Problem in posting FB01transaction using function modules
Hi,
I am uploading the data to transaction FB01.
For that i have used three function modules:
1, POSTING_INTERFACE_START
2, POSTING_INTERFACE_DOCUMENT
3, POSTING_INTERFACE_END
The this is, i have added 2 custom fields on 2nd screen more button.
The data is coming into those fields, but its not getting saved.
when i do it in 4.6c its working fine, but in 4.7 its not working.
when i save it in manual posting, its getting saved.
Can you please help me to overcome this problem.
Regards,
Srikanth.
Hi This has already been developed in 4.6c and copied the same same program in 4.7. Data is getting updated in 4.6c but the data is not getting updated in 4.7.
if we use the BAPI as u said, we have to change the total program. but i dont think client will agree for that coz its working fine in 4.6c. can u please suggest any solution??
Regards,
Srikanth.
Similar Messages
-
Problem when Saving Texts using Function Module CREATE_TEXT
Hi All,
I am using Function Module CREATE_TEXT to save text in transaction XK02.
But the first character of few lines disappears in one of (Ruled) editor while that character appears in a new line in another editor.
In debug mode, I found that value of TDFORMAT is '=' in the line in which first character disappears.
while in rest its value is '*'.
I tried hardcoding the value FFORMAT in function module CREATE_TEXT with '*'. Please suggest me solution to this.
Regards,
NibhaHI.
Refer this link.
http://www. ****************/Tutorials/ABAP/MaterialLongText/info.htm
Regards.
Jay -
Error with quantity field:Datasource Creation Using Function Module method
Problem with DATASOURCE Creation using Function Module method :
I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
Let me know if my explanation is not clear enough.
Thanks in advance,
Neha.
Z table definition is as below :
MATNR MATNR CHAR 18 0 Material Number
BWKEY BWKEY CHAR 4 0 Valuation area
LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
STPRS STPRS CURR 11 2 Standard Price " Here the currency field is WAERS and table T001
PEINH PEINH DEC 5 0 Price Unit
VJSTP VJSTP CURR 11 2 Standard price in previous year
VJPEI VJPEI DEC 5 0 Price unit of previous year.
Edited by: Neha Rathi on Jan 30, 2009 3:03 PMHi,
You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
also if you want to populate it then you will have to write the code for this fields as well.
Thanks
Ajeet -
Delta Problem while extracting the data by using function module
Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
VenkatHi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya -
Problem in getting public holiday class using function module
Hi to all
I am using function module
HR_PERSON_READ_WORK_SCHEDULE.
for getting the employee's actual work schedule and public holiday class FTKLA.
But I am unable to get the correct public holiday class.
Please guide me.
How to do that.
Regards
AnubhavHi,
form build_work_schedule tables b_psp structure pdpsp
b_day_psp structure pdsppsp
b_employees structure pdpnr
using value(b_begda) like sy-datum
value(b_endda) like sy-datum
value(b_read_db) type c.
data: counter type i. "Note 495298
call function 'HR_PERSON_READ_WORK_SCHEDULE'
exporting
begin_date = b_begda
end_date = b_endda
grouping_dws = motpr "VEX Modif
grouping_attendence = moabw
grouping_substitute = mover
read_from_database = b_read_db
im_read_no_locked_records = 'X' "803380
tables
pernr_tab = b_employees
psp = b_psp
day_psp = b_day_psp
exceptions
error_in_build_psp = 1
others = 2.
read table b_employees with key error = 'X'
transporting pernr.
if sy-subrc eq 0.
read table d3000_pers with key pernr = b_employees-pernr
transporting name.
if sy-subrc eq 0.
message s582 with d3000_pers-name.
else.
message s582 with b_employees-pernr.
endif.
endif.
Hope it helps you. -
Updating liveCache Data using Function Module or ABAP program.
Is it possible to update APO Live Cache using Function Module or ABAP Program.
Will the aggregation/disaggreagation remain the same if data is modified using Function Module or ABAP Program.
Regards,
Vikasello Vikas,
-> Please click at
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
& read about 'SAP liveCache'.
