Problem in multilevel automatic packing

Dear All,
I am facing problem in Multilevel Automatic Packing of materials. I have done settings of the packing transaction profile; define check profile for packing status and of packing instruction determination in customizing. I am able to packing material upto 1 level only.
I have already created packing instruction using T-code POP1 and also created subordinate packing instruction for packing handling units in next level, assigned this to packing determination record using T-code POF1. I have used 1st packing material as main material in next packing instruction and the larger size material as next handling unit. The settings are:
POP1
PI 1
P 214 Target Qty 1
M 22   Target Qty 1
I  5     Target Qty 2
PI 5
P 215 Target Qty 1
M 214 Target QTY 2
POF1
Determination record ABCD
Material 22 PI 1
I also tried different condition type for this process but didnt succeed
I am not getting any error, just receive a message Handling units were created. But when I try to pack handling units using automatic packing option then system prompts me msg that there are no items to be packed.
Kindly give me solution.
Regards,
Anand Malu
Jr. SAP SD Consultant

Hi,
I want to pack 1 medicine box in 1 small carton and then 10 small cartons in 1 Large Carton. I am able to pack 1 medicine box in 1 small carton thru automatic packing but not able to pack 10 small cartons in 1 Large carton. For this I have maintained packing instructions which are:
Packing instruction 4
Item no.   Item Cat.   Component   Tgt qty   Min qty   Round qty  unit of measure Load carr MixID
10             P             214                 1               0           0                 Carton            Yes        No
20             M            22                   1               1           0                  Box                No         Yes
30             I              5(Pack instr)    20             0           0                  -
If I maintain Min. qty 1 for item no. 30 then I get error while packing "Min. qty from packing instruction not reached packing not possible"
Packing Instruction 5
10            P              215                1              ---             --              Carton               Yes        No
20            M             214                20              ---            --               Carton               No         Yes
Packing Instruction determination records
Determination type   ABCD
Material                         Packing Instruction
22                                 4 
Packing determination procedure contains determination type ABCD only.
Regards,
Anand Malu
Jr. SAP SD Consultant
Edited by: genius_anand on May 2, 2009 8:38 AM

Similar Messages

  • Automatic Packing at Delivery level using PACKMODI

    Hello Friends,
    To activate the automatic packing at delivery level without any packing instruction the PACKMODI enhancement can be used.
    Am i Right??
    If so Kindly share some inputs how to used this Enhanacemnt
    It includes 3 User Exit.
    There is no documentation provided for it.
    Pl can any one explain its functionality
    and how it is helping to packed automatically at delivery level

    This is the doucmentation for this enhancement:
    The extension PACKMODI contains user exits for automatic packing.                                                                               
    As of Release 4.6C, the packing instruction determination and packing  
    according to packing instruction functions are available for automated 
    packing. New user exits in the form of  BADIs were created for automated
    packing to add data to the packing instruction determination function or
    to have the packing instruction that is to be used appear as a default.
    The class for automated packing is called BADI_HU_AUTOPACK.                                                                               
    Generally, customer functions after 4.6C only exist in order to be     
    compatible with previous releases. If you want to implement your own   
    automated packing logic, you should only do so by way of this new class.
    It is not necessary to use packing instructions in order to implement  
    your own automated packing logic.                                                                               
    Therefore, the previous sample routines for filling in customer        
    functions no longer exist.                                             
    Regards,
    ravi

  • ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate

    ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
    1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
    TABLE NAME - EMP
    Item Containing PRIMARY KEY - P2099_EMPNO
    Primary key column - EMPNO
    By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
    2) Created a HTML region. Within this region add
    text item P2099_FIND_EMPNO
    Button GET_EMP to submit
    Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
    If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
    I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
    EXIST (SQL query returns at least one row)
    select 'x'
    from EMP
    where EMPNO = :P2099_EMPNO
    But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
    Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
    Any ideas?
    Thanks Pete

    Hi Mike,
    I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
    0.05: Computation point: AFTER_HEADER
    0.05: Processing point: AFTER_HEADER
    0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
    0.05: Show ERROR page...
    0.05: Performing rollback...
    0.05: Processing point: AFTER_ERROR_HEADER
    I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
    Thanks Pete

  • HT1414 how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then re

    how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my  back up the operating system was ios 6.1.2..

    Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?

