Problem in moving my messages

I'v got an N70.
I'v moves my messages to phone memory from my mmc card by moving the Mail folder from E:/System to C:/System
they are moved and can be seen in my phone messasges but they cannot be opened now !
What to do now?

the same happeneing only in ur inb0x or in every folder like sent items/drafts etc..??
try to open them by clicking n press open insted of opening them directly..
if u hav any other fone, try ur mmc card into that. then u will come to know that either the error in ur n70 or in ur mmc.
Message Edited by hasniraza on 23-Aug-2008 10:54 AM

Similar Messages

Moving a message to a folder corrupts the folder

Any time I move a message from one folder to another, the destination folder apparently becomes corrupted. I say this because I can "repair" the folder and that works - until I move another message into it.
Symptoms: I can see the message header in the message list pane, but cannot see any content in the message pane, nor does any content appear if I open the message in a tab. Sometimes repairing the folder once brings the message back, but the view is raw data (with header information and html tags); in this case, repairing it a second time fixes that problem. The message does automatically show as "read" after the requisite time period. Compacting the folder has resulted in the loss of the message completely (though only from the folder; it was still in the archive).
I have deleted the global-messages-db.sqlite file and recreated the index - no change.
Running Thunderbird 24.5.0 on Ubuntu 12.04.4, 3.2.0-64-generic kernel. My main e-mail source is an imap account. Apparently the problem does not exist when receiving mail in a pop account (at least I haven't been able to recreate it with minimal testing).
Any help would be very much appreciated.

So... i can NOT move a message (received via IMAP) to a folder without corrupting the folder (sometimes I can see the message header, sometimes not, but the message body comes up blank). So before moving a message to a folder I have to "repair" the folder, then move the message, then "repair" the folder again. Having to do that for any and every e-mail message I want to save is becoming... tedious.
One suggestion was to compact the folders; that happens automatically. Just to be sure, I've compacted a folder and then moved a message in - same problem.
Another was to make the folders smaller, so I moved a lot of messages (literally thousands, bordering on ten thousand or more) to the "Local Folders" section - no help there either.
The article in the answer from finitarry suggested using a tool to break the folder into 500 message chunks (so I could look for the corruption). Perhaps I misread the article, but it seemed to be looking for the raw files - hence my listing of the file structure for my profile. I have no idea which one to use for that. Editing text files - not a problem, and I do have an editor that will handle large files (vim).
If there is a way to export everything (and keep the folder structure) I can move all of the messages to Local Folders, export, and then import (assuming there is a chance that would fix things).

Moved mail messages often reappear

This is a problem that has been plaguing me for the last several months: when I move a message from my Inbox or Sent Mail to my Done folder on our work email server, the message reappears in its original location a few minutes later. I can delete it from the Inbox/Sent Mail, and will often return again. Sometimes I can delete the message 3 times before it stays deleted. I cannot tell where the source of the problem is.
I'm using Mail 4.3 on Mac OS X 10.6.4. The account is an IMAP account on a dovecot-1.0.7-7.el5 server, which is redhat's port of dovecot v1.07.
One oddity is that I use MailTags [1] to add info to the header of the email which I can then use for filing the email in the work email system. When I add a tag, MailTags resaves the message to the server. It does not change the identifier of the message.
I also tend to remove attachments after I've filed them, so I don't have extra copies of data files bloating my mailboxes. This also causes a resave of the message to the server.
I ran some experiments with different numbers of attachments, sources etc, and could not find the pattern.
Does anyone know how I can figure out where the problem is? It is completely crippling my email at work, because it is typically tripling the time it takes me to mark a message as done.
I've looked through the discussions, but nothing suggested there has done a lick of good.
Thanks for any help,
Bill

Ernie Stamper wrote:
Do you have the latest version of MailTags? I note, but have not ever used at all, that version 2.5 is cited as adding compatibility for Mail 4.3 in 10.6.4.
Yes, it's always been kept up-to-date.
The behavior you describe would be consistent with errors in the indexing of mailboxes, and it may be possible that MailTags is not keeping track of the messages when moved to the Done folder you describe, via communication with the index.
MailTags shouldn't have any influence when it comes to moving the messages to the Done folder, because they get dragged there by hand. It could have some influence when resaving the messages after adding the tags, but I would then expect to see duplicates when I add or change the tags, also.
I'll run some experiments and report back...

