Problem in Number Range - object RF_BELEG
Hi,
i Have error that ....... For object RF_BELEG XXXX, number range interval 50 does not exist FBN1
i have gone to FBN1 and even SNRO and gave this object.
Number is already maintained there for 2010 for interval 50 but system still showing me error.
Help Me !
Regards,
Pardeep Malik
check fiscal year. sometimes 2010 yr is defined s 2011.
Similar Messages
-
Problem of number range object
hi experts,
the user use PA40 to record events and create an employee, the user wants the system to warn if the total number of employee beyond limits.
so i found an exit 'PBAS0001' and implements it, if the total number beyonds limits, and popup to warn user and exit. But the number of employee is got from the number range object. when the program runs to the PBAS0001, the number range object has already add one, and next time when employee created, the employee number wouldn't be continuous.
if the employee number must be continuous, so how to solve this problem? or is there other exit fm runs before the number range object adds? i found an exit named HRBAS00_STRUAUTH runs befor the range object but the necessary parameter is not all ready.
hunger for your advices, and thanks a lot.hi,
please describe in a more detailed way ....
when you start the transaction the numer is for examle 2000 you save the employee. And now you start your transaction again which number is shown now ?
regards -
SNRO - Creation of Number range object problem
Hi Experts,
i wanted to create a number range object thru SNRO.
The creation was successful in DEV system.
when i tried to create the same number range object in QA server, i am getting the following error
"Changes to Repository or cross-client Customizing are not permitted - Choose 'Display object' or 'Cancel'."
this is a Znumber range used to generate sequential numbers using FM NUMBER_GET_NEXT
What could be the problem. how to over come this?
Is it the missing authorizations? if so what could be the authorization object (SU53 shows nothing)
Appreciate any help in this regard.
Thanks
SimhaHi All,
I am confused with the conflicting answers for my problem. But anyways i could transport the number range object and could create a number range interval in QAS.
Thanks a lot for all your valuable inputs.
But i am still not out of this so called misconception - Are number range objects to be transported to QA or to be created afresh in QA/PRD?
Earlier some one told to be created but now i see they can be transported.
I was not ready to edit the options in SCC4 for the client to enable object creation.
Thanks again,
Simha -
Interval 01 was not created for number range object HRTEM_REFN
Dear expert!
Now, I'm getting some issues in Training and event management module.
- The first, I created business event
- Second, I process to book for business event by tcode: PSV1 --> book --> book/payment info --> activity allocation.
But when I was booking, the system displayed error: "Interval 01 was not created for number range object HRTEM_REFN"
Help me, please!
Best regards, Huy!Go to the customization as below
Training and event mgt>Basic settings>Number range maintanence>Define number ranges for External operation
and maintain number ranges as 01 Internal
Hope ur problem will solve
with regards
partha -
Transporting error! While transporting Number Range Object
Hi All,
Thanks in Advance.
I have created a Number Range Object(Not a interval range) in Development Box(SNUM). (We have 2 production box) I transported the Number Range object to 2 production box.
Number Range Object Transported successfully for one box. But It is not getting transport into other box.
Could you please help, to solve this problem.
is there any configuration?
<b><u>Error Log Detail.</u></b>
ADO import (12) Cancelled
Log generation messages ....................................... (000-999)
Log generation messages ....................................... (000-999)
Ended with return code: ===> 12 <===
Deleted from buffer ( Ended with errors )
I don't know, how to resolve this error.
Thanks Again!
Regards
AnandHi,
Please refer to the SAP note : 132020
Symptom
With the import of a transport request or the import of a patch with the SPAM, tp terminates during the ADO import with return code 12.
In the ADO import log file of the request, cancelled jobs are refered to. With transaction SM37, you can find a cancelled job, suitable for the import RDDDIC1L, in the job log with one of the following messages:
ABAP runtime error: ASSIGN_OFFSET+LENGTH_TOOLARGE
ABAP runtime error: Exclusion criterion "RDDDR310_ERR02" initialized
Additional key words
Cause and prerequisites
The ADO data file was not generated locally on a transport domain computer, rather it was, for example, transported with ftp and unpacked from out of an archive with CAR.
Solution
One cause could be that the data file for the ADO import was not transferred correctly. To check this, the following derivation steps are required:
Start the operating system command 'R3trans -l <Datenfile>' and check whether the data file for the ADO import is corrupt.
