Problem in PA30 Maintain Text

Hi All,
We have recently encountered a problem with maintaining text via PA30. I have searched for solutions for this and the answer i got is to remove the concern infotype from the grouping table V_T582G. This eventually worked. Problem solved, we can now maintain text for concern infortypes.
However, when maintaining infotypes via ESS, there seems to be a problem. Pointing that the infotype is not maintained in V_T582G.
Can anyone please advice us on how to go about this problem? Any suggestion would be greatly appreaciated.
Regards,
Ranilo

Hi Ranilo,
If you maintain ths infotype via ESS then you will need an entry in T582G as ESS use the new infotype framework.
In the past there was a technical restriction which prevents to maintaint text for shared infotypes (ITs with an entry in T582G).
This restrictions has been removed recently via note 1468564 T582A: Cannot activate text maintenance for infotype.
Implement this note, it will allow you to have the text maintenance allowed on shared infotypes.
Hope this help
Sarah

Similar Messages

Unable to view the message in PA30 maintain text in workflow

Hi All,
We have developed a workflow which gets triggered when ever a record gets created in PA30 infotype 0267.
At the time of record creation the user can maintain his comments in Goto=> Maintain text.
After the record gets created the workflow gets trigerred,
the record gets locked and a workitem appears in the users
inbox.
The user doubles clicks on the workitem and a decision screen appears. Using the objects and Attachments the user can vie the record and also the icon for maintain text.
my problem is that after the record gets locked I am not able to view the text maintained in the maintain text editor,
whereas after that record gets unlocked I am able to view the text.
Are there any settings via which we can view the text irrespective whether it is created at the time record is locked or not.
Thanks and Regards
Shraddha

Hi,
By looking at the word 'Maintain text', it looks to me that it doensn't make sense to have this option up when that particluar record is locked. Or there should be an option saying 'Display Text'.
Anyway, what is the purpose of the comments written by the creator of the record? is it only to facilitate the next approver to take his decision or Do you need this comment always attached with record for some proof?
If comment is only to facilitate the next approver to take his decison and not really required to be attached along with record, then may be you can do the following
1. Once the record gets created, the first workitem send it to creator only. In the description mention to add comment and click to continue to go for approval. So, when work item comes to creator he can add the comment using 'Create' option with workitem and this comment will be there as an attachment through out the workflow. So approver will also be able to see the comment.
2. If at all it is required to store these comments along with record, once the whole approval process gets over, in the last step write a method to extract the attachments from workflow container and assign aginst the record. We have FM's to extract attachments ( SAP_WAPI_GET_ATTACHMENTS) and also FMs to store against an object (ARCHIV_CREATE_TABLE,ARCHIV_CREATE_FILE).
Hope this helps you !!
Regards
Krishna Mohan

Maintain Text in Infotype 0041 via LSMW

Hi,
Has anyone had success loading text into Infotype 0041 via lsmw?
I am trying to create an lsmw to maintain text in infotpye 0041. I follow the route PA30, then when in IT0041 I go to edit and maintain text.
The problem is that I get a syntax error because the field I am trying to update is RSTXP-TDLINE which is a length 0 and format type string. LSMW won't accept string fields so in the generated program for the lsmw the line reads: "tdline_01(000000) type c,". This obviously doesn't pass the syntax check.
Any help greatly appreciated.
Regards,
Warren.

Hi
I just tried to create a LSMW in my DEV environment. I didnt get any error when recording. I entered the text in IT41 without any issue. What I am getting in the source code is:
RSTXP-TDLINE(01) Abcde TDLINE_01 ABAP Source Line
Am I missing what you are seeing?
Cheers
Pramod

Maintain texts for Infotype 0019 via ABAP.

Hi,
The issue is related to maintaining texts for Infotype 0019. I have a program below. The main problem is I am facing is for some records it inserts text in Infotype (0019) but for some it does not. Can anyone suggest why so or a way to resolve this problem ???
REPORT ytbctest009.
TABLES: pernr, pcl1.
INFOTYPES: 0019.
DATA: key LIKE pskey.
DATA: BEGIN OF ptext OCCURS 200.
DATA:   line(72).
DATA: END OF ptext.
SELECTION-SCREEN BEGIN OF BLOCK abc WITH FRAME TITLE text-001.
PARAMETERS:               p_pernr LIKE pernr-pernr.
SELECTION-SCREEN END OF BLOCK abc.
ptext-line = 'TEST 1'.
APPEND ptext.
ptext-line = 'Test 2'.
APPEND ptext.
ptext-line = 'Test 3'.
APPEND ptext.
rp-read-infotype p_pernr 0019 0019 '18000101' '99991231'.
SORT p0019 DESCENDING.
READ TABLE p0019 INDEX 1.
p0019-itxex = 'X'.
MOVE-CORRESPONDING p0019 TO key .
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    infty         = '0019'
    number        = p_pernr
    validityend   = p0019-endda
    validitybegin = p0019-begda
    record        = p0019
    operation     = 'MOD'.
EXPORT ptext TO DATABASE pcl1(tx) ID key.
Thanks in advance.

