Problem in MD01 and MD03

Dear Experts,
Please guide me to understand the following issue:
When I run MD01 for a plant, there are no materials planned. No purchase reqn. are generated.
However when I run MD03, the MRP results for the given material (in the same plant) are coming and purchase reqn. is generated.
Shouldn't this material (used in MD03) be reflected in the MRP results generating in MD01 also?
Pls guide me, where I am missing something.
Thanks & Regards,
Rohit.

Dear Sir,
But it is not happening, I am running MD01 after ticking the "Display Material List", then also the material is not reflecting in the results.
However when I run MD03, by giving the material code, the purchse reqn. is generated there.
Pls guide me.
Thanks & Regards,
Rohit.

Similar Messages

MD01 and MD03

Dear Experts,
I have run Total Planning using TCode MD01 , it has created a lot of PRs for a lot of Materials , BUT some materials where not listed in those PRs however when I have run TCode MD03 for a Material it created A PR , So what is the reason of not creating it using MD01 ????
Please Advice
Best Regards

Hi,
This may be due to the problem with planning at plant level MD01 id the planning at plant level and MD03 is the planning at material level. Planning file entries will be created for the newly created materils. Please check in MD20/MD21. For detailed analysis please go through the link. This will definetely resolve your issue. Thanking you.
PR not created while running MRP plant level

MRP Run in MD01 and MD03 is different

Dears,
I am new to MRP processes. Maybe the problem is trivial maybe not.
We have a 9 000 spare parts and would like to use a limited MRP to help operators to know which number of spare parts is coming to shortage.
I set material master and made some settings in customizing for the plant I use.
After that I choose one material which stock is below reorder point.
I run MD03 and system works fine - it creates a planned order.
However when I run MD01 (or se38 ->RMMRP000) with the same parameters as for MD03 , the system creates nothing. Only telling that MRP was run and which parameters I choose.
I run MD16 to see maybe there are some planned order that system created and did not tell me, but nothing as well.
Only MD03 works if I choose the material. However, collective run MD01 is not working.
Any ideas?

Hi Zhargal,
Could you pls provide some more info on MRP control parameters you use while running MRP with MD01?
Also refer the following thread for more info on MRP
MRP: Frequently Asked Questions
Regards
Mangesh S

Differences between MD01 and MD02.

Dear SAP Experts,
Please tell me the various differences between MD01 and MD02.
In which specific cases, MD01 should be used??
Thanks and regards,
Kaushik Basu.

Hi,
1. Md01 is the MRP Run for plant by giving planning scope.
2. Md02 is the mrp run for single Material from plant .
Also refer following T code for your information
Menu Nodes
Transaction
Activity
Master Data
MD25
Create planning calendar
MD26
Change planning calendar
MD27
Display planning calendar
MDSA
Display BOM explosion number
MDSP
Edit BOM explosion number
MEQ1
Maintain quota file
OPPP
Explode BOM by date
MDUS
Display project assignment
MDUP
Process project assignment
MDL1
Create production lot
MDL2
Change production lot
MDL3
Display production lot
Planning
MD20
Create planning file entry
MD21
Display planning file entry
MDAB
Set up planning file entry in background
MDRE
Check planning file entry
MD01
Total planning online
MDBT
Total planning in background
MD03
Single-item, single-level planning
MD02
Single-item, multi-level planning
MD43
Interactive single-item planning
MD50
Multi-level, make-to-order planning
MD51
Multi-level project planning
MF52
Display planning table
MF50
Change planning table
MF57
Planning table by MRP lists
MF51
Planning table by production list
Evaluations
MD04
Stock/requirements list
MD07
Collective access of stock/requirements lists
MD05
MRP list
MD06
Collective access of MRP lists
MDLD
Print MRP list
MD45
Planning result
MD46
Collective access of planning result
MD44
Planning situation for a material
MD47
Planning situation for a product group
MD48
Cross-plant planning situation
MD4C
Order report
MD09
Pegged requirements
CO46
Order progress
Planned Order
MD11
Create planned order
MD12
Change planned order
MD13
Individual access of planned order
MD16
Collective access of planned orders
MD14
Individual conversion of planned order into purchase requisition
MD15
Collective conversion of planned orders into purchase requisitions
MDUM
Convert planned order into purchase requisition in background
CO40
Convert individual planned order into production order
CO41
Collective conversion of planned orders into production orders
CO48
Partial conversion of planned order into production order
COR7
Individual conversion of planned order into process order
COR7_PC
Collective conversion of planned orders into process orders
COR8
Partial conversion of planned order into process order
MDVP
Collective availability check
MDAC
Execute action for planned order
Hope it clear to u.
Edited by: Atul Zod on Nov 21, 2008 6:59 AM

Problem with JPanel and/or Thread

Hello all,
I have the following problem.
I have a JFrame containing to JPanels. The JPanels are placed
via BorderLayout.
JPanel #1 is for moving a little rectangle (setDoubleBufferd), it is
a self defined object extending JPanel.
The paint methon in JPanel #1 has been overwritten to do the drawings.
JPanel #2 contains 4 JButtons, but they have no effect at the
moment. It is an "original" JPanel.
The class extending JFrame implemented the interface Runnable and
is started in its own thread.
After starting the programm everthing looks fine.
But if I press a Button in the second JPanel this button is painted in
the top left corner of my frame. It changes if I press another button.
Any help would be appreciated.
Thanks.
Ralf

