Problem in MD81 Tcode.

Hi Gurus,
When the PP consultant is trying to Create Individual Items using MD81, it is giving the error " Item category not available in the table T184" But from the SD side, I have assigned the item category to the sales document type. also the field for item category ( PSTYV ) is present in the table T184. What can be the problem? is this any issue related to SD?
Thanks & Regards
Kaushik Ghosh

Hi,
Item Category and High Level Item Category are not assigned to Material, but they are assigned to Sales Document Type and Item Category Group. SPRO -> Sales and Distribution -> Sales -> Sales Document Item -> Assign item categories.
As you mentioned, you can get the details from table T184.
Table T184 gives the options on how the system has to react in various scenarios?
Combination of Sales Document Type in Sales Order, Item Category Group which is from Material Master and... result in the Item Category that is populated for the Item.
Regards,
R.Brahmankar

Similar Messages

  • Problem in executing TCode IFCU

    Hi Experts,
    i am facing a problem in TCode IFCU,
    i've done all required customization for the same,after entering a value on IFCU screen,
    when i give save option, system flashed below mwntioned mesaage,
    please suggest the solution,
    Unit of measure L is not convertible to stockkeeping unit EA
    Message no. M7026
    Diagnosis
    An error has occurred during conversion of the quantity into the various units of measure ( stockkeeping unit/alternative units).
    System Response
    The system cannot post the document.
    Procedure
    Contact your system administrator.
    Thanks and Regards
    Pravin

    Hi,
    yes sir problem was there in setting , Assign Auxiliary Materials and Consumables,for other material check was put in default check box was ticked for which UOM was EA,
    but now other error message apperas as mentioned below,
    Fld selectn for mvmt type 261 / acct 400050 differs for Cost center (010)
    Message no. M7093
    Diagnosis
    Comparison of the field selection strings from movement type 261 and G/L account 400050 has revealed that there is an incompatible field selection combination at one or more points.
    Field for which the field selection is different: Cost center
    Example
    On the movement type screen, a given field is a mandatory-entry field, whereas on the G/L account screen, the same field is suppressed.
    System Response
    You cannot post this transaction, unless you have changed the field selection adequately.
    Procedure
    Contact your system administrator.
    Action to be taken by the system administrator
    Check whether any postings resulting from this movement type are to be made to the G/L account determined automatically. If you find that the G/L account is not correct, check the automatic account determination in the Customizing system for valuation.
    Proceed
    If the G/L account is correct, use the report RM07CUFA to compare the field selection for the movement type with the field selection for the G/L account and change the incorrect settings or the field status group of the G/L account.
    Proceed
    Best Regards

  • A problem in hr tcode pa30

    hello experts,
    I am facing the problem with tcode that is pa30,when the user are entering the data in tcode pa30 screen and saving the data ,it is thrwing the error messsaga
    "ENTRY OUTBOUND TABLE NOT FOUND " please give me the solution for this error message
    and it is very urgent please give it as early as possible.
    ragards
    RAHUL+

    Hi Rahul,
    Although I have never experienced this sort of an error, a solution always lies in tracing the error message into the ABAP code using a where used. For the error message popping up, ask an ABAPer to read the message ID and number and from SE91 search for the point where the error message is raised. Most messages in HCM module though cannot be traced through where used since they are called dynamically. Hence ask the ABAPer to put a watchpoint on the message ID and/or message number (SY-MSGNO) and then check the table entry which is being validated and subsequently failing. IF this also fails, look up service.sap.com with the message number and ID for help notes.
    Also, please check and ensure no IDocs are being triggered in user exit processing from the infotype update(s), the error message seems to be somewhat related to partner profiles not having been maintained for an IDoc processing.
    Hope this helps somewhat.
    Regards,
    Aditya
    Message was edited by:
            Aditya Laud

  • Problem with KP06 Tcode

    Dear ALL,
    I Have one problem, that is when i Goto KP06 Tcode, it will give me information message "Fund Accounting active: Layout 1-101 is unsuitable" . Becase of this i am not able to enter planned values. please let me know how to solve this problem.
    Regards
    Manohar

    Hi,
    You seems to have activated funds management in your company.
    Change your planner profile by using T code KP04.
    Change it from SAPALL to SAPFUND. This may help you. Revert the result.
    Regards,
    Jagadeesh S

  • Problem in SPROXY tcode

    Hi Forum,
    When i execute tcode SPROXY in a R/3 system, maintained as Business system in XI, it prompts for user name and password,
    can u pls tell me why this happens....
    I have maintained all required RFC destination in the R/3....

    Hi,
    I have come across the same problem.. Where username and password was maintained properly.. But, the RFC was not present in R/3 itself....somehow it was got deleted.. So, plz ask the basis to check that also..
    Regards.

  • Problem with Custom Tcode.

    Hi,
    I have a report and when I run it it is working fine and I gave a Tcode to it. Now when I give the Tcode in the Trasaction code window and execute it, it is going to the selection screen properly, but after giving the input values and executing it is going to the SAP Easy Access screen.
    When I run the report with out Tcode from SE38 it is working fine,
    Can you please help me why it is happening.
    Thanks,
    Neelu.

    Hi,
    I executed the Tcode then selection screen came and I gave the input vaules and /h for debugging and executed to debug, but it is directly going to SAP Easy Access Screen. I am not able to debug from Tcode. From SE38 report is working fine.
    Thanks,
    Neelu.

