Problem in Nokia C7 while using Whatsapp appplicat...

I am using whatsapp on my Nokia C7 & for some reason I cannot make phone calls but I am able recieve calls, send normal text messages (sms' not using whatsapp) & able to surf internt. Each time i have to remove/uninstall whatsapp application to make a call
my simcard is working fine & able to make calls.
My friends are also using Whatsapp application on nokia phones but they dont have this problem.....
Pls help for resolving this issue...

I have similar (?) problem this morning... OVI Suite saids me that 4 updates were available, but it fails to download them. Since then, I don't see them anymore from OVI Suite, phone's updater, or PC Nokia Software updater...
I'm not sure if these 4 updates were really available ?
Or is there a "timeout" between update (failure) ?
C7@013-016 firmware aka RM675

Similar Messages

While using whatsapp on my iphone my set is becoming hot from back side

While using whatsapp on my iphone my set is becoming hot from back side

this could be a battery problem , you should go to the nearest apple retail store and have them check tha battery or it coulb be that the iphone is in a cover or case that is making it hot

Problem with Progress DB while using to connect using JDBC Adapter

Hi,
I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
Error during database connection to the database URL jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db using the JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db "
I tried using the following all URLs,
1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.
2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db
3.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.
4.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db.
Can anyone please help me out in solving this issue.
May be the cause for this is :
1) The Wrong URL format
2) CLASSPATH is not setted properly..
Can you look more into this stuff.
Thanks,
Soorya.

Hi,
To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
Just check this note 831162.
Also, check this PDF to install Drivers in XI,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

Problem in reports 6i while using delimiter option.

Hi,
I am facing problem in report writer while using delimiter option.
Report summary
==============
In my report I am having two queries in data model and two different repeating frame for each in layout.
These quires are called based on the user parameter. That means if user parameter is 1 then query 1 is called and the report is kick off and same for query 2 when user parameter is 2).
Problem Encountered
=================
Both these reports are running fine while using pdf option to generate report .
While using delimiter option only one of the query is able to generate report (based on which ever is created first and rest will give 0 byte file).
I have also trapped it while using messages and it is logically flowing fine.
I think report writer does not support such scenario.
please expedite on this.
thankx
peyush

Hi,
There are no such limitations with Reports. If I understand properly, you run the Report twice, in each run, you are trying to execute different query, and you generate two dilimited Reports output files? This should work fine. Try out the latest Reports 6i patch-10 for this. You can even approach Oracle Support with your testcase. FYI, with Reports 6i patch-11, a new feature "dlimited data" is introduced which will give delimited output with a data dump i.e it would not be dependent upon the Reports layout. You can probably try out this new feature also.
Thanks,
Rohit Hi Rohit,
Thanks for the information.
well I am generating single output file on each run .
the problem is somewhat funny.
I have build query2 in data model after query1.
query 1 is giving me correct output both in .PDF and delimiter version.
But query2 is giving me 0 byte file for delimiter version although in .PDF it is running fine.
When I took out query2 to another module it is running fine for both.
I hope this make sense.
Moreover if u still not clear about the problem and thinks that u can help me out please send me ur mail id so that I can send you the RDF copy.
Thanks
Mohit...

