Problem in posting Er PF Wage Types generated through Retro

Hello all,
I am running India Payroll in ECC 6.0 with HR Package level 52.
We have revised wages for two employees in the month of June with effect from 13.04.2010.
Retro has run successfully for two months April & May and all the wage types are calculated and passed on for FI Posting correctly except Employer PF Wage Types.
I am getting error while posting wages to FI as Employer PF Contribution & Employer Pension Contribution generated for April & May are not considered for FI Posting. Only current month values are taken into account. Whereas I don't have any problem with Employee Contribution. /ZF5 is generated with total of past two months contribution and also passed on to FI.
What might be the problem with Er PF Wage Types /3F3 & /3F4?
We have not posted June salary till now due to above said posting error. Now July Payroll is also started.
Experts, please help me to sort out the issue.
Thanks in advance.
Regards,
Hema

Hi,
Thanks for quick reply.
The error is "Posting balance not cleared".
We have changed all the components including basic salary. Payroll program has taken PF Basis correctly and calculated PF amounts, both for Employee & Employer contribution correctly for individual months.
As I mentioned for all the three months Employee Contribution is considered for FI posting through regular wage type for current month and through /ZF5 for last two months.
But for Employer Contribution only June amount is considered for posting even though the correct amounts are shown for other two months in RT (three lines for /3F3 & /3F4 each).
Due to this, total amount for Balance Sheet Accounts is less where as Expense Accounts is shown higher as Employer Contribution is not considered for April & May, causing imbalance in Accounting entries.
GL Accounts are mapped correctly. Otherwise even the current month amount will not be carried to FI.
Hope my explanation is clear.
Thanks & Regards,
Hema

Similar Messages

Posting Charateristics of Wage-Types

Hello experts,
I cannot see all wage-types in V_T52EZ (IMG node - define posting characteristics of wage types). When I try to copy and create the posting characteristics of these missing wage-types in the node, it throws error "......not defined in T52EZ".
Can someone help me out of it?
Thanks in advance.
Regards
Peeyoosh

Hi,
Try copying a model wage type in PU30 or OH11 and set proper characteristics in T511.
Then you can use your custom wage type for your FI posting.
Reward points appreciated,
Thank You,

Problem in Posting of GR for Subcontracting PO Through MIGO

Hi All,
When I am posting 101 through MB01 for Subcontracting PO The system is creating three line items in Material Document( 101, 543 & 545 ) which is correct.
But if i am doing the same through MIGO it is posting three line items as (101, 543 & 543) - Which is wrong.
I am using SAP R/3 4.7.
Please let me know if there is any OSS note to fix this.
Thanks a ton in advance.
-Nirupam

Hi,
I can't belive it....543 is showing Credit indicator and 545 is showing debit indicator. Which is perfect. So, when we receive a subcontracting PO, if at all there is any byproduct that is going to be received, it has to be either debit or credit (only one way) whether we receive from MB01 or MIGO. If you see 545 in MB01 that means, you are receiving by-products along with ....However, in MIGo you are showing only 543 (consumption of components).....Are you missing any by-products comingup in mIGO? Is the PO the same you are using in both MB01 and mIGO....very minimal differences in terms of functionality we may encouner between these two transactions but I strongly doubt about posting two different movements types for exactly the same data....I am not doubting you; just curious to work on such problem. Please cross verify again and let me know.
Regards

Re:problem with employeer pension contribution wage type /3f4

hi,
One of the the employee not calculating employeer pension contribution wage /3f4 even though iam maintain the master data
in infotype 0587 for him we are maintain PENSION TRUST ID ,PENSION NUMBER and also pension contribution details also.
but iam checked his date birth is 1948 his age is almost 61 years but pf wages are calculating correctly /3f1 ee cont and/3f3 er cont please any body knows the reason for not calculating employeer pension contribution let me reply.
regards,
mgr

Hi
For an employee who has attained 58 years of age ,there will be no pension contribution calculated.
Here the age of the employee is 61,therefore there will be no pension contribution
Regards

Urgent: Posting to different Symbolic Accounts for the same Wage Type

Hi Everyone,
Assuming that I have a Wage Type and 2 sets of Symbolic Accounts tied to their respective Chart of Accounts (belong to 2 different companies).
When I go to the configuration node "Define posting characteristics of wage types" in SPRO, under Payroll, I have assigned Symbolic Account 1234 (which belongs to Chart of Accounts A) and Symbolic Account 6789 (which belongs to Chart of Account B) to Wage Type 1000.
When I execute the Transaction for Posting to Accounting (PC00_M99_CIPE), I get an error (Message: Posting Balance is not cleared). After exploring the log, i notice that both Symbolic Accounts appeared.
How do i ensure that only the specific Symbolic Account is being posted?
Take for example that the employee belongs to Company A.

