Problem in posting excise invoice(part2)
hello gurus,
i am facing one serious problem. i am using 46c version.
in case of import procurement . i am not able to post excise invoice .the step i am following are as follows
1.after doing MIRO i captured excise for CVD through j1iex with refernce to purchase order , pop up menu appears , i put MIRO number and years. system generated internal excise invoice no.
2.GR process done with refernce to PO.
3.than i create part1 through j1i5.
than after i am trying to post part2 by tcode j1iex again but it shows message that no part1 exist .
how i can solve this problem, can any one tell me whole cycle for import purchase in sap 46c.
one more question while making MIGO with refernce to PO one pop up screen should appear for entring MIRO no for reference (as it appears in SAP47c and above), but it is not coming in sap46c. can any one help me whether it is possible in sap46c or not.
regards
ashwani tripathi
Hi,
Generally, for Import procedure folowed is.
- PO created without GR/IR Unchecked and for Customs duties conditons are correctd with Custom vendor number
- MIRO done for the Customs Vendor ( after the receipt of Goods )
- MIGO done for the Goods ( when Tcode is excuted it will display the Doc number Generated in the MIRO run, or you have to input the correct number )
- J1IEX done for the part2 posting
Regards
Similar Messages
-
Problem in Posting Excise Invoice
Hi,
I am posting a Excise Invoice thru J1IEX_P, but while posting the document I am getting a Error as " Balance In Transaction Currency".
This error is prevailing is there from long time. Can anybody please suggest some solution over this.
Regards,This error comes due to mostly in case of capital goods transaction.
Suppose, Basic excise duty is 160.83 and education cess is 3.22
So, System will generate entry as follows
Cenvat on hold Dr. 83.64
Basic exise duty Dr. 80.42
Ed cess Dr. 1.61
To Cenvat Clearing 164.06
So, kindly inventorised one rupee in order to post the invoice in excise details tab
Avinash -
Problem in Capturing & Posting Excise Invoice
Dear Experts,
As my client is facing problem to post Excise Invoice.
User has done Import PO, Invoice Verification for custom duties(BOE) and GRN. When i am going to capture excise invoice reference with Material Document i found that Part I entry is already created but Internal Number and Year showing Zero i.e.not generated.
User already dispatched material so we cant cancel GRN and update RG23A Part I entry through J1I5. Now i need to Post excise invoice but i dont have Vendor Excise Invoice and Internal Excise Invoice Number. Please tell me procedure that how to Update RG23A Part II entry.
Immediate reply appreciated.
Sachi,
there seems to be some problem at the time of GR.
Since Part1 has been created , its a bit difficult to take part1 because as u told internal no. & year is bank.
How ever you can folow one of the paths below to serve your purpose of cenvat credit availament.
1. Capture against GRN -J1IEX and save. Check whether part1 link is available with the ID.
If not take the credit through J1IH->additional Excise & give ID no. as reference doc no there.
2. If Part1 tab is present after creation of ID but credit available is zero, try changing the material type & saving the ID which will trigger A part1 cancellation so that correct part1 can be done later & credit can be availed through j1iex itself.
These steps may involve a solution other possibility which is always open is debug but thats not suggested. -
Error while posting Excise Invoice
Hi Experts,
I have captured incoming excise invoice for an Import PO of Asset material.
GR has been made.
Also partial payment to vendor has been done through MIRO.
During check it do not show any ERROR message
While posting Excise invoice , error message is displayed "ACCOUNTING DOCUMENTS NOT GENERATED"
and immediately current session is closed
How to solve the problem?
Regards
JaiHi,
Import cycle :-
1. MIRO-Bill of Entry
2. Excise Invoice capture
3. Goods Receipt
4. Excise Invoice posting
5. MIRO -Vendor settelement
Tcode you used for capturing excise invoice - j1iex
posting the excise invoice. j1iex
Thanks
jai -
Cancellation of posted excise invoice
Dear All,
How to cancel posted incoming excise invoice without cancelling the GRN.
User had posted the excise invoice wrogly so now they want to cancel that. For this we have to first reverse GRN but stock also get consumed meanwhile so system is not allowing to reverse GRN. How to resolve this?
ManojDear All,
We can cancel the posted excise invoice for purchase also.
But for that we have to first revers the GRN.
Now in out case it is not possible to revers the GRN.
How to solve this?
Manoj -
Reversal of posted Excise invoice ??
Hii
Some body explain the steps involved in reversal of excise invoice posted..??
Like i have created Po, GR done , uring GR i have captured and posted excise invoice .
Now i wanted to reverse the availed CENVAT credit and reversal of excise invoice posted .
ThanksHi,
01. Reverse the goods receipt.
The system:
Creates a reversal document to cancel the goods receipt
Creates additional entries in Part I of the appropriate excise register to reverse the original entries
Changes the excise invoice document status to In process.
