Problem in order no.

Hi experts,
I am facing a problem that in sales order not showing manual option in order dropdown list.
Thanks n Regards
Gyan Piyush

Hai!
What version of SAP B1 you are using?
Check what is the default series for SO to that user?
Check the Period indicator of Default series and Current Posting Period - Period Indicator's are same?
If u have choosed that option then, u can't assign same numbers for Diff Documents,
For what reason you have enabled that?
Regards,
Thanga Raj.K
Edited by: Thanga Raj K on Jun 16, 2009 12:35 PM

Similar Messages

Problem with order in iPhoto

problem with order in iPhoto. I can't buy a card, because there comes an Message "Ihre Karte enthält offenbar Standardtext, der noch nicht bearbeitet wurde. Gedruckte Karten enthalten diesen Text nicht. Möchten Sie fortfahren?" What should I do?

That message means that you have text boxes that have not been used. The holding text that appears in the box will not be printed. But if you want to get rid of the warning just put a space in the text box.
OR, check to see if the card layout has the same page but without a text box. Most do.
OT

Problems submitting order via iphoto

Hi,
I have a problem placing orders with iphoto. Ordering procedure ok till sending files. Then nothing happens. Internet, email, itunes, account everything ok. security - firewall ok. husband is having same comp. and no problems with his or my account when ordering prints, calendars or books. on my computer its seems impossible. ilife 08 already removed and reinstalled, problem stays the same. helpdesk till now unable to help me.
I hope some one can help me, and if possible ASAP
Thanks

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
Regards
TD

Hi, I have problems in ordering book from iPhoto. It says "problems in getting contact with Apple Online Store" I have changed password on my Apple ID - could that be the problem ??

Hi, I have problems in ordering book from iPhoto. It says "problems in getting contact with Apple Online Store" I have changed password on my Apple ID - could that be the problem ??

Some additional efforts you can try:
Go to the System/Sharing preference pane and make sure Remote Apple Events is checked.
If it is, uncheck it and then recheck and try ordering again.
OT

Problem in order by in forms

hi guys
i m having a problem in ordering by in a detail block .
actually i have a dummy block on whose basis records are populated in a detail block the
when_button_press has
go_block('x');
execute_query;
there is a where clause in the block level and no order by clause.
althogh the query which is generated by forms when run on sql gives me the desired result but not in the forms.
also for elaboration the ordering is to be done on the basis of another table which stores the display order for the records so when I tried using both tables in the forms block QUERRY DATA SOURCE NAME and joined the 2 table in the where and order by caluse of the block level and the column source at the field level was given table_name.column_name but the query build by the form inclued the rrowid for the table whICH i CAN NOT alias so there was a problem in the query genetration and hence the result
please tell me what is the problem here...
thankx
dg

ok guys dont scratch ur heads the problem has been solved
thankx anyway
dg

Problems with 'Order Prints' from Aperture 2.1.3 Mystery borders

*Some background:*
I've been using Aperture for about 3 months now, importing most of my iPhoto library into the program. I have only recently started shooting in RAW format, most of my photos image files are in JPG format. In the past, I've had no problems with obtaining prints from within iPhoto or to a limited extent Aperture. So, far as I know my program is up-to-date. I have 2 plugins installed: Aperture2twitter and *flickr export Lite* both of which work acceptably.
*The problem:* I ordered 317 4×6 prints from my aperture library.
Every photo has a 1/4″ border on both sides of the image, i.e. the printed image is only 4×5 1/2″. I have never ordered this quantity before, but I don’t believe that was the problem, it appears that the processing machine was misaligned and no one reviewed the prints prior to shipping.
I tried again, on 4 different images ... all JPG files with 3 out of 4 were OK, but one exhibited the "border" issue.
I haven't a clue what is going on here. Apple implied +(via email)+ that I would have to individually crop every photo to ensure proper aspect ratio. This makes no sense to me at all, as I have never had this kinda problem before.
Could the plugin(s) be interfering with the s/w? Is there a trick to having photos printed from within Aperture that was not present in iPhoto?
Any thoughts on what the problem is would be greatly appreciated.
Thanks
-john

I believe that I've solved this problem, with the help of the folks at Apple who handle Aperture tech support using the Aperture support ID that came with the product.
So the short answer is: Aperture print services REALLY DO REQUIRE the image to be cropped (constrained as they say) prior to the data being sent to Apple Print services.
Here is the link that describes cropping http://support.apple.com/kb/HT1993?viewlocale=en_US
The process as described is cumbersome, but the support tech pointed out that in Aperture, crops are 'non-destrutive' and can be undone simply by removing the check mark on the Adjustments tab of the image you crop. *This means that you do not have to make a duplicate image for cropping.*
So, here is the process that I arrived at to ensure that my "order prints" job turned out:
1. create an album of all the photos you want to submit for printing.
2. for each image call up the Crop HUD by pressing 'c' on the keyboard.
3.select the aspect ratio that you want for your photo. Make sure that it does NOT SAY Master Aspect Ratio, or Main Display Aspect Ratio.
4. Crop the photo
on the adjustments tab you can see the X and Y data and Height / Width information which can be undone.
5. Submit your print request to Apple for all the cropped photos.
When the prints arrive, you can compare the prints with the submitted photos. They should all be good. You can then delete the album (since it really is not a physical thing) or keep it for reference.
It all seemed a bit arcane to me, as I never had to worry about this in iPhoto. It must be that iPhoto sends different data than Aperture. I have just received 200 + prints back from Apple Print Services with about 98% success rate. I just have to adjust my thinking and my process when dealing with Aperture.