I have a JFrame containing to JPanels. The JPanels are
placed
via BorderLayout.The type of Layout does not seem to be relevant
>
JPanel #1 is for moving a little rectangle
(setDoubleBufferd), it is
a self defined object extending JPanel.
The paint methon in JPanel #1 has been overwritten to
do the drawings.
JPanel #2 contains 4 JButtons, but they have no effect
at the
moment. It is an "original" JPanel.
The class extending JFrame implemented the interface
Runnable and
is started in its own thread.
After starting the programm everthing looks fine.
But if I press a Button in the second JPanel this
button is painted in
the top left corner of my frame. It changes if I press
another button.
I noticed you solved this by painting the whole JFrame.
Yeh Form time to time I get this problem too......
Especially if the screen has gone blank - by going and having a cup of tea etc -
Text from one Panel would be drawn in another.. annoying
At first it was because I changed the state of some Swing Components
not from the Event Thread.
So make sure that your new Thread doesn't just blithely call repaint() or such like cos that leads to problems
but rather something like
SwingUtilities.invokeLater( new Runnable()
public void run()
MyComponent.repaint();
});However I still get this problem using JScrollPanes, and was able to fix it by using the slower backing store method for the JScrollPane
I could not see from my code how something on one JPanel can get drawn on another JPanel but it was happening.
Anyone who could totally enlighten me on this?

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Problem with JNI and Tomcat (and threads???)

Howdy,
Here is the issue - I would like some help on HOW to debug and fix this problem:
2 test use cases -
1)
a)User goes to Login.jsp, enters user and password
b) User submits to LoginServlet
c) login calls JNI code that connects to a powerbuilder(Yes I know this is ugly) PBNI code module (this is a .dll) that authenticates the user with the database
d) the servlet then redirects to another .jsp page
e) user then submits to LogoutServlet - also a JNI call to a powerbuilder PBNI code module
f) REPEAT STEPS a-e over a few times (inconsistent) and then the call to the JNI code hangs
2)
a) users does NOT goto Login.jsp, but rather calls LoginServlet and passes the userid and password as GET parms
b) user does NOT get redirected to a page (redirect code commented out)
c) user calls LogoutServlet
d) repeat steps a-c at will and no failure, no hanging
The only difference is that in case 1 (with JSP), there is a redirect and it afffected the JNI call by haniging inside JNI code.
In case 2 (without JSP) there is still a JNI call, but it does not hang. In addition, when it hangs and I stop Tomcat, the logs show cleanup entries that say:
Oct 19, 2004 9:17:09 AM org.apache.catalina.core.StandardWrapper unload
INFO: Waiting for 1 instance(s) to be deallocated
Oct 19, 2004 9:17:10 AM org.apache.catalina.core.StandardWrapper unload
INFO: Waiting for 1 instance(s) to be deallocated
Oct 19, 2004 9:17:11 AM org.apache.catalina.core.StandardWrapper unload
INFO: Waiting for 1 instance(s) to be deallocated
Is this a threading issue in Tomcat???
On would assume that the JNI code is not cleaning up after itself, but I don't believe this is the case,
and even if it was, why would I get the tomcat log cleanup entries above???
What do those cleanup entries imply about the state of Tomcat????

hi ,
I met the same problem this morning, and searched the www.google.com in order to solve it, as a result, your article was shown on my screen. :)
Till now I have read some technical information and solved my problems. Maybe the solution be useful to you:
==============================
error message : (Environment : Tomcat 5, Windows 2003, Mysql5)
2006-3-29 11:53:48 org.apache.catalina.core.StandardWrapper unload
message: Waiting for 2 instance(s) to be deallocated
==============================
cause: the number of connection to database exceeded.another word,too many connections.
==============================
solution: close the connection when it becomes useless for your program. :)
==============================
ps. Sorry for my weak English . hehe ....

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud. I get a message on my phone that says " the URL you are requesting is not found on this server". Pics and videos have been deleted too.

I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud. When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play. I get a message on my phone that says " the URL you are requesting is not found on this server". I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted. I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either. Is there someway to get the videos to play on my phone again? Make the photos not as blurry as they are now and to restore the pics and videos that have been lost? I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be. Please help if you can.

I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
Need help too!!

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problems Receiving Emails and some data on WIFI since latest software update.

Problems Receiving Emails and some data on WIFI since latest software update.
My blackberry torch will not receive emails on wifi since the latest software update, I've tried numerous wifi networks and several handsets, even had them replaced and received a brand new. Still the same problem.
When turning off the wifi network on the torch, the phone will stall for 5-10min while it tries to communicate with the network (vodafone) to receive outstanding emails and data.
Can someone please inform Blackberry and get a quick fix on this

Sounds like you have Do NOt Disturb turned on.
settings - do not disturb - off

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem in MD01 and MD03

Similar Messages

Maybe you are looking for