Reversing Goods Receipts
From the SAP Easy Access screen, choose Logistics --> Materials Management --> Inventory Management --> Goods Movement --> Goods Movement (MIGO).
In the top line:
Select Cancellation.
Select Material document.
Enter the number of the goods receipt that you want to cancel
Choose .
Flag all of the line items as OK.
Save the reversal document.
02.. Reverse the CENVAT posting on the excise invoice.
The system:
Creates an accounting document to reverse the CENVAT postings
Creates a corresponding entry in Part II of the appropriate excise register
Reversing CENVAT Postings
From the SAP Easy Access screen, choose Indirect Taxes --> Procurement --> Excise Invoice --> Incoming Excise Invoices --> Individual Processing --> Change/Display/Post/Cancel.
In the top line:
Select Post CENVAT.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Choose Simulate CENVAT.
A dialog box appears, showing which postings the system will make to reverse the CENVAT.
To close the dialog box, choose .
Choose Post CENVAT.
03. Cancel the excise invoice.
The system changes the excise invoice status to Canceled.
Canceling Excise Invoices
From the SAP Easy Access screen, choose Indirect Taxes --> Procurement --> Excise Invoice --> Incoming Excise Invoices --> Individual Processing --> Change/Display/Post/Cancel.
In the top line:
Select Cancel.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Save the excise invoice.
Regards
KK -
Problem on Posting Parked Invoices during MIRO
Hi SAP Gurus!
Good day! I'm experiencing a problem during posting Parked Invoices thru MIRO. First I've parked invoices thru MIR7, then when I go to MIRO to post the invoices, the Parked Invoices are not reflected in the "Worklist". What is the possible problem here?
Hope you can help! Thank you.
MikHi Gurus!
Thanks for the input, but I want the parked documents to be reflected in the posting of invoices (MIRO).
Actually, in both DEV and QAS servers, the parked invoices are reflected, but in PROD server it is not reflected. I don't know what happened. Can you please help.
Thank you.
Mik -
Hi friends,
How to cancel posted excise invoice(GR is completed) ?
Regards,
ChetanHi friends,
I have already tried it in quality system.
1.After cancellation of GR.I tried to post excise invoice but system showing the messege that No Part I exists for availing credit in excise invoice TEST 1 2007
2.J1IH reverse the entry but system is not showing these entries in excise invoice.
so due to this while entering Vendor invoice in miro system showing tax amount from excise invoice.if reduce tax amount then system showing balance in transaction currency.please suggest me whst to do ?
Regards,
Chetan. -
Steps to Capture and post Excise Invoice....
Hello Gurus,
Can any one provide me the detailed steps for capturing and posting excise invoice. I did try with J1IEX and even with J1IEX_C and _P.
Thanks N Regards,
Venu MG
MM ConsultantHi,
Prerequisite: - For Capture or Post excise invoice first required to capture or only part one option at the time of Good Receipt creation.
Then Go in J1IEX.
Change Excise Invoice :-
If you want to change excise invoice, Select change tab >> Vendor Excise Invoice No >> Enter vendor excise invoice no.
Then change excise detail and click on Simulate cenvat button >> Save.
For Post: -
Enter J1IEX >> Post >> Vendor Excise Invoice Number.
Enter Required detail like Date etc...
Then click on Simulate button >> Click on Post cenvat button.
Regards,
Mahesh Wagh -
Cess not calculating while posting excise invoice
Hi,
while posting excise invoice cess(2% & 1 %) is not calculating on BED account.
pls tell what r the settings required to calculate cess on BED while posting.
Regards
SunilHi
Ensure that you have maintained the excise defaults for Ecsess( Against ECS AP) and Shecess condition type( AP AT1 Cond) in
SPRO-Logisitcs general-Taxes on goods movement- India -Basic settings- Determination of Excise Duty- Maintain Excise defaults
Also check in PO the ECS and SHEcess values are non Zeroes
Regards
Sandeep
Edited by: sandeep13 on Nov 25, 2009 9:45 AM -
Problem in Depot Excise Invoice - J1IJ
Dear friends,
The business process is like this- After reaching the material to the depot they torn the bags and sell it as loose material and change the storage location (plant is same), this change is being done with movement type. After selling the material to the customers depot invoice J1IJ is not getting generated. (While doing STO J1IG is taking place with a different storage location).
So here what should I do to rectify the problem.
Regards,
SreehariLet me know whether GR and Excise capturing is done for full bag
If so Go to J_1IRG23D Table in SE16 chage the unit from Bag to Kgs and change qty appropriatley.
Then while billing material to customer in losse qty you can post excise IN J1IJ for QTY which ur dispatching.