Problem with order by clause

Hai all,
I have problem with order by clause,
My query is
"select number from table1 order by number asc "
and the output is displaying as
1
10
12
13
15
17
19
2
20
21
22
But if we give order by it should display as below only right ?
1
2
10
12
13
15
17
19
20
21
22 ........
Please help me why it is not displaying like it. and how to make the statement to display like the second case. Thanks in advance.
Regards,
Uraja

The column datatype that you are selecting is not of NUMBER datatype(might be char or varchar2) hence you are getting such result set.
And for this purpose, it is recommended to set datatype of a column appropriately.
For now you can add TO_NUMBER function to column in ORDER BY clause, only if it has data of number type.
Edited by: Ora on 19 Nov, 2012 3:10 AM

Problem with order data

Hi, I have a problem with order data. A string column has these values:
A....
B....
PSTA-FRA
PSTA+FRA
Q....
R....
If i order data directly from db ( select column1 from table order by column1 ) , i obtain this result:
PSTA-FRA
PSTA+FRA
If i create a simple report on that table and order on that column the result is:
PSTA+FRA
PSTA-FRA
I can obtain correct output if I set parameter 'Perform group on server' but if i write a selection formula :
{table.column} >= 'PSTA+FRA'
record containing PSTA-FRA value not appear.
I've tried both with Crytal 8.5 and Crystal 11 R2 sp6, database is Sybase SQL Anywhere odbc connection.
Thanks in advance

Ordering is done according to the ASCII values of the characters.
In R2 create a new report and log onto your DB and select Command for your data source. Paste in the SQL you use to get the data in the order the server users. Then you don't have to use CR to do the sorting. DB Servers are much more efficient at collecting the data than CR is.
Thank you
Don

Problems in order to build DarkRadiant editor

Hello gentlemen, I have problems in order to install DarkRadiant From source.
DarkRadiant is the map editor for the Darkmod Project, a modification of Doom3.
The problem is that when I do:
./autogen
./configure
the terminal shows me this:
checking for the toolset name used by Boost for g++... configure: WARNING: could not figure out which toolset name to use for g++
checking boost/regex.hpp usability... yes
checking boost/regex.hpp presence... yes
checking for boost/regex.hpp... yes
checking for the Boost regex library... yes
checking boost/system/error_code.hpp usability... yes
checking boost/system/error_code.hpp presence... yes
checking for boost/system/error_code.hpp... yes
checking for the Boost system library... yes
checking boost/filesystem/path.hpp usability... yes
checking boost/filesystem/path.hpp presence... yes
checking for boost/filesystem/path.hpp... yes
checking for the Boost filesystem library... yes
checking for boost/system/error_code.hpp... (cached) yes
checking for the Boost system library... (cached) yes
checking for python-config... python-config
checking boost/python.hpp usability... yes
checking boost/python.hpp presence... yes
checking for boost/python.hpp... yes
checking for the Boost python library... no
configure: error: cannot find the flags to link with Boost python
And I can't compile it,
I have tried using AUR but it is even worst, the package installs correctly, but when i run the editor:
segmentation fault.

If it built from AUR why do you you think you'd get a different result from building it manually? All that makepkg does is run the commands needed to build it.
That said, if you want to do it yourself, you should look at the PKGBUILD to see which commands are needed. Use autoreconf instead of autogen, modify the configure script, set the environment variables, and pass the right parameters to configure.
Edit: I just built it from the AUR. I got segfaults after it started when it tried to load files that don't exist (/usr/local/game/doom3). This is an upstream bug, report it there.
Last edited by Trilby (2012-09-20 12:28:21)

Report a problem to order id MHLW0L1YLJ

Report a problem to order id MHLW0L1YLJ

Wrong place....
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Problem with ordering in select query.

