Problem in MCI7 - PMIS: Breakdown Analysis .

Dear Expert ,
Pl help in above report analysis. I had feed more than 20 notification of breakdown by selecting breakdown tick in notification with differend date . but No data exists for chosen selection massage come. Even I selecting Daily in OMOS for S070. The MTTR/ MTBF come when I feed MCJB.
Thanks in advance.
Avi.

Dear Sir ,
Thanks for prompt reply.
I checked that Update group is 26 & Infor structure shows status Active. Now I will take care  for change the Split period , I selected it D with Updating as a Asychronous  updating (2 ).
But still prob not solved . I saw all notification are TACO with Breakdown tick selected .
Pl help in more details.
Avi

Similar Messages

  • Breakdown analysis report MCI7

    Dear Experts,
    I created a break down notification for an equipment installed under a functional location and completed the notification after entering the breakdown hours with breakdown indicator checked.  Now if i run the MCI7 report with the functional location of the equipment, it does not give a break down analysis. Is it the way it usually responds or there are some additional settings we need to do?
    Please let me know
    Thanks,
    Boby

    Please ensure that the 'Startup date' field in the Equipment Master (Header tab) is filled. When there is only one Breakdown notification on a particular equipment and the 'startup date' is not filled, you will not get MCI7 report, because the first notification will be consumed as the 'startup date'. As soon as you fill this field, the MCI7 report starts, even if this only notification is created/completed before filling the field.
    Further you may go through the thread below:
    [MCI7|Re: Breakdown reports]
    Regards
    Jogeswara Rao

  • Weekly Breakdown Analysis

    Dear All,
    We have MCI7 report where we can have monthly breakdown analysis but here my requirement is, I want to have report on Weekly Breakdown analysis.
    To get the Weekly Breakdown analysis we can change the update period for info structure S070 to Week.
    But in SAP note 80311 it has mentioned that "The update period for the information structure S070 must be 'Month'.Changing the update period is not allowed."
    Now my question is, is it advisable to change the update period?
    If not, then why there is field (SPWOC) for week in the table S070?
    Request you to kindly clarify my doubts.
    Regards,
    Basavaraj.

    there is set to date button next to execute button...try dat...here u can specify the date upto which u want to run the progress analysis

  • BREAKDOWN ANALYSIS V/S MTTR-MTBR ANALYSIS

    Dear Friends,
    I want to know what is the difference between MTTR-MTBR analysis and Breakdown analysis?
    T-code for Breakdown Analysis is MCI7 in Standard analysis but this shows the MTTR-MTBR Analysis then if this is the MTTR-MTBR Analysis, then how can we find out the actual breakdown analysis from sap?
    Thanks in advance

    HI,
    Suppose take an equipment  K3001 -compressor
    It fails 2 times this month.
    Then Breakdown is 2.
    MTBF -  is Mean time between failure
    The running hour between these two breakdown is MTBF  For ex:  150 hr
    MTTR - is Mean time to repair.
    After Breakdown the time you take to repair and make it operable  is MTTR  for ex: 8 hr
    MCJB  &  MCJC   - MTTR  -MTBF  report

  • Breakdown analysis

    Hello everyone in plant maintenance report i am not able to get breakdown analysis report. Kindly suggest me is there any config part i m missing.
    Regards
    Abhishek

    Dear,
    Hope the links below should be helpful
    Breakdown Analysis Report in PM
    Breakdown Analysis MCI7 report
    Regards
    Alfred

  • Problem in Multisim with transient analysis and initial conditions

    Hello everyone,
    I have a problem in multisim with transient analysis and initial conditions.
    If I do transient analysis with automatically determined initial conditions the circuits works.
    If I do transient analysis with user-defined initial conditions the circuits works in cases.
    --Working with user-defined---
    *## Multisim Component V2 ##*
    vV2 3 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} 3)
    *## Multisim Component R1 ##*
    rR1 3 0 10000 vresR1
    .model vresR1 r( )
    --Working with user-defined----------
    *## Multisim Component V2 ##*
    vV2 1 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} 3)
    *## Multisim Component U1 ##*
    xU1 1 0 MEMRISTOR__MEMS__1__1
    --Not Working with user-defined-------
    *## Multisim Component V2 ##*
    vV2 3 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} -3)
    *## Multisim Component R1 ##*
    rR1 3 1 10000 vresR1
    .model vresR1 r( )
    *## Multisim Component U1 ##*
    xU1 1 0 MEMRISTOR__MEMS__1__1
    The costum component includes something like that:
    .subckt MEMRISTOR__MEMS__1__1 plus minus PARAMS:
    *Parameters values
    +rmin=100 rmax=390 rinit=390 alpha=1E3 beta=0 gamma=0.1 VtR=1.5 VtL=-1.5 yo=0.0001
    +m=82 fo=310 Lo=5
    blah blah ...
    .ends Memristor
    Namely, if I combine the resistor and my custom component in one circuit, transient analysis with user defined initial conditions gives an error (timestep too small).

    Hi  Nik,
    If possible, please post the Multisim file. This way, I can get access to all your settings.
    Tien P.
    National Instruments

  • Breakdown Analysis Vs MTBR/MTTR Analysis

    Hi,
    I have created one equipment. Start date for that is 28.04.2010. After that, I have created 3 breakdown notifications. Based on that, I have created orders & completed fully. Now I am trying to run both the reports like MTBR/MTTR Analysis & Breakdown Analysis.
    Results:
    MTBR/MTTR Analysis:
    Total Breakdowns: 3
    Total Downtime: 62 hours
    MTTR: 20.67 hours
    MTBR: 219.33 hours
    Time between repairs: 658 hours
    Breakdown Analysis:
    Actual Breakdown: 2
    MTTR: 12 hours
    MTBR: 252 Hours
    Why this difference between these 2 analysis. Can you please explain.
    Regards,
    Maheswaran.

    Hi Narasimhan,
    Thank you for prompt reply. I have checked all the dates as well for overlapping. But there is nothing like that.
    This is for your information:
    1st Notification:
    Start Date: 04.05.2010 Start Time: 10.00.00 AM
    End Date: 06.05.2010 End Time: 00.00.00
    2nd Notification:
    Start Date: 15.05.2010 Start Time: 10.00.00 AM
    End Date: 15.05.2010 End Time: 20.00.00
    3rd Notification:
    Start Date: 27.05.2010 Start Time: 10.00.00 AM
    End Date: 28.05.2010 End Time: 00.00.00
    There is no overlapping also. But I dont know why. If there is any overlapping, in MTBR/MTTR analysis as well, result could be same if I am correct.
    Please clarify.
    Regards,
    Maheswaran.

  • MTTR and MTBR (Breakdown analysis report mci7) in PM.

    Hi all,
    this is regarding pm issue.
    in mci7(ie MTTR and MTBR report) iam unable to get the required results for certain equipments.
    ie it is showing very high values.
    please guide me in this regard.
    Regards,
    santosh.

