Problem in output file generation in AL11 tcode
Hi experts,
I am doing one proxy to file scenario.file to be generated as a fixed length format .when i run the scenario, i am getting all the values in output payload correctly in Sxmb_moni and file is also created.But when i scroll upto last to the file generated in ALL11 directory. I am not getting whole values that generated in output payload.In my case my last value is generating in output payload but i am getting trimmed value in file generated in al11 directory.when i save this text file also in local system , i am again only getting trimmed values as seen in All11 directory.when i tried with changing any field length value before that last field with small length(size)value.I am able to see the whole output payload value in file also while scrolling in the file generated in al11 directory
>
deepak jaiswal wrote:
> Hi,
>
> I summed the fixed length of all fields and it's sum comes 515. But it displays me upto length 514 values in file generated in al11 only.
>
> Please help me to reslove this issue.
>
> Deepak jaiswal
Since in AL11 you can have only 256 char in a row, so I hope you will be getting 3 rows in your case. Correct??
First row 256
2nd row 256
3rd row 1
Total 513
So out will be 513 which is correct because from first 2 rows it has truncated 1 char from both rows. Please check your output length again to confirm.
So it is not a problem neither your's nor AL11's. When you write your file at legacy system then it will show the correct data or use FTP adapter and write the file on your local machine to see all the char.
I hope this solves your problem.
Similar Messages
-
Problem in output file generation in AL11 tcode - need quick help
Hi experts,
Scenario:- Proxy to File ( file is generated in AL11 directory folder.
Probelm:
Last field value is generated with correct values in SXMB_MONI output payload, But when I open a file in AL11 the last field fiew value are getting trimmed. Also when I get the dump of file - file also has the same trimmed value.
For example: Expected value in MONI is 12345 where as in AL11 i m getting 1234
I have reduce the length of previous fields and run the scenario again - for this scenario all the values are coming in AL11 as well as in MONI.
Is somthing to do with screen width length.
Deepak Jaiswal.
Edited by: deepak jaiswal on Aug 6, 2009 11:45 AMHI ,
Its a problem with File Transfer tcode sxda_tools and AL11 sometimes. Ask your Basis team to give you file contents from PI Server directly. This file should have right contents as you expected.
I also faced the same problem and wasted lot of time to solve it.
Hence, check the folder where you dump this file on application server and give this path to basis to provide you this file from server.
Regards,
Anurag Garg -
Error message when publishing and problems opening output file
I have 5 projects linked together. When I publish one, I get a message that the files listed below are linked to the open project, and one or more of these projects may require exporting. I have tried to open these files and choose File | Export | Project to | but the options in the list (Flash 8 and Flash CS3) are both grayed out--on every one of these files. I'm publishing to Flash 9.
I didn't think much about this message until a few reviewers said they can't open the project, or when they do, they don't see my playbar on the skin.
One more thing--when an IT person was trying to help one reviewer open the output file, the IT person said "Oh, there's a problem with the code in line 25." I guess that's the html code? I'm not a programmer, but I can look at html code. What should I be seeing there in line 25?
Is their problem opening the output file(s) related to my message about possibly needing to export files? Why might they be having problems getting the output file to open?
Thanks for any insights you can provide!
SAMHi Sam
It depends on a number of things. Are you certain you uploaded all the files involved? If not, there will be problems.
The message about the linked files is quite simply advising you that you have links from that particular movie that will expect to find the files being linked to.
If a person isn't seeing playback controls and you have included them, it's likely you haven't provided the correct link for them to open and play the file. Typically you provide a link to the HTML page Captivate creates. As long as all the output files are in the same place on the server, you should be good to go.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
Problem in output file in unicode system
Hi ,
When we are downloading data from SAP to application server(Unix system)
the output xml file contains # symbol in the begining of the file. we are using
'Open data set dataset name for output in textmode encoding non unicode'.
we have upgraded from SAP 4.7 to ECC6.0 recently . please advice the solution to get rid of this # sign from output file.
thanks & Ragards,
SarathUse the following logic to remove #
constants:c_cr_lf(1) type c VALUE cl_abap_char_utilities=>cr_lf.
then in open dataset after reading string from file use following statement:
replace all occurrences OF c_cr_lf in gv_string WITH ''.