Problem in DII client while using custome type

Hi All,
I am accessing a webservice using JAX-RPC DII cleint. Webserviuce is deployed on a websphere app server 6.0
In Webservice i have 1 complextype called Address.
When i try to call the webservice and try to pass the complex type as parameter to web service i get deserialization error for complexType.
I tried to register it using TypeMappingRegistry but again iam getting
exception like "you can't modify default typemapping".
here is my code
public class DIITip implements SerializerConstants {
public static void main(String args[]) {
try {
QName serviceName = new QName("http://localhost:9080/AddressBookService/services/AddressBook/wsdl/AddressBook.wsdl","AddressBookService");
ServiceFactory factory = ServiceFactory.newInstance();
Call call = service.createCall();
QName operationName = new QName("http://addr","setAddressFromName");
call.setOperationName(operationName);
// The input parameter
call.addParameter(
"arg_0_1", // parameter name
QNAME_TYPE_CPLX_TYPE, // parameter XML type QName
Address.class, // parameter Java type class
ParameterMode.IN); // parameter mode
// The return
call.setReturnType(XMLType.XSD_BOOLEAN);
// The operation is an RPC-style operation.
call.setProperty(Call.OPERATION_STYLE_PROPERTY,"rpc");
call.setProperty(Call.ENCODINGSTYLE_URI_PROPERTY,"http://schemas.xmlsoap.org/soap/encoding/");
call.setTargetEndpointAddress("http://localhost:9080/AddressBookService/services/AddressBook");
               Address addr = new Address();
               addr.setStreetName("Jogesh");
               addr.setCity("Puri");
               addr.setState("Orisaa");
     TypeMappingRegistry registry = service.getTypeMappingRegistry();
     TypeMapping mapping2 = registry.getTypeMapping("");
     TypeMapping typeMapping = registry.getTypeMapping(SOAPConstants.URI_ENCODING);
QName type = new QName("http://addr", "Address");
CombinedSerializer serializer = new addr.Address_SOAPSerializer(type,
ENCODE_TYPE, NULLABLE, SOAPConstants.NS_SOAP_ENCODING);
serializer = new ReferenceableSerializerImpl(SERIALIZE_AS_REF, serializer);
registerSerializer(typeMapping,addr.Address.class, type, serializer);
// Invoke the operation
Object[] actualArgs = {addr};
Boolean obj = (Boolean) call.invoke(actualArgs);
               if (null!= obj)
                    System.out.println(obj.getStreetName()+" "+obj.getCity()+" "+obj.getState());
               }else
                    System.out.println("Obj is null");
catch (Throwable t) {
t.printStackTrace();
private static void registerSerializer(TypeMapping mapping, Class javaType, QName xmlType,
Serializer ser) {
mapping.register(javaType, xmlType, new SingletonSerializerFactory(ser),
new SingletonDeserializerFactory((Deserializer)ser));
Anybody know how to register/use complext type while using DII client
Many thanks for any help offered.
capri

Hey Capri,
did you solved your problem?
I' am also looking for a solution to add complex Types.
I use webservices with apache axis. There I don't have to add the parameter to the call object. In the server-config.wsdd, there are all information about the complex type. So I only have to invoke webservice with my object.
But now I want to invoke a BPEL-Process as webservice. I think at this term I have to add the parameter to the call object.
regards,
kirie

Problem creating schema source while using WebService in MessageMapping

Hi, scenario is RFC2WS.
Problem that occurs is that when i want to use a method from WebService in MessageMapping XI won't import the structure. I am getting following error. The WSDL is from an external portal on which a WebService is ready to invoke.
What might be the problem?! 

