Problem in ORACLE 8i Installation.

We have the problem of installation of ORACLE 8i on Windows 2000 Evaluation version.
It gives a problem while creating the database.
It give the error messages as 'unable to create control file' and the reason given is access denied.
I am logged in as administrator and have all rights on the m/c, yet it gives the above problem.
thanks,
With regards,
zuber
email: [email protected]
null

Thanx for ypur help.
I have checked. I do possess full administrator rights but stillthat problem exists. In my oracle 8i cd that file (symcjit.dll) exists only once.
What else i may do?

Similar Messages

Problems with oracle 9i installation in windows xp

I am having a problem with oracle 9i installation. I am getting error message like this "jrew.exe has encountered a problem and nees to close" can any body tell how to overcome this problem. I have cleaned registry also. I uninstalled java runtime environment and again installed java but i am still getting the message.

Hi Madhu,
The problem seem the "jrew.exe" file may be currupted.
Remove the file "jrew.exe" and try to reinstall Oracle.
Regards,
RKumar

Problem with Oracle during installation of NW

Hi all,
I have to install SAP NW on one host(for example IP 192.168.2.2) with the Oracle being installed on different host(for example 192.168.2.3) but the installation od database instance fails. Installator can not connect to Oracle on different host. Could you pls help me with configuration of Oracle to be accessible by SAP NW installator. I think that it is the problem, because setting up SAP NW installator is clear and easy. Both hosts are running on Windows.
Thanks Gary

Hi Pascal,
finally forum is up
part of the log is
ERROR 2005-07-11 17:54:55
FKD-00034 Query returned more than one result.
ERROR 2005-07-11 17:54:55
FKD-00035 Query did not return a result. Select attribute WHERE WapsSystemName = getContextParameter ('WapsSystemName' ) AND WapsInstanceType = 'DB' , statement: <#1>
ERROR 2005-07-11 17:54:55
FKD-00029 Subselect for table t_SAPComponent_Waps_Instance_SHARED, column WapsInstanceOSFAName with WHERE clause WHERE WapsSystemName = getContextParameter ('WapsSystemName' ) AND WapsInstanceType = 'DB' failed.
ERROR 2005-07-11 17:54:55
MUT-02010 Internal error: Access to key db failed. Original message: Subselect to table >t_SAPComponent_Waps_Instance_SHARED< column name >WapsInstanceOSFAName< using where clause >WHERE WapsSystemName = getContextParameter ('WapsSystemName' ) AND WapsInstanceType = 'DB' < ends with an exception. ExceptionText :single select returns more than on row .
WARNING 2005-07-11 17:54:55
The step dialogGetCommonParams with step key SAPSYSTEM_DB|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|DatabaseCommonParameters|ind|ind|ora|ind|ind|0|dialogGetCommonParams was executed with status ERROR.
I am not experienced in oracle configuration, so it is possible that the problem is with the litener.
If you have any idea, please let me know. Thanks
Gary

Problem with oracle 8i installation on windows 2000 pro

Hi all
i'm installing oracle 8i enterprize edition on windows 2000 professional.
At the end of the installation,in the configuration tools step when it says that
the following tools will be automatically started for you etc...
the oracle database configuration assistant keep failing and i get the following message in the text file dbSilentCreate
< 8I\starterdb is an invalid command line argument. >
what should i do? anyone familiar with this problem ?
Constancio

This should be a workaround for your problem. Let me know if it works or not.
1. Create a temporary directory on your server.
2. Copy the contents of the Oracle RDBMS Server CD to the temporary directory created in step 1.
3. Search the directory structure created in step 1 for the existence of the filename symcjit.dll.
4. Rename each copy of the symcjit.dll to symcjit.old.
5. Run the setup.exe from the \install\win32 directory and install Oracle 8.1.x.

Problems with Oracle 9i installation on Linux

Hi guys
I am trying to install oracle 9i enterprize edition on Linux server 9.0, everything goes smooth until at the very last when it comes to installing the tools, it gets stuck there and does not go ahead. I gave it over 6 hours of time but no response. Can anyone help please or if someone has come with problem like this. Any thoughts?
Thanks
ZY

Hi,
your query can be better answered in the following forum section :<br>
Database Installation
<br>
regards,
Varun Narang

Oracle 10 installation in linus ES4 platform

Hello experts,
I am getting problem in oracle 10G installation at Linus ES 4 (2.6.9) OS.
Its Installing upto 62 % and issuing error in invoking target ‘ntcontab.0’ of making file ‘/opt/oracle/network/lib/ins_net_client.mk’
If I am ignoring this file and continuing its giving error in such many files …
I don’t know where the problem is ????
My environmental variables settings are :
Export ORACLE_BASE=/opt/oracle/
Export ORACLE_HOME=/opt/oracle/
Export LD_ASSUME_KERNEL=2.6.9
Export LD_LIBRARY_PATH=/opt/oracle/lib:/lib:/usr/lib
Or is any problem in linus version and oracle campatability

Please check metalink note 464994.1
And look into installActions.log for more details around this error.
If metalink note doesn't help, then post installActions.log with error messages here.