As you know objects stored in liveCache in the class containers can be accessed
and manipulated only via LCA routines which are methods of LCA objects.
The registration of the LCA routines is done automatically when
the liveCache is started by the LC10, check the lcinit.log file.
The shared procedures in the LiveCache are written in C++ and shipped
to the customers as binary shared libraries(LCA-Routines) < LCA build >
together with the LiveCache. The original C++ source code of the
libraries is not generally available to the customers.
The LCA routines could be called via "/SAPAPO/OM*" ABAP functions.
-> For SAP liveCache documentation in English:
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
< -> Database Administration in CCMS: SAP liveCache -> liveCache Assistant ->
liveCache: Monitoring -> Problem Analysis-> DB Procedures >
In transaction LC10 for the LCA connection choose liveCache:Monitoring
then go to Problem Analysis -> DB Procedures=>
The system displays an overview of all database procedures loaded into
liveCache, their input and output parameters, and other details.
-> Tr. /n/SAPAPO/OM16 ( in further releases /n/sapapo/om19 ) is provided by
SAP to get information about data stored in the LiveCache. If you would
like to get your own views, you should write a special report in ABAP using
"/SAPAPO/OM"-development class functionality.
-> There are standard function modules in ABAP available to extract/change data from/in liveCache.
-> In addition to the given information => find more information at:
SCM 4.0 -> http://help.sap.com/saphelp_scm40/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 4.1 ->
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 5.0 ->
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
You can go to the Advanced Planner and Optimizer documentation from the above links < Supply Network Planning Run -> Aggregated Planning -> SNP Disaggregation Or SNP aggregation . >.
If you still have open questions on the posted topic =>
Could you please give more information on your application scenario.
Thank you and best regards, Natalia Khlopina -
Using function module PT_ARQ_REQUEST_EXECUTE to approve leave requests
I'm building a screen to approve or reject multiple leave requests using function module PT_ARQ_REQUEST_EXECUTE as the SAP standard program RPTARQAPP does, and this seems to be working fine. However, I also need to include a note from the approver which is a bit of long text that ends up in table PTREQ_NOTICE. This is something that RPTARQAPP does not do.
I cannot find any way of passing this text into PT_ARQ_REQUEST_EXECUTE. The only way I can find of doing this is to call FM PT_ARQ_REQUEST_PREPARE first (command = PREPARE_APPROVE), update the CURR_NOTICE field it sends back in structure EX_REQUEST, then pass the changed EX_REQUEST structure into FM PT_ARQ_REQUEST_CHECK (command = CHECK_APPROVE) and then call PT_ARQ_REQUEST_EXECUTE (command = EXECUTE_APPROVE). This works fine for a single leave request, but when I try to use this process to approve two leave requests the CHECK FM gives me an error on the second record with a message referring to a time conflict with the first message even though the dates on each are not the same.
I've searched and there are a few posts about these FMs, but I still can't fix this problem. Has anyone ever dealt with this situation before and found a solution?I've replaced the call to FM PT_ARQ_REQUEST_CHECK with the following and it seems to work pretty well. Though of course it will need a lot more testing.
STATICS:
request TYPE REF TO if_pt_req_request.
CALL METHOD ca_pt_req_header=>agent->get_request
EXPORTING
im_request_id = p_im_request_id
IMPORTING
ex_request = request
EXCEPTIONS
request_not_found = 1.
CALL METHOD request->set_notice
EXPORTING
IM_NOTICE = p_approver_text. -
Urgent: Problems in Generic Extraction by Function Module
Hi BW Gurus,
I am new to SDN and also new to generic extraction using function module. My requirement is to extract long text(142 char) from CRM to BW as the text is not stored in database table I used function module read_text with in another ZXXX function module copy of (RSAX_BIW_GET_DATA_SIMPLE). In my extract structure I used GUID(char,32), Langu, long text(142 char) and 2 placeholders. Text can be extracted by passing STXH table fields(Tdname, Tdid, Tdobject, Tdspars) to read_text as parameters and i also need to use CRMD_ORDERADM_H field GUID(32 char) to compare 1st 32 chars of tdname(70 char) with Guid to select Guids and loop thru this Guids and for each Guid i need to append lines of text to e_t_data but as i donot know ABAP i unable to write the code for this. Through my friends help i wrote code when i check in RSA3 it is displaying the text but when i replicate into BW and load into data target in monitor the status is red with records initially but afterwards it will be red status again with 0 from 0 records for initial load again.when i check on job logs the errors i have are:
The background job has created a job log file of 2Gb size and it is currently on a infinite loop writing entries into the SAP System Log that it cannot write to the Job log file due to Error 22 for write/read access to a file this is because of the datasource i have created. Please find my Function module and if anyone would please correct FM and send me that will be really great.I appreciate it in advance.