Hi Rajashree,
I hope , below code will solve the problem.
<b>Main Code</b>
FUNCTION zhr_mustus_update_it0019.
*"*"Local interface:
*" IMPORTING
*"     VALUE(IM_PERNR) TYPE P0019-PERNR OPTIONAL
*"     VALUE(IM_USRID) TYPE PA0105-USRID OPTIONAL
*"     VALUE(IM_SUBTY) TYPE P0019-SUBTY
*"     VALUE(IM_TERMN) TYPE P0019-TERMN OPTIONAL
*"     VALUE(IM_MNDAT) TYPE P0019-MNDAT OPTIONAL
*"     VALUE(IM_BVMRK) TYPE P0019-BVMRK OPTIONAL
*"     VALUE(IM_TEXT) TYPE CHAR30 OPTIONAL
*" EXPORTING
*"     VALUE(EX_RETURN_MESSAGE) TYPE STRING
*"     VALUE(EX_MESSAGE_ID) TYPE ARBGB
*"     VALUE(EX_MESSAGE_NUMBER) TYPE MSGNR
*" EXCEPTIONS
*"      SYSTEM_FAILURE
*"      COMMUNICATION_FAILURE
REFRESH bdcdata.
REFRESH it_bdc_message.
* Validations
PERFORM validations USING im_usrid im_subty im_mndat
                   CHANGING im_pernr
                            g_task_date
                            g_rem_date.
* Return message
MOVE:
    g_message TO ex_return_message,
    'ZMSGHR' TO ex_message_id,
    g_msgno   TO ex_message_number.
* If there any error don't process
CHECK ex_return_message IS INITIAL.
* If reminder date is missing then its creation
IF im_mndat IS INITIAL.
* Fill BDC for PA30 Creation
    PERFORM fill_bdc_for_creation USING im_pernr
                                        im_subty
                                        im_text
                                        g_task_date
                                        g_rem_date.
ELSE.
* Its a change, Fill BDC for PA30 change
    PERFORM fill_bdc_for_change USING im_pernr
                                      im_subty
                                      im_termn
                                      im_bvmrk
                                      im_text.
ENDIF.
* Call transaction PA30
PERFORM bdc_call_transaction.
* Return message
MOVE:
    g_message TO ex_return_message,
    g_msgid   TO ex_message_id,
    g_msgno   TO ex_message_number.
ENDFUNCTION.
<b>All Above Subroutines,</b>
*& Form Validations
* Validations for MUS/TUS
*      -->U_USRID      User id for TUS
*      -->U_SUBTY      Subtype 10 - MUS, 11 - TUS
*      -->U_MNDAT      Reminder date
*      <--PERNR        Person for MUS
*      <--U_TASK_DATE Task date
*      <--U_REM_DATE   Reminder date
FORM validations USING u_usrid     LIKE pa0105-usrid
                       u_subty     LIKE p0019-subty
                       u_mndat     LIKE p0019-mndat
              CHANGING u_pernr     LIKE p0019-pernr
                       u_task_date LIKE sy-datum
                       u_rem_date LIKE sy-datum.
DATA:
    BEGIN OF it_tmp_0019 OCCURS 0,
     termn LIKE pa0019-termn,
    END OF it_tmp_0019.
CLEAR g_message.
* Validations for MUS
IF u_subty EQ c_subty_10.
    MOVE sy-datum TO u_task_date.
    IF u_pernr IS INITIAL.
* Person number is missing
      MOVE:
        text-001 TO g_message,
        '003' TO g_msgno.
    ELSEIF u_mndat IS INITIAL.
* Its creation, check if there is already a open item
      SELECT pernr
        FROM pa0019
        INTO u_pernr
       WHERE pernr EQ u_pernr
         AND subty EQ u_subty
         AND bvmrk NE '2'.
        EXIT.
      ENDSELECT.
      IF sy-subrc EQ 0.
* Throw an error if there is already a open item
        MOVE:
          text-006 TO g_message,
          '004'    TO g_msgno.
      ENDIF.
    ENDIF.
ENDIF.
* Validations for TUS
IF u_subty EQ c_subty_11.
    IF u_usrid IS INITIAL
   AND u_pernr IS INITIAL.
* User/Person number is missing
      MOVE:
        text-002 TO g_message,
        '005'    TO g_msgno.
    ELSEIF NOT u_usrid IS INITIAL.
      SELECT pernr
        FROM pa0105
        INTO u_pernr
       WHERE usrid EQ u_usrid.
      ENDSELECT.
      IF u_pernr IS INITIAL.
* Person number is missing
        MOVE:
          text-001 TO g_message,
          '006' TO g_msgno.
      ENDIF.
    ENDIF.
    IF g_message IS INITIAL.
      SELECT termn
        FROM pa0019
        INTO TABLE it_tmp_0019
       WHERE pernr EQ u_pernr
         AND subty EQ u_subty
         AND bvmrk NE '2'.
      READ TABLE it_tmp_0019 WITH KEY termn = sy-datum.
* There is no open task for today
      IF sy-subrc NE 0.
        MOVE sy-datum TO u_task_date.
      ELSE.
* There is a open task for today, new task should be created next
* available date and reminder date is yesterday's date
        SORT it_tmp_0019 DESCENDING.
        READ TABLE it_tmp_0019 INDEX 1.
        u_task_date = it_tmp_0019-termn + 1.
        u_rem_date = sy-datum - 1.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    "VALIDATIONS
*& Form Fill_bdc_for_creation
* BDC data for creation , Transaction PA30
*      -->U_PERNR      Person
*      -->U_SUBTY      Subty MUS - 10, TUS - 11
*      -->U_TEXT       Text
*      -->U_TASK_DATE Task date
*      -->U_REM_DATE Task date
FORM fill_bdc_for_creation USING u_pernr LIKE p0019-pernr
                                 u_subty LIKE p0019-subty
                                 u_text TYPE char30
