Problem in opening the WEB Nokia 9300

In my new Mobile Nokia9300, When I try to open WEB I am getting the following message
"unable to find the specific object"
Can you please help on resolivng the problem.
Thanks,
Suresh

Format the phone! Check also if you have the last FW inside.

Similar Messages

Problem while opening the Web Service Homepage

Hi All,
I have created a Web Service and in Tcode WSADMIN , I am trying to open the Web Service Homepage (Ctrl+F8) and getting an error message "Could not determine WSDL Address(ICF Error)".
Please suggest...
Regards
Pravesh

Hi,
In transaction SICF
/sap/bc/bsp/sap/learning_map
Choose Activate Service from the context menu.
Also refer this thread.
Solution Manager Learning Map http error 403
Regards,
Sarvesh

Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

Safari keeps giving and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
It only seams to have a problem with https sites.
Any help would be appreciated

The "s" in "https" indicates the site is a secure server--usually a site that will require a password. Connections to secure servers can be blocked by parental controls. Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)? If so, check the settings to make sure they will allow the connection.

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

I started my ipad in wifi but didnt open the web page, what is the problem?

i started my ipad in wifi but didnt open the web page, what is the problem?

Your iPad is probably not connected to the Internet.

Executing the planning function while opening the web interface

hello all,
I have created a planning area based on multiprovider.This multiprovider is based on two transactional cube ie,COPA cube and Cost Center cube.
This planning area is meant for enabling integrated planning.One plans in COPA cube and other plans in Cost Center cube the income statement gets planned based on this two.
I selected planning items in multiprovider layout to display the income statement.The layout is as follows:
PlanningItem Amount
Net Sales: 9.000,00 INR (This comes from COPA)
Sales Overheads: 200,00 INR (This comes from Cost Center)
Depreciation: 200,00 INR (This comes from Cost Center)
Other Expenses: 300,00 INR (This comes from Cost Center)
EBIT: 0,00 INR
Interest Income: 0,00 INR
Interest Expense: 0,00 INR
Operating Income: 0,00 INR
Taxes: 0,00 INR
Now EBIT planning item is to be calculated from the planning items as follows:
EBIT = Net Sales-Sales Overheads-Depriciation-Other Expenses
For this i have created a planning function which calculates EBIT.This function works properly,there are no issues in it.
My problem is that i want this function to be executed as soon as i open the web interface for my planning application and the result should be as follows:
PlanningItem Amount
Net Sales: 9.000,00 INR (This comes from COPA)
Sales Overheads: 200,00 INR (This comes from Cost Center)
Depreciation: 200,00 INR (This comes from Cost Center)
Other Expenses: 300,00 INR (This comes from Cost Center)
EBIT: 8.300,00 INR
Interest Income: 0,00 INR
Interest Expense: 0,00 INR
Operating Income: 0,00 INR
Taxes: 0,00 INR
Can anybody suggest how to go about this problem?
Thanks in advance.
regards,
Yogesh

Hi Yogesh,
as far as i know, there is no standard functionality for that purpose, but there are workaround for it.
1. Modify the BSP Application.
 Go to SE80 --> Repository Browser --> BSP Application --> your WI name --> page with flow logic --> double click on page1.htm --> Event handler tabstrip --> on the drop down selection press F1 --> add a function module that call you BPS function in specific event (e.g: OnInitialization).
2. Use WI-Exit Class / WI-Extention (ABAP OO).
Here you need to create sub class from Class: CL_UPWB_BSP_APPL, and assign the class to your WI. You can then add a function module that call you BPS function in method:
2.1. Load --> performed only once on intial execution of WI.
2.2. Initialisation --> called once for each server response.
2.3. Dispatch --> called at each action and also for each WI component.
You can see further information in SAP how to paper:
How to Validate manual input in WEB planning application, New BPS-Features delivered with SAP BW 3.5, etc.
You can call your BPS function with BPS API FM (See F.Group: UPC_API)
But there is also more easier way to realize your ebit calculation. If you define your EBIT calc. manually in layout (define with manually defined Lead column). With this way, You will always get your EBIT analog with inputed values.
Then you add your EBIT calc.function to Layout Component in WI in property: 'Function After Data Change'.
Best Regards,
Suan Liono

Open the Web Console when a pop-up opens

Suppose I am working with a webpage and I have the console open.
Then, I click in an element, and the javascript code that handles the event decides to open a new window.
That window does not have the console open, so I miss some details of the http traffic, etc.
What I am doing now is to hit Ctrl+Shift+K as fast as I can, or use Fiddler.
But there must be a setting somewhere where I can say "Always open the console when a new window is open", Right?
I googled a bit, but I couldn't not find an answer.