Mail not saving sent messages, not moving Junk messages

Hi everyone, I'm having a bit of trouble with OS Mail. I've set it up to use an IMAP account, and have set my preferences such that Mail should save all my sent messages in the Sent folder (I assume the Sent folder on my computer, not the one on my IMAP server). Regardless, neither my IMAP server's sent folder nor my computer's sent folder contain any messages that I've sent, and I have confirmed that these messages have in fact been received by the recipients (therefore successfully sent). I am unsure of how to resolve this issue, as there is no obvious setting change for me to persue. I just received this computer (new) a few days ago, so I wouldn't expect this problem to be due to disk maintenance/management, etc.
Also, I have noticed that Junk messages remain highlighted and in my inbox. I changed my prefs to have these messages be placed in my Junk Mail folder. Mail asked me whether I wanted to apply that preference to older messages marked as junk that have yet to be put in the folder; I indicated yes. Nothing happened, and the Junk Mail folder remained empty (until I manually moved the messages to it). Any ideas?
I have searched the forums for related issues and could only find problems that had an associated error message with it; my issue is different in that there are no error messages; Mail is simply ignoring my preferences. Thanks in advance,
Vic

In OS X Mail, this sent folder appears as a subdirectory
(sub "mailbox"?) under my "Inbox" mailbox along with
other folders that are mapped on my IMAP account.
This means you haven't set up your account properly. You probably should set Preferences > Accounts > Advanced > IMAP Path Prefix to INBOX, or something like that.
After putting the right string in the IMAP Path Prefix field, either the IMAP folders will appear somewhere else in Mail (i.e. not as subfolders of Inbox), or your problem will have already been fixed. Let me know what happens.
I should probably mention (just realized) that in my
account settings, my outgoing SMTP server is set to
be my ISP's server (which is different from my IMAP
provider).
I wonder if, by selecting "save messages on server"
I am saving these messages somewhere on my ISP?
Mail should still save the sent messages where you've told it to. It's Mail, not the SMTP server, that stores the sent messages. The SMTP server has no bearing on this, but it was a good idea to consider that possibility, nevertheless.
When I uncheck this option, perhaps my mail will
be stored on my local computer instead?
Yes, that's what would happen, but don't uncheck that option if you really want your sent messages to be stored on the IMAP server, or do it temporarily, so that Mail does at least save them somewhere until we fix the problem, but I believe I already know what the problem is.

Major problem using Nokia Test Message Editor

Using Nokia Test Message Editor on PC Suite 6.83 to create a new message (via USB cable), when I click on create new message (works fine) and then when I click on the "To" button, it says error. It asks me to close program as it has performed an illegal operation. Whys that? The only way I can currently get it to work is by manually entering the phone number but just cant use teh To button.
whats wrong?

No that's not helping, "oh boy".
I tried to Repair PC Suite from the Unistaller, same error.
Then I uninstalled PC Suite, restarted, ran PC Suite Cleaner 3.5 to get rid of registry settings and files. Then I noticed some old data in Application Data\PC Suite (old IMEIs) which I all deleted, then I restarted again and installed the newest PC Suite back. It asked me to install MMSync onto my phone, which I did. (see separate bug report on that
Then it gave me a message that some "Old Contact Browser data was found and has been moved to a separate folder", which I think is somehow related to the Contacts bug which I had described for a previuos PCS version, under my old nick "zak1974". Feeling good and all hopeful at last, I launched the Contact browser and it got all contacts with no problem, I went to Messages - Inbox. Clicked on Create New Message button, then "To" - only to find the same bug, which I am perfectly able to reproduce and describe on any level reaqired, as I have saved all screenshots and messages on the way to the Text Message Editor crash. All the above gives me some right to declare a software/firmware bug with the versions of products I had described in my first post.
Any other ideas?
N95 - King of Photos

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Problem in moving one talbe to anlther table

Hi ,
we are working in ECC6.0 ,here we are facing problem while moving one table to another table .plz find below code.
data : itab1 like p2001,
itab2 like p2002.
select single * from pa2001 into itab1 where ...........
move-corresponding :itab1 to itab2.
but here we are getting the error like both structures are deffirent ,so could you please let me know how to solve this problem.
Thanks in advance,
Sai.