                                 u_task_date LIKE sy-datum
                                 u_rem_date LIKE sy-datum.
* Scree1
DATA:
    l_task_date(10),
    l_rem_date(10).
* Use system date as Task date
WRITE:
    u_task_date TO l_task_date,
    u_rem_date TO l_rem_date.
PERFORM bdc_dynpro      USING 'SAPMP50A' '1000'.
PERFORM bdc_field       USING 'RP50G-PERNR'
                                u_pernr.
PERFORM bdc_field       USING 'RP50G-CHOIC'
                                '0019'.
PERFORM bdc_field       USING 'RP50G-SUBTY'
                                u_subty.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=INS'.
* Screen2
PERFORM bdc_dynpro      USING 'MP001900' '2000'.
PERFORM bdc_field       USING 'P0019-TMART'
                                u_subty.
PERFORM bdc_field       USING 'P0019-TERMN'
                                 l_task_date.
IF NOT u_rem_date IS INITIAL.
    PERFORM bdc_field       USING 'P0019-MNDAT'
                                   l_rem_date.
ENDIF.
PERFORM bdc_field       USING 'RP50M-TEXT1'
                                u_text.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/00'.
PERFORM bdc_dynpro      USING 'MP001900' '2000'.
PERFORM bdc_field       USING 'P0019-TMART'
                                u_subty.
PERFORM bdc_field       USING 'P0019-TERMN'
                                 l_task_date.
IF NOT u_rem_date IS INITIAL.
    PERFORM bdc_field       USING 'P0019-MNDAT'
                                   l_rem_date.
ENDIF.
PERFORM bdc_field       USING 'RP50M-TEXT1'
                                u_text.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=UPD'.
ENDFORM.                    "fill_bdc_for_creation
*& Form fill_bdc_for_change
* BDC data for change , Transaction PA30
*      -->U_PERNR    Person
*      -->U_SUBTY    subtype MUS - 10 , TUS - 11
*      -->U_MNDAT    Reminder date
*      -->U_BVMRK    Status
*      -->U_TEXT     Text
FORM fill_bdc_for_change USING   u_pernr LIKE p0019-pernr
                                 u_subty LIKE p0019-subty
                                 u_termn LIKE p0019-termn
                                 u_bvmrk LIKE p0019-bvmrk
                                 u_text TYPE char30.
* Scree1
DATA l_termn_date(10).
WRITE u_termn TO l_termn_date.
PERFORM bdc_dynpro      USING 'SAPMP50A' '1000'.
PERFORM bdc_field       USING 'RP50G-PERNR'
                                u_pernr.
PERFORM bdc_field       USING 'RP50G-CHOIC'
                                '0019'.
PERFORM bdc_field       USING 'RP50G-SUBTY'
                                u_subty.
PERFORM bdc_field       USING 'RP50G-BEGDA'
                                l_termn_date.
PERFORM bdc_field       USING 'RP50G-ENDDA'
                                l_termn_date.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=MOD'.
* Screen2
PERFORM bdc_dynpro      USING 'MP001900' '2000'.
PERFORM bdc_field       USING 'P0019-TMART'
                                u_subty.
PERFORM bdc_field       USING 'P0019-TERMN'
                                 l_termn_date.
PERFORM bdc_field       USING 'RP50M-TEXT1'
                                u_text.
PERFORM bdc_field       USING 'P0019-BVMRK'
                                u_bvmrk.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=UPD'.
ENDFORM.                    "fill_bdc_for_change
FORM bdc_call_transaction.
DATA:
    l_mode(1) TYPE c VALUE 'N',
    l_lines   TYPE i,
    l_msgvar1 LIKE balm-msgv1,
    l_msgvar2 LIKE balm-msgv2,
    l_msgvar3 LIKE balm-msgv3,
    l_msgvar4 LIKE balm-msgv4.
CALL TRANSACTION 'PA30' USING bdcdata MODE l_mode
                           MESSAGES INTO it_bdc_message.
* Get last message
DESCRIBE TABLE it_bdc_message LINES l_lines.
READ TABLE it_bdc_message INDEX l_lines.
MOVE:
    it_bdc_message-msgid TO g_msgid,
    it_bdc_message-msgnr TO g_msgno,
    it_bdc_message-msgv1 TO l_msgvar1,
    it_bdc_message-msgv2 TO l_msgvar2,
    it_bdc_message-msgv3 TO l_msgvar3,
    it_bdc_message-msgv4 TO l_msgvar4.
* Prepare message
CALL FUNCTION 'MESSAGE_PREPARE'
    EXPORTING
      language               = sy-langu
      msg_id                 = g_msgid
      msg_no                 = g_msgno
      msg_var1               = l_msgvar1
      msg_var2               = l_msgvar2
      msg_var3               = l_msgvar3
      msg_var4               = l_msgvar4
    IMPORTING
      msg_text               = g_message
    EXCEPTIONS
      function_not_completed = 1
      message_not_found      = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
    MOVE text-005 TO g_message.
ENDIF.
ENDFORM.                    "BDC_FIELD
*        Start new screen                                              *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.                    "BDC_DYNPRO
*        Insert field                                                  *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM.                    "BDC_FIELD
Cheers.
Santosh.