  • Problem on RSA1 Tcode

    Hi BW Guru's
      Last week my client inistall BW 3.5 server  and they give me 120 as client no and IP adress .
    today i enter the server with my user id and password with 120 client.
    i enter Tcode RSA1 screen it display the messeage "  u can work on client 000 ".
    remaning all Tcode are working .
    can i know the reason .......
    how can i slove the this issue.
    it is very urgent.
                                                Thank u
                                                  PSR

    Hi ,
    i solve the issue...
    thanks for fast responce...
    now i am open RSA1 .
    tell me any other settings needed in starting satge of BW project.
    tmrw on wards i will start the work .
    now my work is activate all BCT cube's and laod data from r/3 to bw.
    so for these work any other settings is needed..
    waiting for good answers..
                                                     Thank u
                                                       PSR

  • Problem in VA02 tcode

    hello Experts,
    when VA02 is changed , after saving the order, displaying the following error
    Product 10030A1H1 is in order-stop from 2008/08/01 to 2009/02/28 in the plant GB12.
    kindly suggest whats the problem .
    Thanks and regards,
    sainath

    Hi:
    The product is not active so after doing the changes, it does not get stock transfer, hence it shows the error as you mentioned.
    Regards
    Shashi

  • LSMW problem with ref tcode FBCJ

    Respected Members,
    i have 1000 and more cash receipts data in flat file and i have to upload it through LSMW but when i m trying to recording through FBCJ in lsmw and finally in transfering data ,getting the error that there is no record in batch input session.
    I m not getting how to solve ,please tell me in detaills at least with one example how to upload cash receipts with lsmw or bdc.
    Thanks a lot.
    If there is any standard program or object is there then also let me know.
    THanks a lot.

    Hi Manish,
    I have seen your query regarding the FBCJ Tcode. Hope you might have come across this issue, right....
    I'm also facing error while developing in both BDC and LSMW.
    Would you mind sending those codes....
    I will be very greatful to you... pls.
    Regards,
    Jacob S.

  • Problem in MB90 tcode.

    Hi friends,
    when i am executing MB90 tcode i am seeing message like  no messages for initial processing exist. i filled all the fields.
    i want to take print forgoods movements  material document. plz help me.
    regards
    saiteja

    HI santhosh,
    i checked  MSEG and MKPF both the tables . both the doc no and financial year was avilable .
    and i filed all input fields in MB90.
    Output Type                     WLB1
    Transmission Medium             1
    Sort order                               01
    Processing mode                   1
    Material Doc. Year                2010
    Material Document                4900699301    i field like this .still i am getting same message.
    regards,
    saiteja

  • Problem with  pt_qrem tcode

    Dear all,
       when i execute pt_qrem without specifying organizational unit, to get cumulative of remuneration or overtime(p2010-anzhl), it takes overtime of all organizational unit and get the sum.
    when  i run the same for indivdual departments and take the sum.,,,, these two figures are different,  how it happens?
    Regards,
    naz

    Hi,
    I don't think you can add z-fields to this standard program.
    I would copy RPTBAL00 to ZRPTBAL00 and change the program.
    Regards,
    Bert

  • Problem in zmm31 tcode

    hi gurus,
    in this program,as per client requirement i have added up pending qty  field in from j_1iexcdtl table .
    here i have used W_FINAL-PEN_QTY = MENGE - MENGA.
    here when we are giving the values for 1,1 the qty is 0.
    but while testing the functional consultant has given 5,3 for quantities,here  it is giving 0 as pending qty..
    here menge menga field description is quan in table.
    pls find me an interim solution.

    Hi Nagarajan,
    I am also having same issue with
    R185D-DATALOSS, This flag was behaving differently in each environment(Development & Quality).
    Could you please provide information for the configuration you did for your issue.
    This will be helpfull for my requirement.
    Thanks,
    Satya.

  • Problem in MM Tcode ME54 standard program

    hi experts,
    I am trying to copy the standard program ME54 in Z program it is not displaying the ALV grid and that enhacements also hide .
    Please guid me how to run this program in Z program.
    Regards
    Nani

    See to it that you completely copy the program with all includes.
    Also dont forget to activate all after copying.
    Regards,
    Lalit mohan Gupta.

  • Problem in CM22 Tcode

    Hi,
    I wanted to populate the short description field in CM22 transaction. I am trying to find out the suitable user exit for it. But still I won't be able to find it.
    I am using the R/3 4.6C version.
    Pls suggest me asap.

    Hi Nagarajan,
    I am also having same issue with
    R185D-DATALOSS, This flag was behaving differently in each environment(Development & Quality).
    Could you please provide information for the configuration you did for your issue.
    This will be helpfull for my requirement.
    Thanks,
    Satya.

  • J1i5 --tcode problem

    hi
    freinds.. problem in j1i5 tcode update registers
    well iam runing it for 601 movemnet ttype but for month of decemeber when run it not showing the
    green icon ..its alwyas red and its not creating or updating when i select all and press f5
    i debugged it bur couldnt find still debugging can any body suggest me where is the problem .
    i am not getting the green icon at the time i stimulate so that i can find how it is updating the table j_1irg1.
    regards
    farukh

    67 Questions
    None closed !! Not even a helpful answer??
    May be your are not happy with answers .

Maybe you are looking for