Hi,
We have the following query:
SELECT s.surveyid, m.messageid, m.text FROM MS_SURVEY s, MS_MESSAGES m where (m.messageid=s.survey_desc or m.messageid=s.survey_heading or m.messageid=s.user_profiles) and s.surveyid=xxx
This query selects 3 rows, one for description, one for heading and one for user profiles.
The problem is that, we have 4 databases. 2 Oracle 8.1.5, one Oracle 8.1.6 and one 8.1.7
This query when run on 8.1.7 and 8.1.5 will give us the result in the order:
1...description
2...heading
3...user profile
But, when run on 8.1.6 (which is the client setup of oracle)
The result is in the order:
1...user profile
2...heading
3...description
This project has still not been delivered because of this problem and we are already late by 2 months.
Please somebody let me know why this is happening?
I cannot change the code...as it has been tested for 1 month on staging setup, where it is working fine.
I have no clue as to why this is happening on the Client setup ONLY.
Is it a problem of different oracle versions, or any client side db trigger is there, or any options which the client has selected during his/her db installation or whatever...?
Kindly help.
Thank you.
Regards,
- Ram

Your query has no ORDER BY clause. Oracle does not guarantee (nor does any other RDB that I know of) to return rows in any particular order in the absence of an ORDER BY.
There are many factors that could affect the order in which rows will be returned in the absence of an eplicit ORDER BY clause. Among these are things like order of insertion of rows, access path chosen by the optimizer, the shoe size of the requestor.
You are going to have to change your code if you want a guaranteed order of the records.
TTFN
John

ITunes 7.2 Problem: Song Order Problem

Equipment Specs:
IPOD -- First Generation, 1 G size, Firmware ver # 1.1.5
ITunes -- Ver # 7.2.0.34
Problem
I recently updated to the above version of ITunes. I also recently reset/erased all my songs (no podcasts or nothing else)from my IPOD.
I then reloaded just songs to my pod using the drag and drop method from the music file. I then re-arranged the songs in my desired order.
I then disonnected the pod and exited ITunes.
When I later restarted ITunes with the pod connected, my song order had changed. With the pod still open in ITunes, I am no longer able to change the play order position. As say, move song #45 to position #2 and etc.
Has something changed as I was always able to do this prior to updating ITunes and the pod ?
Was this caused by updating ITunes to the newest version?
Is there a solution to be able to manage the order of your songs as before ?
Can I use a 6.0 version of Itunes inorder to regain this song order problem. I was always able to use this function in a previous version.
Wished I never would have updated to 7.2 from whatever I had. I really should have know better.
Thx
Arc

Solved my problem by reloading ITunes Version 7.1.1.5. Now I can accomplish what I want to do.
Here's an associated thread:
http://discussions.apple.com/thread.jspa?threadID=981696&tstart=0

Problem-planned order start date in the past

I use PP-PI - After MRP run, planned order was created and has exception message "06-start date in the past" its make me wonder because before this problem occur we already tested many time and never found this message(06). then i check in OPPR- field "start in past" is blank, OPPQ- field "Start in past" are not check, OPUZ-Scheduling Type is backwards and field "Start in the Past" is blank, OPU5-Scheduling Type is backwards and field "Start in the Past" is blank.
do any guru know why system not use forward scheduling when found that start date in the past? or have any config of other module which may lead to this issue?
thank in advance.

In OPU5,
Check the setting for correct MRP group which is assigned in material master or in the SPRO node
Production >Material Requirements Planning>MRP Groups-->Define MRP Group for Each Material Type.
check and come back

Problem Purchase order created in SAP R/3 sent in to File XI?

Hi all,
I am new to XI, learning it myself.
I am trying to "send purchase order created in SAP R/3 into XI". For that I am following the document titled as "A Beginners Guide to SAP XI
Settings, Part I ". But I am getting problem in connecting R/3 system to XI system.
I am stuck at very first step in the documentation which says:
Setting Communication ports: in this it asks for "RFC Destination"
Please suggest me the step by step procedure to get through it.
Thanks and Regards,
Ravi

Hi,
go through these links...
1. /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
2. IDOC to File
3. /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
4. /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
5. Re: Idoc to File Scenario
regads,
Ansar.

Group Left report: problem in order the columns

Hi,
I have a Group Left report in report6i with group A and Group B. Group A has columns AAA, BBB, CCC, DDD, EEE, FFF and Group B has coulmn YYY, ZZZ.
The problem is report does not take order by clause. It sort the report by first column of Group A, does not reflect my order by clause.
I created laxical variable in order to change order by clause dynamically.
Any suggestion?
Thanks in advance
Dip

Hi,
I have a Group Left report in report6i with group A and Group B. Group A has columns AAA, BBB, CCC, DDD, EEE, FFF and Group B has coulmn YYY, ZZZ.
The problem is report does not take order by clause. It sort the report by first column of Group A, does not reflect my order by clause.
I created laxical variable in order to change order by clause dynamically.
Any suggestion?
Thanks in advance
Dip

Txt output problem,cannot order the output

Hi,
I'm working with forms and reports 6i, and I have a problem when generating the .txt output.
My report consists in some columns (database-scalar) from the main query and in some columns(formula).
What I'm trying to do is to mix the order of columns (database-scalar) and columns(formula),but
I can't do it. The columns(formula) are always in the end of the output...
I've put the right order in the report editor,but It only works to put the order of the columns (database-scalar) .
Example
query
select a,b,c from..where...
formula colum: desc_a,desc_b
The desired output
a desc_a b desc_b c
The output I get
a b c desc_a desc_b
Thanks in advance

Solved,reading anothers posts found the error.
Just need to play with the "break order" and separating in groups the formula column and the database-scalar colum.

Problem in order no.

Similar Messages

Maybe you are looking for