Problem in MRP RUN

Hi,
We are maintaining one field in suppose MRP field in MRP1view as "X".
In Enhancement, we develop logic like that if in material master MRP field value equal to "X", then while creating reservation,system automatically create a PR along with reservation.
Now My Problem is -
I created a material with MRP field as "X", MRP type as ND.
i created a resrevation for this material,system will generate PR no. 10000002.
Now i am changing MRP field as Blank, & MRP type as PD.
if now i am running MRP,system will generate again a new PR.now i have two PR for the same reservation.
i also tried in t-code MD03, planning parameter as 3 (delete & re-generate).
so now i have two PR against a reservation,if i am checking in MD04.
so how can we control this situation,so that only one PR can create against one reservation.
OR can we exclude that reservation / storage location for MRP,then my problem will solve.
Thanks
Pavan

When you make enhancements you are taking responsibility that all scenarios are covered, and should not expect a solution from standard SAP.
Change the nhancement in such a way, that when you try to change from X to blank, system will issue a message saying that Preqs exist, and thus will not let change before those are deleted.
This will prevent the double coverage issue.

Similar Messages

Problem with MRP running

Hello Gurus,
i have a problem with my product. lets take an example. my semifinished product abc is made up of a, b and c.
i have made them(abc, a, b and c) to use MRP type VB. i made palnning file entry and BOM and then i run the MRP.
I run single item multilevel MRP for semi-finished product abc, it showed me result in MRP running only for abc but not for a, b and c.
can u please tell me where i am making any mistake.
regards

Hi Maggi,
If you have used mrp run for single item,single level planning (ie) md03, it will plan only for that particular material & will not plan for the dependent material in the BOM.
If you run with t.code md02, MRP run for single item,multi level, all the dependent requirements will be planned.
Also VB is for reorder point planning. ie if you maint reorder level as 100 for a,b & c materials & if the stock goes below 100, say 50 Nos. for all the three material. Then procurement proposal(Pur req) will be created for 50 nos for all the material(a,b,c).
If you use MRP type PD, there is no question of reorder level, during mrp run system check the stock of the dependent requirements. If there is a shortage procurement proposal are created.
Regards,
Senthilkumar SD

Problem during MRP RUN.

HELLO, FRIENDS,
if i select mixed MRP in the material master with indicator 2 i.e.gross reqirement
for MRP run ,but after taking MRP run through md01 .its not exploding dependent requirement of its component.Is there any setting for this?
lpease give solution
regards,]mangesh

Hi,
Check with t.code CS11 & check the result whether BOM is exploding or not.
Then check in t.code OS23, whether mrp exlosion is activated or not.
Check the BOM usage used while creating the BOM.
Regards,
Senthilkumar

Alternative BOM problem in MRP run

Hello Experts,
We have two BOM for one material.Now I want to use BOM-1 for MRP run & BOM-2 for subcontracting.I have maintined following settings.
1) Production version.
2) BOM explosion selection method in MRP4 -2
3) Assign PV in inforecord for subcontracting.
4) Assign PV in MD61 in schedule line .
But when I run MRP it still consider subcontracting BOM.Have I missed any setting?
Kindly guide.Thanks you.

Hi, Follow the below process,
1.Enter the BOM selection method as 2 in the MRP4 view of the material master.
2.In case if you have not assigned the production version in MD61 against the PIR's under schedule line
tab key (in the top menu click on settings and prod version ,then you can assign the prod version which
you need to pick during the MRP run),the system always picksup the first production version during
MRP run even if all the prod versions contains the same validity dates and lot sizes.
3.If you are not willing to assign the prod version in MD61 ,but the system should consider the second
prod version for MRP run means,then set the locked status for the first prod.version.
4.When run MRP via MD02 or MD50 in the simulation mode.(i.e w/o giving tick in simulation mode).
Click on Save,You will get a pop screen,
Now click on the continue icon, Then go to Plaining Results: Individual lines screen.where you will get Plan order on which when double click you will get pop screen below,where you have Planned order no,quantity,plant,storage location,and version.
Now here you can select the required version,and it will become firmed. This BOM will be used in the order now. Try it.

