Problem in New Repository Installation
I want to install the 9iDS SCM repository to 9i database. I follows the SCM installation guide using script method and pass the checking process but the following error still occur when installing the repository.
Connected to: Oracle9i Release 9.0.1.1.1 - Production
JServer Release 9.0.1.1.1 - Production
IMP-00002: failed to open C:\Ora9DS\REPADM61\ins\ckprereq.dmp for read
Import file: EXPDAT.DMP >
I could not find ckprereq.dmp and EXPDAT.DMP in my computer.
Any one could help me? Thanks a lot!
Regards,
Danie
Danie,
If ckprereq.dmp is not in repadm61\ins directory then your software install has failed. EXPDAT.DMP is the default. If no file to import is found EXPDAT.DMP is tried. Thus EXPDAT.DMP is not required as ckprereq.dmp would normally be found.
Also, have a look in the repadm61\logs directory for install log files.
David
Similar Messages
-
Problem with mobile repository installation
I have been trying to install the Mobile Server 10g on a windows 2003 box. It seems the repository doesn't install. If I run repwizard.bat and I put in the SYSTEM password I get "IO Exception: Bad Packet Type" I can use the same password to log into EM manager. So what is up.
I am a newbie with Oracle, coming over from the dark side of SQL Server.
PaulHi Paul S.,
Please let us know if you still need help with this post.
Thank you. -
I went to upgrade itunes and when it finally downloaded, i got the following message: There is a problem with this windows installer. A program required for this install to complete could not be run.
I was advised to unistall the old itune, which i did and then loaded the latest itune 10.5 i think. It dowloaded fine to a point and before finishing, it came up with the same message.
Is the problem with the itune installer or my windows installer on my laptop?Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
when I download the new itunes (on my pc); going through the dowload process it stop me and a window pops up and it says: (there is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.)
I have tried several times to redownload and keep getting the same message. what am I doing wrong...Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I can't download the new version of iTunes. Halfway through the installation a pop up window appears saying, "There is a problem with this Windows installer package. A program run as a part of a set up did not finish as expected. Contact your support personnel or package vendor.
Got exact same problem, was told to delete all old apple, quick time and bonjoir from computer then it would work. I use a programme called malware bytes and this takes everthing out of your computer right down to the roots but unfortunately I still have same problem
-
Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"
Have you completed all windows update including service Pack1? If not, please complete all the windows update then follow steps below to re-install all over.
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Problem on installing new Repository
I have encountered the following error while installing a new Repository Instance at Repository Administration Utility, plz help, thx a lot.
Message
CDR-21244: This process has been aborted.
Cause
The .msg message file 'f:\ids92\repadm61\cdrzus.msg' for product "CDRMSG61", utility "CDR" could not be found.
ActionSee note: 190092.1 on Metalink.
Resolving the CDR-21244 error obtained while doing a Repository
installation against a Unicode database (8i or 9i) and having
the client side setup with a Unicode characterset such as UTF8.
Good luck,
ANdrew -
When trying to download the newest version of itunes, when running the installation package, a message pops up that says "There is a problem with this Windows installer package...please contact your support personnel or package vendor." Also, the same message appears when trying to uninstall the APPLE SOFTWARE UPDATE.
When trying to download the newest version of itunes, when running the installation package, a message pops up that says "There is a problem with this Windows installer package...please contact your support personnel or package vendor." Also, the same message appears when trying to uninstall the APPLE SOFTWARE UPDATE.
-
Error in installing a new Repository in OWB 10g Release 2
Hi,
I am facing a consistent problem in creating a new repository, even after uninstalling and re-installing the OWB client many times. While creating a repository, I get the following three errors, after which the Repository Assistant automaticlly shuts down:
1. The wizard noticed that the installation parameter 'enqueue_resources' of the database GRUSIT is set to 968. The recommended value for Warehouse Builder is 3000.
2.The Warehouse Builder repository owner installation failed on user REPOWNER.
java.sql.SQLException: ORA-04031: unable to allocate 4080 bytes of shared memory ("shared pool", "BEGIN
DECLARE
PROCEDURE brow...", "PL/SQL MPCODE", "pl/sql DS pg")
3.INS0029: Error occured during installation. Check the log file
F:\OraHome_1\owb\UnifiedRepos\log_070504_115828.000.log
for details.
Could you pls help me in resolving this issue?
Thanks in advance,
TanviDoes this mean, ... we have to install the OWB 64 bit and install a new repository in the 64 bit server?In my opinion you don't need to create new repository.
After migrating database to 64bit perform steps from Metalink note 434272.1 "How To Update Warehouse Builder 10.2 After A Database Cloning".
It is better to save the same path for new OWB 64bit software. If you install OWB into different path you need to update OWBRTPS table with new path to OWB software (look at metalink note 550271.1).