Use of Oracle Universal Installer?

I am trying to install Oracle Developer Suite 10g (I have already Oracle 10.g installed) - however I get (after message that all requirements are met, so - installation can proceed):
'setup.exe has encountered a problem and need to close. we are sorry for the inconvenience..... Please tell Microsoft about this problem'.
Oracle Universal Installer version: 10.1.0.2.0
Oracle Deveoper Suite: 10.1.2.0.2 (so - a bit higher - is this acceptable?)
WinXP, default JRE 1.5_1
I can run OUI as standalone application - so - maybe I can simply run it and ask it to install Developer Suite? But as I understand - I should point to some xml file where products for istallation should be specified - but on installation disks there i no any (there is onlu setup executables). Where can I find them? Or should I upgrade to higher version of OUI?
Thanks for any advice in advance!
OK - I find products.xml file - and I got messages:
1) error while loading areasQueries library
2) I should upgrade to OUI 10.1.0.3.0 or later - where can I download it?
Message was edited by:
user454720
OK - now I searched on yahoo for Oracle Universal Installer download - there are some discussion in forums where it is recognized that standalone download of specified OUI isn't available from Oracle website
Message was edited by:
user454720

you have to change the port no in listener.ora file which exists on Oracle_home/network/admin/listener.ora like
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = Griat-xp.bebo.tech.com)(PORT = 1521))
)from this to
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = Griat-xp.bebo.tech.com)(PORT = 1522))
)afterwords you have to reload the listener by using lsnrctl on command prompt
in this way you can change the default port of Oracle
Regards
Singh

Oracle 10g Installation Problem on SUSE Linux 10

Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root    0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda10             2104376     73112   2031264   4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. Shroff

Hi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM

Oracle 10g Installation Problem in HP-UX 11.31

Hi
I am installing ERP 2005 SR2 on HP-UX 11.31 OS with ORACLE database. When I am running ./RUNINSTALLER getting following error. Error Log as follows
Using paramFile: /oracle/stage/102_64/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.31
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2008-07-16_11-26-39AM/installActions2008-07-16_11-26-39AM.log
When I look into oraparam.ini file from given path found entries as follows
[Certified Versions]
#You can customise error message shown for failure through CERTIFIED_VERSION_FAILURE_MESSAGE
Solaris=5.6,5.7,5.8,5.9
Linux=redhat-2.1AS
HPUX=B.11.23
Decunix=V5.1A,V5.1
AIX=5.1.0.0
[HPUX-B.11.23-required]
#PATCHES required by JRE and Product, /usr/sbin/swlist -l patch gets list of patches on system
PATCHES=
#PACKAGES required by JRE and Product, /usr/sbin/swlist -l product gets list of packages on system
PACKAGES=
#Patch bundles required for Oracle.
#/usr/sbin/swlist -l bundle gives list of bundles.
#Each item should follow the format "bundle:version"
#ex.,GOLDBASE11i:B.11.11.0106.9,GOLDAPPS11i:B.11.11.0106.9
BUNDLE=
#Minimum swap space required by OUI, Increase it if your product installation so requires
SWAP_SPACE=250
TEMP_SPACE=250
BUNDLE_FAILURE_MESSAGE=Some patch bundles were not found on the system. Please verify if the system is at a higher bundle level.
Please let me know how to overcome this problem.
Regards
Jayakar

Hi ,
If anyone come across this kind of errors don't try to perform any workaround which is not recommended by sap as later in post installation steps there will be errors so please go through below SAP note as it has some workarounds recommends by SAP
Note 980426 - Oracle 10.2 Software installation on new operating systems
Shanaka.