MY Function Module is:
FUNCTION Z_CRMORDERH_STR_TXT.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE YCRM_TEXT_STR OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
***" EXCEPTIONS NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
Tables: CRMD_ORDERADM_H, STXH.
Auxiliary Selection criteria structure
data: l_s_select type srsc_s_select.
Maximum number of lines for DB table
Statics: s_s_if type srsc_s_if_simple,
counter
s_counter_datapakid like sy-tabix,
Cursor
s_cursor type cursor.
data: i_crmtext type standard table of TLINE .
types: begin of xsreph ,
GUID type CRMD_ORDERADM_H-guid,
end of xsreph.
data: i_guid type standard table of xsreph.
data: I_TEXT type STXH-TDNAME.
data: xempl like YCRM_TEXT_STR occurs 0 with header line.
data: t_tab like dd03l-tabname.
Select ranges
ranges: l_r_guid for CRMD_ORDERADM_H-guid.
l_r_connid for sflight-connid.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
if i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
case i_dsource.
when 'yCRM_TEXT'. " for S_SREPH1
when others.
if 1 = 2. message e009(r3). endif.
this is a typical log call. Please write every error message like this
log_write 'E' "message type
'R3' "message class
'009' "message number
i_dsource "message variable 1
' '. "message variable 2
raise error_passed_to_mess_handler.
endcase.
append lines of i_t_select to s_s_if-t_select.
Fill parameter buffer for data extraction calls
s_s_if-requnr = i_requnr.
s_s_if-dsource = i_dsource.
s_s_if-maxsize = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
append lines of i_t_fields to s_s_if-t_fields.
we will do our selection based on what is in the p table for the
infoobject
else. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
if s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GUID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_GUID.
APPEND L_R_GUID.
ENDLOOP.
case i_dsource.
when 'YCRM_TEXT'. " for S_SREPH1
t_tab = 'CRMD_ORDERADM_H'.
endcase.
select GUID
from (t_tab)
into table i_guid where PROCESS_TYPE = 'ZACI' and ( OBJECT_ID < '0000000042').
select tdname from stxh into i_text where tdobject = 'TEXT'.
if sy-subrc ne 0.
message e009(r3).
this is a typical log call. Please write every error message like this
log_write 'E' "message type
'R3' "message class
'009' "message number
i_dsource "message variable 1
'No master data found'. "message variable 2
raise error_passed_to_mess_handler.
endif.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
open cursor with hold s_cursor for
select (s_s_if-t_fields) from CRMD_ORDERADM_H
where GUID in L_R_GUID .
ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
fetch next cursor s_cursor
appending corresponding fields
of table e_t_data
package size s_s_if-maxsize.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
as we are doing this only once can use the select statement.
***data: crmtext like tline occurs 0 with header line.
**data: i_crmtext type standard table of TLINE.
**data: i_guid type standard table of xsreph.
data: l_guid type THEAD-TDNAME.
data: st_guid type xsreph.
data: st_crmtext type TLINE.
data: lan type THEAD-TDSPRAS.
lan = 'E'.
loop at i_guid into st_guid.
l_guid = st_guid-guid.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'A002'
LANGUAGE = lan
NAME = l_guid
OBJECT = 'CRM_ORDERH'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
LINES = i_crmtext.
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
e_t_data-guid = l_guid.
loop at i_crmtext into st_crmtext.
move lan to e_t_data-langu.
move st_crmtext-tdline to e_t_data-description.
append e_t_data.
endif.
endloop.
clear: st_guid,l_guid.
refresh: i_crmtext.
endloop.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
endif.