Hi,
U can post to different accounts for same wage type but NOT symbolic accounts!
Do as follows:
1)-Define employee grouping account determination(PPOMD feature)
2)-Define symbolic accounts
3)-Assigning Accounts
When doing 3rd step, click "RULE" button and select "Employee group".
By doing so you can posting same WT to different Accounts according to different employee grouping , like below:
SymAcc   Grp             Account
Z001     GU     5502019900
Z001     SZ     5502019901
Z001     YY     5502019902

How to assign new vendor to existing wage type - urgent help needed!!

Hi SAP Gurus,
I have a query for south African payroll-
I want to assign an exiSting wage type (i.e Transport 1234) to new vendor (600139)The above wage type is aleady assigned to old vendor (600136)
Hence from 1st June2007 onwards, the wage type will be assingned to new vendor, hence where we assign this wage type to new vendor?
I have already done some changes in (IMG--SA payroll Reporting for Posting Payroll Results to AccountingActivities in the AC-SystemAssigning AccountsAssign Vendor Accounts , where I have assigned symbolic a/c to new vendor)
Also, I have copied the wage type, Transport with new validity i.e 1st June2007.(IMG-SA payroll Activities in the HR-SystemMaintaining Wage Types--Define Posting Characteristics of Wage Types)
Hence, I wanted to Know, how the wage type will post new vendor form 1st June 07?? is there any other way to addign the wagtype to new vendor??
Hence, required your valuable inputs for same.......... )
Points will be rewarded for same
Tnkx & regds,
Nithibabu

Yes ,
Assigning WT to new vendor through that i explain.
just assign you WT to Symbolic account and further link will get created.
Each employee is having its own vendor account if you don't have that then its very difficult to understand where the amount is going
so when you make a payment to employee that payment is go and seat in to his/her vendor account so for that purpose you have to assign the employee id to employee vendor, so if you don't have relation between employee and vendor how you come to know that for which vendor the amount is paid.
so for this purpose we need to assign the employee id to vendor.
in SAP employee is treat as vendor and customer also.
This setting is done by FI consultant.
ask your FI consultant he will do for you.
Vicky

Regarding Wage Type

Dear Sapients,
I have created eight wage types in IT0014.
In IMG
Payroll International -
Reporting for Posting Payroll Results to Accounting -
Activities in HR System -
Maintain Wage Types -
Define Posting Characteristics of Wage Types
I could see only 03 wage types out of eight wage types.
Why it is so????
Shall I create new enteries in this IMG, what will be the implication if I do so??

Hi Prabhu,
Please check the node: "Check Entry Permissibility per infotype" for IT0014.
Also make sure that your custom wage type is available in the wage type group for IT0014. Try t-code PU98.
Hope this helps,
Reward points if helpful,
Thank You,
Message was edited by:
Arun Sundararaman

Assign of G/L A/c to a wage type?

Hello,
What are the steps how to assign a G/L A/c to a wage Type.Please let me know the full steps.

Hi,
Directly we could not map the g/l accounts to wage type.
in between one interface is there, ie., called symbolic account.
actual mapping process is;
symbolic accounts
mapping the wage types to sysmbolic account
mapping the symbolic accounts to G/l accounts(DR, Cr)
Integration steps:
Define symbolic accounts
Define posting characteristics of wage types
Assign balance sheet accounts
Assign expense accounts
In the above 4 nodes mainly we are using for integration.
SYMBOLIC A/C: HR people will create the symbolic account. Symbolic a/c defines the type of account.
Payroll (PY) wage types are not assigned directly to accounts in Financial Accounting (FI). This is done using symbolic accounts. A number of wage types, which the system should post to a certain account in Accounting are assigned to a symbolic account in Customizing. The account assignment type of the symbolic account determines the type of posting (for example, posting to an expense account, debit posting or credit posting). The symbolic account is then assigned to the account in Financial Accounting. If the account in Accounting is an expense account, it is usually assigned a cost element in Controlling (CO), which is used for posting personnel costs (actual data) and for transferring personnel cost planning and simulation data (PA-CP).
To symbolic account we need assign the "account assignment type", . To wage types we need to assign the symbolic accounts in the table of V_T52EZ, depend on the account assignment type , we need to assign the G/L accounts.
If symbolic account assignment type is "F", we need assign symbolic account to G/L account in the t.code of OBYG,
If symbolic account assignment types is "C" , weed to assign symbolic account to G/L account in the t.code of OBYE.
Regards
Devi