  • Automatic packing for sales document

    Hi all,
    i have created a sales order with BAPI BAPI_SALESORDER_CREATEFROMDAT2. Is there a BAPI or a FM that generate automatic packing for the items in the sales document. I want something like VA02, extras | packing proposal, Automatic packing.
    Regards
    Roberto

    Hi,
    I am in dire need of understanding how to activate packing in sales order.
    Can you please help me?
    Regards,
    SAP lover

  • Automatic Packing Via IDOC

    Hi,
    As we are creating an Inbound delivery via IDOC, is there any settings to be provided in DELVRY05 idoc to let SAP know that it needs to do automatic packing.
    The issue here is when we create Inbound delivery manually, the packaging is done at different hierarchy level in the packaging screen.
    Whereas via creating through IDOC, we are able to get it done only at hierarchy level 0.
    You can check in EDI-PACK-TTL Content(Display HU screen)
    Doesn't standard SAP handle this via IDOC function module.
    Regards
    Krish

    Hi Sam
    You may want to investigate if you can use BAdi 'IDOC_CREATION_CHECK' to prevent the idocs from being created.
    Just use method IDOC_DATA_CHECK and clear the CREATE_IDOC flag based on the IDoc Type.
    Cheers
    Alex

  • Errors in Automatic packing

    Hi experts,
    I Configured Automatic packing with packing instruction for my client and now getting 2 errors like In line 1 loop no packing proposal data could be determined and another error is No packing instruction found for material, While I maintained condition records for Packing instructions in POF1 & also created Packing instructions in POP1 Tcode.
    Please suggest.
    Regards,
    Shaktiprasad Dash

    Have maintaintained packing material type in Material master basic data.Please maintain then system serch as per basic data screen.

  • Automatic packing with Usage

    Dear All,
    I am working on Automatic Packing,where user can select Packing Instructions. But I am getting this error In the  1 loop, no packing proposal data could be determined ,MESSAGE CLASS      HUGENERAL , NO     107
    No packing instruction could be found for material 760310205098, MESSAGE CLASS VHUPD , NO 2
    I have maintained Packing Instructions in T-Code : POP1.
    I have maintained  Packing Instructions Determination in T-Code : POF1, Determination Type is SHIP  and Key Combination is Material/Ship to Party / usage
    In Delivery I am able to select required Packing Instruction and Usage as "M-Sample" , by selecting one option and executed Automatic packing the above said error accord.
    Please provide a solution.
    Regards

    Dear Ilango R V.
    Thank you very much for your reply. In Material Master > Sales General/Plant TAB , configured Matl Grp Pack.Matls.
    I am doing Sample Sales for  Customers, So, my user required a option to select , required Packing Instructions in Delivery.
    As said in my previous question in Delivery I am able to Select required options , but when I proceed for Automatic Packing error message displayed.
    Regards

  • Error in Automatic packing

    Hi experts,
    I Configured Automatic packing with packing instruction for my client and now getting 2 errors like In line 1 loop no packing proposal data could be determined and another error is No packing instruction found for material, While I maintained condition records for Packing instructions in POF1 & also created Packing instructions in POP1 Tcode.
    Please suggest.
    Regards,
    Shaktiprasad Dash

    Hi Shaktiprasad
    To trigger output from Handling Unit please see the following configuration settings:
    1) SPRO > Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Handling Units
    Here maintain all necessary configuration based on business requirement.
    For triggering output at time of Goods Issue, first define proper Condition Table then define Access Sequence with reference to table and set Requirement field accordingly. Within Maintain Output Type assign the Access Sequence to the Output Type you are using. Finally, maintain & assign Output Determination Procedures.
    2) Inventory will get updated at time of Post Goods Issue at HU level, partial and complete quantities are supported.
    A. Posting Goods Issues for the Complete Quantity:
    Choose Logistics > Production > Production Control > Goods Movements > Material Staging > Goods Issue with HU
    Logistics > Central Functions > Handling Unit Management > Goods Movement for Handling Units > Goods Issue for Work Order
    Logistics > Material Management > Inventory Management > Goods Movement > Goods Movement for Handling Units > Goods Issue for Work Order
    Enter the order number and choose Propose HU.
    To post complete goods issues, choose <save>.
    B. Posting Partial Goods Issues:
    Choose Logistics > Production > Production Control > Goods Movements > Material Staging > Goods Issue with HU
    Logistics > Central Functions > Handling Unit Management > Goods Movement for Handling Units > Goods Issue for Work Order
    Logistics > Material Management > Inventory Management > Goods Movement > Goods Movement for Handling Units > Goods Issue for Work Order
    Select a HU and choose box icon.
    Change the quantity and choose <green check>.
    To change another item, continue as in step 3.
    To post the goods issues, choose <save>.
    3) You can decide per plant and order type whether partial goods issues are allowed. The setting in Customizing:Logistics General > Handling Unit Management > Basics > Production > Production Supply > Set partial GI Indicator.
    Regards,
    km