Hi sai,
the sample code which you have specified here is fine...
i dont see any issues.
Can you specify the exact code and the error.?
the code mentioend is perfrcty alright.
the error u get might be beause of some other part of the code
thanks,
Jose

Problem in moving to final interanl table

Hi all,
i have one problem when moving all the fileds in final internal table
t_eina is the final internal table
i want to itab-matnr and maktx in t_eina or anyother final internal please correct the code according to htis requriment.if any one is intrested
tables: ztab2,mara,mvke,MARAV,eina.
DATA: BEGIN OF T_ztab2 OCCURS 0,
MTART LIKE ztab2-MTART,
dwerks like ztab2-dwerks,
END OF T_ztab2.
DATA: BEGIN OF T_mara OCCURS 0,
matnr like MARAV-matnr,
maktx like MARAV-maktx,
MTART LIKE ztab2-MTART,
dwerks like ztab2-dwerks,
prat1 like mvke-prat1,
lifnr like eina-lifnr,
END OF T_mara.
DATA: BEGIN OF itab OCCURS 0,
matnr like MARAV-matnr,
maktx like MARAV-maktx,
MTART LIKE ztab2-MTART,
dwerks like ztab2-dwerks,
prat1 like mvke-prat1,
lifnr like eina-lifnr,
END OF itab.
Data : begin of t_eina occurs 0,
matnr like eina-matnr,
lifnr like eina-lifnr,
Mtart like mara-mtart,
dwerk like mvke-dwerk,
maktx like marav-maktx,
end of t_eina.
*data: begin of itab occurs 0,
     matnr like marav-matnr,
     mtart like marav-mtart,
     maktx like marav-maktx,
     end of itab.
*DATA ITAB LIKE STANDARD TABLE OF MARAV WITH HEADER LINE .
select * from ztab2 into corresponding fields of table t_ztab2 .
select amatnr amaktx amtart ddwerk d~prat1 into table t_mara
from MARAV as a inner join mvke as d on amatnr eq dmatnr
for all entries in t_ztab2 where a~mtart eq t_ztab2-mtart
and d~dwerk = t_ztab2-dwerks.
select amatnr amaktx amtart ddwerk d~prat1 into table itab
from MARAV as a inner join mvke as d on amatnr eq dmatnr
where a~mtart = 'Z030'.
SORT T_MARA BY MATNR.
Select matnr LIFNR from EINA into corresponding fields of table t_EINA
for all entries in t_MARA Where matnr = t_MARA-matnr.
*select * from marav into corresponding fields of table ITAB where mtart = 'Z030'.
SORT T_EINA BY MATNR.
loop at t_EINA.
Read table t_MARA with key matnr = t_EINA-matnr.
move t_mara-mtart to t_eina-mtart.
move t_mara-matnr to t_eina-matnr.
move t_mara-dwerks to t_eina-dwerk.
move t_mara-maktx to t_eina-maktx.
modify t_eina transporting mtart matnr dwerk maktx.
endloop.
<u></u>

instead of modifying just use append t_eina.

Problem in moving a transport requst after changing the Infogroup

Hi Experts,
Im facing a problem in moving a transport request which has Infogroup changes.
In a action "intial entry of applican data" i have added a customized infotype in the infogroup.
In Dev it is fine..after transporting to quality even though the custom infotype showingup in the infogroup..while performing action the particular custom IT is not populating in quality system.
What could be the problem and how to resolve the problem
Please advice,'
Vi Sai.

