Problem in message forwarding to SAP after office hours

Dear All,
i have a problem in forwarding the message with the priority very high to SAP after office hours.
can you please help me
Thanks,
Heba Hesham

Hi,
to get the automatic message forward working outside your business hours you need to maintain so called "Business Partner Call Times". See the IMG activity under the following path:
- solution manager
- SAP partner-specific settings
- service desk for service provider
- general settings
- maintain Business Partner Call Times
Use
Another component of the VAR functionality is to forward messages created with priority "Very High", outside the business hours of a service provider, directly to SAP. To be able to use this function, you must maintain calling times for the business partners of ordering parties.
You can specify the availability time for all VAR customers.
Activities
1. Choose a business partner.
2. Choose the Control tab.
3. Choose Calling Times in Business Hours.
4. Specify the weekly rule and days or hours.
5. Save.
In addition, the action for autom. sending messages to SAP in SPPFCADM should be maintained (e.g. AI_SDK_SP_SEND_AUTO)
Regards,
Richard

Similar Messages

Outgoing Call block on operator 7961 after office-hours

Hi guys,
we have call block enabled on our ccme 4.2 for 900 pattern and all users use pin to
make international calls.Now we want to block all 9.T pattern after office hours for operator phones only .please advise

Thanks Nadeem for your reply but the issue is i want to block outgoing calls
after office only for reception phone. other phones should work normal
we are blocking 24/7 international call using call blocking,users use login pin
so if i put other pattern of 9.T For local ,national and international to block after office-hours all phones will get blocked and all uses have to use pin after office to make calls
plus cant put after-hours exempt then cannot control users with international pin dialing
plz advise

Im looking for a message forwarding solution operating after sender specific rules

Hi - Im looking for a message forwarding app or solution somehow, that automatically will forward my messages (emails, texts, IM etc) to my different apps, devices
and mailboxes - depending on who the sender is. Any ideas ?

Hi,
From your description, this issue only occurs to one sender, messages from others can be forwarded normally. In your case, I recommend you verify if the message is set to "Do Not Forward" when this sender sends it.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Apex space problem....51gb full after 3 hours

hi,
my application only use tabular forms, tabular forms with reports and some standalone reports (joins over some tables)
cause of many foreign keys and n:m tables i use many LOV´s, too.
the problem is, after 3 hours my complete database space are full (51 gb)
-->ORA-00257: archiver error. Connect internal only, until freed.
one look on sessions --> massiv of that queries! why he makes ....NEXTVAL from dual. between that 3 hours i made no inserts!!!
/* Formatted on 2009/11/09 13:35 (Formatter Plus v4.8.8) */
SELECT hardwaretyp_id_seq.NEXTVAL
FROM DUAL
/* Formatted on 2009/11/09 13:35 (Formatter Plus v4.8.8) */
SELECT interneschnittstelle_id_seq.NEXTVAL
FROM DUAL
/* Formatted on 2009/11/09 13:35 (Formatter Plus v4.8.8) */
SELECT hardware_id_seq.NEXTVAL
FROM DUAL
/* Formatted on 2009/11/09 13:35 (Formatter Plus v4.8.8) */
SELECT entwicklungsprozess_id_seq.NEXTVAL
FROM DUAL
/* Formatted on 2009/11/09 13:36 (Formatter Plus v4.8.8) */
SELECT komplexitaet_id_seq.NEXTVAL
FROM DUAL
next step, clean the archive....but 3 hours later the same problem
At "Home>Administration>Monitor Activity>Page Views by Weighted Page Performance" i find 2 pages with mass "Weighted
Performance". i compared that pages with the same type of pages with no incredible "Weighted Performance", but i did not find any mistake.
after that i restart the database, the http server and clean the archive again.
i thought the problem was solved, because of no more mass "Weighted
Performance" on that 2 pages, but 5 hours later....
there are any typical mistakes for that problem?
i´m using 10g R2 and apex 3.2.1..
Edited by: sksus on 09.11.2009 12:39
Edited by: sksus on 09.11.2009 12:42

