Problem in PO Closing

Closing of the Purchase Orders
The change is to be made for the field  ELIKZ Delivery completed indicator. All the open purchase orders are to be closed.
But the material group of the materials has been changed so the system is issuing the message  Material group the material has been changed. And system is not allowing closing the purchase orders.

Hi,
Check the following data with respect to material master.
When changing the material group of a material that is already being used by the purchasing department, you should note that:
The purchasing statistics show how much of a material group has already been ordered. Unitl the change is made, the material is managed under the old material group and therefore the old material group statistics are updated. From the moment the change is made, the new material group's statistics are updated.
Some purchase orders may derive from contracts with item categories referring to material groups. If this is the case, the material cannot be used after the change has been made.
Every purchase requisition is allocated to a release strategy that can depend on the material group. A new release strategy may apply to a new material group. Purchase requisitions that were created before the change are subject to the old strategy; purchase requisitions that were created after the change are subject to the new strategy.
Regards
Ravi shankar.

Similar Messages

  • Xcelsius displays Problem accessing excel: closing message

    Hi expert,
    I installed Xcelsius 2008 Engage. After that I tried to execute the program. A "Problem accessing excel: closing" message is displayed and after looking similar issues in SDN, and SAP notes... I tried following actions, as suggested::
    Restart computer
    To check that no MS Offices processes are being executed
    No outlook is running
    I uninstalled some Office 2007 extra packages
    I installed Xcelsius SP1 Fix packs 1, 2 and 3.
    After fix packs installation, the error message is still appearing, but now a new message also appears: "Failed to set localized string".
    Does anyone have an idea about what I have to do to solve this annoying problem? I can not use Xcelsius!
    There is one thing I have to check: that Excel doesn't have installed add-ins. Does anyone know if SAP Business Explorer tools, in special Excel Analyzer, can be considered as an Excel add-in? can this SAP product interfere in Xcelsius excecution, causing the message I get?
    Thank you very much!

    Bobby,
    I have none of your mentioned software, except .xla files.
    These are .xla files, from SAP GUI I have installed and from SAP Business Explorer. Can theses .xla files interfere in Xcelsius? Should I uninstall this software which is by now my Daily working tools?
    BExAnalyzer.xla
    CRMSalesPlanning.xla
    EXPTOOWS.XLA
    HTML.XLAM
    MAPDataLayer.xla
    MAPDialogLayer.xla
    sapbex.xla
    sapbex0.xla
    sapbexc.xla
    sapbexc350.xla
    sapbexc700.xla
    sapbexp.xla
    sapbexs.xla
    sap_rpw.xla
    SEM_Installation_Check.xla
    I will also try to install this Xcelsius in a Virtual Machine...
    Thank you very much

  • My hp deskjet 2050 hasa a problem output tray closed

    my hp deskjet 2050 has a problem output tray closed modl no J510a i try everthing 

    Hi there,
    Try downloading and running the Hardware diagnostic utility located here. It can resolve a lot on its own. If not it will give us a better idea of what is going on. Let us know the results.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Problem running in closed-lid (clamshell) mode?

    New 2.4 glassbook, upgraded to 4Gb Crucial ram, using bluetooth mouse and keyboard, with external Dell 2007FP monitor.
    With my old MBP in sleep mode, I could connect the monitor, ethernet, and power, and when I plugged in usb with the lid still closed, the laptop would turn on and everything worked in lid-closed mode.
    Now with new glassbook, do the same thing (using display port to DVI adapter), the machine whirrs up, the display turns on (without top menu), and then the laptop goes to sleep. Tried it on a different monitor, same problem.
    Am I the only one with this problem of the glassbook not wanting to operate in lid-closed mode?
    Thanks in advance.

    Yes, same problem. Swapped memory chips back to Apple, same problem. Reset SMU and zapped pram, same problem. It's gonna suck if I have to exchange the laptop because I've spent a day migrating over. I'm hoping it's just a defective DP-DVI adapter. I've also noticed external display flashing (losing signal) as detailed in this thread: http://discussions.apple.com/thread.jspa?threadID=1756755&tstart=0 This makes me worry it's not just the adapter but a problem (driver or hardware) with the 9400M. Can someone else confirm they can operate in clamshell mode without problems?