Oracle 9iAS Installation Problem on HP-UX - f90servlet, hangs

PLATFORM: HP-UX 11i (Server)
-------- Windows XP, NT (Client)
INSTALLATION:
1. On a HP box, using oracle installer, installed Oracle 9.0.2 Infrastruture successfully. Installation & configuration went with no errors.Used JDK 1.3.1 build (1.3.1.02) for installation.
2. On the same HP box, using oracle installer, installed Oracle 9.0.2 Business Intelligence (Forms & Discoverer) successfully. Used JDK 1.3.1 (build 1.3.1.02) for installation.
3. Loaded Jinitiator 1.3.1.8 on the client platform
(Windows XP).
PROBLEM:
While trying to access
http://hpbox:7778/forms90/f90servlet, we see the following line on the Java Console.
"Downloading http://hpbox:7778/forms90/java/f90all_jinit.jar to JAR cache". The browser keeps showing "Loading Java Applet". When i look at the Cache location, i see the file f90all_jinit.jar-4cf20c5f-178c08b8(zipped). The size of this file stays the same even though browser keeps spinning. Not sure what is going on. I've verified that the Forms servers is still running on the HP box.
Tried Jinitator 1.3.1.6, 1.3.1.8, 1.3.1.9 and 1.3.1.13. We've also tried Windows XP (IE6) as well as Windows NT (IE5). Same result on all the platforms.
Had spent a LOT of time trouble shooting this problem. Any help is highly appreciated.
thanks,
Jegan

Thanks a lot Wayne !
I tried with "./server.....bin -mode=console". I am facing the same problem.
Although weblogic installation completes, it still just hangs at "Copying JDK....".
Giving the output below for your reference.
Choose Product Directory:
->1| Yes, use this product directory [home1/utils/bea/weblogic700]
2| No, select another product directory
Enter index number to select OR [Exit][Previous][Next]>
<------------- WebLogic Platform Installer - WebLogic Platform 7.0.1.0 ---------
---->
Copying files..
0% 25% 50% 75% 100%
[------------|------------|------------|------------]
Copying JDK....
I am also attaching the top output with this message.
Thanks,
Soundar
"Wayne W. Scott" <[email protected]> wrote:
When all else fails, read the manual! The method changed from 6.1 to
7.0.
http://edocs.bea.com/platform/docs70/install/index.html
http://edocs.bea.com/platform/docs70/install/index.html
../filename.bin -mode=console
/wws
Soundar wrote:
Hi,
I am trying to install Weblogic 7.01 evaluation copy on HP-UX 11.00.After exporting
DISPLAY variable to my workstation, when I run "./server701_hpux.bin",the extraction
of the files is successful, followed by some warning messages regardingthe fonts
and then the BEA Weblogic startup screen comes up. But it hangs thereforever.
I am attaching the output. If I run "./server..." in text mode i.e.without
exporting DISPLAY variable, although the installation of Weblogic softwareis
successful, but it hangs at "Copying JDK..." i.e. hangs at JDK installation.
I already have JDK installation on my HP-UX system (1.3.1_02).
If someone knows how to solve this problem, please let me know. Also,as I already
have JDK installation on my system, is it possible to disable JDK installation
in weblogic installation.
Thanks in Advance.
Soundar
[weblogic_top.txt]

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Suse 9 oracle 10g installation DHCP-assigned public IP addresses problem

Hi,
I got below error when I have tried to install Oracle 10gR2.
I have checked # hostname, it is Ok. I setup network to use static Ip.
I checked /etc/hosts. Does oracle get hostname another file?
How can I solve my problem.
Thanks.
Recommendation: Oracle supports installations on systems with
DHCP-assigned public IP addresses. However, the primary network
interface on the system should be configured with a static IP
address in order for the Oracle Software to function properly.
See the Installation Guide for more details on installing the
software on systems configured with DHCP.

Hostname command should return the fully qualified hostname as shown below:
% hostname
hostname.domainname

Oracle 10g installation problem on redHat

Dear pals,
Hi, I got an error while installing the 10g into my redhat machine. My redhat should be supported, but not know what is happened...
./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /ora/oraInventory/logs/installActions2004-03-31_11-39-25AM.log
The error log show the same thing thus nothing can help.
My Redhat version is:
Linux version 2.4.20-8 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
Is there anyone can help? Thank you very much in advance.
Regards,
Eddie

Werner Puschitz has a good home page (sorry, I forgot the link) on that:
su - root
cp /etc/redhat-release /etc/redhat-release.backup
cat > /etc/redhat-release << EOF
Red Hat Enterprise Linux AS release 3 (Taroon)
EOF
It works for me on RH9.0. Change redhat-release.backup to
redhat-release after you are done with your installation.

9i's Oracle Universal Installer problem in W2K server! Please Help.