ENDFUNCTION.
please Gurus as I donot know ABAP i appreciate if anyone would write a FM based on requirement and send me that will be really great this is my request. I gurantee of award points for good answers.
Regards
KishoreHi,
The statement <b>RAISE NO_MORE_DATA</b> should be active (uncommented) in your code. Otherwise, the infinte loop occurs.
See also, the Siggi's blog:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
BTW, was it your thread here:
Re: Urgent: problems in extracting Long Text
Best regards,
Eugene -
Hi. i used Function module to change Characteristic values of a sales order
hi. i used Function module to change Characteristic values of a sales order..
but sales order's Characteristic values didn't change.
And the Function module doesn't occur any log message.
please tell me wrong code, and how to solve this problem.
if i have wrong method, what data can i pass to change the characteristic values
DATA: LT_E1CUVAL TYPE TABLE OF E1CUVAL.
DATA: WA_E1CUVAL TYPE E1CUVAL.
DATA: LS_CFG_HEAD LIKE CUXT_CUCFG_S,
LS_INSTANCES LIKE CUXT_CUINS_S,
LS_VALUES LIKE CUXT_CUVAL_S,
LS_E1CUCFG LIKE E1CUCFG,
LS_E1CUINS LIKE E1CUINS,
LS_E1CUVAL LIKE E1CUVAL,
LS_PROFILE LIKE E1CUCOM,
LS_VBAP LIKE VBAP,
L_CUOBJ LIKE INOB-CUOBJ,
L_ATINN LIKE CABN-ATINN.
DATA: LT_INSTANCES LIKE CUXT_CUINS_S OCCURS 0,
LT_PART_OF LIKE CUXT_CUPRT_S OCCURS 0,
LT_VALUES LIKE CUXT_CUVAL_S OCCURS 0,
LT_VAR_KEYS LIKE CUXT_CUVK_S OCCURS 0,
LT_KSML LIKE KSML OCCURS 0 WITH HEADER LINE,
BEGIN OF LT_CLINT OCCURS 0,
CLINT LIKE KSSK-CLINT,
END OF LT_CLINT.
DATA: LT_CUIB LIKE CUIB_CUOBJ_S OCCURS 0 WITH HEADER LINE.
DATA: E_ROOT_INSTANCE TYPE CUXT_INSTANCE_NO.
DATA: EV_ROOT_PERSIST_ID TYPE IBEXTINST_DATA-EXT_INST_ID.
DATA: EV_CFG_HAS_CHANGED TYPE XFELD.
DATA: EV_HANDLE_APPL_LOG TYPE BALLOGHNDL.
DATA: L_CUOBJ_NEW TYPE CUOBJ.
DATA: L_OWNER TYPE IBXX_BUSINESS_OBJECT.
REFRESH LT_E1CUVAL.
CLEAR LS_VBAP.
SELECT SINGLE CUOBJ INTO CORRESPONDING FIELDS OF LS_VBAP
FROM VBAP WHERE VBELN = I_VBELN
AND POSNR = I_POSNR.
IF SY-SUBRC <> 0.
RAISE INSTANCE_NOT_FOUND.
ENDIF.
REFRESH LT_CUIB. CLEAR LT_CUIB.
LT_CUIB-INSTANCE = LS_VBAP-CUOBJ.
APPEND LT_CUIB.
CALL FUNCTION 'CUCB_INITIALIZER'
EXPORTING
IT_INSTANCES = LT_CUIB[].
CALL FUNCTION 'CUXI_GET_SINGLE_CONFIGURATION'
EXPORTING
I_ROOT_INSTANCE = LS_VBAP-CUOBJ
IMPORTING
E_CFG_HEAD = LS_CFG_HEAD
ES_PROFILE = LS_PROFILE
ET_RETURN = ET_RETURN
TABLES
E_TAB_INSTANCES = LT_INSTANCES
E_TAB_PART_OF = LT_PART_OF
E_TAB_VALUES = LT_VALUES
E_TAB_VAR_KEYS = LT_VAR_KEYS
EXCEPTIONS
INVALID_INSTANCE = 1
NO_ROOT_INSTANCE = 2
INSTANCE_IS_A_CLASSIFICATION = 3
INTERNAL_ERROR = 4
NO_PROFILE_FOUND = 5
INVALID_DATA = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
RAISE INSTANCE_NOT_FOUND.