    Dear Maheswaran,
    as per your post iam sending the following information.
    1. What is the start up date?
    Start up date for Equipment 1&2 :  1-4-2006
    Start up date for Equipment 3      :  30-11-2004
    2 Go to IW29, give the input for Breakdown notification type & get the list of notifications. From that, give the number of notifications created, breakdown duration for each notification (Check for Breakdown check box in those notifications & give that particular number)
    In IW29 i found following
    NOCO Status 6 nos
    OSNO status 1 no
    NOPR status 6 nos
    Breakdown duration is as follows
    NOCO--1.42h
    NOCO--0.13h
    NOCO-- 1h
    NOPR-- 2h
    NOCO-- 0.81h
    NOPR--  0.82h
    NOCO-- 0.87h
    NOCO-- 1.05h
    3) in mci7 i used to give date as 09.2010 to 07.2011
    4) in mci7 i used to give date and equipment no as input.
    pleae guide me in this regard.
    Regards,
    santosh.

  • Date wise breakdown analysis

    Dear all,
    In MCI4, MCI5 ,MCI7 we can not select specified date to check analysis (only month option is available). Please advice is there any other way to find day wise analysis or need to develop the  Z repot.
    Many Thanks
    Yogesh

    Dear,
    What kind of analysis you want to do against the breakdown down ?
    Can you explain more ?
    Because In MTBF MTTR you can get on hourly basis also you can get analysis as per catalog codes through IW69 etc.cost you can get from iw 39
    AM

  • Problem with Data Model and Analysis View

    I create an analyze in BI Publisher and then i create a data model using this object.
    When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
    So i was check the analysis and all looks appears to be fine,  In the results tab it show me a complete table with the data i was looking to use.
    So i try to repeat the error and when  i try to create the XML for the Data Model i found this two error in the logs:
    [root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
            at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
            at java.lang.Throwable.<init>(Throwable.java:196)
            at java.lang.Exception.<init>(Exception.java:41)
            at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
            at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
            at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
            at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
            at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
            at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
            at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
            at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
            at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
            at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
            at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
            at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
            at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
            at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
            at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    And when i try to view the report that use the analysis i got this two warning in the logs:
    [2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
    Any ideas about how to solve or debug this?
    Thanks

    I follow your instructions and it works fine. I can create the XML and the reports can show data.
    So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
    Any idea how to debug it?
    Thanks.

  • Problem with the login in analysis

    Hi All,
    I am trying to login to analysis page as an admin user using the credentials of weblogic which i gave during the installation of OBIEE but the login process fails giving an error"Invalid username and Pssword".
    the same credentials when i am providing in em or console the login gets successful. even i have created a new user through console but that user credentials are also not getting validated. in a sense my analysis login page is completely freezed. initially everything was wroking fine but when i saved a rpd using "copy as" and then replaced the old rpd with the same name the problem started.
    even when i am trying to open my current rpd in online mode i get the error of username and paasword but the same rpd opens up in offline mode using same password. Please help me out as i dont know what has happened.