Hi,
Please check if you have the necessary authorization to maintain your custom infotype in QAS. Enter /nsu53 after the previous infotype (previous w.r.t the custom infotype has been saved).
Also, check if you can directly maintain the infotype through PA30.
Hope this helps.
Donnie

Problem in deleting the message after reading

Hi
I m having some problem to delete the message after reading.
i read the FAQ, and there is only one question regarding to delete that i have tried but its not working
As my application required that message should be deleted after the processing.
Please help me out asap
Thank in advance.

now here is the protocol trace from starting to the end point
with the settings of
session.setDebug(true);
and
folder.close(true);
POP3: connecting to host "172.xx.xx.xx", port 110
S: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.6944.0 (xxxxx.xyz.com) ready.
C: USER test1
S: +OK
C: PASS Password
S: +OK User successfully logged on.
C: STAT
S: +OK 1 548
Total messages = 1
New messages = 0
================================
C: TOP 1 0
S: +OK
Received: from yyyyyy ([172.xx.xx.xx]) by xxxxx.xyz.com with Microsoft SMTPSVC(6.0.3790.3959);
     Thu, 11 Sep 2008 12:21:14 +0530
Message-ID: <3373112.1221115884647.JavaMail.284528@yyyyyy>
From: [email protected]
To: [email protected]
Subject: testing
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Return-Path: [email protected]
X-OriginalArrivalTime: 11 Sep 2008 06:51:14.0500 (UTC) FILETIME=[C8892840:01C913DA]
Date: 11 Sep 2008 12:21:14 +0530
C: LIST 1
S: +OK 1 548
------------STARTING LINE------------
MESSAGE #1:
From: [email protected]
To: [email protected]
Subject: testing
SendDate: Thu Sep 11 12:21:14 IST 2008
CONTENT-TYPE: text/plain
This is plain text
------------TEXT------------
C: RETR 1
S: +OK
Received: from yyyyyy ([172.xx.xx.xx]) by xxxxx.xyz.com with Microsoft SMTPSVC(6.0.3790.3959);
     Thu, 11 Sep 2008 12:21:14 +0530
Message-ID: <3373112.1221115884647.JavaMail.284528@yyyyyy>
From: [email protected]
To: [email protected]
Subject: testing
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Return-Path: [email protected]
X-OriginalArrivalTime: 11 Sep 2008 06:51:14.0500 (UTC) FILETIME=[C8892840:01C913DA]
Date: 11 Sep 2008 12:21:14 +0530
------------TEXT------------
******************MESSAGE ENDING LINE*****************
C: QUIT
S: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.6944.0 signing off.

Version 33, problems when moving tab to new window, then if you open a new tab in that window it doesn't switch to it unless you use Ctrl-Tab?

Version 33, problems when moving tab to new window, then if you open a new tab in that window it doesn't switch to it unless you use Ctrl-Tab.

Type '''about:preferences'''<enter> in the address bar.
Select '''General.''' Look for '''Tabs.'''
Turn on '''When I open a link in a new tab, switch to it immediately'''

Problem while sending the message using RWB

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

Dear All,
I am facing a problem while sending a message from RWB. I sent the message using Test Message in component monitoring, it says message sent but I am not able to see any message in sxi_monitor.
When I send the same message using the http client it successfully processed by XI and I can see the success message in sxi_monitor.
Please let me know if anyone has face similar kind of issue.
Thanks,
Alok
Edited by: Alok Raoka on May 26, 2008 5:08 PM

Yosemite: Mail folders moved and messages disappear

OS X 10.10.1 on a Mac Mini 2.6 GHz, 8gb RAM, 1tb HD, Gmail setup as IMAP in Mail, personal mail folders sorted alphabetically
Intermittently while moving Inbox messages to personal folders, or opening messages in personal folders, the folders will drop to the bottom of the folder list and messages within the folders will disappear. Rebuilding the mailbox will usually make the messages appear, however the personal folders have to be moved back to their original positions. These instances have occurred frequently enough to be annoying and time wasting. Please advise. Thanks.

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

I keep getting "Problem during delivery processing" messages

This morning I started getting "Problem during delivery processing" messages like this one...

Same problem here. And i can't fine apple support contact for submit this problem. Bad bad bad bad support page appe .

Having problem with purchases. Message is saying my billing info is incorrect

Having problem with purchases. Message is saying my billing info is incorrect

Make sure your payment information on your iTunes account matches with your bank's. If it's correct and you still cannot purchase, you'll need to contact support and have them check your account.
http://www.apple.com/support/itunes/contact/
Cheers!

Problem in moving my messages

Similar Messages

Maybe you are looking for