  • Automatic Packing

    Hi,
    We want to set automatic packing of finished material in following way-
    200pcs of finished material be packed in 1 tray, for 201 pcs,system should propose 2nd tray automatically.
    For automatic packing,  We have created determination record(POF1/2/3), packing instruction (POP1),packing procedure,packing profile,our main difficulty is that we could not establish the link to connect packing proposal to sales order /delivery note.How this can be done?
    Please guide,matter is urgent.
    Points will surely rewardwd.
    Regards

    Hi Mrunal Ambatkar
       Ensure the following for automatic packing
    - Have you assigned the Material Group: Packaging Materials for your FG material in the material master in the basic data1?
    - Have ur item category marked as relevant for packing?
    - Have your maintained all settings for the packing mateial proposal like Handling unit number ranges,Define Packaging Material Types,Define Material Group for Packaging Materials,Define Allowed Packaging Materials?
    Let me know what is the error your are getting?
    Regards
    Shiva

  • Automatic packing of delivery through BAPI or function module

    Hello,
            I have a requirement to invoke the automatic packing functionality of a delivery through a delivery output type as soon as the delivery is saved in the system. We have a delivery output type ZPAC with special function. I am looking for a function module or BAPI which satisfies the functionality so that I can plug it in the custom program I develop to drive the ZPAC output type. Any inputs will be greatly appreciated.
    Thanks,
    Giri..

    Thanks Mike. Appreciated ur answer.
    I am trying same function module "CBGL_LB61_LABEL_GENERATE" in SE37 to get a sense how it generate the file.
    But when i execute in different data combination, it never executed successfully.
    So do you have more info to execute this function module successfully.
    ex: I_label accepts a ID which is 4 digit. so which id it says here.
    Thanks again Mike. Let me know if you have more info on this.

  • HT1918 problem regarding an automatic subcription renewal

    i want to report a problem regarding an automatic subcription renewal to a third party, where do i go please?

    See Here...
    iTunes Store: Purchasing and managing auto-renewing subscriptions
    Contact the Content Provider
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Issue in Automatic Packing

    Hi All,
    Automatic HU packing Functionality for Material A was working fine till I had one PAcking Instruction created in POP1 & assigned it in POF1.
    Now I want to use same PAcking Instructions for Material B. So I assigned Material B to same Packing Instructions in POP2.
    Also Assigned Packing INstructions in POF2.
    But when I add Material B in the scenario both of them are not working.
    Can anyone pleaze help me.
    Many Thanks in Advance.
    Best Regards
    Hiren

    Hi Andre,
    Thanks for your reply.
    Your understanding is absolutely correct. And I also understood now that if the materials are different than there has to be different packaging Instructions & than assign it in POF1.
    Yes practically it is correct. but what if I have to use same Packaging Material for another material also? Should i create new Packaging Instructions in the system?
    Thanks Krishnan for your reply
    but there is no message as such. the problem is the material doesn't get packed automatically during INbpund delivery creation itself with the scenario mentioned by me in first message of this thread.
    Regards
    Hiren
    Edited by: Hiren N. Panchal on Nov 18, 2010 5:26 AM

  • Install failure due to "faulty DVD" problem: only with Family Pack?

    After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.

    I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
    Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
    Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
    In time it will sort itself out, but in the meantime the rooms are full of smoke

  • Run date problem in F110 - automatic payment program

    Hi.
    I am trying to run the automatic payment program in F110. I am facing the problem with the run date in this transaction. System is not giving me any error if i give the run date as today's date or future date.
    But in run date if i give previous date system is not executing the automatic payment program.
    Eg: Inovice posted on 01.01.2012. It becomes due on 01.01.2012. I gave run date as today's date 04.01.2012 or future date the system is executing correctly picking all invoices. But if i give the run date as previous to the current date i.e., 02.01.2012 or 03.01.2012 then system is not executing this transaction.
    This problem is coming for all company codes. So if there is any setting for restricting run date request you to help me in this regard where can i do such setting.
    Regards,
    Padmavathi

    Hi.
    My problem is solved.
    Actually client is entering the documents with posting date for earlier months whereas he has entered the documents this month.
    Therefore system is not picking the invoices in F110 - automatic payment program.
    Actually the run date entered is getting copied to the parameters entered i.e., posting date and documents entered upto date.
    Documents are entered in the system this month with posting dates of previous months. Therefore if i give the run date as this month date the run date is getting copied to doc entered upto date in the parameters tab as this month date. So only system is not picking invoices since invoices are entered in the system this month only.
    Now we changed the date for doc entered upto with previous month date and system is picking the invoices.
    Thanks a lot for your help.
    Regards,
    Padmavathi

Maybe you are looking for