    Hi,
    as far as the sawlog is concerned PFB the entire saw log file.
    i m not able to get out the error from it. Can you please help me out with this and tell the solution.
    Below are the contents of my sawlog.
    [2013-10-13T20:49:17.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T20:49:20.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T20:49:22.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.subsystem.catalog.initialize.upgrade] [ecid: ] [tid: ] Starting to update Account GUIDs[[
    File:initializecatalog.cpp
    Line:1046
    Location:
      saw.subsystem.catalog.initialize.upgrade
      saw.subsystem.catalog.initialize
      saw.subsystems.catalogbootstrapper.loadcatalog
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T20:49:22.000+05:30] [OBIPS] [ERROR:10] [] [saw.subsystem.catalog.initialize.upgrade] [ecid: ] [tid: ] Error reading object: /shared/Sample Lite/KPIs/Revenue KPI
    Element doesn't contain required attribute treatNoDataAs.
    Node: <sawkpi:thresholds xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:sawkpi="com.siebel.analytics.web/kpi/v1" xmlns:saw="com.siebel.analytics.web/report/v1.1" goal="high"><sawkpi:thresholdRange ID="80ecc300-0b96-1000-8567-0ae4eb540000" value="100" assessmentStateKey="OK"><sawkpi:statusText><saw:caption><saw:text>OK</saw:text></saw:caption></sawkpi:statusText><sawkpi:rangeExpression><sawx:expr xsi:type="sawx:comparison" xmlns:sawx="com.siebel.analytics.web/expression/v1.1" op="greater"><sawx:expr xsi:type="sawx:sqlExpression">&quot;Base Facts&quot;.&quot;Revenue&quot;</sawx:expr><sawx:expr xsi:type="sawx:sqlExpression">95</sawx:expr></sawx:expr></sawkpi:rangeExpression><sawkpi:iconScheme color="green" icon="fmap:common/kpi_ok_status.gif"/></sawkpi:thresholdRange><sawkpi:thresholdRange ID="80ecc301-0b96-1000-8567-0ae4eb540000" value="50" assessmentStateKey="WARNING"><sawkpi:statusText><saw:caption><saw:text>WARNING</saw:text></saw:caption></sawkpi:statusText><sawkpi:rangeExpression><sawx:expr xsi:type="sawx:comparison" xmlns:sawx="com.siebel.analytics.web/expression/v1.1" op="greater"><sawx:expr xsi:type="sawx:sqlExpression">&quot;Base Facts&quot;.&quot;Revenue&quot;</sawx:expr><sawx:expr xsi:type="sawx:sqlExpression">50</sawx:expr></sawx:expr></sawkpi:rangeExpression><sawkpi:iconScheme color="yellow" icon="fmap:common/kpi_warning_status.gif"/></sawkpi:thresholdRange><sawkpi:thresholdRange ID="80ecc302-0b96-1000-8567-0ae4eb540000" value="0" assessmentStateKey="CRITICAL"><sawkpi:statusText><saw:caption><saw:text>CRITICAL</saw:text></saw:caption></sawkpi:statusText><sawkpi:rangeExpression><sawx:expr xsi:type="sawx:comparison" xmlns:sawx="com.siebel.analytics.web/expression/v1.1" op="lessOrEqual"><sawx:expr xsi:type="sawx:sqlExpression">&quot;Base Facts&quot;.&quot;Revenue&quot;</sawx:expr><sawx:expr xsi:type="sawx:sqlExpression">50</sawx:expr></sawx:expr></sawkpi:rangeExpression><sawkpi:iconScheme color="red" icon="fmap:common/kpi_critical_status.gif"/></sawkpi:thresholdRange></sawkpi:thresholds>[[
    File:catalogimpl.cpp
    Line:1214
    Location:
      saw.subsystem.catalog.initialize.upgrade
      saw.subsystem.catalog.initialize
      saw.subsystems.catalogbootstrapper.loadcatalog
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T20:49:22.000+05:30] [OBIPS] [ERROR:10] [] [saw.subsystem.catalog.initialize.upgrade] [ecid: ] [tid: ] Error reading object: /shared/Sample Lite/KPIs/Sample KPI
    Element doesn't contain required attribute treatNoDataAs.
    Node: <sawkpi:thresholds xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:sawkpi="com.siebel.analytics.web/kpi/v1" xmlns:saw="com.siebel.analytics.web/report/v1.1" goal="high"><sawkpi:thresholdRange ID="80ecc300-0b96-1000-8567-0ae4eb540000" value="100" assessmentStateKey="OK"><sawkpi:statusText><saw:caption><saw:text>OK</saw:text></saw:caption></sawkpi:statusText><sawkpi:rangeExpression><sawx:expr xsi:type="sawx:comparison" xmlns:sawx="com.siebel.analytics.web/expression/v1.1" op="greater"><sawx:expr xsi:type="sawx:sqlExpression">&quot;Base Facts&quot;.&quot;Revenue&quot;</sawx:expr><sawx:expr xsi:type="sawx:sqlExpression">95</sawx:expr></sawx:expr></sawkpi:rangeExpression><sawkpi:iconScheme color="green" icon="fmap:common/kpi_ok_status.gif"/></sawkpi:thresholdRange><sawkpi:thresholdRange ID="80ecc301-0b96-1000-8567-0ae4eb540000" value="50" assessmentStateKey="WARNING"><sawkpi:statusText><saw:caption><saw:text>WARNING</saw:text></saw:caption></sawkpi:statusText><sawkpi:rangeExpression><sawx:expr xsi:type="sawx:comparison" xmlns:sawx="com.siebel.analytics.web/expression/v1.1" op="greater"><sawx:expr xsi:type="sawx:sqlExpression">&quot;Base Facts&quot;.&quot;Revenue&quot;</sawx:expr><sawx:expr xsi:type="sawx:sqlExpression">50</sawx:expr></sawx:expr></sawkpi:rangeExpression><sawkpi:iconScheme color="yellow" icon="fmap:common/kpi_warning_status.gif"/></sawkpi:thresholdRange><sawkpi:thresholdRange ID="80ecc302-0b96-1000-8567-0ae4eb540000" value="0" assessmentStateKey="CRITICAL"><sawkpi:statusText><saw:caption><saw:text>CRITICAL</saw:text></saw:caption></sawkpi:statusText><sawkpi:rangeExpression><sawx:expr xsi:type="sawx:comparison" xmlns:sawx="com.siebel.analytics.web/expression/v1.1" op="lessOrEqual"><sawx:expr xsi:type="sawx:sqlExpression">&quot;Base Facts&quot;.&quot;Revenue&quot;</sawx:expr><sawx:expr xsi:type="sawx:sqlExpression">50</sawx:expr></sawx:expr></sawkpi:rangeExpression><sawkpi:iconScheme color="red" icon="fmap:common/kpi_critical_status.gif"/></sawkpi:thresholdRange></sawkpi:thresholds>[[
    File:catalogimpl.cpp
    Line:1214
    Location:
      saw.subsystem.catalog.initialize.upgrade
      saw.subsystem.catalog.initialize
      saw.subsystems.catalogbootstrapper.loadcatalog
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T20:49:22.000+05:30] [OBIPS] [ERROR:10] [] [saw.subsystem.catalog.initialize.upgrade] [ecid: ] [tid: ] Error reading object: /shared/Sample Lite/KPIs/Unit Price
    Element doesn't contain required attribute treatNoDataAs.
    Node: <sawkpi:thresholds xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:sawkpi="com.siebel.analytics.web/kpi/v1" xmlns:saw="com.siebel.analytics.web/report/v1.1" goal="high"><sawkpi:thresholdRange ID="81c15110-0b96-1000-8567-0ae4eb540000" value="100" assessmentStateKey="OK"><sawkpi:statusText><saw:caption><saw:text>OK</saw:text></saw:caption></sawkpi:statusText><sawkpi:rangeExpression><sawx:expr xsi:type="sawx:comparison" xmlns:sawx="com.siebel.analytics.web/expression/v1.1" op="greater"><sawx:expr xsi:type="sawx:sqlExpression">&quot;Base Facts&quot;.&quot;Actual Unit Price&quot;</sawx:expr><sawx:expr xsi:type="sawx:sqlExpression">90</sawx:expr></sawx:expr></sawkpi:rangeExpression><sawkpi:iconScheme color="green" icon="fmap:common/kpi_ok_status.gif"/></sawkpi:thresholdRange><sawkpi:thresholdRange ID="81c15111-0b96-1000-8567-0ae4eb540000" value="50" assessmentStateKey="WARNING"><sawkpi:statusText><saw:caption><saw:text>WARNING</saw:text></saw:caption></sawkpi:statusText><sawkpi:rangeExpression><sawx:expr xsi:type="sawx:comparison" xmlns:sawx="com.siebel.analytics.web/expression/v1.1" op="greater"><sawx:expr xsi:type="sawx:sqlExpression">&quot;Base Facts&quot;.&quot;Actual Unit Price&quot;</sawx:expr><sawx:expr xsi:type="sawx:sqlExpression">50</sawx:expr></sawx:expr></sawkpi:rangeExpression><sawkpi:iconScheme color="yellow" icon="fmap:common/kpi_warning_status.gif"/></sawkpi:thresholdRange><sawkpi:thresholdRange ID="81c17820-0b96-1000-8567-0ae4eb540000" value="0" assessmentStateKey="CRITICAL"><sawkpi:statusText><saw:caption><saw:text>CRITICAL</saw:text></saw:caption></sawkpi:statusText><sawkpi:rangeExpression><sawx:expr xsi:type="sawx:comparison" xmlns:sawx="com.siebel.analytics.web/expression/v1.1" op="lessOrEqual"><sawx:expr xsi:type="sawx:sqlExpression">&quot;Base Facts&quot;.&quot;Actual Unit Price&quot;</sawx:expr><sawx:expr xsi:type="sawx:sqlExpression">50</sawx:expr></sawx:expr></sawkpi:rangeExpression><sawkpi:iconScheme color="red" icon="fmap:common/kpi_critical_status.gif"/></sawkpi:thresholdRange></sawkpi:thresholds>[[