  • Problem with lid closed mode

    So as far as i know, to get the computer to run in lid closed mode you press f7 until you get video mirroring, the second mode i believe, close the display, then wake the computer with the external mouse or keyboard. I've done this, but almost as soon as i wake the computer, it goes back to sleep again.
    How do i fix this??
    Is it a problem for I'm using a windows keyboard, but i wouldn't think that could be it.

    Also, if you haven't already done this, make sure that Bluetooth is enabled and that you "Allow Bluetooth devices to wake this computer" (Systpref/Bluetooth/Settings)

  • Help with systemd problems/reply to closed thread

    @Everyone; as the previopus topic was closed, I am opening a new one here, partly to reply to some things that was said to me in the previous thread/topic (and I do not like to leave people hanging), but mainly to try and get some help with my systemd config (that I was not able to find help with in the wiki or manpages).
    @czubek; eww, that sounds rather similiar to some other operating systems I've heard of (not just, but obviously including, windows)... For me, subjectively, that is not very attractive, as being able to have a single application do a single thing, and then mixing and matching as I personally see fit is a great thing.
    @tomegun: I can indeed see your point, but if I made direct quotes on all the things I reply too, my posts would reach biblical proportions.
    Mmm-hmm, I do indeed know of "the Arch Way"; however, the system that you expose can be of varying complexity as well, and I found that the system that was presented to me by way of Sysvinit/initscripts was a way simpler system than that presented to me by systemd.
    Indeed, and I do like that; I enjoy knowing how my system works and learning more about it; however, the truth is that reading manpages and the wiki isn't always enough. And I use the numbers instead of letters in certain places as a jest, please, do not get offended by that; if you have to, get offended by my opinions.
    Ah, I have now scanned the wiki, the manpages, and have already faced problems. While part of me is saddened by this fact (as I was hoping for a smooth transition to systemd), part of me is glad that I can at least prove that everything isn't quite as simple as some people would make it out to be. More on this later in this post, as I do need help with the problems I have faced.
    And I wouldn't say that the new and old way are equally trivial, as I immediatley faced problems with "the new way". More on this later.
    Ok, I find that if the debate is polarized, then there is nothing wrong with describing it as such. I spell what I see.
    Oh my... Ignored as a matter of principle? I would say that that is an excellent way to stagnate; by that logic, moviemakers, gamemakers etcetera should ignore any and all criticism they recieve, as the critics are not contributing.... Wouldn't that lead to a complete halt in development? Isn't criticism (so long as it is constructive, obviously) a key component of (media/software) evolution?
    Ah, I see, then I  misunderstood the current state of the install media
    "Some adjustements"... Well, I guess we'll have to see how that goes, then. Hopefully it'll be smooth.
    @Everyone; Awebb possesses stunning accuracy as far as his observations go.
    @zb3; My point exactly.
    @tomegun; I believe you to be wrong; complaining (but not whining) is the first step towards improvement, as I think that I and zb3 has shown.
    Further, your last point (where you talk about "deep understanding of Y" and whatnot) is basically saying that only devs and programmers can contribute, so zb3's observation would be correct.
    Also, making suggestions is part of constructive criticism; you can do that even if you can't code, e.g. by saying "X works badly because it makes Y crash; couldn't we replace X with something akin to Z?". This is a valid point even if you have no intricate understanding of X, Y or Z, and if it is impossible to replace X for one reason or the other, it's not hard to reply with "Replacing X is impossible because of reason Q", and then see if someone can solve reason Q etcetera.
    zb3's example is obviously helping; for one, it would allow people to know taht they can't boot with systemd in certain cases, or that installing/runing systemd can break their system. I would consider that rather important information.
    @Everyone; Now then, to see if I can (or rather, if I can get help to) shed some light on some problems I've been having.
    My transition to systemd went pretty smooth (besides the fact that I couldn't use 'systemctl' to set anything, and neither duckduckgo nor any posts in the forums could help me (the error I continously got was "Failed to issue method call: Launch helper exited with unknown return code 1") and that there are no manpages/tips on how to configure the files for "localtime" and "adjtime", which would've been good considering some syntax have changed) to about halfway through, to the point where I was supposed to start using systemd for my daemons.
    Now then, to the main problem; first, I tried running
    "systemctl enable syslog-ng.service"
    and got the following message;
    "ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
    ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
    Since it doesn't exclusively say that something went wrong (at least as far as I can understand), I pondered the message a bit, but moved on to try and start dbus by issuing
    "systemctl enable dbus.service",
    to which I got the reply
    "The unit files have no [Install] section. They are not meant to be enabled using systemctl."
    This I can only assume is an error message of some sort, especially seeing as it says "not meant to be enabled using systemctl", but the wiki rather explicitly states that that is what I am supposed to do.
    I dare not move on (or attempt to start other daemons) without further advice, as I fear I might break my system. Any ideas as to how to solve this would be greatly appreciated.