Problem when creating schema source:
Details
java.lang.NullPointerException
STACKTRACE:
com.sap.aii.utilxi.misc.api.BaseException: java.lang.NullPointerException
 at com.sap.aii.ib.gui.xmleditor.docview.views.XsdSchemaTextable.setSchema(XsdSchemaTextable.java:86)
 at com.sap.aii.ib.gui.xmleditor.docview.views.XsdContainerTextView.setSchema(XsdContainerTextView.java:46)
 at com.sap.aii.ib.gui.xmleditor.docview.views.XsdContainerTextView.<init>(XsdContainerTextView.java:36)
 at com.sap.aii.ib.gui.xmleditor.docview.MultiViewEditor.makeFromTreeDoc(MultiViewEditor.java:216)
 at com.sap.aii.ib.gui.xmleditor.docview.MultiViewEditor.<init>(MultiViewEditor.java:64)
 at com.sap.aii.mappingtool.mf.TransformationPanel.createTargetView(TransformationPanel.java:264)
 at com.sap.aii.mappingtool.mf.TransformationPanel.<init>(TransformationPanel.java:100)
 at com.sap.aii.mappingtool.mf.MappingTool.<init>(MappingTool.java:32)
 at com.sap.aii.mappingtool.api.MappingToolFactory.getInstance(MappingToolFactory.java:96)
 at com.sap.aii.mappingtool.fwutil.util.ToolUtil.restartTool(ToolUtil.java:315)
 at com.sap.aii.ibrep.gui.mapping.xitrafo.XiTransformationView.loadIfrSchema(XiTransformationView.java:274)
 at com.sap.aii.ibrep.gui.mapping.xitrafo.XiMappingView$LinkDataTarget.setData(XiMappingView.java:378)
 at com.sap.aii.ibrep.gui.mapping.xitrafo.XiTransformationView$MessageDataTarget.setData(XiTransformationView.java:973)
 at com.sap.aii.utilxi.swing.toolkit.dnd.DataTarget.setData(DataTarget.java:514)
 at com.sap.aii.utilxi.swing.toolkit.dnd.DataTarget.drop(DataTarget.java:462)
 at java.awt.dnd.DropTarget.drop(Unknown Source)
 at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(Unknown Source)
 at sun.awt.dnd.SunDropTargetContextPeer.access$800(Unknown Source)
 at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(Unknown Source)
 at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(Unknown Source)
 at sun.awt.dnd.SunDropTargetEvent.dispatch(Unknown Source)
 at java.awt.Component.dispatchEventImpl(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
 at java.awt.LightweightDispatcher.processDropTargetEvent(Unknown Source)
 at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Window.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.EventQueue.dispatchEvent(Unknown Source)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.run(Unknown Source)
STACKTRACE:
java.lang.NullPointerException
 at com.sap.aii.utilxi.xsd.api.XsdHandler.saveSchemaToDocument(XsdHandler.java:61)
 at com.sap.aii.ib.gui.xmleditor.docview.views.XsdSchemaTextable.setSchema(XsdSchemaTextable.java:82)
 at com.sap.aii.ib.gui.xmleditor.docview.views.XsdContainerTextView.setSchema(XsdContainerTextView.java:46)
 at com.sap.aii.ib.gui.xmleditor.docview.views.XsdContainerTextView.<init>(XsdContainerTextView.java:36)
 at com.sap.aii.ib.gui.xmleditor.docview.MultiViewEditor.makeFromTreeDoc(MultiViewEditor.java:216)
 at com.sap.aii.ib.gui.xmleditor.docview.MultiViewEditor.<init>(MultiViewEditor.java:64)
 at com.sap.aii.mappingtool.mf.TransformationPanel.createTargetView(TransformationPanel.java:264)
 at com.sap.aii.mappingtool.mf.TransformationPanel.<init>(TransformationPanel.java:100)
 at com.sap.aii.mappingtool.mf.MappingTool.<init>(MappingTool.java:32)
 at com.sap.aii.mappingtool.api.MappingToolFactory.getInstance(MappingToolFactory.java:96)
 at com.sap.aii.mappingtool.fwutil.util.ToolUtil.restartTool(ToolUtil.java:315)
 at com.sap.aii.ibrep.gui.mapping.xitrafo.XiTransformationView.loadIfrSchema(XiTransformationView.java:274)
 at com.sap.aii.ibrep.gui.mapping.xitrafo.XiMappingView$LinkDataTarget.setData(XiMappingView.java:378)
 at com.sap.aii.ibrep.gui.mapping.xitrafo.XiTransformationView$MessageDataTarget.setData(XiTransformationView.java:973)
 at com.sap.aii.utilxi.swing.toolkit.dnd.DataTarget.setData(DataTarget.java:514)
 at com.sap.aii.utilxi.swing.toolkit.dnd.DataTarget.drop(DataTarget.java:462)
 at java.awt.dnd.DropTarget.drop(Unknown Source)
 at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(Unknown Source)
 at sun.awt.dnd.SunDropTargetContextPeer.access$800(Unknown Source)
 at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(Unknown Source)
 at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(Unknown Source)
 at sun.awt.dnd.SunDropTargetEvent.dispatch(Unknown Source)
 at java.awt.Component.dispatchEventImpl(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
 at java.awt.LightweightDispatcher.processDropTargetEvent(Unknown Source)
 at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Window.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.EventQueue.dispatchEvent(Unknown Source)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.run(Unknown Source)


Hi ,
Can you please cross check these steps carefully.
1. After importing the WSDL using external definition, did you checked msges Tab for for the included msg to see what msges you have added.
and be careful that the namespaces of the messages are part of the WSDL description and can differ from the namespace of the external definition object.
2.Did you created message Interface corresponding to the message types from the external definition? it is needed to route the message to webService. Here select message types of the external definition object. Assign input and output messages.
3. Creating a SOAP Receiver Channel
To call the Web service, you create a communication channel with type SOAP and
direction receiver in the Integration Directory. The obligatory parameters in the
configuration are Target URL and SOAP action. You get the values you have to enter
here from the WSDL file.
Creating a SOAP Sender Channel
When you create a SOAP sender channel you have to define the namespace and the
name of a message interface. Since no input help is provided, you copy and paste the
values from your Integration Repository.
Select the Quality of Service according to your interface type. If you are using a
synchronous interface, select Best Effort. Otherwise, select Exactly Once or EOIO.
Hope this will help you to figure out.
Regards
Aashish Sinha
PS : reward points if helpful

