Problem in MSS Approve Timedata application-Overtime approved twice

HI,
      We are using ESS & MSS packages in our projet. We are facing a strange problem when approving time sheets under MSS. For a particular user, timesheets got approved twice. Employees cannot enter time sheets twice for a day.
           When MSS user approves time sheets, application freezes for some time showing revolving circle on the screen. User needs to logoff the portal and only able to login after some time.
           In our case, employee is entering timesheet data only once in a day and manager is approving it only once but in backend, the records are saving twice.
               Any idea why this happens? Is it a portal related issue or a backend configuration issue?? Suggestions and solutions will be very helpful.
Thanks & Regards
Pavan

Dear Smit,
We are implementing E-recruitment in our Project. We are facing problems with Manger creating requisition page. Its always displaying NO data available.
Can you please let us know if any configuration is to be done for it?
Thanks a lot in advance,
Regards,
Sai

Similar Messages

  • Adding a column in the MSS Approval view

    What are the options for adding a column in the MSS approval view (CATS regular) ?

    there are lot of colums available in cats customisation for this
    Please check
    In the IMG (transaction SPRO), go to
    - SAP Customizing Implementation Guide
      - Cross-Application Components
        - Time Sheet
          - Specific Setting for CATS regular
            - CATS regular
              - Approve Working Time
                - Define Field Selection for Individual Approval View
                - Define Field Selection for Detail View
    Here you can assign lot of columns to your profile
    which is easily customisable

  • MSS approval Working time

    Hi gurus,
    We are using MSS 1.0 and EP 7 .I have a small problem.For the approval working Time we are using task TS20000460 task and we modified it based on the requirement of the client .Now we have discovered that when manager approves the time in MSS , the infotypes are updated automatically which the client does'nt  want that to happen.Is the MSS approval will work the same way or it's because of workflow.Is there any setting to be done so that when the manager approves it the update will go into the CATSDB table but not the infotypes.
    Reply is needed very urgently on this.
    Thanks in advance.

    Hello,
    You need to update the CATSWF transaction not to transfer immediately.  Also in the approval profile for the iview SAP_Line uncheck the box to transfer immediate.
    Hope this helps and maybe by now you have found your answer.
    Maritza

  • MSS Approval Report Links to Busines Workflow Task in UWL

    Hello All,
    I have a scenario below that I'm hoping you can help.
    I copied the standard business workflow task "TS31000007: CATS Approval by Supervisor" to create our own task (general task) and link the 'CatManagerApprove' application and 'sap.com/msscatapproval' package to this task in the Workflow Visualization Configuration.
    We then assigned this new task to the time data entry profile for the portal.  Once, employee released the working time, the task is created and send to the Universal Worklist. 
    The manager can then access the UWL and open this approve time workflow task. This task is open to the MSS Approval Report (similar to what appear under the MSS > Tasks > Approve Time by Manager).
    However, I have copied the Approve Time by Manager to our own and changed some of the  order of the column and header text and assigned to the MSS role. 
    I would like to have this CATS approval task open to the same approval report view/layout as in the MSS Approval Report.
    I've tried to change the layout (column order) through portal contents of the standard MSS Approval Report because I thought it was reading from there, but it's not.
    Does anyone know how this can be done or where to point to the MSS Approval Report on the portal.
    Any help would be appreciated!
    Tam

    Hi Karri,
    We were able to use the launch iview task to launch our specific iview but I cannot seem to get it to recognize the workitem. In other words, when I click on the task in the UWL, my approve working time iview appears but it does not have the data that is from the workflow task item. Attached is the XML code that I used:
    <ItemType name="uwl.task.webflow.TS93000001.SAP_ECC_Financials" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchIView" executionMode="default">
          <ItemTypeCriteria systemId="SAP_ECC_Financials" externalType="TS93000001" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchIView" groupAction="" handler="IViewLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
              <Properties>
                <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
                <Property name="page" value="pcd:portal_content/net.saccounty.SacCounty/net.saccounty.approve_ts_data"/>
                <Property name="openInNewWindow" value="yes"/>
                <Property name="display_order_priority" value="5"/>
                <Property name="workitemId" value="${item.externalId}"/>
              </Properties>
              <Descriptions default=""/>
            </Action>
          </Actions>
        </ItemType>
    I thought the line <Property name="workitemId" value="${item.externalId}"/> would pick up the work item ID, but it is not working. Any suggestions?
    TS93000001 is our task. approve_ts_data is our iview. It opens in a new window correctly and goes to the correct iview, just is not the actual task data.
    Thank you,
    Mark.

