Problem in PO condition update

Hi Experts,
I am using 'IDOC_INPUT_PORDCR1' to post PO. Everything is working fine except the repricing.
ex:-
In me21 if we have 'UPDATE' button at condition item level. when I am creating i need to press UPDATE button select pricing type 'C' in order to populate 'FRA1' condition for the respective item. In the same way how can I pass the values to the IDOC.
Thanks in advance
Kumar

Hello
The condition type PBXX hits when there is no condition record maintained for the condition 'Gross Price'.
As u might be knowing that both PBXX and PB00 are the standard condition types for gross price.
There is a '6'(Condition Exclusion) given in the requirement column for PBXX which makes sure that both PBXX and PB00 doesnt come together in a price calculation.
After the first purchase of the material, the inforecord wil be updated with the gross price. So from the next time condition type PB wil be hit for gross price.
Hope this is what u were looking for.
Regards
Gregory Mathews

Similar Messages

Condition update???

hai all,
i want to use a condition type K004, and i have checked condition update
feature in the condition type template, i have maintained maximum condition value
in the condition record as 2000. and when iam creating order, the condition type should automatically get swithched after reaching the value of 2000.
but it is still appearing in the next created order.
whatis the use of condition update feature ?
kindly update the issue.
regards
sriram.

HI Sriram.,.,
This is the consept of condition update ,Please go through & check out whether you followed the same process or not
Condition update
Controls whether limit values are relevant for pricing.
E.g.: you can make the use of a particular condition record in the document dependent on a specified total value.
This total value can be specified in the condition record.
Condition Update -
This function is configured at the condition type level. it is basically used to update the pricing elements at various levels of the order cycle. like for example price calculated at the order level may differ by the time is delivery is due for that order. Pricing elements such as freight, taxes change periodically. therefore a condition update is needed inorder to update the pricing elements.
For validating the condition record for the first 100 orders,
you need to Customise the Condition type by checking the *condition update. *This will make the condition type updates.
In the maintaining screen condition record of the condition type go to Additional data and give the value either total value or the total number of orders(like 100 in your case).
This will make the condition record work for 100 times. You can also see the status of number of records that were already been utilised, in the Change condition record screen go to the environment and the cumulative values will give you total consumed sales orders. This will work for you
In a standard SAP system the check against number of orders is limitted to 3. So if you want to check against 100 you will have a problem. In this case you have to change the domain for "ANZAUF" as the value range is limited from 01 to 03. If you can convince your customer that you limit to first 99 than you only have to extend the range.
If you have to go for 100 or higher you have to change the length of the domain from 2 digits to whatever is required.
In both cases you change a standard SAP setting which will have an impact when you do a release upgrade.
REWARD if helpfull
Thanks & Regards
Narayana

No condition update from the sales orders exist - VK322 Message

Hello All,
I have activated " Condition Index" & " Condition Update" flag for one of my discount condition type and then created it's condition record along with scales on three levels. The condition type which I mentioned above is set as " Value Scale" in Scale Basis for checking the document value and apply the applicable discount percentage.
I have created three sales orders wherein the discount percentage is getting applied as per my condition record ( so, the document value is getting accumulated and compared with the condition record correctly ) but when I try to check the cumulative values ( ctrl +shift + F4 ) from the condition record, I get information message " VK322" mentioned in the subject.
VK322 -
No condition update from the sales orders exist
Message no. VK322
Diagnosis
The following causes are possible:
1. There are no sales orders for the condition record that you selected.
2. Updating condition records in the sales order entry is not active.
Procedure
Concerning 1:
Check the sales orders created for the condition record that you selected.
Concerning 2:
Activate the updating for condition records in the sales order entry.
I have checked everything in SPRO for this but could not find anything which can give me a clue to resolve this problem, especially " Concerning 2" part of this message.
My requirement > To be able to see the cumulative values from condition record.
Also, in which table the accumulated values get stored?
Appreciate your expert advise on this issue.
Regards,
Hrishi
Edited by: Hrishikesh Bhalwankar on Sep 13, 2011 1:59 AM

Hello Everyone,
I would like to thank each one of you for giving valuable inputs in regard to my requirement and I would like to let you know that I am able to achieve the results as per the expectation.
I would also like to share some key things which I did ( with the help of all your expert inputs ) due to which the requirement is met:-
1. Activation of ' Condition Index, Condition Update' in V/06 for the discount condition type.
2. Maintained ' B - Value Scale' in Scale Basis for the said condition type in V/06 - my requirement was to check against a value to apply the necessary scale base percentage.
3. Activation of ' S071' info structure via OM01
4. Condition record maintenance as per the required scales.
4. Written a new routine to check the accumulated condition base value from S071 along with the current document condition base value.
5. Put this routine in ' Scale Formula' in V/06.
This is giving me the perfect results for the correct application of the discount.
Just last question - How to re-organize the S071 info structure as I tried to re-organize it with Standard Program ' RV15F001' but it is not re-organizing this info structure... Any idea on this?
Thanks a lot friends for all your advice...
Regards,
Hrishi
Edited by: Hrishikesh Bhalwankar on Oct 11, 2011 2:11 AM