Problem in finding wsdl while using obant

Hi
I am trying to invoke process2(pro2) from process1(pro1)
I have copied the wsdl file and schema of process2 in process1 bpel folder and the partner binding entry in bpel.xml is pro2.wsdl which is correct
I have created acustom build .xml file as described in :
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/deployproc.htm#sthref3366
when I try to deploy using obant,
i get follwoing error:
Buildfile: build.xml
Trying to override old definition of task customize
pre-build:
validateTask:
[echo]
[echo] --------------------------------------------------------------
[echo] | Validating workflow
[echo] --------------------------------------------------------------
[echo]
[validateTask] Validation of workflow task definitions is completed without erro
rs
compile1:
[echo]
[echo] --------------------------------------------------------------
[echo] | Compile1 in bpel process Pro1, revision 1.7
[echo] --------------------------------------------------------------
[echo]
compile:
[echo]
[echo] --------------------------------------------------------------
[echo] | Compile Task in custom build.xml in bpel process Pro1, revision 1.
7
[echo] --------------------------------------------------------------
[echo]
[echo]
[echo] --------------------------------------------------------------
[echo] | wsdl location is ${wsdlLocation} which is also
[echo] http://[hostname]:8889/orabpel/default/Pro2/1.7/Pro2?wsdl
[echo] --------------------------------------------------------------
[echo]
ORABPEL-01021
BPEL validation failed.
BPEL source validation failed, the errors are:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "_bpel.xml", Failed to read wsdl.
Error happened when reading wsdl at "C:\WINDOWS\Oracle\jdevstudio10133\jdev\mywo
rk\POC\Pro1\bpel\http:\[hostname]:8889
%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20\orabpel\default
%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20\Pro2\1.7\Pro2?ws
dl", because "Failed to read wsdl file at: "file:/C:/WINDOWS/Oracle/jdevstudio10
133/jdev/mywork/POC/Pro1/bpel/http:/[hostname]:8889
%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20/orabpel/default
%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20/Pro2/1.7/Pro2?ws
dl", caused by: java.io.FileNotFoundException. : C:\WINDOWS\Oracle\jdevstudio
10133\jdev\mywork\POC\Pro1\bpel\http:\[hostname]:8889
\orabpel\default
\Pro2\1.7\Pro2?wsdl (The filename, directory name, or volum
e label syntax is incorrect)".
Make sure wsdl exists at that URL and is valid.
[Potential fix]: If your site has a proxy server, then you may need to configur
e your BPEL Server, designer and browser with your proxy server configuration se
ttings (see tech note on http://otn.oracle.com/bpel for instructions).
at com.collaxa.cube.lang.compiler.CubeProcessor.validateClientSide(CubeP
rocessor.java:1133)
at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(Cube
Processor.java:449)
at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(Cub
eParserHelper.java:83)
at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(Single
CheckExecutor.java:37)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:382)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExe
cutor.java:40)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at org.apache.tools.ant.Main.runBuild(Main.java:668)
at org.apache.tools.ant.Main.startAnt(Main.java:187)
at org.apache.tools.ant.Main.start(Main.java:150)
at org.apache.tools.ant.Main.main(Main.java:240)
BPEL validation failed.
BPEL source validation failed, the errors are:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "_bpel.xml", Failed to read wsdl.
Error happened when reading wsdl at "C:\WINDOWS\Oracle\jdevstudio10133\jdev\mywo
rk\POC\Pro1\bpel\http:\[hostname]:8889
%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20\orabpel\default
%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20\Pro2\1.7\Pro2?ws
dl", because "Failed to read wsdl file at: "file:/C:/WINDOWS/Oracle/jdevstudio10
133/jdev/mywork/POC/Pro1/bpel/http:/[hostname]:8889
%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20/orabpel/default
%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20/Pro2/1.7/Pro2?ws
dl", caused by: java.io.FileNotFoundException. : C:\WINDOWS\Oracle\jdevstudio
10133\jdev\mywork\POC\Pro1\bpel\http:\[hostname]:8889
\orabpel\default
\Pro2\1.7\Pro2?wsdl (The filename, directory name, or volum
e label syntax is incorrect)".
Make sure wsdl exists at that URL and is valid.
[Potential fix]: If your site has a proxy server, then you may need to configur
e your BPEL Server, designer and browser with your proxy server configuration se
ttings (see tech note on http://otn.oracle.com/bpel for instructions).
BUILD FAILED
C:\WINDOWS\Oracle\jdevstudio10133\jdev\mywork\POC\Pro1\build.xml:60: The followi
ng error occurred while executing this line:
C:\WINDOWS\Oracle\jdevstudio10133\jdev\mywork\POC\Pro1\bpel\build.xml:44: Valida
tion error
Total time: 2 seconds
C:\WINDOWS\Oracle\jdevstudio10133\jdev\mywork\POC\Pro1>ENDLOCAL
why is trying to locate wsdl at "file:/C:/WINDOWS/Oracle/jdevstudio10
133/jdev/mywork/POC/Pro1/bpel/http:/[hostname]:8889/orabpel/...
The local copy of wsdl is in POC/Pro1/bpel and http://... is wsdl url but how is it coming together?
ant why am i getting so many %20s?
Could anybody help me understand this error and resolve the issue?
Thanks,
Ketan

since i have copied the wsdl in to bpel folder - wherr bpel.xml is present , i am giving only the wsdl name as location and not the whole path. I hope this is correct