Please reward if useful
Edited by: arunchandra c p on Jul 24, 2008 11:47 AM -
Problem in DME file generation
Hi experts,
I am facing a problem in the generation DME file. Required file format for SPAIN is different to that of the standard file that is generated by executing the standard program RFFOES_T. So I copied that standard program into another and made changes for the new file format in the subroutine DTA_SPANIEN. The file is being generated but with systematically 7 white lines (i.e) blank lines between 2 real lines. Cannot find where the problem lies. Can any one help me in this? Thanks in advance.
Regards,
AshaHi Calsadillo,
The below code says how I have passed the different records to the file
types: begin of t_file,
record(1000),
end of t_file,
begin of t_h1,
rec(2),
trans(2),
field1(10),
crtd(6),
end of t_h1,
begin of t_h2,
rec(2),
trans(2),
paynm(6),
end of t_h2,
begin of t_h3,
rec(2),
trans(2),
payadd(35),
filler(2),
field2(40),
end of t_h3,
begin of t_h4,
rec(2),
trans(2),
matdat(6),
deltype,
contype(2),
filler(7),
end of t_h4.
data : lwa_h1 type t_h1,
lwa_h2 type t_h2,
lwa_h3 type t_h3,
lwa_h4 type t_h4,
lwa_file type t_file.
data : li_file type standard table of t_file.
*Start Filling Record 1
l_count = l_count + 1.
lwa_h1-rec = lc_03.
lwa_h1-trans = lc_56.
lwa_h1-field1 = t001z-paval.
lwa_h1-crtd = '0000000O02XR'.
lwa_file = lwa_h1.
APPEND lwa_file TO li_file.
*Start Filling Record 2
l_count = l_count + 1.
lwa_h2-rec = lc_03.
lwa_h2-trans = lc_56.
lwa_h2-paynm = t001-butxt.
lwa_file = lwa_h2.
APPEND lwa_file TO li_file.
*Start Filling Record 3
l_count = l_count + 1.
lwa_h3-rec = lc_03.
lwa_h3-trans = lc_56.
lwa_h3-payadd = adrc-city1.
lwa_h3-filler = lc_06.
lwa_file = lwa_h4.
APPEND lwa_file TO li_file.
*Start Filling Record 4
l_count = l_count + 1.
lwa_h4-rec = lc_03.
lwa_h4-trans = lc_56.
lwa_h4-matdat = lc_030.
lwa_h4-deltype = lc_004.
lwa_h4-contype = lc_003.
lwa_file = lwa_h3.
APPEND lwa_file TO li_file.
OPEN DATASET par_unix FOR OUTPUT IN LEGACY TEXT MODE
IGNORING CONVERSION ERRORS.
IF sy-subrc IS INITIAL.
LOOP AT li_file INTO lwa_file.
TRANSFER lwa_file TO par_unix.
ENDLOOP.
CLOSE DATASET par_unix.
ENDIF.
where par_unix is the file name entered on the selection screen.
Now where can i fit the two declarations of code which you have sent? Can you please explain.
Regards,
Asha -
Problem in csv file generation
Hi ,
I am trying to spool a query in csv format using "col sep ,"
but it is giving problem for the text values like example i have a sql_text column which gives the sql text. in the csv file which was generated the select statement columns are going to next column where the comma is invoked.
is there any way to format while generating csv file that entire sql_text should come in one column
Thanks
Rakeshset echo OFF pages 50000 lin 32767 feed off heading ON verify off newpage none trimspool on
define datef=&1
define datet=&2
set colsep ','
spool querries.csv
SELECT s.parsing_schema_name,
p.instance_number instance_number,
s.sql_id sql_id,
x.sql_text sql_text,
p.snap_id snap_id,
TO_CHAR (p.begin_interval_time,'mm/dd/yyyy hh24:mi') begin_interval_time,
TO_CHAR (p.end_interval_time,'mm/dd/yyyy hh24:mi') end_interval_time,
s.elapsed_time_delta / DECODE (s.executions_delta, 0, 1, s.executions_delta) / 1000000 elapsed_time_per_exec,
s.elapsed_time_delta / 1000000 elapsed_time,
s.executions_delta executions, s.buffer_gets_delta buffer_gets,
s.buffer_gets_delta / DECODE (s.executions_delta, 0, 1, s.executions_delta) buffer_gets_per_exec,
module module
FROM dba_hist_sqlstat s, dba_hist_snapshot p, dba_hist_sqltext x
WHERE p.snap_id = s.snap_id
AND p.dbid = s.dbid
AND p.instance_number = s.instance_number
AND p.begin_interval_time >
TO_TIMESTAMP ('&datef','yyyymmddhh24miss')
AND p.begin_interval_time <
TO_TIMESTAMP ('&datet','yyyymmddhh24miss')
AND s.dbid = x.dbid
AND s.sql_id = x.sql_id
ORDER BY instance_number, elapsed_time_per_exec DESC ;
SPOOL OFF;
exit; -
How do I avoid a/v sync problems in output files?