    tcmdvm wrote:
    The message;
    "ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
    ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
    indicates that running "systemctl enable syslog.service" is now enabled.
    If you try running sytemtctl enable <whatever>.service and get
    "The unit files have no [Install] section. They are not meant to be enabled using systemctl." means there is no <whatever>.service file available to enable.
    The dbus.service as far as I know is already enabled when installing systemd and doesn't require any action.
    Ah, right, systemd is chatty (I'm of the old skool; if nothing is/goes wrong, a program should keep quiet).
    Oh ok, then I should dare more on.
    ZekeSulastin wrote:To be a bit more precise, it means the service is there but it's only used as a dependency for something else; the [Install] section of the file is what tells systemctl where to link it and such.  Also, where exactly in the wiki were you told explicitly to 'systemctl enable dbus.service'?  I can easily point you to the sections in both installation guides that tell you how to set things like /etc/localtime et. al (also `man 7 archlinux`), but not the one that said to manually enable dbus.
    Ah, I see; and well, I was told right here, going from the top, to "Enable Daemons formerly listed in rc.conf [...] For a translation of the daemons from /etc/rc.conf to systemd services, see: List of Daemons and Services.", and, using the list, dbus is mentioned there, as you can see. Since I started from the top, I did not know that you didn't need to enable that service. Perhaps it could be added to the descriptions of the relevant services in the Wiki which ones are autostarted?
    ZekeSulastin wrote:Lastly, I don't think trying to continue conversations from a closed thread is a very good idea, let alone doing it in a giant undivided wall of text that makes it quite difficult to pick out much any single topic.
    Meh, I directly refer to the relevant people, they can easily see their own old posts in the previous thread, etcetera... I think te ones who have something to say will be able to find my replies to their previous statements (or so I hope). For now, as everyone can see, I quote stuff (but man might I make some huge posts if I ever post again in the future, if I quote what I reply to).
    fsckd wrote:This is not really a technical support subforum. Moving from Arch Discussion to Newbie Corner.
    Ah ok, thanks (or perhaps a cautious thanks? Moving it to "newbie corner" might, after all, be a subtle insult...).
    tomegun wrote:It is not really possible to follow your message as you don't quote what you are replying to. Moreover, as the thread was closed I think that means we should stop the discussion ;-)
    Hmm, I think it means cop-out for lack or proper arguments/responses... But ok, I'll let it slide, for now (mainly as I can't do much else).
    tomegun wrote:You are not meant to enable dbus.service as it is enabled unconditionally. To check the enabled/disabled state of your services try "systemctl list-unit-files". "static" means that you are not supposed to enabled/disable it.
    Ah ok, thank you. Now, having abandoned all hope, I'll start configuring again and see how it goes... May the void protect me. If I die, grieve not for me, but remember me in the fight against hard-to-configure applications.
    (edit/addon)
    Actually, what am I supposed to do with "hwclock"? the List of Daemons only says that I shouldn't run that in tandem with ntpd, but I'm not running ntpd, so... How do I get hwclock with systemd?
    Edited for additional question.
    Last edited by incassum (2012-11-07 08:44:42)