Assumed that a transport request is called C11K900123, the respective ADO data file D900123.C11 is also like this and stands in the subdirectory 'data', in the transport directory.
Compare the size of the data file in the transport directory with that of the original file. The size must be identical.
If a check shows that the data file is corrupt, transfer the data file again.
Award points iff it helps.
Regards,
GSR. -
Sequential numbers in non-buffered number range object
I need some help pointing in the right direction to analyze and prevent a problem with a NON-BUFFERED custom number range object.
This process works well. Once or twice however, sequences have been created with an apparent delay and are out of order. I don't know why, or where to look to diagnose the timing, etc. It's very difficult to recreate.
We have a custom number range object; ZFSEQ in SNRO that is responsible for assigning a sequential number to a series of flat files produced by number of different interfaces. Those interfaces all use the FM 'NUMBER_GET_NEXT' and then they build a file name with that sequence number. That object is not buffered.
During heavy volume of updates (where lots of these sequences are being called and created by different interfaces, the table NRIV is locked and released by each interface. During this time of heavy updates, we have an infrequent problem that has occurred where a standard sales order create created a sequence number that is greater than the sequence number generated by the delivery create. (The delivery was created a couple of minutes later than the order, yet the order created a flat file sequence number greater than that of the delivery.
I hypothesize that the flat file call for the order (using the FM 'NUMBER_GET_NEXT') was somehow delayed(because of heavy lock/usage of NRIV). The actual order document and delivery document were created normally. I also am thinking that buffering on the object would prevent this. I cannot at this time implement buffering on the object, but we are working towards that.
The order create originates from our e-commerce system through a webserive, and in SAP, flows like this:
Main webservice RFC: Z_ORDER_CREATE
Call Z_create_order_bgd IN BACKGROUND TASK
Call BAPI_SALESORDER_CREATEFROMDAT2 )
MV45AFZZ--> userexit_save_document.
call Z_FUNCTION_TO_GET_SEQUENCE
CALL FM 'NUMBER_GET_NEXT' <---- order create sequential file created
commit work.
The delivery sequential file is created in
MV50AFZ1 (the Delivery User Exit)
Where can I look to conclusively see what happened to delay our sales order sequence? What could be done to prevent it?
Thanks
Jeremy H.Just want to post the answer that we found to this issue and close it, though more comments are always welcome!
We are going to move forward with buffering the Z object for the range as studies have shown and all other consulting input seems to be that buffering will solve this problem. -
Hi
During data extraction im getting the following error message
"Error calling number range object ZMATNO for dimension D2"
pls help me out.. how should i proceed from here...
Thanks in advance,
Sowdha.Hi Sowdha,
First any way you have to correct the number range interval using RSRV. If it reports error with number range interval for this particular dimension.
(RSRV should report error when you check the dimension)
The reason(s) for the error could be:
1. The number range interval for this dimension is "Buffered"
2. There are not many "Dialog processes" available in the system
To avoid such error:
1. restrict the number of parallel processes while loading the data using the option
"PSA and then into Target"
2. or make sure that sufficient number of dialog processes available at the time of
loading
Check the note "708297" for details why the error occurs though it is not directly pointing to Dimension ID number ranges, the explanation suits your problem also.
Assign points if this helps.
thanks
sarma -
Number range object missing NRIV and cant activate IOBJ during import
Hi,
We have a number object RS_OBJNUMG in BW used for many infoobjects. However object doesnt exists in table NRIV and import for infoobjects are failing with error:
Interval 01 of number range RS_OBJNUMG is missing
message R7453
I thought that as when infoobjects are created they get automatically assigned to number range....
Can somebody help?
thankshi,
check if the similar problem
Error calling number range object 0MATERIAL for dimension D4 ( )
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> choose the infoobjects>> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
hope this helps -
Problem in number range assignment
Hi All,
we have requirement to create a number range object(SNRO). Using FM NUMBER_GET_NEXT creating numbers.
Here i am facing problem, when i am executing FM directly it is getting next number. But it is not updating it as current number in number range object(SNRO). Sometimes i see it skip 5 number in between n update as current number(not in the sequence)
if anybody worked on similor case, please revert bask when you find the time.
Thanks,
Madhavi
Edited by: kishan P on Nov 23, 2010 2:22 PMIt looks like buffer issue of number range.
Do as following to come out form the problem.
Goto SNRO and Enter the Number range name
Click on Change.