    File:catalogimpl.cpp
    Line:1214
    Location:
      saw.subsystem.catalog.initialize.upgrade
      saw.subsystem.catalog.initialize
      saw.subsystems.catalogbootstrapper.loadcatalog
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T20:49:22.000+05:30] [OBIPS] [WARNING:16] [] [saw.catalog.item.properties.set] [ecid: ] [tid: ] Adding property Desc with value Data Source: BIP WS getFolderContent
    [http://localhost:7001/xmlpserver/services/v2/CatalogService?wsdl]
    Parameters: User ID, Password, Folder Path --
    Note: Edit the data set and change host name & port to match the BIP server's host and port in your environment. exceeds an entry's the maximum size soft limit 256. There are 263 bytes in this property for item /shared/Sample Lite/Published Reporting/Data Models/WS getFolderContent DM.xdm.[[
    File:itemimpl.cpp
    Line:1555
    Location:
      saw.catalog.item.properties.set
      saw.catalog.impl.read
      saw.catalog.impl.scour
      saw.subsystem.catalog.initialize.upgrade
      saw.subsystem.catalog.initialize
      saw.subsystems.catalogbootstrapper.loadcatalog
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T20:49:23.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.subsystem.catalog.initialize.upgrade] [ecid: ] [tid: ] Succeeded in updating account GUIDs from back end user population store[[
    File:initializecatalog.cpp
    Line:1131
    Location:
      saw.subsystem.catalog.initialize.upgrade
      saw.subsystem.catalog.initialize
      saw.subsystems.catalogbootstrapper.loadcatalog
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T20:49:36.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T20:51:47.000+05:30] [OBIPS] [WARNING:16] [] [saw.subsystem.security.getMasterSession] [ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-000000000000009b,0:1] [tid: 2268] Server accessed with unsupported UA (Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322))[[
    File:ssdevice.cpp
    Line:1454
    Location:
      saw.subsystem.security.getMasterSession
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-000000000000009b,0:1
    ThreadID: 2268
    [2013-10-13T20:52:07.000+05:30] [OBIPS] [WARNING:16] [] [saw.subsystem.security.getMasterSession] [ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-00000000000000a5,0:1] [tid: 2268] Server accessed with unsupported UA (Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322))[[
    File:ssdevice.cpp
    Line:1454
    Location:
      saw.subsystem.security.getMasterSession
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-00000000000000a5,0:1
    ThreadID: 2268
    [2013-10-13T20:57:21.000+05:30] [OBIPS] [WARNING:16] [] [saw.subsystem.security.getMasterSession] [ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-00000000000000b7,0:1] [tid: 2268] Server accessed with unsupported UA (Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322))[[
    File:ssdevice.cpp
    Line:1454
    Location:
      saw.subsystem.security.getMasterSession
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-00000000000000b7,0:1
    ThreadID: 2268
    [2013-10-13T20:57:27.000+05:30] [OBIPS] [WARNING:16] [] [saw.subsystem.security.getMasterSession] [ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-00000000000000c1,0:1] [tid: 2268] Server accessed with unsupported UA (Mozilla/5.0 (Windows NT 5.1; rv:24.0) Gecko/20100101 Firefox/24.0)[[
    File:ssdevice.cpp
    Line:1454
    Location:
      saw.subsystem.security.getMasterSession
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-00000000000000c1,0:1
    ThreadID: 2268
    [2013-10-13T20:57:41.000+05:30] [OBIPS] [WARNING:16] [] [saw.subsystem.security.getMasterSession] [ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-00000000000000d1,0:1] [tid: 2268] Server accessed with unsupported UA (Mozilla/5.0 (Windows NT 5.1; rv:24.0) Gecko/20100101 Firefox/24.0)[[
    File:ssdevice.cpp
    Line:1454
    Location:
      saw.subsystem.security.getMasterSession
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-00000000000000d1,0:1
    ThreadID: 2268
    [2013-10-13T21:02:19.000+05:30] [OBIPS] [WARNING:16] [] [saw.subsystem.security.getMasterSession] [ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-00000000000000dc,0:1] [tid: 2268] Server accessed with unsupported UA (Mozilla/5.0 (Windows NT 5.1; rv:24.0) Gecko/20100101 Firefox/24.0)[[
    File:ssdevice.cpp
    Line:1454
    Location:
      saw.subsystem.security.getMasterSession
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:36b3c0f2:141b22c45a1:-8000-00000000000000dc,0:1
    ThreadID: 2268
    [2013-10-13T21:15:13.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T21:15:14.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T21:15:21.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T21:15:41.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.securitysubsystem.session.logon] [ecid: 585eecf65d051a4f:-1b61c7d:141b27ba80a:-8000-0000000000000894,0:1:1] [tid: 4020] User weblogic logged in (session ID: 0ohicbclpat90s0amqt8u2as2nhsd0ftcrrl0bi  ). [[
    File:masterclientsession.cpp
    Line:366
    Location:
      saw.securitysubsystem.session.logon
      saw.securitysubsystem.checkauthentication.runimpl
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:-1b61c7d:141b27ba80a:-8000-0000000000000894,0:1:1
    ThreadID: 4020
    [2013-10-13T21:15:42.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.security.userpopulationcache.getparentapproles] [ecid: 585eecf65d051a4f:-1b61c7d:141b27ba80a:-8000-000000000000089a,0:1] [tid: 3808] Populating application role hierarchy for the first time.[[
    File:userpopulationcache.cpp
    Line:202
    Location:
      saw.security.userpopulationcache.getparentapproles
      saw.security.securityimpl.getPermissions
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: 0ohicbclpat90s0amqt8u2as2nhsd0ftcrrl0bi
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=weblogic|User=weblogic
    ecid: 585eecf65d051a4f:-1b61c7d:141b27ba80a:-8000-000000000000089a,0:1
    ThreadID: 3808
    HttpCommand: bieehome
    RemoteIP: 169.254.25.129
    HttpArgs: icharset='windows-1252',startPage='1'
    [2013-10-13T21:15:42.000+05:30] [OBIPS] [WARNING:16] [] [saw.catalog.item.properties.set] [ecid: 585eecf65d051a4f:-1b61c7d:141b27ba80a:-8000-000000000000089a,0:1] [tid: 3808] Adding property Desc with value Data Source: BIP WS getFolderContent
    [http://localhost:7001/xmlpserver/services/v2/CatalogService?wsdl]
    Parameters: User ID, Password, Folder Path --
    Note: Edit the data set and change host name & port to match the BIP server's host and port in your environment. exceeds an entry's the maximum size soft limit 256. There are 263 bytes in this property for item /shared/Sample Lite/Published Reporting/Data Models/WS getFolderContent DM.xdm.[[
    File:itemimpl.cpp
    Line:1555
    Location:
      saw.catalog.item.properties.set
      saw.catalog.impl.read
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: 0ohicbclpat90s0amqt8u2as2nhsd0ftcrrl0bi
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=weblogic|User=weblogic
    ecid: 585eecf65d051a4f:-1b61c7d:141b27ba80a:-8000-000000000000089a,0:1
    ThreadID: 3808
    HttpCommand: bieehome
    RemoteIP: 169.254.25.129
    [2013-10-13T21:22:07.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iHnU5hIsp3FCw70FyWMF0000S4000006,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iHnU5hIsp3FCw70FyWMF0000S4000006,0
    [2013-10-13T21:22:07.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iHnU5hIsp3FCw70FyWMF0000S4000006,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
    File:sawserver.cpp
    Line:712
    Location:
      saw.sawserver
      saw.sawserver.terminatesawserver
      saw.sawserver
    ecid: 00iHnU5hIsp3FCw70FyWMF0000S4000006,0
