Problem in migrating from 6i to 10g and I need help

I'm trying to change my program from 6i to 10g
I migrated libraries and
every thing is ok but when I try to migrate forms I had this error
ERROR opening D:\10gnkinkos\SHIFTS.fmb :oracle.forms.jdapi.JdapiException: A subclassed module could not be found during loading
Check subclass and library dependencies

With "the browser opening a white page" do you mean that the Forms Java applet won't start at all or is it starting with a Forms with a white canvas without any items on it?
If it is the first (Java not starting) there must be something wrong with your Forms setup. First try to run with the default setup without specifying a form. It should display test.fmx that it is included with the Forms setup. This Forms just tells you the setup succeeded and displays a single OK button

Similar Messages

  • Oracle 10G Installation and Migration from 6i to 10G and

    I never had the opportunity to Install or Migrate oracle any version.
    We are in the process of Installing Oracle 10G and moving Oracle Forms and Reports from 6i to 10G. I am asked by my superiors to conduct the interviews and decide which candidate will be best. These are temporary positions but are very important as a wrong candidate will affect the entire project. Need the right candidate.
    I would like some hints or suggestion as to what skills should I test or what questions to ask.
    Any sites or any questions will help me.
    Thanks to All

    See,
    to read how we performed the upgrade and see some issues:
    http://www.oracle.com/technology/products/forms/index.html
    http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
    http://www.oratransplant.nl/category/oracle/forms/6i-to-10g-upgrade/
    Good Luck!!

  • Portal Migration from 9i to 10G

    Hi all
    Iam new to Portals, We will be getting a portal migration project from 9i to 10G.
    I need to know the upgradation procedures needed to do the same. It will be very helpful if anyone can refer me any good document or white paper for this.
    Thnx in advance
    Sriram

    Hi
    I recommend before migrate to a new version, review the export and import, because this a bug in the portal 10G Don´t clone that's why is not function is the 10G version. you cand find documentation about migration and requiriments in the Oracle portal section. Be carefully with the indications in the pdf documentation and do a plan B if you have problems with the migration.
    Best regards
    deepjavero

  • Reports Migration from 6i to 10g

    In my Project we are having many reports .and we are trying to Migrate those from 6i to 10g can anyone tell me what are the suggestions i can make during this process .. i am the only person who is going to involve in complete migration solely. Any Ideas and suggestions welcome ..

    Hello,
    Oracle Reports: Migration from 6i to 10g
    http://www.oracle.com/technology/products/reports/migration/index.html
    FAQ Migration
    http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm
    Regards

  • Does migration from 6i to 10g affect on Graphs in Forms

    Hiiiiii Masters
    I am on migration from form 6i to 10g , and i need to migrate the Graphical application too.
    Here i came to know that there is no Graphical support in 10g..
    What should i do? Can any one give me the steps...
    Thanks and Regards
    Swap

    check this document,
    Oracle® Forms Migrating Forms Applications From Forms 6i

  • I have problems transferring files from PC to Mac and from Mac to Mac

    I have problems transferring files from PC to Mac, and from Mac to Mac.  PC to PC is fine.  Nothing but problems with the Mac.  One example:
    While working on my PC, I open shared folders on an external HDD connected to the Mac.  I click on paste to move the files.  I get an error after a few seconds to a minute of trying to move several files from my PC Win 7 to Mac OS Maverick, that there is a file already at the destination on Mac. This statement is true, but it was just put there because I am copying them over in that same action.  It reads 0Kb and wasn't there before I started.  Then I get an error: The Action Cannot be completed because the folder is open in another program.  Close the folder or file and try again..
    Whether I click on it a bunch right of way or wait, it still takes about 45 seconds. I have to do it with every file and it only happens when copying from a PC to Mac.  I have even restarted both computers so nothing is using any files.  If I copy one file at a time, I don't get any error.
    So I have one file to move, no problem.  If move 5 files, The first will go fine, but it shows all 5 files in folder at once.  All other files than the first show 0kb. I get the file already existing error once it starts the second file transfer, and I select move and replace.  Then I get The Action Cannot be completed because the folder is open in another program.  I wait or click repeatedly until it starts to move file.  That file will then show something other than 0kb.  When it is done, the error process starts all over.  I tried checking the PC with unlocker, but the files do not show themselves locked on the PC.