Calculation of difference of wages types master data and accounting cluster

Hi, I am developing a ABAP HR report for calculating the difference of wage types master data and accounting data and in the output i need to display the fields like
Officer in-charge of payroll accounting
Officer in-charge of Support
Officer in-charge of time recording
also from where I could get the accounting cluster data for the wage types
I want to know from where I can get these fields and how ther are related with wage types.

Check through PA30,there are different infotypes by which these data are maintained in the Employee Master.

No /559 wage type in posting run - Program RPCIPE00

hello everyone,
I have created a posting run for an employee via report RPCIPE00.
the scenario is employee was not paid in period 26/2007 (26 in 26), he got paid in 26 in 27 ( period 27/2007) but there was no payment for 27 itself only the inflow from 26 was paid.
system should post the amount in bank transfer wage type /559 but there is no /559 wage type in the posting run created.
the same scenario was working in past so may be some customizing setting has changed somewhere..
any inputs from you people will be highly appreciated.
thanks.

Just normal employee, As I said in display log mod when running Posting, I can see wt /559 in current period, but checking posting document, there is no wt /559 inside.
Have you faced it before? It's total standard process by running standard T-code for posting to FI.
Actually it's special ee, this current month ee is withdraw from 1st date, i guess it's reason SAP didn't generate current month in posting document (only fro retro active period), but not sure. And very strange why can see in display log mode, but cannot see in document, should be same. Anw I raised OSS message to SAP about it, maybe it's hidden issue of SAP
Regards,
Woody.

ISSUE IN FINANCE POSTING OF WAGE TYPE

Hi
I have a problem in posting of wage type to finance. Employee joined in 23rd Sept 09. By the time Payroll has locked. His payroll processed in Oct 09. Payroll has functioned sussessfully. the wage type /3s1 was not posted correctly.the amount of /3s1 pertaining to sept 09 8 days has doubled in posting. We checked the scenerio in Dev client. The /3s1 wage type correctly posted without excess posting in Dev Client.
where could be the problem in Production.
Request to help in the matter
Thanks & Regards
EKP Yadav
M:9000184456

Hi,
Could you post the exact error?
thanks.
JB

Problem in Wage Type Creation

Dear Gurus,
I am going to configure wage types in IDES ECC6. I want to configure Wage Types for Infotype 0014 for Recurring Payments & Deductions. When I configure these wage types, it does not appear in infotype 0014 instead it appears in infotype 0015. I use country grouping 99 and select Recurring Payments and Deductions in SPRO. When I check the wage types in infotype 0014, there only appears CM01,CM02, CM03. Such type of problem has never occured in production servers. Please advise me what is the cause of missing wage type in infotype 0014.
Best Regards.
Ali

Brother I just opened the table VV_52D7_B_0014_AL0 and then created a wage type again with description of your name (Sikandar"
Now the wage type appears in info14. Thanks for your kind guidance and hope for the same in my future issues.
Your brother
Ali Rahman

HR-abap problem in getting wage type in 0008 infotypes

i am creating sap scripts for appointment letters in that i am coolecting data from table pa0008,
for that i am using field bet01 , bet02, etc for the diff. allowances .
if the order of allowances are changed in 0008 infotype then field form which i am getting amount is also getting changed.
E.G :- i am using perticular order in 0008
            then it gives me wage type in lga02 and corresponding amount in bet02 for first allowance
                                    wage type in lga03 and corresponding amount in bet03 for second allowance
and now if i interchange order of allowances in pa008 then t gives me
                               wage type in lga02 and corresponding amount in bet02 for first allowance
                                wage type in lga03 and corresponding amount in bet03 for second allowance
i hope you understnad my problem .
Thanks in advance