WHEN 3.
RAISE INSTANCE_IS_A_CLASSIFICATION.
WHEN OTHERS.
RAISE INVALID_DATA.
ENDCASE.
ELSE.
LOOP AT LT_VALUES INTO LS_VALUES.
IF LS_VALUES-CHARC = 'SAP_MILLCA_PACKAGING'
OR LS_VALUES-CHARC = 'PD_CA_PACKING_DM'.
LS_VALUES-VALUE = '7100010'. "This is test data
MODIFY LT_VALUES FROM LS_VALUES.
ELSE.
DELETE LT_VALUES WHERE CHARC = LS_VALUES-CHARC.
ENDIF.
CLEAR LS_VALUES.
ENDLOOP.
ENDIF.
영업정보 특성 변경
CALL FUNCTION 'CUXI_SET_SINGLE_CONFIGURATION'
EXPORTING
I_CFG_HEADER = LS_CFG_HEAD
I_ROOT_INSTANCE = LS_VBAP-CUOBJ
I_PLANT =
I_STRUCTURE_EXPLOSION_DATE =
I_STRUCTURE_EXPLOSION_APPL_ID =
I_LOGSYS =
IS_PROFILE = LS_PROFILE
IV_ONLY_SINGLE_LEVEL =
IV_HANDLE_APPL_LOG =
IV_OBJECT_APPL_LOG = 'CIF'
IV_SUBOBJECT_APPL_LOG = 'T_CNFG'
IMPORTING
E_ROOT_INSTANCE = E_ROOT_INSTANCE
EV_ROOT_PERSIST_ID = EV_ROOT_PERSIST_ID
EV_CFG_HAS_CHANGED = EV_CFG_HAS_CHANGED
EV_HANDLE_APPL_LOG = EV_HANDLE_APPL_LOG
ET_RETURN = ET_RETURN
TABLES
I_TAB_INSTANCES = LT_INSTANCES
I_TAB_PART_OF = LT_PART_OF
I_TAB_VALUES = LT_VALUES
I_TAB_VAR_KEYS = LT_VAR_KEYS
I_TAB_BLOB =
EXCEPTIONS
NO_CONFIGURATION_DATA = 1
NO_ROOT_INSTANCE = 2
INVALID_INSTANCE = 3
INSTANCE_IS_A_CLASSIFICATION = 4
INTERNAL_ERROR = 5
NO_PROFILE_FOUND = 6
INVALID_DATA = 7
OTHERS = 8
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
RAISE NO_CONFIGURATION_DATA.
WHEN 3.
RAISE NO_ROOT_INSTANCE.
WHEN 3.
RAISE INVALID_INSTANCE .
WHEN 3.
RAISE INSTANCE_IS_A_CLASSIFICATION.
WHEN 3.
RAISE INTERNAL_ERROR.
WHEN OTHERS.
RAISE INVALID_DATA.
ENDCASE.
ENDIF.
COMMIT WORK.
save configuration with next commit
CLEAR: LS_INSTANCES.
READ TABLE LT_INSTANCES INTO LS_INSTANCES INDEX 1.
L_OWNER-OBJECT_TYPE = LS_INSTANCES-OBJ_TYPE.
L_OWNER-OBJECT_TYPE = 'PVS_POSVAR'.
L_OWNER-OBJECT_KEY = LS_INSTANCES-OBJ_KEY.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
ROOT_INSTANCE = LS_VBAP-CUOBJ
ROOT_OBJECT = L_OWNER
IMPORTING
NEW_INSTANCE = L_CUOBJ_NEW
EXCEPTIONS
INVALID_INSTANCE = 1
INVALID_ROOT_INSTANCE = 2
NO_CHANGES = 3
OTHERS = 4.