Regards,
Oleg -
INS0003 OWB Repository Installation cannot continue without DBA privileges
Hi:
I´ve installed oracle database 10120 and today installed oracle warehouse builder 10.1, the installation haven´t problems, but when i try to execute OWB Repository Assistant i have the follow message error:
INS0003 OWB Repository Installation cannot continue without DBA privileges
If i connect me to OEM and check the privileges for sys or system user don't have any problem if i connect me as sysdba.
I created a new user with all privileges and the error is the same.
How could i fix my problem?
Thanks for your help.
Alex.This issue is normally caused because you have not setup sys to connect as sysdba per newer database setup procedures, test with connect "/ as sysdba" in sql*plus.
If you cannot connect from SQLPlus by just the '/ as sysdba' login, then check the Note 50507.1 via Metalink as this describes the different ways you can connect to Oracle as an
administrative user.
Hope this helps,
Keith
Product Management
Oracle Warehouse Builder -
I cannot Install a new repository
please help me. I cannot install a new repository whith Repository 6i. I got the message : CDR- 21244 This process has been aborted.
in the cause : The .msg message file 'c:\oracle\orades\repadm61\cdus.msg' for product "CDRMSG61", utility "CDR" could not be found.
please if you have any information about this problemI got the same, installing des2k 6.1 server side on win2000 to oracle server 9i under linux.
Now it works partially. tips:
check that: 1) you are admin 2) the sequence in the path is correct (des2k/bin directory could have wrong exe respect the $oracle_home/bin) 3) oracle_home is correctly set
But i got another error, during the installation process!
log: ckrau61.log
CAWRepositoryQueryObject - Executed SQL statement :- CREATE OR REPLACE VIEW CI_ROOT_APPLICATION_SYSTEMS [...cut...]
---> gives me that the name of the constraint is invalid or missing.
I can "repeat the last action" but the process faults and closes .
helpme pls...
I encountered the same problem. I tried to install the repository from a Windows2000 client machine on a Linux host where the Oracle 9.2 instance is running. The first problem was an abort of the semi-automatic installation procedure due to a non-working tablespace-creation statement in the supplied scripts. After fixing this manually, the repository manager starts with several error messages, one of them the one below.
Can someone help?
please help me. I cannot install a new repository whith Repository 6i. I got the message : CDR- 21244 This process has been aborted.
in the cause : The .msg message file 'c:\oracle\orades\repadm61\cdus.msg' for product "CDRMSG61", utility "CDR" could not be found.
please if you have any information about this problem -
Error while registering a new repository on Data Services 4.0
Hi all,
I've a BO Enterprise Platform 4.0 + Data Services 4.0 installation, and I'm trying to register a new local repository in addition to the installation default one. I followed these steps:
1) Create a new database schema for the repository
2) Created the local repository with repository manager
3) Created a new job server associated with the new repository through the server manager
4) Tried to register the new repository in the CMC
I wasn't able to complete the step 4 since i got the following error "unable to connect to profile server".
Any clue?
Thank you very much
Pietro
Edited by: Pietro Castelli on Jan 30, 2012 12:03 PMwhat is the complete version of DS 4.0 ? also check the REPO_TYPE in AL_VERSION table, for local repo this will be NULL
-
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had. I uninstalled all of itunes, and now I'm getting the error message "there is a problem with this windows installer package. Aprogram required for this install to complete could not be run.
Help! I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
Thanks!I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....
-
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,
Maybe you are looking for
-
I have 4 IBM T series laptops, 3 T-40's and ONE T-42...The issue I have is with the T-42 ..2379RFU , it randomly freezes and from studying the problem I find it is for instance when using IE and I select to DL some software ..there is 2 windows that
-
When they ask for the gateway numbers on the TV, what number is that or what should I be looking for? I am trying to connect my wifi network on my Samsung smart TV.
-
SELECT DISTINCT OBJECT and ntext
Hello, How can I write an ejb query that selects distinct ejbs, given that the underlying data table has NTEXT data in it? The old ejb query <ejb-ql><![CDATA[ SELECT DISTINCT OBJECT(a) FROM Article AS a ]]></ejb-ql> used to work fine in weblogic 7, b
-
Visual composer startup problem
Hi All, I have installed CE 7.1 trail version . Where I have to work on VC .I am giving follwing link to open VC http://<hostname>:port/VC/default.jsp . It take me to the login page of VC and after successful login I am not able to see the next pa
-
Hi, I have some .mht files stored in a KM folder. When I review the properties of this file it shows the "Target Url" as having an http://<%hostname%> location. I am logged on as HTTPS. Does this cause any problems? Is the "Target URL" correct e