that is my problem....i didnt use any self made processes, computations or loops.
Everyting was generated by the oracle migration workbench ( access to oracle)....and after migration every table was valid. ("Home>Application Migrations")
I only used the option "Generate Maintenance Application" to create the application. (data model + tabluar forms on each table)
the only thing...the migration workbench created trigger on every table to generate the PK for inserts (and update ???).
CREATE OR REPLACE TRIGGER TEST.Hardware_Id_TRG BEFORE INSERT OR UPDATE ON TEST FOR EACH ROW
DECLARE
v_newVal NUMBER(12) := 0;
v_incval NUMBER(12) := 0;
BEGIN
IF INSERTING AND :new.Id IS NULL THEN
SELECT Hardware_Id_SEQ.NEXTVAL INTO v_newVal FROM DUAL;
-- If this is the first time this table have been inserted into (sequence == 1)
IF v_newVal = 1 THEN
--get the max indentity value from the table
SELECT max(Id) INTO v_newVal FROM Hardware;
v_newVal := v_newVal + 1;
--set the sequence to that value
LOOP
EXIT WHEN v_incval>=v_newVal;
SELECT Hardware_Id_SEQ.nextval INTO v_incval FROM dual;
END LOOP;
END IF;
-- save this to emulate @@identity
msaccess_utilities.identity := v_newVal;
-- assign the value from the sequence to emulate the identity column
:new.Id := v_newVal;
END IF;
END;

Print queue auto-deleted when printer is switched off after office hours

We have our fax program running 24-7 and autoprinting every received fax. When the printers are sutdown outside office hours, xserve deletes the jobs without holding them until the printers become available again.
Is there a trick to keep the jobs (auto) on hold and be printed as described above?
thanks
G5 2x2 Mac OS X (10.3.9)

Thanks for this info. Just what I need. Not intuitive at all. Jim

Automatic Call flow to auto-attendent after office hours

Currently running CCM 4.1, I would like to automatically switch some of our service lines automatically to a announcement service stating we're close for the day during weekdays and on weekends, can it be done? Is there anything I should consider having to purchase?

Yes, using the Time of Day Routing feature. Check this link for more details.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmsys/a03tod.htm
Regards,
Anup

Apple TV video cuts out after an hour

I have been having a problem where my screen goes black after an hour, but I can still hear the sound. I switched the "Sleep After" to never, but each time I watch for an hour, the screen still goes black. It doesn't matter if I'm watching Netflix or NHL hockey. I tried turning the television off, but that gets me an additional five minutes before it does the same thing again. If I reset the Apple TV by unplugging it, I get another hour. That seems ridiculous though. This is already a second unit as my last one got stuck after the update. The HDMI cable is also an Apple product. Also new, because they gave me a new one when I initially reported the problem to them. Reading around, people have also suggested turning the HDMI cable around. I just did that and that didn't make a difference either. My television is a Samsung which I have read might have problems with Apple TV.

Welcome to the Apple community.
I don't think that S*****g TVs have problems with the Apple TV per se, but it might be that there is something wrong with the HDMI card in the TV.
Next time this problem occurs try restarting the TV instead of the Apple TV.

Enable traffic only during office hours

hi,
is there a way to allow traffic on wireless network only during network hours ? i did not seen this feature in our controllers, is there any other way to disable the wireless network after office hours and schedule to get it enable next day before office hour.
thanks,
anvar

is there a way to allow traffic on wireless network only during network hours
Yes there are five (5) popular methods. And it will depend on what equipment you've got and/or how technically confident you are. The methods are:
You can enable time-based access on your Windows AD;
You can use time-based ACL and apply the ACL on the VLAN interface of your wireless network;
If you have WCS/NCS/PI, you can enable time-and-date to enable/disable the radios of the AP;
If you have WCS/NCS/PI, you can enable time-and-date to enable/disable the SSID; and finally
If your switch is Cisco then you can let the APs power down using EnergyWise.
Method 2 is popular and easy if you don't have Cisco WCS/NCS/PI. Option 4 is the most "destructive" because there's a chance your AP won't be powering up. This holds true of your AP is listed among the "Cisco Memory Component Issue".

Problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

Hello, I have a problem on FCP 7 message (error: memory saturates) after (command R) for rendering, cordially

Hello, I have a problem on FCP 7 message (error: memory saturates) after (command + R) for rendering, cordially

Do you use still images in your edit? Make sure all your images are RGB (not CMYK etc).
Hope it helps
Andy

Where is Message forward option after iOS 7 download

Successfully iOS7 has been downloaded and running well on my iPhone 5.
However noticed that the previous message forward feature has gone. Text & iMessage
Did anyone notice about this? where is that now?