How to maintain TEXT ID GROUP (table TTXERN)

Dear SAP,
I am having a problem on how to maintain TEXT ID GROUP (table TTXERN). Where is it configured and why after upgraded to ECC6, this table doesn't cover all data availbale in table TTXER?
Your expert advice is realy much appreciated. will give points for those who help me out this problem.
TQ
Regards,
Nazrul

You need to run the program SDTXT1AID, it will list all entries present in TTXER but missing in TTXERN.
It is very common to come across this issue during SAP upgrade.
You can refer to the std documentation of the program &/or Google it to find further details

Maintain Text PA - Authorization issue?

Hi experts,
I'm having a problem when updating text in infotypes using "Maintain Text" (F9). Most user's SAP GUI block when trying t access the text window (after clicking Maintain text). SAP GUI just freeze (no message). It's the only time I have got an error like this.
Since some users are able to maintain text, do you think it could be an authorization issue?
Could you please show me which authorization object should be customized to let them to maintain text?
If you think is not an authorization issue, any idea?
I would really appreciate your help since I run out of ideas...
Thank you very much
Chema

Hi Dilek,
thank you for your help. SU53 shows a problem with authorizations for P_ORGXX (R, ,,,,) for people who can't maintain text, but it also show a problem with P_ORGINCON (R,,,,,,,) for people who can.
I know these two authorization object are related to infotype read/writing, but it is also related to maintain text feature?
MS Word comment seems a posible explanation, because since SAP GUI blocks should be any local configuration issue, but still all computers has the same version and instalation.
Thank you again for your help
Cheers,
Chema

"Maintain Text" (press F9) in LSMW

How to handle "Maintain Text" (press F9) in LSMW. The problem is when converting String to Character. Anyone have experience for this?
rgds,
Handoko

Hi
I just tried to create a LSMW in my DEV environment. I didnt get any error when recording. I entered the text in IT41 without any issue. What I am getting in the source code is:
RSTXP-TDLINE(01) Abcde TDLINE_01 ABAP Source Line
Am I missing what you are seeing?
Cheers
Pramod

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Problem in displaying Arabic text in flash cs3/cs4