Hi.
I wanted to process a video and iMovie 09 doesn't support deinterlacing, so I deinterlaced the video in another program and generated an mjpeg avi (1920x1080), then a wav for the audio. When I import these two into iMovie 09 and paste the audio, everything works and previewing the video doesn't show any problems.
However, when I try to export this through quicktime, the audio gets a half second lag from the beginning which is never recovered through the video. This makes the video useless, as from the first 10 seconds you notice the performers' movements don't match the song (it's a live performance from a music group).
In the quicktime export options I select an MP4 container (no ISMA), H.264 codec, resolution 1920x1080HD, 29.97 fps (just as the source was), and automatic reference frame. The audio options are set to AAC-LC (music), because I can't select anything else.
Is there anything I can do to make this work? Why is it working correctly inside iMovie 09 only?What kind of video is your source?
Probably the answer is to use a better deinterlacing tool. There are two great tools that are free. (MPEG Streamclip and JES Deinterlacer). THere is no need to create a separate video file and audio file. Use one of these tools and convert to Apple Intermediate Codec. -
RFEBBECODA00 problem with output files
Hello
We are implementing Belgian payments. We make use of CODA 2.1, so RFEBBECODA00 should be the correct program. When running this program with a valid statement file the system doesn;t generatei the UMSATZ.TXT and AUSZUG.TXT on my given path. Everything seems ok, I get a correct list.
What can be wrong? Anything with Unix perhaps?
Regards
DT123We are working with SAP version 6.0
Edited by: M. Semmelink on Sep 30, 2010 1:43 PM -
Error in XML file generation :240416
Hi All,
I am facing problem with XML file generation.
Steps:
1. Source-->Query Transform and maintained Nested Stucture
2. Generated XML fomat from query transform
3. Created XML format file
4. Make XML format as target and given XML generate path
source table-->Query(nested structure)-->XML Format
when I validate the job no errors found.
Note: XSD file is in Local mechine and XML file will be generated in SFTP.
Prooblems:
1. Getting below error
The input XML refers to file which is not part of the definition of this XML Schema format. Check your schema and XML files,
and check that the root element in the XML file corresponds to the root element in the XML Schema
Validate your XML Schema using external schema validators (found at w3.org)
Thanks,
DeepaHi,
I think issue Because in your Query Transform output the Root element is Query and XML target is having some other root element. Make the Query trasform name similar to root element and try... -
Ld segmentation fault generating output file
I have a fairly large executable that is being compiled on Solaris 8 with gcc 3.2.3 configured with the Solaris 64 bit ld. ld is failing with a segmentation fault during the output file generation phase.
A stack track of ld at the time of the seg fault look like the following:
update_osym
update_outfile
ld_main
main
One of the registers referenced in the affending assembly instruction is suspiciously close
to 64K.
The .o's have been compiled with the -g option which generates quite a bit of debug information.
Has anyone seen this problem and is there any workaround other than not compiling with -g ?A few (sort of obvious) things to check:
1) Are you running the latest linker patch? It seems to be updated fairly often. For solaris 8, the current revision is 109147-26
2) Are you invoking ld directly, or letting gcc invoke it for you? In general it is much better to let the compiler binary drive ld. -
Problem with attaching file to Sales Order
Hello,
In my company we have the possibility to attach files to sales orders, e.g. pdf files with the printing details.
These files are added by the GUI user, this works fine.
Now we have an extra order creation stream in which a pdf file has to be added to the SO without user interaction.
I found a helpful link ( /people/rammanohar.tiwari/blog/2005/10/10/generic-object-services-gos--in-background )
This program creates URL links with no problem, but the file generation is not implemented yet.
I tried to add the file functions to his sample report but still have one problem. The file is uploaded, but not reported as a PDF file in sap. If I select the created attachment SAP allows only the saving of the attachment. After saving the created file is a good PDF file, it opens with PDF-viewers.