IF SY-SUBRC > 1 AND SY-SUBRC <> 3.
CLEAR LS_VBAP-CUOBJ.
RAISE INTERNAL_ERROR.
ELSEIF SY-SUBRC = 1.
LS_VBAP-CUOBJ = L_CUOBJ_NEW.
ENDIF.
What's wrong?
help me to solve this problem.
Thanks a lot.<b>SD_SALES_DOCUMENT_READ</b> Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
<b>SD_SALES_DOCUMENT_READ_POS</b> Reads sales document header and item material: tables VBAK, VBAP-MATNR
<b>SD_DOCUMENT_PARTNER_READ</b> partner information including address. Calls SD_PARTNER_READ
<b>SD_PARTNER_READ</b> all the partners information and addresses
<b>SD_DETERMINE_CONTRACT_TYPE</b>
In: at least VBAK-VBELN
Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
<b>SD_SALES_DOCUMENT_COPY</b>
<b>RV_ORDER_FLOW_INFORMATION</b> Reads sales document flow of sales document after delivery and billing
SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
SD_PACKING_PRINT_VIEW
SD_DELIVERY_VIEW Data collection for printing
called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
regards
vinod -
Error occurred while loading Generic extraction using Function module
Hi all
I'm trying to do INIT for Generic Extractor using Function module, but i'm getting error as "Error occurred in the source system"
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Job terminated in source system --> Request set to red
Message no. RSM078
Can u help plz....Hi Vishnu
This are the Job log details i found in source system...Can u tell what whould be the problem?
Message
Job started
Step 001 started (program SBIE0001, variant &0000000002861, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZYFI102
RLOGSYS =
REQUNR = REQU_D9Y4CZDQULRIHRRVU33KOLQZO
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 0 *
abap/heap_area_total.......... 10737418240 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 3000000 *
ztta/roll_extension........... 2000000000 *
No authorization for Acct type D
Job cancelled after system exception ERROR_MESSAGE
Thanks in advance
Edited by: MohanDP on Feb 25, 2011 11:58 AM
Edited by: MohanDP on Feb 25, 2011 12:01 PM -
Error message when using function module HRIQ_TESTRESULTS_CREATE
Hi,
I need your help, I'm trying to use function module HRIQ_TESTRESULTS_CREATE to create external test results, I've used this function before without subscores, now I need to create subscores, but I get the message: "Grading scale UBID applies".
The test type EXAM_UB_ING has assigned the UBID academic scale, which has a range from 1 to 677. Test type EXAM_UB_ING has 3 subtests (grammar, listening and reading) which also have the UBID academic scale assigned.
I think this isn't a customizing problem because I can create test results with subscores using the PIQST00 transaction, the error message happens just when using the function module.
I'm using this import parameters:
STUDENT:
PL: 01
OT: ST
OBJID: Student ID
TESTRESULTS_HEADER:
ISSUEDATE 08.02.2010
VALIDDATE 30.04.2010
TEST_GUID
TESTEO 50000269
TRANSEO 00000000
TESTTYPE EXAM_UB_ING
SESSIONID T1
SESSIONYEAR 2010
ENTRYDATE 08.02.2010
TESTPASSFAIL
TESTTOTRES 458
TESTSCALE_ID
TOTALPERCENT1 0,00
TOTALPERCENT2 0,00
ENTRYMODE
SUBTY
Table TESTRESULTS_SUBSCORES:
SUBTESTID GRAMMAR
SUBTESTTRES GRAMMAR
SUBT 203
SUBTESTID READING
SUBTESTTRES READING
SUBT 120
Does anybody know which could be the error? Or any other function module which I can use? (with HRIQ_TESTRESULTS_PROCESS_DATA I get the same error message).
Thanks in advance!
AraceliAraceli,
I just noticed. You are populating SUBTESTSCALE_ID in subtest result structure.That's the reason it's throwing this error. it is trying to match Scale ID from test with value in sub test result scale ID.
Prabhat Singh -
Generic Data Extraction From SAP R/3 to BI server using Function Module
Hi,
I want step by step procedure for Generic Extraction from SAP R/3 application to BI application
using Functional module.