    [2013-10-13T21:25:49.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T21:25:50.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T21:25:55.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T21:29:53.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.securitysubsystem.session.logon] [ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-0000000000000f5a,0:1:1] [tid: 1948] User ukumar46 logged in (session ID: pr7cdripddh1k94k1ortpvbk27sis4j0uqm6kl2  ). [[
    File:masterclientsession.cpp
    Line:366
    Location:
      saw.securitysubsystem.session.logon
      saw.securitysubsystem.checkauthentication.runimpl
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-0000000000000f5a,0:1:1
    ThreadID: 1948
    [2013-10-13T21:29:58.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.security.userpopulationcache.getparentapproles] [ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-0000000000000f5e,0:1] [tid: 224] Populating application role hierarchy for the first time.[[
    File:userpopulationcache.cpp
    Line:202
    Location:
      saw.security.userpopulationcache.getparentapproles
      saw.security.securityimpl.getPermissions
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: pr7cdripddh1k94k1ortpvbk27sis4j0uqm6kl2
    AuthProps: 
    ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-0000000000000f5e,0:1
    ThreadID: 224
    HttpCommand: bieehome
    RemoteIP: 169.254.25.129
    HttpArgs: icharset='windows-1252',startPage='1'
    [2013-10-13T23:53:49.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iHnUfYKGj3FCw70FyWMF0000kS000003,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iHnUfYKGj3FCw70FyWMF0000kS000003,0
    [2013-10-13T23:53:49.000+05:30] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 00iHnUfYKGj3FCw70FyWMF0000kS000003,0:4] [tid: 1372] Failed to restore ctx from reference[[
    File:executioncontext.cpp
    Line:286
    Location:
      saw.dms.conext.unwrap
      saw.threadpool
      saw.threads
    ecid: 00iHnUfYKGj3FCw70FyWMF0000kS000003,0:4
    ThreadID: 1372
    [2013-10-13T23:53:49.000+05:30] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 00iHnUfYKGj3FCw70FyWMF0000kS000003,0:89] [tid: 2352] Failed to restore ctx from reference[[
    File:executioncontext.cpp
    Line:286
    Location:
      saw.dms.conext.unwrap
      saw.threadpool
      saw.threads
    ecid: 00iHnUfYKGj3FCw70FyWMF0000kS000003,0:89
    ThreadID: 2352
    [2013-10-13T23:53:49.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iHnUfYKGj3FCw70FyWMF0000kS000003,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
    File:sawserver.cpp
    Line:712
    Location:
      saw.sawserver
      saw.sawserver.terminatesawserver
      saw.sawserver
    ecid: 00iHnUfYKGj3FCw70FyWMF0000kS000003,0
    [2013-10-13T23:54:50.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T23:54:51.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T23:54:55.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-13T23:55:46.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.securitysubsystem.session.logon] [ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-000000000000118a,0:1:1] [tid: 6116] User weblogic logged in (session ID: tgousq2n96gqge2gsgg12a0n6sqpcr0hn64tnoi  ). [[
    File:masterclientsession.cpp
    Line:366
    Location:
      saw.securitysubsystem.session.logon
      saw.securitysubsystem.checkauthentication.runimpl
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-000000000000118a,0:1:1
    ThreadID: 6116
    [2013-10-13T23:55:50.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.security.userpopulationcache.getparentapproles] [ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-000000000000118e,0:1] [tid: 4900] Populating application role hierarchy for the first time.[[
    File:userpopulationcache.cpp
    Line:202
    Location:
      saw.security.userpopulationcache.getparentapproles
      saw.security.securityimpl.getPermissions
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: tgousq2n96gqge2gsgg12a0n6sqpcr0hn64tnoi
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=weblogic|User=weblogic
    ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-000000000000118e,0:1
    ThreadID: 4900
    HttpCommand: BIEEHome
    RemoteIP: 169.254.25.129
    HttpArgs: icharset='windows-1252',startPage='1'
    [2013-10-13T23:55:50.000+05:30] [OBIPS] [WARNING:16] [] [saw.catalog.item.properties.set] [ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-000000000000118e,0:1] [tid: 4900] Adding property Desc with value Data Source: BIP WS getFolderContent
    [http://localhost:7001/xmlpserver/services/v2/CatalogService?wsdl]
    Parameters: User ID, Password, Folder Path --
    Note: Edit the data set and change host name & port to match the BIP server's host and port in your environment. exceeds an entry's the maximum size soft limit 256. There are 263 bytes in this property for item /shared/Sample Lite/Published Reporting/Data Models/WS getFolderContent DM.xdm.[[
    File:itemimpl.cpp
    Line:1555
    Location:
      saw.catalog.item.properties.set
      saw.catalog.impl.read
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: tgousq2n96gqge2gsgg12a0n6sqpcr0hn64tnoi
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=weblogic|User=weblogic
    ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-000000000000118e,0:1
    ThreadID: 4900
    HttpCommand: BIEEHome
    RemoteIP: 169.254.25.129
    [2013-10-13T23:57:35.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.securitysubsystem.session.logoff] [ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-00000000000011f6,0:1] [tid: 4900] User weblogic logged out (session ID: tgousq2n96gqge2gsgg12a0n6sqpcr0hn64tnoi ).[[
    File:masterclientsession.cpp
    Line:462
    Location:
      saw.securitysubsystem.session.logoff
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: tgousq2n96gqge2gsgg12a0n6sqpcr0hn64tnoi
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=weblogic|User=weblogic
    ecid: 585eecf65d051a4f:-1aa73405:141b2858e09:-8000-00000000000011f6,0:1
    ThreadID: 4900
    HttpCommand: Logoff
    RemoteIP: 169.254.25.129
    HttpArgs: 
    [2013-10-13T23:58:32.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iHnb0P2Uj3FCw70FyWMF0001B4000003,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iHnb0P2Uj3FCw70FyWMF0001B4000003,0
    [2013-10-13T23:58:32.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iHnb0P2Uj3FCw70FyWMF0001B4000003,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
    File:sawserver.cpp
    Line:712
    Location:
      saw.sawserver
      saw.sawserver.terminatesawserver
      saw.sawserver
    ecid: 00iHnb0P2Uj3FCw70FyWMF0001B4000003,0
    [2013-10-18T21:35:18.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-18T21:35:19.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-18T21:35:32.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-18T22:00:10.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.securitysubsystem.session.logon] [ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-000000000000040c,0:1:1] [tid: 3820] User weblogic logged in (session ID: 0kt172oncmo2vebhuborpulf31oa32v6ubafdeq  ). [[
    File:masterclientsession.cpp
    Line:366
    Location:
      saw.securitysubsystem.session.logon
      saw.securitysubsystem.checkauthentication.runimpl
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-000000000000040c,0:1:1
    ThreadID: 3820
    [2013-10-18T22:00:10.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.security.userpopulationcache.getparentapproles] [ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-000000000000042e,0:1] [tid: 3248] Populating application role hierarchy for the first time.[[
    File:userpopulationcache.cpp
    Line:202
    Location:
      saw.security.userpopulationcache.getparentapproles
      saw.security.securityimpl.getPermissions
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: 0kt172oncmo2vebhuborpulf31oa32v6ubafdeq
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=weblogic|User=weblogic
    ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-000000000000042e,0:1
    ThreadID: 3248
    HttpCommand: bieehome
    RemoteIP: 169.254.25.129
    HttpArgs: icharset='windows-1252',startPage='1'
    [2013-10-18T22:00:11.000+05:30] [OBIPS] [WARNING:16] [] [saw.catalog.item.properties.set] [ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-000000000000042e,0:1] [tid: 3248] Adding property Desc with value Data Source: BIP WS getFolderContent
    [http://localhost:7001/xmlpserver/services/v2/CatalogService?wsdl]
    Parameters: User ID, Password, Folder Path --
    Note: Edit the data set and change host name & port to match the BIP server's host and port in your environment. exceeds an entry's the maximum size soft limit 256. There are 263 bytes in this property for item /shared/Sample Lite/Published Reporting/Data Models/WS getFolderContent DM.xdm.[[
    File:itemimpl.cpp
    Line:1555
    Location:
      saw.catalog.item.properties.set
      saw.catalog.impl.read
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: 0kt172oncmo2vebhuborpulf31oa32v6ubafdeq
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=weblogic|User=weblogic
    ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-000000000000042e,0:1
    ThreadID: 3248
    HttpCommand: bieehome
    RemoteIP: 169.254.25.129
    [2013-10-18T23:13:01.000+05:30] [OBIPS] [ERROR:16] [] [saw.taskScheduler.processJob] [ecid: 00iHtlYRxDu3FCw70FyWMF000048000000,0:766] [tid: 1320] Running task 'Cache/Query' finished in 3609 milliseconds, 24.0% of job's frequency (15 seconds).[[
    File:taskscheduler.cpp
    Line:423
    Location:
      saw.taskScheduler.processJob
      saw.threadpool
      saw.threads
    ecid: 00iHtlYRxDu3FCw70FyWMF000048000000,0:766
    ThreadID: 1320
    task: Cache/Query
    [2013-10-18T23:13:04.000+05:30] [OBIPS] [WARNING:16] [] [saw.taskScheduler.processJob] [ecid: 00iHtlYRxDu3FCw70FyWMF000048000000,0:769] [tid: 3972] Running task 'Cache/ReportCache/CleanupXMLDiskCache' finished in 6547 milliseconds, 5.4% of job's frequency (120 seconds).[[
    File:taskscheduler.cpp
    Line:423
    Location:
      saw.taskScheduler.processJob
      saw.threadpool
      saw.threads
    ecid: 00iHtlYRxDu3FCw70FyWMF000048000000,0:769
    ThreadID: 3972
    task: Cache/ReportCache/CleanupXMLDiskCache
    [2013-10-18T23:29:13.000+05:30] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 00iHtlZ5Zs43FCw70FyWMF000048000006,0:87] [tid: 3248] Failed to restore ctx from reference[[
    File:executioncontext.cpp
    Line:286
    Location:
      saw.dms.conext.unwrap
      saw.threadpool
      saw.threads
    ecid: 00iHtlZ5Zs43FCw70FyWMF000048000006,0:87
    ThreadID: 3248
    [2013-10-18T23:32:43.000+05:30] [OBIPS] [WARNING:16] [] [saw.threadpool.performance] [ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-000000000000065b,0:1] [tid: 3456] ThreadPool<HostLookup>.Thread count: running  0, maximum 1, idle 0. Jobs pending: 1.  No available threads, creating new thread for job. Approaching configured maximum for total number of threads.[[
    File:threadpool.cpp
    Line:661
    Location:
      saw.threadpool.performance
      saw.threadpool
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: 0kt172oncmo2vebhuborpulf31oa32v6ubafdeq
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=weblogic|User=weblogic
    ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-000000000000065b,0:1
    ThreadID: 3456
    HttpCommand: Sessions
    RemoteIP: 169.254.25.129
    threadpool: HostLookup
    [2013-10-18T23:36:41.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.securitysubsystem.session.logoff] [ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-0000000000000673,0:1] [tid: 3456] User weblogic logged out (session ID: 0kt172oncmo2vebhuborpulf31oa32v6ubafdeq ).[[
    File:masterclientsession.cpp
    Line:462
    Location:
      saw.securitysubsystem.session.logoff
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: 0kt172oncmo2vebhuborpulf31oa32v6ubafdeq
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=weblogic|User=weblogic
    ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-0000000000000673,0:1
    ThreadID: 3456
    HttpCommand: Logoff
    RemoteIP: 169.254.25.129
    HttpArgs: 
    [2013-10-18T23:36:52.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.securitysubsystem.session.logon] [ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-0000000000000a21,0:1:1] [tid: 2136] User weblogic logged in (session ID: behogqbi3f7quodtfe89msfuenpe4poli7vviei  ). [[
    File:masterclientsession.cpp
    Line:366
    Location:
      saw.securitysubsystem.session.logon
      saw.securitysubsystem.checkauthentication.runimpl
      saw.threadpool
      saw.threads
    ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-0000000000000a21,0:1:1
    ThreadID: 2136
    [2013-10-18T23:36:52.000+05:30] [OBIPS] [WARNING:16] [] [saw.catalog.item.properties.set] [ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-0000000000000a25,0:1] [tid: 3456] Adding property Desc with value Data Source: BIP WS getFolderContent
    [http://localhost:7001/xmlpserver/services/v2/CatalogService?wsdl]
    Parameters: User ID, Password, Folder Path --
    Note: Edit the data set and change host name & port to match the BIP server's host and port in your environment. exceeds an entry's the maximum size soft limit 256. There are 263 bytes in this property for item /shared/Sample Lite/Published Reporting/Data Models/WS getFolderContent DM.xdm.[[
    File:itemimpl.cpp
    Line:1555
    Location:
      saw.catalog.item.properties.set
      saw.catalog.impl.read
      saw.httpserver.processrequest
      saw.rpc.server.responder
      saw.rpc.server
      saw.rpc.server.handleConnection
      saw.rpc.server.dispatch
      saw.threadpool
      saw.threads
    SessionID: behogqbi3f7quodtfe89msfuenpe4poli7vviei
    AuthProps: AuthSchema=UidPwd|PWD=******|UID=weblogic|User=weblogic
    ecid: 585eecf65d051a4f:37e0f6df:141cc4c025e:-8000-0000000000000a25,0:1
    ThreadID: 3456
    HttpCommand: BIEEHome
    RemoteIP: 169.254.25.129
    [2013-10-19T15:39:35.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T15:39:36.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T15:39:53.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T16:17:49.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iHui8xZUj3FCw70FyWMF0000w8000006,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iHui8xZUj3FCw70FyWMF0000w8000006,0
    [2013-10-19T16:17:49.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iHui8xZUj3FCw70FyWMF0000w8000006,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
    File:sawserver.cpp
    Line:712
    Location:
      saw.sawserver
      saw.sawserver.terminatesawserver
      saw.sawserver
    ecid: 00iHui8xZUj3FCw70FyWMF0000w8000006,0
    [2013-10-19T16:21:20.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T16:21:21.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T16:21:28.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T16:46:45.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iHukTcpk73FCw70FyWMF0000x^000003,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iHukTcpk73FCw70FyWMF0000x^000003,0
    [2013-10-19T16:46:45.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iHukTcpk73FCw70FyWMF0000x^000003,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
    File:sawserver.cpp
    Line:712
    Location:
      saw.sawserver
      saw.sawserver.terminatesawserver
      saw.sawserver
    ecid: 00iHukTcpk73FCw70FyWMF0000x^000003,0
    [2013-10-19T16:47:37.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T16:47:38.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T16:47:45.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T17:14:14.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iHulvdjzm3FCw70FyWMF0000Bo000003,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iHulvdjzm3FCw70FyWMF0000Bo000003,0
