Problem in mini USB conector

I buy a Withbaby bug the white appliance connector (mini USB) connecting with cable to recharge came loose and can not carry battery...

Olá Sujan
Há um "velho ditado" em Inglês ... "Uma imagem fala mais que mil palavras."
Uma vez que o monitor do bebê é claramente quebrado - e eu entendo que você diga o cabo mini-USB foi foi incluída na embalagem também foi defeituoso e causou o dano, você precisa voltar tudo para a troca "por novo» para a loja a partir do qual você comprá-los.
Se eu fosse você, eu não aceitaria uma reparação ou substituição com outra coisa senão novo na caixa equipamento. Desde que você acabou de comprar o WiThings, eu não posso imaginar qualquer lugar respeitável de negócios não concordar com isso. É o fabricante (WiThings) que acabará por implicar a perda - como deveriam com qualquer produto com defeito.
buenos dias de Texas
ÇÇÇ

Similar Messages

Router Console Connect Problem With Mini Usb (1941 Series - Os Win7 64Bit) (SOLVED)

I can not connect console with mini usb, my router is cisco 1941 series and my os win7 x64 help me please ?
My problem was solved thanks to this topic;
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing#comment-9697916

Hi,
Here is how I have managed to enable the communication with the 1941 using the usb A-B cable:
Download the usb console driver 3.1
Install the x64 version on your PC (as administrator)
After the installation was completed:
Open the Device Manager. There will be a new entry named “CiscoUsbConsoleWindowsDrive”. Expand it and select the “Cisco USB to Serial adaptor”.
From the drop-down select “Update Driver Software…
In the “Update Drive Software” dialog select “Browse my computer for driver software”
In the next window, a driver location should be displayed, if not browse your PC and find the …\Windows_64 folder where you have extracted the 3.1 driver.
After the driver software was updated, there should be a new entry in the “Ports (COM &LPT)” named “Cisco Serial (COMx)”.
You can configure the port here:
Right click on the “Cisco Serial (COMx)” and select “properties” and set the properties to this;
Bits per second :9600
Data bits              :8
Parity                    :None
Stop bits              :1
Flow control       :None
The new COM port should be ready to accept the connection with the router.
I am using Tera Terms VT, and it is working well with the above driver and settings.
Should you wont to use the Cisco Configuration Professional (CCP) download the 2.7 version and make shore you have the current Adobe Flush and a current Java installed on you PC.
Hope this will help.
AlexS

TS3116 After updating, apple TV does not work. A picture is one TV screen which ask to use mini USB.

Hi... I am not sure what generation I have
After updating, I does not start at all, no light signal.
Just picture show to me to use mini USB for Song logo.
How can I do?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Capture with mini USB

I am capturing, hopefully, a small project from a JVC Everio camera which only has a mini USB output connection which my version of CS4 doesn't seem to recognize. Is there something that I can do about this?
Thanks
Mick

Connect USB cable to computor (already on)
Open LCD viewer
Turn on camera
LCD should ask to "backup on computer" press the small joystick next to the LCD screen.
After a few seconds the camera should show in my computer and a dialogue box should apear on the computer screen. The files can now be accessed just as another drive.
Hope this helps.
I have been using the GZ-HD7 for years without any problems other than dealing with the .TOD files.

N900 hardware fault (mini USB port)

I had been enjoying the N900 for the three weeks since I received it. I didn't run into any of the reboot or other problems. With no warning, however, the mini USB port came undone from inside the device. I already sent the device off for warranty replacement but the warranty isn't going to replace all the settings and data I spent hours to do. It's my own fault for not storing a backup file off the device. Once the mini USB failed, the only option left was bluetooth or infrared to get data off the device but I decided I would just start from scratch instead. Anyway, it looks like I was just unlucky because I havfen't seen anyone else having the same problem. I'm relieved it's not an N97 lens scratch type issue.
Solved!
Go to Solution.