    Its not only French. Even certain characters in English will come across as gobblydegook from 1 platform to another. I see this in emails that likely were composed in Word & the characters don't come across.
    Not sure if this is still true, but years ago someone explained that there is a standard character set & then I think its extended characters & those vary from platform to platform or language to language, etc.

  • I am trying to download a video from the BBC iplayer and the downloader helper will not start. How can I solve this problem

    I am trying to download video from the BBC iplayer and the download helper will not start. How do I get it to start?

    No, this reply is not helpful. It simply generates this little gem:
    "This service requires the conversion feature to be enabled.
    Configure conversion ?"
    And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

  • After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.

    After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
    After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
    In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".

    Well, I found the solution here in another thread.
    i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
    So I found the solution here.
    Thank you graphicsluc!!!

  • When I try to install iTunes 10.5, it says, "There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor."  I have Windows XP and I need help.

    5, it says, "There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor."  I have Windows XP and I need help.

    After reading all these posts, one by one did not resolve my problem until I got the very end.  Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
    1. Stand alone upgrade to the latest Quicktime version
    2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
    iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
    Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
    Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
    Great work everyone who contributed!  Thank you very much!

  • Information about my hyperlinks disappeared from my hyperlinks panel and I need to know how to restore it.

    I am using InDesign CS6 for Windows. Information about my hyperlinks disappeared from my hyperlinks panel and I need to know how to restore it. I clicked on the panel and the hyperlinks section disappeared. I can see cross-references, but not hyperlinks.

    1.  Re: Information about my hyperlinks disappeared from my hyperlinks panel and I need to know how to restore it.
    Thank you. I can see the word, and I tried dragging but there is no moving the divider.

  • HT4970 I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful

    I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful
    Max Cavichini
    Medical Legal Expert
    Problem ipad and i phone

    This has never been a feature of iphone,ipod touch or ipad.

  • REG: 4 different folders from the source side and we need to have the BPM t

    Hi All,
    We are using a BPM for file-idoc scenario. Previously we use to have one source folder which sends file and the bpm worked fine. Now we have a requirement where the files come from 4 different folders from the source side and we need to have the BPM to run independently for each folder.
    What are the changes to be made in IR and id for this..
    Thanks & Regards,
    Kiran.

    File adapter has a option advance selection of source file setting which can be used for picking files from different folder.

  • My daughters IPod was stolen and I need help trying to locate it?

    And I dont know how to do this and really need help

    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                                        
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • I have a PC and a need help to configure my external hard disk on my network. Thanks

    I have a PC and a need help to configure my external hard disk on my network. Thanks

    If you mean you wish to plug a USB drive into the Airport Extreme router (or TC not express) that is easy..
    The disk must be formatted FAT32.. as if.. stay away from FAT .. or HFS+ ie Mac OS extended Journaled.
    Format the disk on a Mac is best.. and even use GUID partition scheme not MBR.
    The PC has no issue writing and reading files because this is a network drive.. The PC does not write to the drive.. it writes files to the Airport OS which writes and reads the disk and passes the info using standard windows SMB.. To the windows computer it will be a Windows NT server.. FAT32 setup.
    If your setup is different.. to my hugely guessed assumptions.. give details.. always helps to have.. make and model.
    Make and model of disk.. make and model of router.. how the setup will be done.. what windows OS you run.. etc etc.
    As it stands your question could have nothing to do with apple at all.. other than you posted in a forum so I guess there is something apple in there somewhere.

  • This morning i tried to restore my ipod and it said:"the ipod "ipod cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavalible." i have no idea what to do and i need help

    this morning i tried to restore my ipod and it said:"the ipod "ipod cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavalible." i have no idea what to do and i need help.

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

Maybe you are looking for