Problem with function keys while using Terminal to connect to UNIX host

We are trying to use macs at my office, but we've hit a big roadblock. Our company software runs on a UNIX server, and until now everyone in the company uses either dedicated UNIX terminals, or terminal emulation software in windows. I was thrilled to learn that we could use the terminal in OSX to connect to the server, and it did not take long to get it to work.
The problem is the function keys. Almost all of the menu options in our company software require the use of the function keys, F1-F10. I was able to access F9 and up by pressing command-F9, etc. but we're now having issues with F3 and F4.
The computer in question is an intel macbook, and we have been using the fn key of course. The specific problem they showed me was with F3. In the software, it is supposed to lauch an extra menu, but pressing fn-F3 on the macbook results in an error ("number required", which is the message it would normally return if we tried to press return).

Your problem is two-sided, I think. The first is that you need to set Terminal to send the right escape sequence. This is done with the Inspector (CMD-I) and selecting Keyboard. Get the correct key mapping in there. The other side is to make sure the system isn't intercepting your intended keystroke, so go into System Preferences->Keyboard & Mouse->Kwyboard shortcuts and make sure that the bindings you're using aren't enabled.

Problem on zero's while using gui_download

Hi,
While downloading the internal table content for ex. 000010 to Excel sheet by using GUI_DOWNLOAD , zeros are truncated and becomes 10(in this case).
Is it any possible way to get as like 000010?
Thanks

give the FILETYPE as DBF and checkout if it works
or
in the excel file , right click on that column>format cellschoose text

I have a problem with the speaker while using viber, Tango and rebtel

I have upgraded my iPhone 4 to 5.1.1 and in no time I started having a problem with the speaker. It simply doesn't work at all with Viber, Tango and Rebtel. It works fine with direct calls but not with calls through these applications. I have contacted Tango and Rebtel in this respect but non could help. Is anyone experiencing such problem. is there a solution. Many thanks for your helo

Thank you. Have given it a try - it sort of works, although doesn't turn up very loud!

Can t send photo using whatsapp on iphone 4s. Choose existing photo from camera roll then, I can only see cancel, send , key and it says press and hold over a thumbnail to rearrange but chosen photo is black... should say blank...what happened? Re

Dear all,
I want to upload photo form photo gallary while using whatsapp on iphone 4s either it was blank or the statement written over " pree and over a thumbnail to rearrange" comes at the bottom of white window haveing sing of cross at top left hand side...some of pics were able to send and some of them are not pl help me..

PORT YOUR NUMBER OUT...T MOBILE WILL PAY YOUR ETF IF YOU GIVE THEM YOUR VERIZON PHONES.

Mouse is very laggy while using trackpad, but click and right click are not

This problem started yesterday. While using the trackpad, the mouse became very laggy. I stopped to see if a few minutes would help fix the problem, but the mouse kept moving sporadically. I can click and right click fine and with no lag, but the mouse is either non responsive or extremely laggy. The problem was infrequent at first, but now it is almost constantly there. I'm using a MacBook Pro with Mac OSX version 10.5.8.

Use the Toshiba application installer to reinstall the Touchpad driver.
To find it search your laptop for Toshiba application installer and run it is will download and install all your drivers.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Problem: i want to use the Nokia ones while listen...

Hi, I bought a Nokia 5300.
I noticed that to get the FM Radio working i have to insert an enhancement (AD-50) into the side of the phone (this was supplied in the box)
Now i want to plug in my (Nokia HS-47) headphones (which was also included in the box). Where do i plug this into?
-Because the port where i usually plug it into is now occupied by the FM enhancement.
-And it is too thin to fit properly into the enhancement.
PS. If i use standard headphones the 3.5mm ones. I can plug it into the FM enhancement. But i want to use the Nokia ones while listening to the FM radio.
Can this be done???
Do i need a special adaper for my nokia headphones?
Should this already be supplied in the box?
Please help I have no clue!

just use the Nokia headphones without the 3.5-2.5 converter piece (which you seem to call "enhancement" ).
I mean, just try it.Message Edited by fred_be9300 on 01-Nov-200702:43 AM
My Nokia history: 5310 (Sep 2008), 5300 (Jan 2007), 6610 (June 2003), 3310 (2001)

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Problem in Nokia C7 while using Whatsapp appplicat...

Similar Messages

Maybe you are looking for