Why does SAP not know this is a PDF file and report it as such (and open the pdf viewer when selected).
Thanks, Frank.
source-code:
REPORT zzfb_brc .
* Report Z_RMTIWARI_ATTACH_DOC_TO_BO
* Written By : Ram Manohar Tiwari
* Function : We need to maintain links between Business Object and
* the attachment.Attachment document is basiclally a
* business object of type 'MESSAGE'.In order to maintain
* links, first the attachment will be crated as Business
* Object of type 'MESSAGE' using Message.Create method.
* Need to check if we can also use FM
* 'SO_DOC_INSERT_WITH_ORIG_API1' or SO_OBJECT_INSERT rather
* than using Message.Create method.
* I took this program and removed all the parts for adding URL's and
* notes.
* Include for BO macros
INCLUDE : <cntn01>.
* Load class.
CLASS cl_binary_relation DEFINITION LOAD.
CLASS cl_obl_object DEFINITION LOAD.
PARAMETERS:
* Object_a
p_botype LIKE obl_s_pbor-typeid DEFAULT 'BUS2032', "SO
p_bo_id LIKE obl_s_pbor-instid DEFAULT '0000757830', "example number
* Object_b
p_docty LIKE obl_s_pbor-typeid DEFAULT 'MESSAGE' NO-DISPLAY,
p_msgtyp LIKE sofm-doctp DEFAULT 'EXT' NO-DISPLAY,
* Relationship
p_reltyp LIKE mdoblrel-reltype DEFAULT 'ATTA'.
TYPES: BEGIN OF ty_message_key,
foltp TYPE so_fol_tp,
folyr TYPE so_fol_yr,
folno TYPE so_fol_no,
doctp TYPE so_doc_tp,
docyr TYPE so_doc_yr,
docno TYPE so_doc_no,
fortp TYPE so_for_tp,
foryr TYPE so_for_yr,
forno TYPE so_for_no,
END OF ty_message_key.
DATA : lv_message_key TYPE ty_message_key.
DATA : lo_message TYPE swc_object.
DATA : lt_doc_content TYPE STANDARD TABLE OF soli-line,
ls_doc_content TYPE soli-line.
* Create an initial instance of BO 'MESSAGE' - to call the
* instance-independent method 'Create'.
swc_create_object lo_message 'MESSAGE' lv_message_key.
* Upload the pdf file, for now from the frontend, in the future from
* the server.
DATA:
* dsn(40) TYPE C VALUE '/usr/sap/trans/convert/1.pdf', "server location
l_lines TYPE i. "filelenght
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'c:t1.pdf'
filetype = 'BIN'
IMPORTING
filelength = l_lines
TABLES
data_tab = lt_doc_content.
* no exceptions, the file is there in this example
break brouwersf.
** the coding for the server input, for later
*OPEN DATASET dsn FOR INPUT IN BINARY MODE.
*IF sy-subrc <> 0.
* EXIT.
*ENDIF.
*READ DATASET dsn INTO ls_doc_content.
*WHILE sy-subrc EQ 0.
* APPEND ls_doc_content TO lt_doc_content.
* READ DATASET dsn INTO ls_doc_content.
*ENDWHILE.
*CLEAR ls_doc_content.
*CLOSE DATASET dsn.
* define container to pass the parameter values to the method call
* in next step.
swc_container lt_message_container.
* Populate container with parameters for method
swc_set_element lt_message_container 'DOCUMENTTITLE' 'Title'.
swc_set_element lt_message_container 'DOCUMENTLANGU' 'E'.
swc_set_element lt_message_container 'NO_DIALOG' 'X'.
swc_set_element lt_message_container 'DOCUMENTNAME' p_docty.
swc_set_element lt_message_container 'DOCUMENTTYPE' p_msgtyp.
swc_set_element lt_message_container 'DocumentSize' l_lines.
swc_set_element lt_message_container 'DocumentContent' lt_doc_content.
swc_call_method lo_message 'CREATE' lt_message_container.
* Refresh to get the reference of create 'MESSAGE' object for attachment
swc_refresh_object lo_message.
* Get Key of new object
swc_get_object_key lo_message lv_message_key.
* Now we have attachment as a business object instance. We can now
* attach it to our main business object instance.