    [2013-10-19T17:14:14.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iHulvdjzm3FCw70FyWMF0000Bo000003,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
    File:sawserver.cpp
    Line:712
    Location:
      saw.sawserver
      saw.sawserver.terminatesawserver
      saw.sawserver
    ecid: 00iHulvdjzm3FCw70FyWMF0000Bo000003,0
    [2013-10-19T17:40:44.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T17:40:46.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T17:40:52.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-19T23:01:26.000+05:30] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 00iHuotaMko4QtwN0ErY6F000164000003,0:14] [tid: 5244] Failed to restore ctx from reference[[
    File:executioncontext.cpp
    Line:286
    Location:
      saw.dms.conext.unwrap
      saw.threadpool
      saw.threads
    ecid: 00iHuotaMko4QtwN0ErY6F000164000003,0:14
    ThreadID: 5244
    [2013-10-20T02:04:06.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iHuotaMko4QtwN0ErY6F000164000003,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iHuotaMko4QtwN0ErY6F000164000003,0
    [2013-10-20T02:04:06.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iHuotaMko4QtwN0ErY6F000164000003,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
    File:sawserver.cpp
    Line:712
    Location:
      saw.sawserver
      saw.sawserver.terminatesawserver
      saw.sawserver
    ecid: 00iHuotaMko4QtwN0ErY6F000164000003,0
    [2013-10-20T11:48:46.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-20T11:48:47.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-20T11:48:57.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-20T15:46:37.000+05:30] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 00iHvlgtbGQ4QtwN0ErY6F0000xc000006,0:14] [tid: 2112] Failed to restore ctx from reference[[
    File:executioncontext.cpp
    Line:286
    Location:
      saw.dms.conext.unwrap
      saw.threadpool
      saw.threads
    ecid: 00iHvlgtbGQ4QtwN0ErY6F0000xc000006,0:14
    ThreadID: 2112
    [2013-10-20T16:39:48.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iHvlgtbGQ4QtwN0ErY6F0000xc000006,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iHvlgtbGQ4QtwN0ErY6F0000xc000006,0
    [2013-10-20T16:39:48.000+05:30] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 00iHvlgtbGQ4QtwN0ErY6F0000xc000006,0:12] [tid: 3188] Failed to restore ctx from reference[[
    File:executioncontext.cpp
    Line:286
    Location:
      saw.dms.conext.unwrap
      saw.threadpool
      saw.threads
    ecid: 00iHvlgtbGQ4QtwN0ErY6F0000xc000006,0:12
    ThreadID: 3188
    [2013-10-20T16:39:48.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iHvlgtbGQ4QtwN0ErY6F0000xc000006,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
    File:sawserver.cpp
    Line:712
    Location:
      saw.sawserver
      saw.sawserver.terminatesawserver
      saw.sawserver
    ecid: 00iHvlgtbGQ4QtwN0ErY6F0000xc000006,0
    [2013-10-26T14:10:43.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-26T14:10:44.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-26T14:10:53.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-26T18:12:31.000+05:30] [OBIPS] [WARNING:16] [] [saw.taskScheduler.processJob] [ecid: 00iI3SRDYQc4QtwN0ErY6F0000_S000000,0:3253] [tid: 2376] Running task 'Catalog crawler' finished in 30781 milliseconds, 0.8% of job's frequency (3600 seconds).[[
    File:taskscheduler.cpp
    Line:423
    Location:
      saw.taskScheduler.processJob
      saw.threadpool
      saw.threads
    ecid: 00iI3SRDYQc4QtwN0ErY6F0000_S000000,0:3253
    ThreadID: 2376
    task: Catalog crawler
    [2013-10-26T19:13:13.000+05:30] [OBIPS] [WARNING:16] [] [saw.taskScheduler.processJob] [ecid: 00iI3SRDYQc4QtwN0ErY6F0000_S000000,0:4115] [tid: 1768] Running task 'Catalog crawler' finished in 39547 milliseconds, 1.0% of job's frequency (3600 seconds).[[
    File:taskscheduler.cpp
    Line:423
    Location:
      saw.taskScheduler.processJob
      saw.threadpool
      saw.threads
    ecid: 00iI3SRDYQc4QtwN0ErY6F0000_S000000,0:4115
    ThreadID: 1768
    task: Catalog crawler
    [2013-10-26T22:44:23.000+05:30] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 00iI3SRXSXa4QtwN0ErY6F0000_S000006,0:143] [tid: 980] Failed to restore ctx from reference[[
    File:executioncontext.cpp
    Line:286
    Location:
      saw.dms.conext.unwrap
      saw.threadpool
      saw.threads
    ecid: 00iI3SRXSXa4QtwN0ErY6F0000_S000006,0:143
    ThreadID: 980
    [2013-10-26T23:06:48.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-26T23:06:50.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-26T23:06:57.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-26T23:16:28.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iI3uOfhJc4QtwN0ErY6F0000f4000003,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iI3uOfhJc4QtwN0ErY6F0000f4000003,0
    [2013-10-26T23:16:28.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iI3uOfhJc4QtwN0ErY6F0000f4000003,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
    File:sawserver.cpp
    Line:712
    Location:
      saw.sawserver
      saw.sawserver.terminatesawserver
      saw.sawserver
    ecid: 00iI3uOfhJc4QtwN0ErY6F0000f4000003,0
    [2013-10-29T22:53:32.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-29T22:53:34.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-29T22:53:42.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-29T22:54:17.000+05:30] [OBIPS] [WARNING:16] [] [saw.taskScheduler.processJob] [ecid: 00iI7f2ZR^04QtwN0ErY6F0000qk000000,0:34] [tid: 2152] Running task 'Catalog crawler' finished in 31172 milliseconds, 0.8% of job's frequency (3600 seconds).[[
    File:taskscheduler.cpp
    Line:423
    Location:
      saw.taskScheduler.processJob
      saw.threadpool
      saw.threads
    ecid: 00iI7f2ZR^04QtwN0ErY6F0000qk000000,0:34
    ThreadID: 2152
    task: Catalog crawler
    [2013-10-29T23:25:48.000+05:30] [OBIPS] [ERROR:16] [] [saw.threads] [ecid: 00iI7f2_HoN4QtwN0ErY6F0000qk000002,0] [tid: 1872] Error while executing job in PollThread.[[
    File:pollthreaddef.h
    Line:147
    Location:
      saw.threads
    ecid: 00iI7f2_HoN4QtwN0ErY6F0000qk000002,0
    ThreadID: 1872
    [2013-10-29T23:25:49.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iI7f2pCLu4QtwN0ErY6F0000qk000003,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iI7f2pCLu4QtwN0ErY6F0000qk000003,0
    [2013-10-29T23:25:49.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iI7f2pCLu4QtwN0ErY6F0000qk000003,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
    File:sawserver.cpp
    Line:712
    Location:
      saw.sawserver
      saw.sawserver.terminatesawserver
      saw.sawserver
    ecid: 00iI7f2pCLu4QtwN0ErY6F0000qk000003,0
    [2013-10-29T23:27:01.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 110427.0752 32-bit) are starting up.[[
    File:sawserver.cpp
    Line:465
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-29T23:27:02.000+05:30] [OBIPS] [WARNING:1] [] [saw.webextensionbase.init.workstationCheck] [ecid: ] [tid: ] WARNING: The Oracle BI Presentation Services server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.).  Number of concurrent users may be severely limited by the operating system.[[
    File:webextensionbase.cpp
    Line:496
    Location:
      saw.webextensionbase.init.workstationCheck
      saw.webextensionbase.init
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-29T23:27:09.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services have started successfully.[[
    File:sawserver.cpp
    Line:563
    Location:
      saw.sawserver
      saw.sawserver.initializesawserver
      saw.sawserver
    ecid: 
    [2013-10-29T23:46:43.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iI7guS2Tx4QtwN0ErY6F0000rK000003,0] [tid: ] Server shutdown initiated by OPMN.[[
    File:socketrpcserver.cpp
    Line:818
    Location:
      saw.rpc.server.listen
      saw.sawserver
    ecid: 00iI7guS2Tx4QtwN0ErY6F0000rK000003,0

