trade view i need to update .
Is there any BAPI or Function module or any standard program is there?
Could you please help me out?
I need to update the Custon Tariff Prefe. In Foriegn trade view.
Please help me out.
Thanks & Regards,
S.Chaitanya.

Hi Chaitanya,
There is no separate function module tro only change the foreign trade information but the generic function module is
BAPI_MATERIAL_SAVEDATA
Regards,
Ravi

Send material master with classifications (ALE)

Hi,
I want to send material master data with its classifications. I am using transaction 'BD10' to send materials. I understood that in order to send the classifications I have to check the ckeckbox 'Send material in full' - I did it, and there are no classifications in the IDoc.
please advise,
Thanks, Nir.

You can use change pointer mechanism. This is nothing but, when you change a material SAP Coded in such a way, if that specific field is marked for Change Document then an entry can be entered in TBDCP table.
(you can find this by going to SE11 put the table name MARA, display the table. Specific field like MATNR double click on the data element and go to Further Characteristics tab, there you can see whether it is marked for change document or not)
After this, you have to activate the change pointers for the system using BD50 transaction.
Then in transaction BD52 you have to maintain what fields are relavent for the change pointers in the IDoc. This is the deciding factor. If your IDoc field is mentioned in this table, then whenever a material is created or changed SAP will make an entry into TBDCP table.
Then you have to run BD21 transaction as a batch job for that specific message type to pick up the changes and create idocs. (That means BD21 program will select the data from TBDCP table and creates IDocs)
CHANGE POINTERS IS A BATCH PROCESS.
regards
SKM

Problem in Material master sales text update

Hi,
I have make the LSMW for uploading material master sales text update by using standad batch / direct input object 001 program /SAPDMC/SAP_LSMW_IMPORT_TEXTS but as the formate of NAME required is as below
Materila code 18 Char SALES ORG 4 CHAR DIS. CHANNEL 2 CHAR total 24 char but in our system some material code is only 6 CHAR e.g ABCXYZ now when we pass the value for name
ABCXYZ SORGDC , it works OK we have to add blank spaces between material code asnd sales organuization so that total lenght of material should be 18 char so is there any option for this insted of addin gblank spaces because for each material code lenght is diffrent due to external number range .
regards,
zafar
Moderator Message: Search before you post. If you fail to get an answer, type a question, spell-check it and post it here.
Edited by: kishan P on Feb 16, 2011 4:47 PM

from http://help.sap.com/saphelp_erp2005/helpdata/en/f4/b49e8c453611d189710000e8322d00/content.htm
Text Entry Area
Type your text into the text entry lines. You can type continuously: SAPscript fills your text using a line length of 72 characters as soon as you choose ENTER or a function.
To enter text in the line editor continuously, the checkbox Automatic tab at field end must be marked. For more information on setting automatic tabbing, see Setting Automatic Tabbing and Entering Text.
Note that the line editoru2019s text filling has no influence on the final appearance of the text. Your text is formatted no earlier than at the time it is displayed or printed. For more information, see Previewing and Printing SAPscript Documents.

Problem in material master LSMW - Classification view

Similar Messages

Maybe you are looking for