Problem in PRD to display check box parameter on selection screen

hi ,
i had one problem, i created one report which will show customer advances, for this report i created one selection screen, i transport req to QAS and PRD it shows fine. after that i need to add one more check box to that report selection screen. i transport reqt to QAS and PRD, in QAS it is woking fine but in PRD i am not able to see the check box which i was enterd. transport was perfect. i am saw the report coding in PRD that has the Check box statement. but it not comming,
1, why the selection screen is not showing that check box parameter ?
2, i had 19 selection fields is their any restriction to display the selection screen ?
please try to solve it for me,
thanq,
rajesh.k

Hello Rajesh,
First check the Log of your TR. whether it is transported properly without any error or with error.
again delete your Checkbox statement and write code again then try to transport again.
there is no any limitation to provide option on selection screen. you can give as per your requirement.
Regards,
Sujeet

Similar Messages

Check Box On Standrad Selection-screen

Hi Friends
I am working on HR ABAP .I added 4 check boxes On Standrad Selection-screen. Its working on Development but its not working on production.can anyone suggest how its happend.

Hello,
A few questions.
- what exactly is not working in production?
- do the check boxes appear at all?
- did the changes get recorded on a change request and transported?
- was the transport successful?
- do the checkboxes 'work' in the QA envirionment?
Regards
Greg Kern

Handling Check Boxes in the selection screen

Hi All,
I have defined 3 Check Boxes in the selection screen and one box will be ticked as 'X" by default.
I need to put restriction so that only any one should be selected as 'X' whenever user wish to select.
Hence any time, when user selects a box, other two should be unchecked.
How to put this kind of control?
Regards
Pavan

I think you should go for 'Radiobutton'
But if U want check box then
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF cb_option1 = 'X'.
      CLEAR cb_option2.
      MODIFY SCREEN.
    ELSEIF cb_option2 = 'X'.
      CLEAR cb_option1.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

How to get a check box on the selection screen

Hi all
can any body tell me how to get a check box on the selection screen

parameter: pa_check as checkbox.
To define the input field of a parameter as a checkbox, you use the following syntax:
PARAMETERS ...... AS CHECKBOX ......
Parameter is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
REPORT DEMO.
PARAMETERS: A AS CHECKBOX,
B AS CHECKBOX DEFAULT 'X'.

Dynamic check box creation in selection screen

Hello,
I am trying to put up some check boxes dynamically in a selection screen. The number: of check boxes required and the 'checkbox label text' is to be retrieved from a database table. I have retrieved all these values in AT SELECTION-SCREEN OUTPUT event. But, I dont know how to create check box parameters using these dynamic values. Please help..

hi Giffin,
Create a program with name 'Z_13317_DYN_CHKBOX' and paste the following code in it. Also make ensure that an include with name 'Z_13317_DYN_INCL' is not existing earlier because this program will be overwritten each and everytime.
Z_13317_DYN_CHKBOX will take an integer as an input. After giving input, click on the button on selection screen.
Suppose, if you have given 3 as input and if you have clicked the button, then 3 checkboxes will be generated on your selection screen.
REPORT Z_13317_DYN_CHKBOX.
types :begin of t_itab1,
 line(72),
 end of t_itab1.
data: incl type table of t_itab1 with header line.
parameters: p_tab type i,
 p_frst type c no-display.
selection-screen begin of line.
selection-screen: pushbutton 2(20) but1 user-command cli1.
selection-screen end of line.
include z_13317_dyn_incl if found.
initialization.
at selection-screen output.
if p_frst = ' '.
 p_frst = 'X'.
 perform crt_dyn_incl.
endif.
at selection-screen.
case sy-ucomm.
 when 'CLI1'.
 perform crt_dyn_incl.
endcase.
*& Form crt_dyn_incl
* text
form crt_dyn_incl .
perform populate_incl.
perform del_incl.
insert report 'Z_13317_DYN_INCL' from incl.
commit work.
submit z_13317_dyn_chkbox via selection-screen with p_frst = p_frst.
endform. " crt_dyn_incl
*& Form del_incl
* text
form del_incl .
call function 'RS_DELETE_PROGRAM'
 exporting
 program = 'Z_13317_DYN_INCL'
 suppress_checks = 'X'
 suppress_popup = 'X'
 with_cua = ' '
 with_documentation = ' '
 with_dynpro = 'X'
 with_includes = ' '
 with_textpool = ' '
 with_variants = ' '
if sy-subrc <> 0.
endif.
endform. " del_incl
*& Form populate_incl
* text
form populate_incl .
data: v_cnt type n.
do p_tab times.
 v_cnt = v_cnt + 1.
 incl-line = 'parameters: '.
 concatenate incl-line 'p_chk' v_cnt into incl-line.
 concatenate incl-line 'as checkbox.' into incl-line separated by space.
 append incl.
 clear incl.
enddo.
endform. " populate_incl
Regards,
Sailaja.