Hi bcartolo,
Not a problem. You can open the Web Console by first going to Tools > Web Developer Tools > Web Console
Then try [https://addons.mozilla.org/en-US/firefox/addon/firegestures/ Firegestures] to customize this.

Getting error while trying to open the web forms in classic planning app

hello,
I am new to OTN forum. can someone please help me to resolve my issue in classic planning application.
i have created two web forms in classic planning . but while i am trying to open the web forms ,its showing the error like
the" data form Report1(Report name) is invalid. Check log for details.
i have checked the log file also but was not able to understand the errors.
Before this i have tried lots of things to make this issue fixed like updated JVM size then in task manager i have checked the memory usages for process .
but these were not helpful to solve.
Kindly anyone suggest me the solution.......

It is probably worth refreshing the metadata to see if that fixes the problem; error message might indicate that the form has members on that have not yet been passed to Essbase.
You dont give the version you are using, but for v11.1.2.1 you do this through Workspace, menu options Administration/Application/Refresh Database - tick Database and Refresh. Its advised that you back up your Outline and data before refreshing.
Hope this helps.
JB

I'm Having problem sharing to the web?

fcpx Imac 16gb ram. I'm having a problem sharing to the web. Even with projects that I succesfully shared in the pass on vimeo. now nothing works. I tried to upload from vimeo and it didn't work either.
When I share it goes in waiting mode and stay there for houres and nothing ever happen. Help please
John

Have you tried closing the Settings and Contacts apps completely and seeing if they work ok when re-open them ? From the home screen (i.e. not with Settings or Contacts 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Settings and Contacts apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I can open the web site (Chemistry) but the links within won't work, however they will in Google Chrome

I can open the web site (Chemistry) but the links within won't work, however they will in Google Chrome.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

ITunes U Course Manager will not open on my PC. When I open the web address the page loads blank.

iTunes U Course Manager will not open on my PC. When I open the web address the page loads blank. Would like to design a new course.

Try to using the latest version of Safari Browser or Mozilla Firefox.

Open the WebI report from Xcelsius dashboard

Hi All,
I would like to know how to open the WebI report from the xcelsius dashboard.
Looking at the previous posts I followed the following steps to implement the same but that is not working.
Inserted the component URL button and used the folowing link:
http://servername/OpenDocument/opendoc/openDocument.jsp?sType=wid&sIDType=XXX
But this is givingerre: " Internet Explorer cannot display the webpage"
Also, tried the copying the reprot link, but that is opening the Infoview login page.
I want the report to opened when we click the URL button.
Could someone please provide me a solution.
Thanks in advance.
Regards
Sindhu

did you try passing the iDocID parameter? When prompted did you try to login to InfoView and check whether Report gets displayed?
Ideally the URL should be as below:
[http://<server>:<port>/OpenDocument/opendoc/openDocument.jsp?iDocID=<cuid_of_the_document>]
If you want to bypass the logon screen,you need to modify the OpenDocument.jsp to pass logon token to the above URL i.e.token=+token where the +token is being retrieved by sdk.

Problem in opening the package indesign

Hi guys, need help one of my client having problems in opening the indd package I have sent to them via ftp, the files are compressed in a zip file. Then I try to download the zip package, it opens and works well. I'm using CS3 windows base by the way.

Hi Bob,
Just to fill you in, the client and I have the same version of Indesign CS3 only I’m working on a PC platform and the client on Mac. The indesign files we have been working is been updated monthly, on the previous months of exchanging files we did not encounter this problem only now. I already check the file that is been upload and open it on my Mac the indesign file work fine at my end, but on the clients it does not open and the indesign application closes. We did come up with a temporary solution which exporting it in INX. On the clients end this works. But we want this out in our process to cut time and I want to know how this happen and how to avoid.
Sorry for the late reply.

Problem in opening the file

I have a file I have problems in opening the file
The file exists in this link
http://www.multiupload.com/ZOQT6RW8PK
When I open the file shows the following messages
I used All Adobe Reader versions, But no avail
I need a quick solution
Waiting for your reply

You may contact the support of the creator of this plugin.

TS1702 hello, i have problem to open the need for speed2

hello, i have problem to open the need for speed2

There is no "Add-on" that I'm aware that will allow you to EDIT .pdf files for FREE. Editing .pdf is using a Paid Feature in pdf programs (Adobe Acrobat ProX & FoxIT PDF.)
[http:// https://addons.mozilla.org/en-US/firefox/addon/pdfescape-extension/ PDFEscape] is "Add-on" in a sense, but it actually just opens the .pdf file on PDFEscape.com

Problem in opening the WEB Nokia 9300

Similar Messages

Maybe you are looking for