Dates problem in MRP Run

Hello
i m running mrp using zpp_md50 is the zprogramme for running the mrp for all the line items in one sales order, after running the MRP, whatever the pur. req. generated we will convert it to PO, but client need one release statergy here so that they can take the assurance from the suppling plant that whatever the date mrp run showing is that plant is really able to supply the goods on that date or not.
1) if suppling plant is not able to send the goods on the requested date in that case receving plant should be able do the amendment (change) in dates in their panning so that they can give the new delivery date to the customer?how to achive this?
2) They also want when we run the MRP, system has to consider the unrestricted stock present for the sales order line item,but without giving the sales order ref. using 412e to sales order.cause their r huge no of line item in sales order.
3) my client is not able to achive the customer date so it is very imp to do the amendment in mrp dates cause the dependacy is on the supplying plant & the suppling plant can produse only taking material grades of the same item at a time & it is not possible for suppling plant to produce as per the delivery date of the order.so the date in master ie. in house production date maintain is not really going to be follow, as the plant is critical, plz suggest some solutions for this also?
Regards
Nishj.

Nishj,
Wow. Substantial requirements. Let me see how many of these I can help you with.
i m running mrp using zpp_md50
Please understand that that program is custom to your system. It will be hard for us to comment on it's workings.
they can take the assurance from the suppling plant
It seems that you are selling the product from one plant but manufacturing in another
if suppling plant is not able to send the goods on the requested date in that case receving plant should be able do the amendment (change) in dates in their panning so that they can give the new delivery date to the customer?
This is standard in SAP. Basically, the suppying plant will create a supply element (production order, process order, perhaps in conjunction with a Stock Transport order) to move the parts to the selling plant. Once this element is in place, someone from Sales or another appropriate functional group will re-ATP the sales order. The sales order will then re-confirm against the new, more accurate dates.
They also want when we run the MRP, system has to consider the unrestricted stock present for the sales order line item,but without giving the sales order ref.
This can be achieved easily, by not using a MTO strategy. If you use strategy 40, Sales orders ATP, and all MRP calculations, will make use of all unrestricted stock. If there then is NO sales order stock, then this means that ALL stock is included. Just avoid any MTO strategies throughout your BOM.
There is no standard SAP functionality that will include Sales order stock and unrestricted stock simultaneously for the same part for the same requirement.
my client is not able to achive the customer date so it is very imp to do the amendment in mrp dates....
I am not sure what you are asking for here. You have stated the solution: The supplying plant does their research, and they then create a supply element with the realistic dates. The Sales order ATP check will then re-confirm to those dates. MRP will also run using those modified dates.
Rgds,
DB49

Problem in MRP run with Project/WBS Element

Dear PP Gurus,
I want to run MRP thro Project/WBS Element.
I have created WBS Element & WBS BOM for Material. Then created sales order for that material and assign WBS element to sales order.
Maintain Planning Strategy 21 ( Make to Order/Project) for Main Mtl.
Now when I run MRP with MD51 then no requriements are generated for main material and its components.
Is there any thing missing from PS-PP & SD point of view?
Pl guide me for the same.
Thanks in Advance.
Umesh

Dear Nagrajan,
Thanks for your reply.
There is no safety stock & un-restricted stock of that material.
Also I don't want to assign this mtl to that wbs Network. If I assign the Material to WBS network then network req.is generated and thro Normal MD02 MRP generates the requirements.
& in the plan order it will not show WBS Element
But My req. is I want to run MRP with MD51 & want WBS element as account asignment tab in plan order & production order too.
IS there any config. missing from PP/ PS / SD ?
Pl guide me for the same.
Thanks ,
Umesh