Hi All, I'm creating one website. I have to display dynamic xmlize arabic text in flash. I have done it using flash cs3/AS3. But problem is that when text displays in flash it is not rendering as expected. Some gaps comes in the characters. But when I open my xml in browser, arabic text displays correct.
Is there any way to do it in flash cs3 or Flash cs4 using player 9? It would be really great if anyone can give me solution on this. Thanks
Chandrakant

You have to do it yourself - I don't have a ready solution. Just look into documentation how StyleSheets are used and see what properties work best for you:
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/TextField.html
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/StyleSheet.html
Also, with embedded fonts you need to play with TextFormat settings and AntiAliasType
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/AntiAliasType.html
In addition, on my machine even if I don't emebed fonts - Arabic works in Arial, TImes and others.

Problem in Saving long texts from IC Webclient

Hi,
I have a little problem with BP long text transfert.
In IC Webclient, I identify a account and I create a long text (for exemple a Accounting Note).
I can find this text in CRM (t-code BP->long text) but, it is not transfert to ECC (XD03->Extra->text).
If I create a accounting note directly in CRM, it is transfert to ECC !!
The transaction PITX is customized in ECC.
I work with CRM5.0 and ECC6.
What I missed ?
Gaétan

Hi Gaétan,
Maybe the BDOC BUPA_MAIN responsible to export the change to ECC is not being created when you make the change in IC Webclient.
Can you confirm it in SMW01? Try to make a change in a partner long text in IC webclient, and check if the bdoc was sent to R3.
Then try it in BP t-code, and check it again.
If this is the problem, maybe you should contact OSS suport.
Kind regards,
Garcia

Problem in transporting the text elements for user exit EXIT_SAPLV09A_002

Hi All,
I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
Regards,
Sachin
Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PM

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

Problem in displaying total text in total line

Hi...I am facing problem in displaying total text in first column of total line. Width of first column is sufficient to display text "TOTAL". But somehow its not getting displayed....Please Help...?
code is as follows:
ls_layout TYPE slis_layout_alv .
ls_layout-totals_text       = 'TOTAL'.
ls_layout-colwidth_optimize = 'X'.
ls_layout-no_vline          = 'X'.
ls_layout-no_hline          = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program     = gv_repid            " Report ID
      i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = ls_layout
      it_fieldcat            = gt_fieldcat         " Field Catlog
    TABLES
      t_outtab               = gt_cost_output      " Output Table

hi me to i have the same problem
   FORM create_layout .
data: text(20) TYPE c.
it_layout-window_titlebar   = text.
it_layout-colwidth_optimize = 'X'.
it_layout-totals_text       = text-013."'Totals'(013).
it_layout-cell_merge        = 'X'.
it_layout-zebra             = 'X'.
ENDFORM.
but no output total in alv
also i had another broplem i had unit i wanna show it in total line and calc value in header

Problems with the Widget "Text Ticker"

Hello, I have a problem with the widget "Text ticker". I tried to put more then one text ticker on my site, but it doesn't work, when I look in Muse it looks like this:
and when I look in the preview only the first text ticker works...maybe it is not possible to have more then one text ticker on one site?
Thank you.

It seems you are using the same name for all the ticker instances on page.
You need to have unique names for each of the ticker you want on a single page. Tickers with duplicate names will not work.
Cheers,
Vikas

Problem in downloading long text

Hi Experts,
I am facing problem while downloading long text.
previously it was working 5ne. now it is giving the error meaasge
ID ST Language En not found
is there any settings to do.
Thanks & Regards
Sangareddy

In a SAPscript you do not need to use ABAP code to retrieve long text - Just use the INCLUDE command in SAPSCRIPT - see help for details
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p]
this puts the complete long text in and formats it for the window
Long text problem in sap script
Reward points..

Problem with PA30 event LIS1

Hi all,
I have a problem with PA30, I have three kind of subtyes, AS, CO, DI for a Z infotype, but I have a requirement, when I push the mountain(LIS1) list style for all subtypes, don't see the AS type, because the user does`'t need and is confused for him, but he need to see the 'AS' when he puts the subtype in the field of pa30, because he needs to create and delete it in some case, just when he push the LIS1 don't see it,
so the question is, is any way to do this ? I've been seeing by user exit and badis but the P9105 is a structure, so i can't get al the table to delete teh 'AS' or maybe have another name, or some place where it fill the table that display.
Some suggestions??
Please let me know.
Thanks a lot.

Explore dynpro 3000 of your Z infotype (MPnnnn00 report in se80)

Problem in PA30 Maintain Text

Similar Messages

Maybe you are looking for