FYI Nokia and N900 users: this is NOT the fault of users. The root cause was poor design design of using a surface mount female USB connector rather than through-hole mount. The reports of incidents are piling up, the majority resulting from casual use soon after purchase.
Someone in Maemo Devices needs to take this seriously. The connector and mount method need to be changed ASAP if they have not already. Don't blame the users; honor the warranty and human decency and replace broken devices.
More here: http://tabulacrypticum.wordpress.com/2009/12/13/connecting-on-the-surface-an-n900-risk/

N85 wont charge using USB to mini-USB cord

Has anyone had the problem I'm having with my laptop and my N85? I used to charge my phone while at work using the supplied USB-mini USB cord. Suddenly it won't charge any more (unless I switch the phone off). The phone connects to Nokia PC suite, and is responsive in every way except that it no longer charges while connected to the PC. I've tried a generic cord in case it was a problem with the original cord and have exactly the same problems. I've tried changing USB hubs and STILL the same problem. I've rebooted both devices to no avail.
When I connect the PC 'dings' twice, then repeats this about 3 times. I can't identify what is going wrong so I can't fix it - any ideas?

You may need to play with the connection. I had mine USB plugged all the way into the computer port and it didn't register, but when I wiggled it out a bit, then it showed it was charging. WEIRD but true.
I just got my phone yesterday and am still trying to configure, etc it. But I love it. The battery life is far less than I'm used to coming from a BB world. But I also realize it's running more at one time than the BB did.
Good luck!

Problems with wireless usb adapter on MSI K8NGM-V

Hi!
I have a 3Com (3crusb20075) wireless usb adapter, and a MSI K8NGM-V Mainboard. Very often the usb disconnects from the network and i have to reinsert it to work again. A friend of mine have the exact same adapter and that one fails too. He uses mine without problems. I therefore belive that this is a problem with the usb ports on my mainboard. Have anyone heard of anything like this? I wanted to try to update my bios but i don't have a floppy so msi live update wouldnt let me, and i could find the bios files on the msi webpage so i cant burn them on a bootable cd. Help please
(I trying turning of power save mode on the usb adapter, without any luck. Tested it in linux. Same result)
Alex

The ability to access the network, but not the Internet, typically indicates that the computer is not able to either find or negotiate with the DNS servers. The proper DNS servers would be provided by your ISP using DHCP. In turn, the AirPort would use DHCP to provide these to both the wired & wireless computers connected to it.
Please try the following:
For each PC that is unable to access the Internet, temporarily include the following OpenDNS servers:
o Primary: 208.67.222.222
o Secondary: 208.67.220.220
You would enter these in the network TCP/IP settings for the respective PC's wireless network adapters. You may need to restart the computer in order for these DNS settings to "stick." After restarting, can you access the Internet with either or both of them?

Appletv mini usb port not working

Plugged in mini usb into Macbook and its not reading the appletv. Any thoughts?

only reason one connects it by usb is if the appletv have 100% crashed and need to have it's firmware restored
not sure what you mean by "does not read on my bacbook" but if you mean it does not access the macbooks shared itune lib then thats a feature that needs to be turned on in itunes on the computer
not be block by the firewall in the computer
and not be blocked by the wifi router
most wifi router blocking can be ruled out if you try to connect it by ethernet cable rather then wifi
then all you have which could be blocking you would be your computers firewall which you can turn off to test
or if you did not set your itunes lib to be shared which you can then do in your itunes on your computer

My iPod has a image of the usb conector from ipod and there is an arrow pointing to the iTunes symbol, when I connect it to my computer it says it needs to restore, but I don't want to lose all the apps I bought and fotos, etc. What do I have to do?

My iPod has the image of the usb conector and an arrow pointing to the ITunes's symbol. It says it needs to restore. I have been using it for 5 days. What do I need to do? Please answer <:)

I found the solution! thanks!