Problem in MRP Run (MD01)

hi experts,
       There were some MRP controllers were assigned for User exit in SPRO for planning run (T code :- MD01 ). Now i have defined additional MRP controllers and also assigned them for user exit (in SPRO) for planning run.
       With old MRP controllers defined as user exits , Planning run is considering materials with only particular MRP controller.
        But for these newly defined MRP controllers , user exit is not restricting planning of materials with only particular MRP controller and materials planning is carried out for all materials with newly defined MRP controllers.
     please help me out
thanks in advance
rgds.
jai

hi experts,
   No one has answered my query yet. please reply
rgds,
jay

MRP Run - Planning file entry Issue

Dear All,
We are facing one problem in MRP Run. We run MRP in the background for a plant (MDBT) System is not creating planned order for few component. I have checked all relevant setting. I found that planning file entry is missing. I would like to know that how system can miss the material? How system creates & delete planning file entry ? I have some data related to this.
Last MRP run date is 22-04-09
PIR changed date on 30-04-09
MDRE Run on the 30-.4-09 at night.
MRP Run on 02-05-09 at night.
Problem reported that no planned order for the material on 07-05-09.
We have huge number of material so its difficult to check all material individually whether MRP run happend or not ?
Please let me know the possible reason for this.
Thanks & Regards
Kundan Kumar

Dear,
If you carte materaial or uplod materail before activation plant for MRP this may be the cause for this.
Planning File creates all the materials relevant for the planning run.
The planning run and the scope of the planning run (which materials are planned in which planning run) are controlled by the planning file.
For planning file entry use the following transactions,
MD20 : Create planning file entry
MD21 : Display planning file entry
MDAB : Set up planning file entry in background
MDRE : Check planning file entry Please run this in it will solve your problem
All materials assigned with MRP are automatically entered in planning file entry.
Depends on changes in material planning or in proposal , system will create planning file entry.
When MRP run system will consider only which materials having entry in above contents of planning file entry. After MRP run system delete the planning file entry. And again material gone the changes like GI GR on any other demand then system generate planning file enty again.
Hope it will help you to understand basic concept.
Regards,
R.Brahmankar

STO Not to be considered in MRP Run in MTS

Dear All,
We are facing the following problem in MRP run in MTS scenario when
there are STOs in Plant.
We have 2 Plants one is production Plant (Say A) and other is Non
production Plant (Say B) from where only Deliveries will be made.
Now after final material will be produced in Plant A it will be routed
through Stock transport order (STO) to plant B.
So there will be always STOs in Plant A which will be created in Plant B.
Now we are using Strategy 11 (Gross req. Planning) for Final FERT material.
In MRP if we have PIR of 100 Qty. and STO of 50 Qty. system is creating
the Planned order of 150 quantity which is a normal system behavior.
Now our requirement is that it should not include STO in Planning (MRP Run).
Pls. Suggest.
Regards,
Vinayak.

Hi,
Go to OPJJ,
In that select your requirement type, and click details...
there is a tab,IN/OUTward movement.. In that deselect the box for incl.rel.order.reqs..
If you dont want the deliveries to be taken into consideration, then uncheck thebox for include deliveries..
hope this solves..
karthick

Problem with Back ground MRP Run (MDBT) or MD01

Hello SAP Experts,
Issue :- Material is not considering during Automatic back ground MRP run ( MDBT or MD01)
But when we run MRP in forground (MD02) system is considering the material.
we have checked both the selection parameter are same for MD01 and MD02 .
can you help us on this issue ?
Regards
Mahesh

Hi,
Problem is due to entry in Planing File is missing for that Material.
Go to MD21 and check whether Planing File entry is maintain for that Materiel.
If not then maintain it by T.code MD20 (Manual) or you can do it by using back Ground JOB - OMDU.
Regards,
Dhaval

MRP run problem

Hi experts,
During MRP run for a material , open PO quantity is not considered If delivery date mentioned in that open PO exceeds 110 days from planning date(MRP run date). If it is less , it considers open PO quantity.
MRP type = V1 (Reorder point planning)
Lot size = HB
planned delivery time = 0 days
What could be the reason for it? Pls help me out.
Thanks in advance,
Rgds,
jay