* Create main BO object_a
DATA: lo_is_object_a TYPE sibflporb.
lo_is_object_a-instid = p_bo_id.
lo_is_object_a-typeid = p_botype.
lo_is_object_a-catid = 'BO'.
* Create attachment BO object_b
DATA: lo_is_object_b TYPE sibflporb.
lo_is_object_b-instid = lv_message_key.
lo_is_object_b-typeid = p_docty.
lo_is_object_b-catid = 'BO'.
*TRY.
CALL METHOD cl_binary_relation=>create_link
EXPORTING
is_object_a = lo_is_object_a
is_object_b = lo_is_object_b
ip_reltype = p_reltyp.
* Check if everything OK...who cares!!
COMMIT WORK.Hi,
Welcome to the SDN Forums!!!
You need to supply the PC file extension in the container element 'DOCUMENTTYPE'.
swc_set_element lt_message_container 'DOCUMENTTYPE' p_msgtyp.
In your case change the above statement as below:
swc_set_element lt_message_container 'DOCUMENTTYPE' 'pdf'.
<b>OR</b> change the default value of p_msgtyp to 'PDF'.
Cheers,
Ramki Maley.
Please reward points if the answer is helpful.
For info on awarding points click on this link: https://www.sdn.sap.com/sdn/index.sdn?page=crp_help.htm
Message was edited by: Ramki Maley -
Exchange 2010 SP3, RU5 - Massive Transaction Log File Generation
Hey All,
I am trying to figure out why 1 of our databases is generating 30k Log Files a day! The other one is generating 20K log files a day. The database does not grow in size as the log files are generated, the problem is log file generation.
I've tried running through some of the various solutions out there, reviewed message tracking logs, rpc client access logs, IIS Logs - all of which show important info, but none of which actually provide the answers.
I Stopped the following services to see if that would affect the log file generation in any way, and it has not!
MS Exchange Transport
Mail Submission
IIS (Site Stopped in IIS)
Mailbox Assistants
Content Indexing Service
With the above services stopped, I still see dozens (or more) log files generated in under 10 minutes, I also checked mailbox size reports (top 10) and found that several users mailboxes were generating item count increases for one user of
about 300, size increases for one user of about 150Mb (over the whole day).
I am not sure what else to check here? Any ideas?
Thanks,
Robert
RobertHmm - this sounds like an device is chewing up the logs.
If you use log parser studio, are there any stand out devices in terms of the # of hits?
And for the ExMon was that logged over a period of time? The default 60 second window normally misses a lof of stuff. Just curious!
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Rhoerick,
Thanks for the response. When checking the logs the highest number of hits were the (Source) Load Balancers, Port 25 VIP. The problem i was experience was the following:
1) I kept expecting the log file generation to drop to an acceptable rate of 10~20 MB Per Minute (Max). We have a large environment and use the exchange sevrers as the mail relays for the hated Nagios monitoring environment
2) We didn't have our enterprise monitoring system watching SMTP traffic, this is being resolved.
3) I needed to look closer at the SMTP transport database counters, logs, log files and focus less on the database log generation, i did do some of that but not enough of that.
4) My troubleshooting kept getting thrown off due to the monitoring notifications seeming to be sent out in batches (or something similar) stopping the transport service for 10 ~ 15 minutes several times seemed to finally "stop the transactions logs
from growing at a psychotic rate".
5) I am re-running my data captures now that i have told the "Nagios Team" to quit killing the exchange servers, with their notifications, sometimes as much as 100+ of the same notifications for the same servers, issues. so far at a quick glance
the log file generation seems to have dropped by about 30%.
Question: What would be the best counters to review in order to "Put it all together"? Also note: our Server roles are split, MBX and CAS/HT.
Robert
Robert -
Regarding problem with new line feed for DME file generation
Hello Experts,
I m facing a problem in the DME file generation.
we want each record in the DME file should be in new line. for that we have add the new line feed character in the each row end. So in the SAP output it looks ok, But if we download that file the carriage return field is coming in the end of every row.
can any one tell how to solve this issue.
Please refer the below line code which i m using for new line
DATA: GM_newline TYPE c VALUE cl_abap_char_utilities=>CR_LF
You reply is valuable..
Thanks,
SureshDATA: GM_newline TYPE c VALUE cl_abap_char_utilities=>newline.