Hi,
please check thiscode
call function 'RP_FILL_WAGE_TYPE_TABLE_EXT'
       exporting
            appli                        = 'P'
            pernr                        = p0467-pernr
            infty                        = pinfty
          SUBTY                        = PSUBTY
          OBJPS                        = POBJPS
          SEQNR                        = PSEQNR            "QEAK100596
          waers                        = sy-waers          "XYMK097435
            begda                        = datum
            endda                        = datum
       tables
            pp0001                       = p0001        "input
            pp0007                       = p0007        "input
            pp0008                       = p0008        "input
            ppbwla                       = ppbwla       "output
       exceptions
            error_at_indirect_evaluation = 1.
check sy-subrc eq 0.
loop at ppbwla.
    if ppbwla-waers ne q0467-waer2.
      perform convert_to_local_currency using
              ppbwla-betrg ppbwla-waers
              q0467-waer2 ppbwla-betrg
              datum.
      modify ppbwla.
    endif.
endloop.
Ref program
MP046740
Thanks and regrds
Durga.K

Wage type report problem

Hello to all
I am getting a problem.
In 190(Development)..
In PA30 and infotype 8 some wage types are included for employees.
But these wagetypes are not refelecting in PA0008 table.
When i went into change mode of PA30 and then save ... then these values are
reflecting in PA0008.
But in 300 when i am doing this it is not coming..
Plz guide me..
I am using these wage types...
BASIC LIKE PC207-BETRG,                              "1000 Baisc
      HRA    LIKE PC207-BETRG,     "1002 House Rent Allowance- Del
      PERPAY LIKE PC207-BETRG,     "1001 Personal Pay
      HRA2 LIKE PC207-BETRG,      "1003 House Rent Allowance -Oth
      SPL_ALL LIKE PC207-BETRG,    "1004 Special Allowance
      PRS_ALL LIKE PC207-BETRG,    "1005 Personal Allowance
      CANTEEN LIKE PC207-BETRG,    "1007 Canteen Allowance
      WASHING LIKE PC207-BETRG,    "1008 Washing Allowance
      SPL_PMT LIKE PC207-BETRG,    "1009 Special Payment
      TRANS_ALL LIKE PC207-BETRG, "1010 Transport Allowance
      STIPEND LIKE PC207-BETRG,    "1011 Stipend
      HRA3    LIKE PC207-BETRG,    "1012 House Rent Allowance -Trn
      SPRT_ALL LIKE PC207-BETRG,   "1014 Supporting Allowance
      OVRS_ALL LIKE PC207-BETRG,   "1015 Overseas Allowance
      VAR_DA LIKE PC207-BETRG,   "1016 Variable Dearness Allow.
      CLA     LIKE PC207-BETRG,   "1017 company leased accom
      COA     LIKE PC207-BETRG,   "1018 Company owned accom
      FS      LIKE PC207-BETRG,   "1019 Furniture Scheme
      WAT_DED LIKE PC207-BETRG,    "2000 Water charges deduction
      TRN_DED LIKE PC207-BETRG,    "2001 Transport deduction
      SCH_DED LIKE PC207-BETRG,    "2002 School fees
      SH_REM LIKE PC207-BETRG,     "1023 SHOE REIMBURSEMENT "SOC BY ANUBHAV
      OFF_ALL LIKE PC207-BETRG,    "1064 OFFICIATING ALLOWANCE
      CHLD_ALL LIKE PC207-BETRG,   "1065 CHILD EDUCATION ALLOWANCE
     TWRNTMM_ALL LIKE PC207-BETRG, "1066 TOWNSHIP ALL MM
     TWRNTNM_ALL LIKE PC207-BETRG, "1067 TOWNSHIP ALL NM "EOC BY
      LIC     LIKE PC207-BETRG,                             "2008 LIC
      ADV_ADJ LIKE PC207-BETRG,    "2009 Advance/Adjustment
and then fetching this values using....
do 31 times varying lga from p0008-lga01 next p0008-lga02
             varying bet from p0008-bet01 next p0008-bet02.
    CASE lga.
*-- Read the value and stored in internal table
      WHEN '1000'.
        ITAB-BASIC = ITAB-BASIC + BET.
      WHEN '1002'.
        ITAB-HRA = ITAB-HRA + BET.
      WHEN '1001'.
        ITAB-PERPAY = ITAB-PERPAY + BET.
      WHEN '1003'.
        ITAB-HRA2 = ITAB-HRA2 + BET.
      WHEN '1004'.
        ITAB-SPL_ALL = ITAB-SPL_ALL + BET.
      WHEN '1005'.
        ITAB-PRS_ALL = ITAB-PRS_ALL + BET.
      WHEN '1007'.
        ITAB-CANTEEN = ITAB-CANTEEN + BET.
      WHEN   '1008'.
        ITAB-WASHING = ITAB-WASHING + BET.
      WHEN '1009'.
        ITAB-SPL_PMT = ITAB-SPL_PMT + BET.
      WHEN '1010'.
        ITAB-TRANS_ALL = ITAB-TRANS_ALL + BET.
      WHEN '1011'.
        ITAB-STIPEND = ITAB-STIPEND + BET.
      WHEN '1012'.
        ITAB-HRA3    = ITAB-HRA3 + BET.
      WHEN '1016'.
        ITAB-VAR_DA = ITAB-VAR_DA + BET.
      WHEN '1017'.
        ITAB-CLA = ITAB-CLA + BET.
      WHEN '1018'.
        ITAB-COA = ITAB-COA + BET.
      WHEN '1019'.
        ITAB-FS = ITAB-FS + BET.
      WHEN '1023'.                                 "SOC BY ANUBHAV
      ITAB-SH_REM = ITAB-SH_REM + BET.
      WHEN '1064'.
      ITAB-OFF_ALL = ITAB-OFF_ALL + BET.
      WHEN '1065'.
      ITAB-CHLD_ALL = ITAB-CHLD_ALL + BET.
      WHEN '1066'.
      ITAB-TWRNTMM_ALL = ITAB-TWRNTMM_ALL + BET.
      WHEN '1067'.
      ITAB-TWRNTNM_ALL = ITAB-TWRNTNM_ALL + BET.    "EOC BY ANUBHAV
       WHEN '1014'.                               "added for support allowance and overseas allowance
        ITAB-SPRT_ALL = ITAB-SPRT_ALL + BET.
      WHEN '1015'.
        ITAB-OVRS_ALL = ITAB-OVRS_ALL + BET.
    ENDCASE.
enddo.
rp-read-infotype pernr-pernr 0014 p0014 p_begda p_endda.
loop at p0014.
    CASE P0014-subty.
      WHEN '2000'.
        ITAB-WAT_DED = ITAB-WAT_DED + p0014-BETRG.
      WHEN '2001'.
        ITAB-TRN_DED = ITAB-TRN_DED + p0014-BETRG.
      WHEN '2002'.
        ITAB-SCH_DED = ITAB-SCH_DED + p0014-BETRG.
      WHEN '2008'.
        ITAB-LIC = ITAB-LIC + p0014-BETRG.
    ENDCASE.
ENDLOOP.
Plz guide me....
Thanks
Anubhav