When u keep your planning horizon 100 and in MD02 if ur using NETCH planning then system will consider the planning in between 100 days only If your open PO in out of planning horizon then it will not consider for the same.
If u want to do the same u have to go for increase ur planning horizon time in OPPQ.
whatever u required.
Kind Regards,
Nilesh

MDBT : MRP RUN Problem

I have one storeage locaion for which i want to tun MRP run in backgruond .
Now i have cerated MRP area (STORE) as stoarge location asssigne th erespective storge location there.
Now i created scop of planning & i assigne tthat MRP area as "STORE"to scope of planning.
Now cerated varaint as "CONSUMPTION"and in scope of plalning i selcetd the scope of planing as my MRP area and saved the variant .
Now all material under this area are cinsumption baed material means everyone has MRP type as VB, reordre point and lot siza as HB, max lot qty and STORE as MRP area in material master.
NOw in MDBT i selcted the variant and click on start inmmediate i m getting mesage as "Request with variant CONSUMPTION Started"
If i see MD04 til no requirenment is genrtaed with this Run ??
1. Please tel ..where i ned to corect
2. Is there any mesage after background MRP executed ;like in MD02 planning result screen .

Dear,
Please check whether planning file entry exists in MD21 also check MDAB & MDRE ?
or run program RMMRP000.
Please note With MRP type VB (Manual Reorder Point Planing) system will not consider Dependent requirement or any other reservation.
It will take care about only Reorder point.
If You have set reorder point of 100 Nos.
And dependent requirement is of 35 Nos , and available stock is 90 Nos. then at the time of MRP run system will generate PR of 10 Nos only just to cover that less qty than the reorder point of 100 Nos.So there is nothing wrong in your case.
If you want to concider Dependent requirement also during Planing run then you have to change MRP type VB to PD then check.
Regards,
R.brahmankar

MRP Run Problem With Shipment Notification

Hi Experts,
Issue
In MD04 i have 1 shipment Notification,but after MRP Run it should get display in MD05 but in my case it is not happening.CAn anybody tell me the possible causes / reasons why this is happeinig.
Awiitng for your quick response
Need any furher inputs please revert back to me immediately.
Cheers,
Kumar.S

Hi karthik,
Thanks for your reply,even i know Md04 is Dynamic and MD05 is static,also i cant able to clearly understtood what u r telling,
Kindly check whether shipment notification is updated during the 2nd run then it wont reflect in MD05
but when i check the same scenario in Q shipment notification getiing updated but not in prdn.
Pls clarify
Cheers,
Kumar.S

MRP running problem

Hi gurus,
When i try to run the total MRP in MD01, i can see that only certain material is being run, and most of it are not run.
So, when i go to MD05 to view the MRP list, i can see that the material is still in old date MRP run date where the stock qty is wrong.
I tried to go to MD02 to run that particular material, then that material is updated accordingly.
Any one has any idea what had happen?
Why when I run in Md01 some material is not picking to be run?
Thanks!

I've check in MR21, i found that planning file entry is there. But i can see some of the material that is not run do not have NETCH set.
How do i make the material as NETCH set so that when i run the MRP in MD01 it can run it as well?
Infact i try to create the planning file thru MD20 the entry is created but most of are not set as NETCH, why it can happen in such a way? (My processing key is NETCH when run MD01)
Does it mean all the materials must have set as NETCH then only it can run the MRP?
But i found some of the material do not have the NETCH set but when i try the total MRP run in MD01 it still can works?
What is the reason behind?
Please help, thanks!

Order of delivery schedule line counter at schedule agreements from MRP run

Currently we are using schedule agreements for our long term external suppliers, but we are facing a problem with the order of new delivery schedule lines created during MRP run.
Because of master data settings like, lot size, rounding value, plan delivery time and planning time fence to set as firm new requirements, multiple schedule lines are created with no order for schedule line counter.
Does anyone is aware of a BADI, user exit or customizing control to have this schedule line counter in order?
Thank you
Daniel Guillen
IT
Skyworks Inc.

Hi,
Pls put this query in SD fourms and get immly help because this is technical fourms.
Anil

Problem in MRP RUN

Similar Messages

Maybe you are looking for