Problem with Nano after Updating

I recently bought an iPod Nano (Model MA005LL). When I first tried to put songs into it from iTunes it seemed like it worked - iTunes recognized it and successfully transferred the files. Then I noticed that couple of purchased songs didn't make it to my Nano's Playlist. I realized that I had to update the iPod Firmware. So, I downloaded & installed the latest Updater on my PC (running Win2K).
That's when the problem happened - during the update process, both my PC and Nano froze. So, I had no choice but to disconnect the Nano and kill the updater process. Since then neither does my iTunes recognize my Nano nor does the updater.
I think my PC recognizes it because whenever I disconnect the USB chord, the PC complains that I unplugged a device without stopping it first. Also, whenever I try to open Windows Explorer, it behaves extremely slow; whenever I plug it out, explorer goes back to normal.
I have tried ALL the 5 Rs and nothing works - the updater freezes everytime I try to use it with the iPod; so I can't restore it using the updater.
Another strange thing is that when I click on About, it not only says zero Songs & Photos, it also says 0 KB for Capacity & Available. The version does say 1.2 though. Also, the Format says Unknown.
So, at this point of time, my Nano is pretty much useless. I would really appreciate if anybody could please help me fix it such that I don't need to take it back to the store.

look on page 16(Help Nano 2g update problem) and if that does not help there is a really good one that I used myself on page 20(Problem with the update) which has a really good step by step process that returned mine to perfect working condition.

Problems with software the update with Nokia 6233

Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Wifi problem after.4.3 update on xperia z

Hi all,
After updating my Xperia Z (C6603) to build number 10.4.1.B.0.101 I've been having connection issues with every Wi-Fi network.
I've checked the forum but I only found problems about people having Wi-Fi issues with their smartwatch, I do not own a smart watch this is just a general networking issues.
Here's the problem in detail:
When having no Wi-Fi switched on while booting the phone the phone will start without any issues, I will receive my 3G/4G signal and I can browse, e-mail, everything.
Once I switch on Wi-Fi it will start connecting to previously stored Wi-Fi access points but will not connect. Eventually it says that there was a problem with connecting, even though this will take several minutes.
I can go into the Wi-Fi settings, select a different Wi-Fi network (if it is in range) and press connect, however the settings app will freeze at that point and eventually I'll get a notification that the settings app has stopped working.
I have found a "work-around": I switch the Wi-Fi to on, power off the phone and power on again. Now the Wi-Fi connection immediately powers on without an issue once the phone has completely booted, it also will connect to the default Wi-Fi connection that is in range. A different issue appears however once I move out of Wi-Fi range, it will no longer pick up my 3G/4G signal. It is also impossible to switch off Wi-Fi or switch Wi-Fi network connections without rebooting the phone.
As I said before this happened to me after updating to version 10.4.1.B.0.101 after having it received through OTA update. I do not have root access on my phone either so this can't be it.
Is there anyone experiencing the same issues? Is this somehow related to the issues people are experiencing with their smart watch connections (as seen in this topic: http://talk.sonymobile.com/t5/Software-Updates/wifi-problem-after-4-3-update-on-xperia-z/td-p/490591...
If there's anyone who is experiencing the same issues, or has found a fix for this I'd gladly hear from you.
Regards,
Danny
Sony Xperia Z
Modelnumber: C6603
Android version: 4.3
Kernal version: 3.4.0-ge09aff8
Build number: 10.4.1.B.0.101

I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

How do I let Apple know there is a print problem since the latest update?

Hi,
I am unable to print since I installed the latest version of Mac OS X 10.5.7 over the weekend. I use a Lexmark X5470 all-in-one printer. I had the same problem when I switched from Tiger to Leopard until Apple produced a patch. I tried it on both of my computers and I have the same problem on both.
How can I let Apple know that the same problem has occurred with the latest Mac OS X 10.5.7 update?
In the printing window I get two messages. The first says the there is a color missing , to delete and re-install the driver. The second, There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again.
Thank you for your help!

Allanfrance wrote:
Hi Nerowolfe,
I contacted Lexmark, it was them who told me to let Apple know about this problem. They were not aware of the 10.5.7 update????
That probably explains it. Sometimes a minor bug in 3rd party software becomes a problem after a system update catches it.
From all that I know (which is not much) it is not a problem that is specific to my macbook or g5. I will try to post the issue in bugreport.
They usually let you know if it has been previously reported and eventually, the disposition of the request.
You might try uninstalling and reinstalling the printer.
Did you use the full combo manual download? That would be another thing to do - you can reapply it over the one you have.
Also run DU and repair permissions before and after any update.

Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

Yes. Delete the Apps that were not Purchased using Your Apple ID.
But a Restore as New is the way to go.

Problems with Gband after updating to iTUnes 7 and Quicktime

Garageband has bee acting strange ever since the update and sometimes tracks freeze and it goes into a repeat which won't stop until I use the power button to shut down the computer. I am having multiple application problems since the forced update to iTunes 7. Anyone else having issues?

many times in the past, a quicktime and/or iTunes update has caused some weird stuff. Did you repair permissions after the update? Sometimes that will clear it up. Other times, many folks have gone back to the previous versions until a fix was found.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Problem using a conditional suppress in a cross-tab ?

is there a problem using a conditional suppress in a cross-tab on a row or summarized field in crystal XI?
I am using the following conditional suppress on a summarized field and its rows
         If {@SortCode}=4 then true;
Sortcode is a group sorting formula field
the summarized field is a formula field as well.
All of the summarized fields are suppressed although the cross- tab performs correctly on @Sortcode and the summarized field when not using the condition
it seems to me to be a reporting flow issue although i've included "whileprintingrecords" and "evaluateafter" with no success.
i have also moved the cross-tab from the report header to group header and applied a conditional suppress on the group header through section expert.
this supresses the group i dont want but includes grand totals for each group and also varys the number of columns
i can't filter on sortcode because one of the grand total calculations requires those records and a subreport or second cross-tab does not contain the same number of columns
the cross-tab is necessary as a client may have columns spanning one to many pages
thanks for your help

Hi I have a similar problem,
I have an clock in solution, where i have some dates with data such as, various entries for a date eg, 01/11/2010 1hr, 01/11/2010 3 hrs etc, 03/11/2010 2hrs , 05/11/2010 4.5hrs, 05/11/2010 4 hrs so i need total for each day and highlight only those days, where total is less than 4.5, including days which donu2019t have records eg 02/11/2010 & 04/11/2010, I summarise in totals using a cross tab, to get summarised output for each day as,
            Totals
01/11/2010    4
03/11/2010    2
05/11/2010    8.5
in order to get the dates which didnu2019t have records, i added a dataset from Excel spreadsheet where i just have a sequential dates for the year , and use record selection to select only those dates in range which i need to display, so the result i get
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
05/11/2010    8.5
so far so good, all using cross tab, now i want to suppress rows which have total > 4.5 so the result should be
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
How can i do that?

Sync problem - earlier today I updated both iTunes and my iPod Touch. Since then, I have tried syncing the two. The iPod Touch claims that there is no music on the iPod, however, when I connect it to my computer it says my full library is on there.

Sync problem - earlier today I updated both iTunes and my iPod Touch. Since then, I have tried syncing the two. The iPod Touch claims that there is no music on the iPod, however, when I connect it to my computer it says my full library is on there. At present, I am unable to listen to songs on the iPod when not connected to the computer. What can I do to fix this?
Thanks for any help!

- Have you reset your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next would be to backup your iPod and then restore you iPod from backup via iTunes.

After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?

After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?

THIS is "quite a few": https://discussions.apple.com/thread/3391947
As are these:
https://discussions.apple.com/thread/3391947?tstart=0
https://discussions.apple.com/thread/3484755?tstart=0
https://discussions.apple.com/thread/3481668?tstart=0
https://discussions.apple.com/thread/3518760?tstart=0
https://discussions.apple.com/thread/2755090?tstart=0
https://discussions.apple.com/thread/3507356?tstart=30
https://discussions.apple.com/thread/3482083?tstart=60
https://discussions.apple.com/thread/3492588?tstart=60
https://discussions.apple.com/thread/3397244?tstart=90
And older ones:
Battery Meter/Life Problems with 4.0.2
4.0.2 guzzling my battery. Your's too?
4.0.1 battery life
Battery runs out very quicky in iOS 4.0.1
Battery nearly nonexistant after 4.0 upgrade
Dead battery after few hours on standby using 4.0 software
3.1.3 battery problem
OS 3.1.3 battery issues
3.1.3 upgrade - shortened battery life?
Battery life cut after 3.1.3 update on iPhone 3G
3.1.3 Firmware is a battery killer - how do I back out this upgrade?
Poor battery life with iPhone 3G running 3.1.2
3.1.2 EXTREME battery drain - what gives?
3.1 Battery nightmare
iPhone 3GS with fw 3.1 – battery life gets even worse
Battery Issues with 3.0.1
BATTERY drain with 3.0
upgrade to 3.0 drains my battery
Battery Drain after Update 2.2.1
Battery Life Radically Decreased after 2.2.1 Firmware Update
As you can see, battery issues have been common since the first iphone, frequently reported after an upgrade, but not always. So to blame a specific version doesn't describe the problem sufficiently to find a resolution.

Problem in PO condition update

Similar Messages

Maybe you are looking for