  • Employee Search in MSS Approve Time Sheet Data

    Employee Search in MSS Approve Time Sheet Data (Net Weaver Portal 2004s)
    In MSS we need upper level managers to be able to approve time for employees who reside in lower level org units and are not the manager’s direct reports.  This is usually the case when the chief the employees do report to directly is absent.
    In the MSS Team view the links General Information, Compensation Information and Personnel Development have an Employee Search iView with a dropdown containing options for Direct Reports, Employees from Organizational Structure, Employees from Organizational Units and Employee Search.  We have been told that in previous versions of MSS that functionality existed in the Approve Time Sheet Data iView as well which would appear to solve our problem.
    Is this functionality available in Approve Time Sheet Data and if so how is it configured?  Or is there another way (other than manipulating the org structure) for managers to view non-direct reports and approve their time?

    Hi Mani,
    It is a good thing you have found this post, as it demonstrates that you put in some effort to search for similar posts to your problem.
    However, if the post you found is like 3 years old and there are no replies, chances are the guy did not find a solution or isn't visiting here anymore. So it might be a good idea to raise a new post, to increase you chances of getting some answers.

  • MSS Approve Time sheet data error

    Hi,
    In MSS Approve time sheet data I get a
    The ASSERT condition was violated., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: The ASSERT condition was violated., error key: RFC_ERROR_SYSTEM_FAILURE
    at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
    at com.sap.xss.hr.cat.approve.blc.FcCatApprove.rfcExecute(FcCatApprove.java:307)
    at com.sap.xss.hr.cat.approve.blc.FcCatApprove.init(FcCatApprove.java:276)
    at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApprove.init(InternalFcCatApprove.java:243)
    at com.sap.xss.hr.cat.approve.blc.FcCatApproveInterface.onInit(FcCatApproveInterface.java:136)
    at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface.onInit(InternalFcCatApproveInterface.java:133)
    In spro I have configured
    Approval Mode MSS_LTV_EE
    CATS Approval MSS_LCA_EE
    Request Mode ESS_LEA_EE
    Team View Mode MSS_LTV_EE
    I have added pernr and name in the fields selection
    Following is the st22 dump
    Error analysis 
    The following checkpoint group was used: "No checkpoint group specified" 
    If in the ASSERT statement the addition FIELDS was used, you can find 
    the content of the first 8 specified fields in the following overview: 
    " (not used) " 
    " (not used) " 
    " (not used) " 
    " (not used) " 
    " (not used) " 
    " (not used) " 
    " (not used) " 
    " (not used) " 
    Regards
    Srini

    Srini,
    This thread might be handy.
    ESS, Employee Search error: The ASSERT condition was violated
    Good Luck.
    Sandeep Tudumu

  • What out-of-box actions initiated by HR go through MSS approval?

    Hello,
    I'm new to HR, and have been asked to find out what out-of-box actions are there that can be initiated by HR (not employees, but HR employees), that will go through a MSS approval process?
    For example: Retention Payments are initiated by Comp Analyst; then approved by employee’s Manager, HR Manager, Compensation Manager; then sent to Payroll.
    Are there other processes/actions like this that exist? E.g. initiating a spot bonus.
    I appreciate that we can build anything we want. What we would like to know is what's seeded?
    I also appreciate that this question is a little open ended, but if anyone can point me the right direction that would be a start. There is mountains of documentation that I have to plow through.
    Regards
    Dave

    Hi,
    Seems to me the quickest way for you to get this information is to review the AME transactions for SSHR or whichever module you are looking for.
    Regards,
    Vinayaka

  • Problems building a stand alone application with LV 8.6.1.

    I'm having problems building  a stand alone application with LV8.6.1. I'm using a USB- 6008 DAQ and USB-6501 Digital device in the application. I already have an simple executable on the machine so the Run time Engine is already installed.  For the USB DAQ device, I assume I need to include the DAQmx8.8 as one of the installers. When I attempt to build the application, I'm prompted for several disk, one being a distribuition disk 1. I have the installation disk for the developer package. I did not  see a distribuiton disk as one of the installation disks. When I insert disk 1 I get an error that another application is trying to run. Could someone tell me which installers I need to include and where do I find the "distributor" disk.
    Thank you,

    are you building installer for the first time on this PC?...It usually asks for the drivers CDs and some toolkits if required.
    you just need to use drivers CDs (comes with LabVIEW) from which you installed on this PC. If you have ever upgraded drivers, then you have to use the latest CDs only.......
    another issue may be ...when u insert the driver disk, it has autorun, it will launch drivers installation wizard....close that and then try to build distribution......... 
    Message Edited by Anil Reddy on 09-25-2009 01:22 PM
    Anil Punnam
    CLD
    LV 2012, TestStand 4.2..........