-
Hey guys,
I have this following problem:
When i export my movie to my desktop from premiere elements 11 it fails and says "Error of export: You are not permitted to create or delete the output file."
This is the first time i had this problem.
I have no ideas to solve this problem ... I don't found it on this page neither in the whole web -.-
I look forward to get requestsS
QuickTime is a requirement for Premiere Elements (any version). Please download and install it so that we can continue this troubleshooting. Among other things, without QuickTime installed, you will not have QuickTime presets in Publish+Share and will not have available to you codecs supplied by that player.
Please right click the Premiere Elements 11 desktop icon and apply Run As Administrator. Please review computer permissions..
In the meanwhile, please reply to all the questions, including
What is the description for your export choice and does it make a difference if your Export Save In location is the desktop or to Video Folder in Documents?
What is a description of your computer resources?
Please consider and supply details need to help us help you.
We want you to succeed.
Thank you.
ATR -
Problem with ghostscript ['Distiller' did not produce the output file ]
Hi,
We are trying to convert the checked in files to pdf using ghostscript.
The Steps i have followed in installing the Distiller
First I have installed gs8.64 and configure distiller
Refinery server--> Conversion settings --> Third-party Application Settings --> Distiller Engine --> options -->
Use GhostScript and provided the path to install dierctory as C:/Program Files/gs/gs8.64/
Installed Printer as per the pdf
Conversion Settings --> Primary web redention --> convert to pdf using third party applications
Server details:
CS: 10gr3
ghost script 8.64
Plz find the below logs details
Error Log...
Copying c:/ucm/server2/vault/~convert/idc/2/2.txt to c:/ucm/server2/vault/~convert/idc/2/temp.ps
Waiting for exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps
Obtained exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps
Waiting on Distiller
Check for file c:/ucm/server2/vault/~convert/idc/2/temp.pdf failed
'Distiller' did not produce the output file 'c:/ucm/server2/vault/~convert/idc/2/temp.pdf'.
Exception type is 'java.lang.Throwable'. Details
An error has occurred. The stack trace below shows more information.
!$Copying c:/ucm/server2/vault/~convert/idc/2/2.txt to c:/ucm/server2/vault/~convert/idc/2/temp.ps <br>Waiting for exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps <br>Obtained exclusive access on c:/ucm/server2/vault/~convert/idc/2/temp.ps <br>Waiting on Distiller <br>Check for file c:/ucm/server2/vault/~convert/idc/2/temp.pdf failed <br>'Distiller' did not produce the output file 'c:/ucm/server2/vault/~convert/idc/2/temp.pdf'. <br>!syExceptionType,java.lang.Throwable
java.lang.Throwable
at intradoc.common.IdcLogWriter.doMessageAppend(Unknown Source)
at intradoc.common.Log.addMessage(Unknown Source)
at intradoc.common.Log.errorEx2(Unknown Source)
at intradoc.common.Log.errorEx(Unknown Source)
at docrefinery.agent.Logger.logError(Logger.java:138)
at docrefinery.convert.StepHandler.executeStepByName(StepHandler.java:140)
at docrefinery.convert.ConversionDriver.processSteps(ConversionDriver.java:231)
at docrefinery.convert.ConversionDriver.convertDocument(ConversionDriver.java:144)
at docrefinery.convert.ConversionDriver.processSubConversion(ConversionDriver.java:165)
at docrefinery.convert.StepHandler.executeStepByName(StepHandler.java:109)
at docrefinery.convert.ConversionDriver.processSteps(ConversionDriver.java:231)
at docrefinery.convert.ConversionDriver.convertDocument(ConversionDriver.java:144)
at docrefinery.queue.PreConvertedRefineryQueueMonitor.handleCurrentQueueItem(PreConvertedRefineryQueueMonitor.java:204)
at docrefinery.queue.PreConvertedRefineryQueueMonitor.monitorRefineryPreConverterQueue(PreConvertedRefineryQueueMonitor.java:125)
at docrefinery.queue.PreConvertedRefineryQueueMonitor$1.run(PreConvertedRefineryQueueMonitor.java:93)
at java.lang.Thread.run(Thread.java:595)
Conversion completed -- Step PostscriptToPDF forced conversion failure by conversion engine because of error: ''Distiller' did not produce the output file 'c:/ucm/server2/vault/~convert/idc/8/temp.pdf'.'. Exception type is 'java.lang.Throwable'.