Then form Menu-> EDIT ->Buffering -> Select No Buffering..
Also remove the number in buffer to 0 which is 10 by default.
Save and Try now.. -
Number range object HRTR_PDOC : Interval not found
Hi,
I am doing Travel Mgt testing i got two problems
1. Travel Policy is not taking when entering the expences
2. when posting the doc to FI the error "Number range object HRTR_PDOC : Interval not found" is coming
Pls suggest
thanks in advance
chanduHi,
Check table NRIV
Regards,
Manoj. -
Hi,
I've created my number range object in client 100.When I test it in client 100 it works fine.I'm using FM NUMBER_GET_NEXT.When I try to test in a test client 200 it gives me an error message 'ZBATCH_CLT, number range interval 01 does not exist'.What could be the problem?
Thanks
StefanHi,
The number range itself is not client independent. Did you check SNUM for 'ZBATCH_CLT'? You might need to add interval 01 first.
MdZ -
Number range objects not maintained properly...??
Am doing a Purchase Requisition for asset material. While saving the PR document am getting error like
I have went to SNRO and checked asset number range object ANLAGENNR , there intervals are maintained. i couldn't go further with the issue, Can anyone help me with the solution please?
Regards,
NaveenHi,
Please
1. Go to transaction code J1I9
2. Give object name as BANF.
3. Click on Number Ranges.
4. Click on Intervals
5. Maintain Intervals
6. Save
Hope, your problem has been resolved else revert.
Regards,
Tejas -
Hello
I want to maintain the number range for PO doc types
What is the Number Range Object Name for PO
For SNRO
Regards
Niti NarayanHi there
Following are the regularly used objects in Materials Management
Material number materialnr
Vendor master kreditor
Purchase requisition banf
Request for quotation einkbeleg
Purchase orders einkbeleg
Contracts einkbeleg
Service master record leistung
Service entry sheet service3
Physical inventory document matbeleg
Goods receipts / return matbeleg
Goods movement (transfer posting)
/ goods issue matbeleg
Reservation resb
Accounting documents rf_beleg
Purchasing info record infosatz
Regards
Amit -
ODS Activation Failure due to Number range object for characteristic ZTXLEV
Hi
I am having problem regrdng ODs actvtn failure,I am gettng Error mssge as Number Range Object for Char ZTXLEVAIN doesn't Exist
can anyone help me
thanks
KINDLY SEND MAIL TO [email protected]
srinivasHI,
check this
Error calling number range object 0MATERIAL for dimension D4 ( ) -
Transporting Custom Number range Objects
Dear SRMers
System Information: ECC 6.0,
We created Z Number range objects for Eforms in ECC system A , created a Transport Request with the tasks containing the individual Number range objects and, released the transports in SE10 and transported them to ECC System B (with Basis Admin help).
After the moving the transports, we see the individual custom objects in System B, but the number ranges defined are missing for each object. The Basis admin tried couple of approaches but was not successful.
If any one has come across, this problem, please advice.
Points will be rewarded for answers.
Thanks in advance,
Best Regards,
BobHi,
In transaction SNRO enter the Z number range.
Press the "Number Range" button (F7)
Press Interval-->Transport.
That should create a transport for you.
Cheers
Rob
Maybe you are looking for
-
How do I "add another email address" to FireFox Sync
Please know I am a 65yr old female neophyte. I am lucky I can follow directions and try to find answers on Firefox, which I love to try to use. '''Please excuse these questions -- A PhD in personnel/ administration is not an indicator of how ignorant
-
To find out BADI implementation for a standard transaction
Like for User Exit is there any standard code to find the BADI implemetation for a Transaction Code. If so please paste the code.
-
Transferring standard HR Idoc fields to CRM Central Person via ALE
Hello experts! Here is a description of a scenario I would like some help with please. We have a fully functioning standard ALE distribution of HRMD_ABA05 IDoc from an HR Instance to a CRM Instance. The integration is maintaining Central Person data
-
I want to put a phone number in to a cell 01273 but the 0 keeps disapearing
i want to put a phone number in to a cell 01273 but the 0 keeps disapearing what am i doing wrong.
-
HT204023 Is it possible to delete other devices that are connected to your personal hotspot?
When I turn my personal hotspot on I have quite a few people that are already connected to my personal hotspot connecting automatically and I don't want them. Is there a way of resetting it so people don't automatically connect?