  • I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

    I suddenly encounter this error message from Fire Fox.
    Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
    I uninstalled the browser and download a new version but it does not resolve the issue.
    I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
    == This happened ==
    Every time Firefox opened
    == After something about security add-on of Norton pop up by itself. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

    This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • New WIN7 System, FFox gives error "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory" - will not go to any site.

    New Windows 7 computer. After installing Firefox, every time I bring it up I get the following message:
    "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
    Then Firefox comes up, but will not function at all - can enter url address, but will not respond to ANY clicks, so can not go to any site.

    This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • This message [Ubuntu repositories or Mozilla download: " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory....

    Ubuntu 11.04: I have been getting this message whenever I install Firefox from the repositories and downloading the tar file. I cannot use Firefox! " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."Firefox does not respond to any addresses or a google search. Indeed it responds to nothing. There is no Profile folder!

    Uninstalling Firefox on Linux
    * http://kb.mozillazine.org/Uninstalling_Firefox#On_Linux
    * http://kb.mozillazine.org/Installation_directory#Linux
    * Removing user profile data - http://kb.mozillazine.org/Uninstalling_Firefox#Removing_user_profile_data
    After all is done, Restart your system.
    Installing Firefox on Linux
    * https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Linux
    Check and tell if its working.

  • When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

    When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
    == This happened ==
    Every time Firefox opened
    == Two days ago, for no apparent reason.

    In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
    Open Finder and use one of these:
    * Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
    * Open the "Go" menu and hold down the Option key to make the Library appear
    You can also use this command in a Terminal window to remove the hidden flag.
    * Mac HD > Applications > Utilities > Terminal
    * chflags nohidden ~/Library

  • Problem in downloading and installing application ...

    hey
     m havng problem in downloading and installing application on mah x2-01 . many times i tried to dwnload whatsapp to mah phn and if the application isz downloaded thn while verifyng the no. it says error unitterupted problem in contacting the server . so knw wht shud i do . i hav also restrore mah phn thn too. plz help me 

    You may verify first your mobile number from this link. Make sure to sign in and under Mobile numbers, click Verify now. 

  • Problem with MSS Launchpad

    Hello folks,
                    We are facing some problem with MSS Launchpad after the service pack, we have checked sicf, lpd_cust and done most of the troubleshooting steps,reached to point where we found table  T77MWBFCD and changed the URL value here, launchpad worked but the URL which we want to work and which was working fine in the past has stopped working.
    Any help will be appreciated.

    Hi everybody,
    finally we managed to fix this bug on our own.
    We set up the Managers Desktop (MDT) as suggested by SAP. But the MDT's reports could not be converted to the launchpad.
    Then we recognized via debugging that for any reason the following entries were missing in table FPB_LP6_SNI_REQ:
    - Role ROLE C 3 MSS
    - Instance INSTANCE C 3 REP
    Adding these entries manually fixed the problem.
    Regards,
    Dennis Bohlmann

  • URGENT : Problems with exporting a translated application

    Hi ! I have a problem with exporting a translated application. Effectively, I exported both applications (The normal and the translated version). I want now to apply the translation XLIFF. I want to know if it is possible to apply my old XLIFF file. The problem is that I can't select the same ID for my application.
    I really have problems!
    Anyone can help me ?

    When I import the translated version, the translation works a little bit. Effectively, all my reports appear but there is no item that appears.

Maybe you are looking for

  • My Ipod Touch 4th Generation wont connect to Itunes anymore

    I have an Ipod touch 4th generation and suddenly it wont connect to my itunes anymore. It will connect to the computer but the device isnt shown on itunes. I cant sync my ipod up with any music or apps or even transfer pictures from my ipod to my com

  • Need help in passing data from one page to other page in oaf

    Dear All, I have a requirement as below. I am doing some selection in one page and populating the data in another page table region, next time when i am selecting another row and pressing the button i need to display the previous row as well as new r

  • .sh file usage log entries multiplied

    Hi all, I have a very strange problem: In order to find out what parts of a big application being used, I have added the following line as the first executable line in every .sh file: /application/sh_log $0 The file sh_log looks like this: now=$(date

  • How to fix flickering in actionscript?

    I have a problem making my FLASH working seamlessly. When you put the mouse over the buttons (movie clips) then they are flickering. Do you know how to fix that? I want everything to work smooth and slow, without flickering and flashing in the eyes.

  • Print Photo from wireless

    When I print a photo wirelessly from the test it prints correctly.  However, when I choose to print a photo outside of the setup it prints on paper instead of the photo paper.  I check 4 x 6 print on HP Premium Paper. What am I doing wrong?