Tap and hold a message and select "More.." from the popup menu. Then you can select all the messages you want to forward and tap the "forward" icon on the bottom right.

Problem with call forwarding and "call divert"

I have been receiving calls lately and a dialogue box pops up and says "fowarded call" with a button that says "dismiss" - I'm not sure why or how to disable this. in my settings I have call forwarding turned off. Also when I make calls I sometimes see messages saying something about call forwarding active or active diverts. Again I have call forwarding turned off and I see no settings for divert. How can I fix this?
Thanks.

i am having a similar problem. I have a Pearl 8100 with T-Mobile. I've had it for almost two years (since Jan. '07). About four weeks ago, this problem started. I have a landline office phone through AT&T, and when I leave the office, I forward this land line to my Pearl. When someone calls my office after hours, on nights and weekends, the problem is that instead of the person's name and phone number showing up on my caller ID, my Pearl shows that I am calling myself from my own cell phone! I don't get "Private Number" like you get, the caller ID shows that I am calling myself!
I've spent six or seven hours with T-Mobile tech support, with five different tech people over a period of several days and several phone calls, and they can't figure it out; their final and "best" answer is that it's a blackberry problem, that the issue has been addressed and identified as a "known issue" and a "trouble ticket" has been created. I contacted RIM and they directed me to their archived troubleshooting and to this forum, so I still don't have an answer. And T-M had no answer when I told them that this feature worked just fine from Jan. '07 through Aug. '08. T-Mobile offered to put me into a different device, the T-Mobile wing, which by fair assessment, looks like a piece of junk, and it's window's mobile, which is even worse. I rejected this option.
I'm hoping someone can solve this. One friend of mine thought that it's a network issue, any issue with caller ID would be with the network, not the phone or its software...this makes some sense to me...and one of the techs at TM thought that this could be the issue as well. As T-M upgrades its networks to 3G, these bugs are popping out. who knows, I'm sticking with this Pearl and 8100 for a little while longer, b/c I am waiting to see if an answer shows up somewhere on one of the forums, but I hate not knowing who's calling before I answer the phone!

HELP!! asa 5505 8.4(5) problem with port forwarding-smtp

Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa to my mail server.
my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
below is my config file , any help would be appreciated
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISPDsl
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_SMTP
host 10.0.0.2
access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network server_SMTP
nat (inside,outside) static interface service tcp smtp smtp
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
: end

Hi Jennifer
I have removed that nat line as suggested but still no joy.
here is my current config
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISP
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_Mail
host 10.0.0.2
access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network Server_Mail
nat (inside,outside) static interface service tcp smtp smtp
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
: end
also here is the packet trace
and my acl
Thanks

Problem in creation table for sap 4.6

hello evrybody
i have just a problem in creating table with se11;after saving and activite those table and zhen i select icon of contents it bloocks and shoz this error message :
Error reading table TMCNV; RC = 4
Message no. BMG 135
thank you for your help
Edited by: Rob Burbank on Apr 6, 2010 10:20 AM

Seems like you have a material number field (domain with conversion routine MATN1 or alike) and table TMCNV does not have the entry with key 'MATCONV', check the where used-list of message BMG 135. I assume this entry comes delivered by SAP, so try to restore it.
Also search for OSS notes with "TMCNV" or "BMG 135".
Thomas

Problem in deployment of ISA B2B after building the app using ant buildtool

Hi
I've a problem with building ISA B2B App after modification.
I've ISAWAC640SP11 and ant buildtool to build the application.
I've setup a customer project in NWDS.
I've build the application using build tool but when i try to deploy it
on SAP J2EE 6.4 using SDM i get a weird message stating
<b>"com.sap.sdm.util.sduread.IllFormattedSduFileException: The archive must be deployed with a 6.20 SDM, which has a SDM-SDA compatible version 1 or greater."</b>
Does anyone know what is the exact proecess to build the application in
SAP J2EE 6.4.
Do we have to use the ant build tool or we can directly build the app using NWDS
default build process ?
Also can some one suggest me to setup a customer project for extension and
modification of ISA B2B 640 on NWDS and SAP J2EE 6.4....
Thanks & Regards
Sandeep Solanki

Guys please help !!!
atleast gimme some idea or suggestions.. !!!
Regards
Sandeep

Problem in message forwarding to SAP after office hours

Similar Messages

Maybe you are looking for