Hi all,
I am trying to install Oracle database 9i on my w2k server (domain controller). The Oracle Universal Installer quits right after I choose install in autorun menu with this message:
'Error in writing to directory C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall. Please ensure that this directory is writable and has at least 25 MB of Disk Space. Installation could not continue.'
I am installing as the administrator of the domain/server and I have 17GB left on my harddisk. I am using a P3 600 with 384 MB of RAM. My HD is Seagate ATAIV Baracuda and my motherboard uses VIA chipset.
Thanks in advance for your help.
Regards,
Hartono

I am using Diamond TNT2 video card. I have tried to install new (not newest) detonator drive and VIA 4 in 1 driver ver4.29 but it still gives me the error. Would it help if I install Java2 runtime on this computer?
Regards,
Ari

Problems with exporting display for oracle apps installation

Platform : RedHat Enterprise Server 4
I'm trying to do a 2 tier installation of Oracle Applications.
As part of the install, I need to generate a display that can be used by the applmgr user, but bellongs to another user.
When running the following command line, I get an error message.
xauth -f .Xauthority extract - $DISPLAY | rsh -l applmgr localhost /usr/X11R6/bin/xauth merge -
connect to address 127.0.0.1: Connection refused
Trying krb4 rsh...
connect to address 127.0.0.1: Connection refused
trying normal rsh (/usr/bin/rsh)
localhost: Connection refused
Does anyne have an idea? I've done some troubleshooting, but I can't figure out what is wrong.
I have added the following in the xmgr and applmgr's profiles
DISPLAY=localhost:13
export DISPLAY
The vnc server runs on display 13

These are the scripts/files I'm using for installing Oracle Apps 11.5.10 on CentOS 4.2 (RedHat Clone) - hope it helps:
install.sh - adds necessary packages
yum install libaio
yum install openmotif
yum install gcc
yum install gcc-c++
mv /usr/bin/gcc /usr/bin/gcc344
mv /usr/bin/g++ /usr/bin/g++344
rpm -iUhv compat-gcc-7.3-2.96.126.i386.rpm
rpm -iUhv --nodeps compat-gcc-c++-7.3-2.96.126.i386.rpm
ln -sf /usr/bin/gcc296 /usr/bin/gcc
ln -sf /usr/bin/g++296 /usr/bin/g++
setup.env - Setup paths
# Oracle Setup Environment
ORACLE_SETUP_APPS=/setup/oracle/install/ebusiness/startCD
ORACLE_SETUP_PATCH=/data/setup/install/db
oracle.env - Installation environment
# Oracle Environment
ORACLE_BASE=/d01/oracle
ORACLE_HOME=$ORACLE_BASE/visdb/9.2.0
ORACLE_VAR=/var/opt/oracle
ORACLE_SID=VIS
ORACLE_TERM=xterm
# export TNS_ADMIN= Set if sqlnet.ora, tnsnames.ora, etc. are not in $ORACLE_HOME/network/admin
NLS_LANG=AMERICA_AMERICAN.UTF8
#ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
export ORACLE_BASE ORACLE_HOME ORACLE_SID ORACLE_TERM NLS_LANG ORA_NLS33
LD_ASSUME_KERNEL=2.4.19
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
export LD_ASSUME_KERNEL LD_LIBRARY_PATH
# Set shell search paths
export PATH=$PATH:/usr/sbin:/sbin:$ORACLE_HOME/bin
oracle - Kernel Parameters
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem    = 250 32000 100 128
fs.file-max   = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max     = 262144
net.core.wmem_default = 262144
net.core.wmem_max     = 262144
setup_oracle_1.sh - Installation Step 1 : Add oracle user
#!/bin/sh
PATH=$PATH:/usr/sbin
groupadd dba          # group of users to be granted with SYSDBA system privilege
groupadd oinstall     # group owner of Oracle files
useradd -m -c "Oracle software owner" -g oinstall -G dba oracle -s /bin/bash
passwd oracle
setup_oracle_2.sh - Installation Step 2 : Prepare installation directory
#!/bin/sh
. ./oracle.env
BASE_DIR=/`echo $ORACLE_BASE | cut -d'/' -f2`
mkdir -p $ORACLE_BASE
chown -R oracle:oinstall /$BASE_DIR
chmod -R 775 $BASE_DIR
mkdir -p $ORACLE_VAR
chown oracle:dba $ORACLE_VAR
chmod 755 $ORACLE_VAR
setup_oracle_3_apps.sh - Installation Step 3 : Start installer
#!/bin/sh
. ./oracle.env
. ./setup.env
sysctl -p ./oracle
su oracle -c "export DISPLAY=:0.0 && $ORACLE_SETUP_APPS/Disk1/rapidwiz/rapidwiz"There are some steps afterwards, but with this I'll usually end up with a complete installation.
C.

Problem in ORACLE 8i Installation.

Similar Messages

Maybe you are looking for