Need help locating a wallet case for an Xperia T2 Ultra Smartphone that has a slot on the side for the mini-usb

I realize this board is for Xperia tablets, but I don't see a board for Xperia Smartphones. I do hope someone here can help. I have a Sony Xperia T2 Ultra smartphone. I love the phone, but I purchased a case for it not realizing that the case doesn't have a slot on the side for the mini-usb connector, which means that I have to charge the phone with the case open.
I called Sony accessories, and they don't seem to make a case with a slot on the side. They have a very nice case, but again, it doesn't have the correct opening for the charger and you have to charge the phone with the case open.
I have also searched several websites for such a case with no luck.
Does anyone here know where I can find a wallet-style case for the Sony Xperia T2 Ultra with a magnetic closure (or some way of securing the case closed) that will actually allow me to charge the phone while the case is closed? Please let me know.

This is the only "question" I could extract out of your confusing post:
"I want to know if it even can be done in Flash or would we need to use something else like PHP or Javascript?"
It can`t be done in Flash alone you need php.
With the experience level you already admitted to, I strongly advise to stay away from such a project, you will save you and our customer a lot of headaches, no offense.

How to Output Digital Audio to Male Mini USB Connector?

I would like to input digital audio from my iPhone 5 to my headphone DAC/amplifier. The latter has a mini USB female connector for digital signal input. I envisage the following options, listed in the order of preference:
1. A cable with a male Lightning connector to a male Mini USB connector. This would be the most elegant solution but does such a cable exist?
2. Apple Lighting to female Micro USB adapter plus a male Micro USB to male Mini USB cable. Does this pass audio?
3. Apple Lightning to male USB connector (the cable which came with the phone) plus a female USB to male Mini USB connector. This should work technically because the Apple stock cable does output audio from the phone to my car audio system.
4. Any other ideas?
Which of the above options would be best to send digital audio from my iPhone 5 to my headphone DAC/amplifier? Thank you.

I believe you are not correct. You likely have not read my question entirely because I said that:
"This should work technically because Apple stock cable does output audio from the phone to my car audio system".
In other words, I connect my iPhone 5 using the supplied Lightning charging cable to the USB input of the car audio system and the music plays just fine.
However, I need a cable that has a Mini USB male connector, not a regular USB connector. Is there such a thing, or should I go with Options 2 or 3?
Thanks.

How can I connect a device with a mini USB, to my iPod?

Hi. Everyone
I have an MP3 player with a mini USB port. How do I connect it to my iPad?
JusticeDog

If you say that there is built in speakers. Most probably the connection is HDMi. You will need an adapter to connect the MacBook Air to the monitor through HDMI, at the same time, the adapter needs to support video and AUDIO.

Apple tv showing wire to connect to itunes via mini usb cable which i dont have?

apple tv showing wire to connect to itunes via mini usb cable which i dont have?

You need to get the cable to restore the ATV to factory settings, following the procedure here.
USB mini cables are available from many different sources; often even from local stores like CVS or Walgreens. They are inexpensive, as little as a few dollars online & around $5 from some local discount stores.

Dock to Mini USB connector?

Hello!
I want to ask if there any Dock to Mini USB connector available? I mean If I have iPhone, photo camera, external hdd and other mobile stuff and I need to carry only one Mini USB > USB cable for all devices. Maybe anyone know if anything adaptors like this aviable?
Thanx

Speculation is not allowed in the forums.

IPhone causes problems on other USB devices?

Is anyone having problems with external USB hard drives or any other USB peripheral when his iPhone is connected to a Windows PC or sometime after that?
I'm having some problems with external USB hard drives when the Windows system is continuously hammering them for more than a half-hour. The problem is not easily reproducable, and I don't know the cause.
It probably has nothing to do with the iPhone. But one possibility I have to consider is that the iPhone draws enough current (or something else I haven't thought of) that interefers with the USB communications.

What I meant in my previous post was that the USB wouldn't allow the iPhone to draw more current than the USB can safely provide, unless it was defective. I have an external hardrive, a wireless mouse, my printer and my iPhone connected directly to my laptop's USB ports and have not seen any problems with any of them. In several years of using USB devices, I've not seen any problems that I could assign to the USB ports/controllers... they just seem to work all the time. Will be interested as to your findings.

Problem in mini USB conector

Similar Messages

Maybe you are looking for