  • Problem in calculation with web analysis

    Hi, Experts..
    Here is an interesting quetion...with Web Analysis
    I need to calculate mat ov/kg for a site which is obatained by (total value/total volume). When i went for calculation option in analysis tool manager and apply formula this,It is taking for only one site calculation not happening for the other sites.Totally we have 60 sites with us and would not be flexible to calculate it individually.
    Is there any possibility to run calc scripts...in web analysis... or how to solve this problem?

    It might be because you have set up the 60 sites individually within the Web Analysis grid? We had some difficulty when first using Web Analysis and needed to put the calculations at the highest level using the calc manager. You also have to be careful if there are lots of columns, due to the way the calculation manager applies calcs and formats due to the inheritance.
    Another option would be to push the calculation back to the cube, which is best practice as it's easier, more scalable for deployments.

  • Problem to read/write and Analyse/Regenerate Signal

    hey,
    i would like to do a complex platform. i have a RF signal, i would like to save it in a binary File (like TDMS file) and after that, i would like to regenerate it, but i have a problem with that.
    My configuration: Labview 8.5 with modulation toolkits, OS Windows XP, PXI-5660 (Analyser) and PXI-5670 (Generator) 
    Find two VIs attached, please help me 
    Seb_MDI
    France
    Attachments:
    Save_read_test_dynamique_trigger_IQ.vi ‏87 KB
    read_emit_test_dynamique_IQ.vi ‏87 KB

    Hello,
    You can use the Arbitrary Waveform Generation Mode, in order to generate custom data with your RF signal generator.
    You will find an example doing this with a simple file : LabVIEW » Help » Example Finder and look for RFSG Write Signal From File.vi
    This will help you do what you want. You will have to retrieve the data from your TDMS file like it is done in the example with binary files.
    Have a nice day.
    Regards,

  • Configuration problem with Applet Hyperion Web Analysis

    We have installed Hyperion Web Analysis 9.3 on IBM Websphere 6.1 however we have some problems when we try to enter Web Analysis URL (http://localhost:9085/WebAnalysis/WebAnalysis.jsp) due to Applet Web Analysis Client do not initiate. We had checked Web Analysis logs and we found the next error:
    [10/9/07 19:35:09:814 CDT] 0000002a SystemOut O [ERROR] WebContainer : 0 com.hyperion.atf.internal.services.containers.UserSessionContainer - org.apache.ojb.broker.metadata.ClassNotPersistenceCapableException: com.hyperion.atf.services.ControllerLock not found in OJB Repository
    Any ideas about why we are getting this error and how to fix it?

    Hi,
    I guess you might have better luck if you post on the Hyperion forum: Essbase
    B.

  • Problem with E2E Root Cause analysis in EHP1

    Hi All,
    I'm facing a very strange problem with using the E2E RCA functionality in EHP1. The problem is when I select the systems that I want to analyse and click on a functionality such as change analysis, I get the following error message in SAP GUI:
    Action canceled
    Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable.
    I'm fairly sure that this is a connectivity problem because it only happens on my client machines which are behind the firewall. If I connect to solution manager without going trough the firewall I can access the application. I have checked all firewall logs and it is not blocking anything. I also did a trace using wireshark but could not find anything suspicious.
    Has anybody faced this problem? Any suggestions to resolve the problem?
    Cheers,
    Masoud

    Hi,
    If you have PI system in your landscape, I would strongly recommend to upgrade to SP15.
    Trace monitoring for PI is to be available from SP17 (Not yet released)
    Check [this Link.|http://service.sap.com/e2e].
    Hope this solves your problem.
    Feel free to revert back.
    --Ragu

Maybe you are looking for

  • AD Migration from NT 4.0 using New Domain Name & Unity UM

    The customer currently has Unity 3.1(5) UM with Exchange 5.5 in NT 4.0 domain. They will be migrating to AD 2000 during phase 1 of the project, which will be followed by Unity upgrade to 4.0(4) a few weeks afterwards. During the phase 1, Exchange 200

  • Why do I have items waiting to be downloaded when I already have those items?

    Every time I open iTunes I get alerted I have items to download but I already have those items in library. Now I have a lot of duplicates.   Why does it do this? How to fix?

  • Do iPhoto journals created on iOS now sync on iPhoto 9.5 for mac?

    hi all, ive spent a lot of time on my iPad touching up travel photos and creating journals. I've just upgraded to Mavericks, and am thinking about getting the new iPhoto 9.5 for iMac. Will the journals i have suddenly appear if i make this upgrade on

  • Self defined type how to create value attribute

    Hello! How can I create a new context "value attribute" if its type is doesn't exist in the drop down list where you can choose either a primitive data types or a java Type. It is an self defined class. It's name is  "Notebook". I want to bind all th

  • CatalogPath in Instanceconfig.xml

    I have created a repository and in the presentation layer I have three subject areas. Now I want to change the instanceconfig.xml so that i have separate catalog folder for each subject area. So can i have define catalogpath like below, I mean can I