Please suggest me where i am going wrong...
Thanks in advance,
Prasad V.Hi Srinath,
Thanks for your reply. It worked fine with 8.63 version.
Is there any other way to get it worked with out installing ghostscript.exe as the client doesnt want to instal any exe file on the server as it has broader impact on other instances also, can we acheive the conversion by copying the extracted zip files of ghostscript-8.63.tar.gz .....
We tried with extracted zip files by following the below settings
Refinery server--> Conversion settings --> Third-party Application Settings --> Distiller Engine --> options -->
deselected Use GhostScript and provided the Path to generic PostScript to PDF engine D:\ghostscript\ghostscript\lib\ps2pdf14.bat
Parameters to pass to generic PostScript to PDF engine.
<$postscriptFile$> <$pdfFile$>
Path to generic PDF optimization engine.
D:\ghostscript\ghostscript\lib\pdfopt.bat
Parameters to pass to generic PDF optimization engine.
<$pdfFile$> <$optimizedPdfFile$>
Installed Printer as per the pdf
Conversion Settings --> Primary web redention --> convert to pdf using third party applications
We are getting the below error:
Waiting for exclusive access on c:/temp/idcoutput.ps
Obtained exclusive access on c:/temp/idcoutput.ps
Waiting on Distiller
Error Distilling
Exception type is 'java.lang.Throwable'. [ Details ]
An error has occurred. The stack trace below shows more information.
!$Waiting for exclusive access on c:/temp/idcoutput.ps <br>Obtained exclusive access on c:/temp/idcoutput.ps <br>Waiting on Distiller <br>Error Distilling <br>!syExceptionType,java.lang.Throwable
java.lang.Throwable
at intradoc.common.IdcLogWriter.doMessageAppend(Unknown Source)
at intradoc.common.Log.addMessage(Unknown Source)
at intradoc.common.Log.errorEx2(Unknown Source)
at intradoc.common.Log.errorEx(Unknown Source)
at docrefinery.agent.Logger.logError(Logger.java:138)
at docrefinery.convert.StepHandler.executeStepByName(StepHandler.java:140)
at docrefinery.convert.ConversionDriver.processSteps(ConversionDriver.java:231)
at docrefinery.convert.ConversionDriver.convertDocument(ConversionDriver.java:144)
at docrefinery.queue.PreConvertedRefineryQueueMonitor.handleCurrentQueueItem(PreConvertedRefineryQueueMonitor.java:204)
at docrefinery.queue.PreConvertedRefineryQueueMonitor.monitorRefineryPreConverterQueue(PreConvertedRefineryQueueMonitor.java:125)
at docrefinery.queue.PreConvertedRefineryQueueMonitor$1.run(PreConvertedRefineryQueueMonitor.java:93)
at java.lang.Thread.run(Thread.java:595)
Conversion completed -- Step PostscriptToPDF forced conversion failure by conversion engine because of error: 'Error Distilling'. Exception type is 'java.lang.Throwable'.
Plz let us know if it is possible to convert the docs to pdf with out installing the ghostscript.exe file on server.
Thanks in advance,
Prasad V.
Maybe you are looking for
-
Hi, My friend has just updated there 3GS to IOS6 and once it's done, 2 screens appear. first one says, Update complete, there are just a few more steps to take. Press continue and another screen comes up with the itunes symbol and the cable and says
-
Validation should be included on the billing address not the u0093sold to addre
Hi folks, how can we do the validation based on the billing adress(bill to party). as of now we are doing validation based on sold to party. in my customer master i have only 3 options in account group field (Tcode:xd01)-customer-trading,customer -no
-
How can I install Tiger upgrade on Power Mac G5?
I have PowerMac G5 with OSX 3.9. I bought retail disk of Tiger but it will not install as upgrade. It goes past the restart process but stops shortly after installation begins with message telling me that installation failed. I originally bought Leop
-
How to install software from download
I'm new to the mac world. I'm using move2mac to move files over from pc. I downloaded and installed the software to my pc, but when I download the software for mac the install comes out in a weird format. (pkg.html)?
-
Cant hear out of Speakerphone or earpiece
Ok I have a problem with my 8100, when I make a call, or answer a call, I cant hear them, and they cant hear me. Usually you have the option to use speakerphone, but when I click the trackball it only has Hold and Mute, then Full Menu. When I goto my