If any body have any Document or any PPT then please reply and post it in forum, i will give point for them.
Thanks & Regards
Subhasis Panplease go thr this link
[SAP BI Generic Extraction Using a Function Module|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/sap%20bi%20generic%20extraction%20using%20a%20function%20module.pdf]
[Generic Data Extraction Using Function Module |Re: Generic Data Extraction Using Function Module; -
Generic Extraction - Using Function Modules
Hi Friends,
Can you pl let me know the step by step process for creating generic extraction using function module?
Thanks in Advance.
Regards,
Ari.
Please search the forum before posting a thread
Edited by: Pravender on Aug 5, 2010 7:31 PMHi,
Plz find this doc.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33.
And go this link...
http://www.sdn.sap.com/irj/scn/advancedsearch?query=genericextractionwithfunctionmadule
Regards.....KP
Edited by: kundan.sap on Aug 5, 2010 4:35 PM -
ITSM Service Request - Assigning Categories - Using Function Module
Hi,
We are trying to create an ITSM service request ticket from ECC, based on a workflow and its logic. I am calling a remote function module which will contain the logic as explained below.
I am creating a CRM ITSM service request(incident) ticket using function module CRM_ICSS_SRVREQ_CREATE.
The ticket is created but some of the fields that I need to populate in the transaction do not have an interface in this function module. I want to specify the category 1, category 2 and category 3.
I tried function module CRM_ORDER_MAINTAIN but I am unable to find the interface where I can populate this particular data. The component used here is btcategories/categories.
Can anyone suggest where this particular data needs to be populated.
Thanks,
AbdullahHi Abdulla
What parameter did you set for "Reported By" and "Message Processor" in the FM CRM_ICSS_SRVREQ_CREATE. I am having a lot of problems regarding this. Can you please help?
Thanks
Saumyendra -
Delta with Generic Extractor using function module
Hi,
I have created an extractor using function module and it work fine (mode FULL)
It's an extractor based on the FM RSAX_BIW_GET_DATA_SIMPLE.
In TCODE RSO2, I have specified a delta field (AEDAT).
In table ROOSOURCE, this extractor is defined by :
DELTA = AIE
EXMETHOD = F1
When I extract data in Init mode, there is no problem. But delta don't extract any entries.
When I trace with TCODE ST01, in Init mode the function module is executed but in delta mode, there is no trace of any use of this function module.
I don't know how to do to make this extractor work fine in delta mode.Hi Pascal,
The same function module i have used and succesffuly doing delta using it. So it works for both full & delta.
How ur testing it and where are you testing it for delta.
Do the delta testing through BI end. Set the
As u have already set the delta field., now Follow below steps:
1. First set the safety interval upper limit to -1, so that it will extract the delta data of 1 day back records also.
2. Please make sure wether the delta records are available or not in r/3, if there is no records to be fetched in for delta then u will not be able to track out wether delta is working or not.
3. Now do the init from BI end first. Delta initialization without data transfer. - It will give u green status with 1 dummmy record.
4. Now do the delta. It will extract the delta records.
Before that make sure that if any selection your giving in Infopackage should be met out by these delta records.
Thanks
Dipika
Maybe you are looking for
-
Hello every body we can use html in swing components is there any way to set css on html which we use in side the swing components. zerocool
-
I have a Curve 8310 running v4.5 OS. I was hiding\rearranging some of the icons\folders on the home screen, and suddenly all the icons were missing. Pressing the <menu> button does absolutely nothing from the home screen. I have tried pulling the
-
Hi folks, I'm having problem email pictures as attachments to windows users. My email sends the picture embedded in the email and apparently not as an attachment. Therefore, the photostop can't download it for printing. Is there a way to change that?
-
Hi, What is purpose of taking AD backup ? Only for restore the Objects or apart from anything ? Normally if my Domain Controller got crashed, we have an option to seize the role after seizing will do metadata cleanup and will place new domain control
-
Hi, got one computer at home an on at work.As my music is on my itunes at home and my ical is at work,how can i synchronise my ical from the work computer if iphone does not accept two itunes accounts...dont want to loose lot of time by sending my ic