  • Problems with a closed loop

    I will briefly describe what i am doing, but my problem is not with any hardware it is with programming iterative loops in labVIEW.
    What i am trying to do is get the input for an activex aircraft instrument. The attitude data is coming from an inertial sensor connected directly to com1. The activeX instrument that is causing problems is a turn coordinator. Which, in real life, includes a ball in a curved tube surrounded by a viscous liquid, sort of like a spirit level. I need to determine the position of this virtual ball based on the real acceleration data. My initial thoughts were, and would be possible in another language, start with an initial ball position. Using this initial position and body axis acceleration calculate th
    e tangential acceleration present on the ball and from this calculate the distance travelled in a small period of time. This short distance would then be added to the inital position to find the new position. The procedure would then start over with this new position. However i cannot just join the wires in labVIEW up like this as i get an error saying there is a closed loop that cannot be executed.
    Can anyone tell me how to construct a loop that uses an inital value which is then used in a calculation to update that inital value? Please find attached my very poor attempt at this VI. I hope things will be clearer by looking at my first attempt, and someone will be able to tell me what i am doing wrong
    Phil
    Attachments:
    TCtest.vi ‏102 KB

    Hello Laura,
    Basically what you'll want to do to get stated is to register your ActiveX object with the operating system. If the supplier's documentation of how to register is not complete, then I would suggest you take a look at the knowledgebase discussing manual registration of ActiveX objects.  
    Once the object is registered, you can open an ActiveX reference using the Automation Open VI on the block diagram. The registered object will show up as a selectable class in the class browser when you right click on the automation refnum. Now with the automation reference, you can use property and invoke nodes to interface with your remote control device. For an overview of ActiveX use in LabVIEW, please take a look at the linked application note. I hope this information is useful for you!
    Mike D.
    National Instruments
    Applications Engineer

  • HT6147 iOS 7.0.6 update - mail sending problems & uncontrollable apps closing

    Hi all!
    I’m having problems on two iPads after installing iOS 7.0.6 update. The first one is “sending mails via Exchange account and gmail is a NO GO!” an the second is “closing apps from time to time uncontrollably”. With iOS 7.0.4 this worked fine.
    Anyone with same or similar problems? Any suggestions on how to fix this?
    I already tried rebooting and deleting/adding accounts again in mail app with no positive effect.
    Since iPads are used by company’s managers where seamless emailing is crucial function, this made iPads expensive bricks and nothing more.
    The rest of iPads are to stay on the older version till this is fixed or workaround is found.
    Thanks
    Misci

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom 

  • Problem occurs during closing production order

    Hello,
    I have a problem regarding production order close status.
    After production order settlement when I close the production order, I  get the following errors during closing of production order by tcode co02
    "UNPROCESSED FUTURE CHANGE RECS FOR ORDER 1016590 PREVENT DEL FLAG"
    Please reply me for above errors solution
    with regards
    sanjay agrawal

    Dear,
    Please check any unprocessed goods movement in COGI and do the posting and settle the order again
    also check any confirmation is made after the settlement

  • On 12/23/11 I update the adobe flash player and have had problems since- unexpected closing and freezing. Remove the adobe flash player and those problems resolved. How do I go back to the earlier version of adobe?

    I was prompted by Firefox to update my adobe flash player on 12/23/11, which I did. Ever since then the web site has frozen and/or crashed. I run a internet business and can't have this continue. I uninstalled the flash player and the problems have stopped. I would like to reinstall the earlier version of adobe, since that didn't seem to impact the web site.
    This is the flash player I installed on the 23rd - Flash Player 10.3 for Mac OS X 10.4-10.5 (Intel)

    Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
    See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
    You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
    You can use this manual download link:
    *http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

  • Problem in TECOing/Closing the process order.