If ur porblems sloves just tell and also give some reward points
Rgds
BJ -
When MIGO Doc posting Excise Invoice BED,AED,SED,ECS,CESS Not displayed
dear Gurus ,
i have one problem when i and posting the document through MIGO T-code the doc is posted but these values is not appearing in the screen
Click on bottom of Excise invoice then put data on each of the fields for ex :- BED
AED
NCCD
SED
ECS
Then this data will be print on top window of the Excise invoice column .
BED 0.00 SED 0.00 SECess 0.00
AED 0.00 ECS 0.00
NCCD 0.00 CESS 0.00
but this data is not displayed in the screen but doc is posted successfully .
we are upgrading the system for 4.7 to ECC 6.0 after that this problem comes kindly send me the solution or is there any configuration wise changes or some support package or note is applying kindly send me the details and feedback
regards
ritesh sharma
SAP ABAP ConsultantHello,
In my opinion you have not maintained the Excise details.
Maintain
Chapter ID
Material & Chater ID Combination
Assesable Value
Cenvat Determination
Vendor Excise Details ( Check the Excise Indicator) as 1
because of not maintaining these Excise details, values are not caluclated in the Purchase Order.
Due to this reason while doing Goods receipt, system is not getting the Excise Values.
Please maintain and let me know.
Regards,
Kumar -
Problem while creating excise invoice by J1IJ
Hi Friends
I am creating excise invoice from delivery for a depot using T-c0de J1IJ . Problem is every time when I select RG23 in drop down menu after entering delivery no, excise gp and series gp and and save it, system gives error that item is incomplete so excise invoice cannot be generated.
Can anyone pls let me know what is the problem. I though found one things that there was no excise value in the J1IJ screen. i.e bed and other excise duties were 0, so could this be the problem?
Thanks
AmitHi Friends
Let em explain you the process so as to analyse the problem clearly.
this is a trading process. My client is creating PO in advance and not on teh basis of PR generated after sales order.
SO process they follow is create sales order, delivery, gate entry, weightment entry, PGI and then J1IJ and invoice.
Here plant is a depot, so it is some kind of a depot sales process.
Dear G. Lakshmipathi
As suggested by you, will J1IG process be relevant in this case?. If yes then on what basis PO will be genrated here as my client is not generateing any PR w.r.t to sales order. Please advice.
Waiting for your reviews.
Thanks -
Problem in export excise invoice under bond
Dear Gurus,
I am creating excise invoice for export under bond, in T-code J1iin, in utilization tab when i change to export invoice then it became mandatory for deemed export while i set it for under bond by following path
maintained in IMG Path -- Logistics-General --> Tax on Goods Movements --> India --> Business Transactions --> Outgoing Excise Invoice --> Maintain Default Excise Group and Series Group.
For that series group,excise group,sales area, plant,shipping point, I maintained Export under bond
But still problem is there.
Please give me solution
Thanks & RegardsHello Rajesh,
While creating excise invoice for export excise invoice if duty values are getting nullified after selecting
utilization TAB, excise invoice type BOND, then kindly use the user exit J_1I7_USEREXIT_DUTY_IN_EXPORT
here pass the suppress calculation = X. So duty values will get copied from the billing document. If it is left
blank system will recalculate duty while creating excise invoice.
Best Regards
MBS -
Problem in capturing excise invoice
Dear Experts,
I am facing problem at the time of capturing excise invoice in J1IEX.
A message always displays is "Excise Details are not maintanied for Vendor 9000232"
Message no. 8I565
When i am entering excise invoice with reference to PO, without PO or even the Goods Receipt.
Can anybody tell me how to overcome this error.
Thanks & Regards
Prasant Sekharhi,
In J1id maintain vendors excise details
Regards
Kedar
Maybe you are looking for
-
The iCloud id on the Mac is the old mobile me one. I no longer have any use for it and want to use the id that is used for purchasing and is on my iOS devices. It would enable me to make better use of I stream between the Mac and the iOS devices
-
Having connectivity problems with itunes
Hi i'm having some connectivity problems with itunes i can open up the itune folder on my desktop but it will not connect to the itunes store, Any ideas of how I can get round this both my laptops will connect but not the desktop and of course thats
-
Can I use office jet 100 mobile printer on Bluetooth?
I am looking for a mobile printer for use with our ipad2 in our motor home that does not rely on wi-fi.
-
Hi, I have the following archive backup and maintenence scripts configured in my cron which run on a daily basis. How ever of late I faced an issue where in the archive destination got filled up. On check I found that there were archives that were ol
-
I need to configure our Cisco Aironet 1200's for multiple VLANs. VLAN101 is for public use & VLAN2 is for employees only. Existing config is attached. I need: 1. To disable the broadcast of VLAN2's SSID so that only VLAN101 shows up in the SSID list