I suppose Error in HRA info type is because i have not maintained the basic pay info type so far.Once i get able to save the basic pay info type i think i would also be able to save the 581 info type.
i am still not qable to resolve the issue of basic pay info type.whenever i try to save the basic pay info type system gives the message "wage type model changed".detail message is as follows
Wage type model changed on 01.07.2007
Message no. RP129
Diagnosis
You must use the new wage type model as of 01.07.2007 when copying a 'Basic Pay' record (0008). This model depends on the feature 'LGMST'.
You can display the old record with the overview function.
System Response
The new wage type model is displayed.
Regards

Wage type Creation Problem ( No values selected )

Hi,
I have a problem creating wagetype. when i go to transaction OH11, when i click on the dropdown list ORIGINAL WAGETYPE, it gives me the following error : "No values selected Maintain entries?"
Since a wage type cannot be created from scratch and should be copied from original wagetypes, I am blocked. Could you please tell me what is the problem.
Than you.

Hi,
Whichever country wage types you required, Create the wage type in the table of V_512W_T, in this table copy the any one wage type or directly you can create the new wage types with the new entries tab.
If you create the new wage types then you need to maintain the all PC and CC and EC in the table of V_512W_D.
Otherwise copy the wage type from the existing wage type, then no need to maintain the all PC, Cc, Ec.
Good luck
Devi

Problem in posting Er PF Wage Types generated through Retro

Similar Messages

Maybe you are looking for