    Hi PP Gurus,
    We're facing a problem when trying to TECO the process order and system is generating the error message
    Message no. BS013 (System status CRCR is active (ORD 1000xxxxxx))
    We're using Browser based PI sheet here to process the order.
    If anybody faced the same, please reply.
    Regards,
    Abu Arbab

    Hi Rupesh,
    Thanks for reply
    Though we set 'Clear Reservation' in intial screen of COR6N/CORK/CO15/Co11N, it'll wok only for those components which are having Backflush indicator set. As in PI sheet, Goods Issues section is completely different and Ticket confirmation is different. And the components that we're using are not backflushed components, so it makes no sense though we put Clear Reservation in confirmation through PI sheet.
    Now the actual issue comes into picture when in Goods Issue table we put Issue indicator= final and it is properly updated for that component in MSEG table. But when we go and check in RESB table or COR3/COR2 there is no final indicator set in Component detail. Is this standard behavior of SAP or are we missing something here?
    Please help
    Regards,
    Abu Arbab

  • Problem in Perild closing

    Hello Expert,
    Greetings,
    My issue is when i want to close the period(Tr.code MMPV) 12 2010 in SAP,it throws me warning message "The specified year 2010 is not the current calendar year" when i press the enter it shows me the message "Invalid period  for company code XXXX;no conversion here.
    When I chacked in MMRV, it shows me
    Current  period             - 11 2010
    Previousperiod            -  10 2010
    Last period in prev.year-12 2009
    I have tried to change the period through OMSY also it shows message "The company code 1200 can no longer be initialized"
    Plz help me out with issue.
    Any suggestions will be highly appriciated.
    Best Rgds
    Nitin

    Hello Sir,
    I have chacked the settings in OMSY.It is extended enough to the period which I need to use.
    Now in OB29,when I selected varient "k4" & clicked on period to check the settings it shows me "Periods cannot be  mainted for calender-dependent financial year varients".
    What could be the problem? Plz help me out.
    Best Rgds
    Nitin

  • Will there be an update to v29 that fixes the problem of not closing? Reset, disabling add-ons, etc, did not fix it.

    After upgrading to v 29 four days ago, Firefox will not close 9 out of 10 times...get the error message that says Firefox is still running, close it or restart. The only way I have been to fully close Firefox is to force it to close by running CCLeaner or computer restart. I have tried disabling add-ons, safe mode, etc. I do not want nor should I have to lose settings by a reset. Given the other posts re: this same problem, this appears to be a Firefox v29 problem and not a user/customer problem. This is on a Win 7 machine running AVG Free.

    I have the same problems.
    Tried version 30beta without success
    Have to unload the Firefox process with Taskmanager
    I like the new version 29 but have gone back to trouble free version 28.
    Unless the problem can be fixed I will regretfully go to Chrome.
    My system is Win 7 (64Bit) with SP1 and all updates.
    Extensions are ADBlock, Better Privacy, Disconnect, Self-Dectructing Cookies, Foxflag, Colorful Tabs, HTTPS-Everywhere

  • Lightroom 5.7.1 errors/closes in developer pane- Win 8. as soon as the mouse enters the developer pane, it "encouters a problem" and requires closing

    newly installed LR, no previous versions. it all appears OK, I can navigate the library etc. When i select Develop, the controls around the preview screen (middle portion) are navigable. as soon as the cursor enters the center pane it errors out- see error message below. even if there is no image in the pane.
    "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
    it doesn't actually close it- but won't let you do anything until i click the "close program" button.Photoshop Lightroom

    See my reply on the Feedback version of this issue:
    http://feedback.photoshop.com/photoshop_family/topics/lightroom_5_import_creates_phantom_f olders

  • Problems with safari closing itself.

    I don't know what happens , but sometimes i open a heavy site and it close itself. is that normal ?

    There is a rumor going around the apple Inc. for improving this errors with its software upgrade 2.0.1. That the company Apple is already testing the first maintenance and security updates for version 2.0 of its i-Phone Software that aim to improve performance and fix a number of outstanding bugs. We do know by now that the testing began prior to the launch of device software 2.0 and the i-Phone 3G on July 11th. It further tells that apple is taking into consideration about the constant safari web browser crashes and among others things that were giving problems to the I-Phone customers/owners.
    But however its important to mentioned, Since testing has remained internal, it's unclear exactly what areas of the software the updates will target. Some users, however, report that iPhone Software 2.0 effectively crippled the camera applications on both their original iPhone and new iPhone 3G. Separately, a number of other users are reporting a variety of problems with the accelerometer on their new i-Phone 3Gs. These include jerky responses, unintentional landscape shifts, or no response at all after the handset sleeps.
    Message was edited by: John-macOwner

Maybe you are looking for