How to create check boxes dynamically in selection screen

Hi Experts,
I have a requirement of creating dynamic check boxes based on the number of records that are retrieved from a database table.
Can you please suggest me how to achieve it.
Regards
RP.

Hey RP,
Try this way.
REPORT ztest_program .
DATA: it_data TYPE TABLE OF t001.
DATA:check    TYPE char3.
DATA:sy_index TYPE char2.
DEFINE checkbox.
parameters:&1 as checkbox.
END-OF-DEFINITION.
CHECKbox:c01,c02,c03,c04,c05,c06,c07,c08,c09,c10,
         c11,c12,c13,c14,c15,c16,c17,c18,c19,c20,
         c21,c22,c23,c24,c25,c26,c27,c28,c29,c30,
         c31,c32,c33,c34,c35,c36,c37,c38,c39,c40.
AT SELECTION-SCREEN OUTPUT.
DESCRIBE TABLE it_data LINES sy-tfill.
sy-tfill = 39. "This will be changed based on the itab records. I just hardcoded the value
sy_index = 1.
LOOP AT SCREEN.
    CONCATENATE 'C' sy_index INTO check.
    IF screen-name = check.
      IF sy_index GT sy-tfill.
        screen-active = '0'.
        MODIFY SCREEN.
        sy_index = sy_index + 1.
        CONTINUE.
      ENDIF.
      sy_index = sy_index + 1.
    ENDIF.
ENDLOOP.
Thanks
Venkat.O

Check box in ALV selection screen

Hi to all
I like to know how to create a checkbox in the input screen of an ALV.

What do you mean by ALV check box selection screen?
ALV and selection screen check box( you are mixing two cases in your Question).
You need use the Function moduel in the user command to get the updated data.
in fieldcatalog you have to use INPUT = 'X' and EDIT = 'X' for the columns which ever you want edit.
GET_GLOBALS_FROM_SLVC_FULLSCR
follow the sample code.
REPORT ZTEST_ALV_CHECK MESSAGE-ID ZZ .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
L_LAYOUT TYPE SLIS_LAYOUT_ALV,
X_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
CHK(1),
color(4),
END OF ITAB.
SELECT VBELN
POSNR
FROM VBAP
UP TO 20 ROWS
INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'CHK'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
X_FIELDCAT-INPUT = 'X'.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-CHECKBOX = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-HOTSPOT = 'X'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_LAYOUT-info_fieldname = 'COLOR'.
*L_LAYOUT-ZEBRA = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
I_CALLBACK_PF_STATUS_SET = 'STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form STATUS
text
-->P_EXTAB text
FORM STATUS USING P_EXTAB TYPE SLIS_T_EXTAB.
Pf status
SET PF-STATUS 'STATUS'.
ENDFORM. " STATUS
*& Form USER_COMMAND
text
-->R_UCOMM text
-->RS_SELFIELD text
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
DATA: GD_REPID LIKE SY-REPID, "Exists
REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA .
ENDIF.
loop at itab where chk = 'X'.
itab-color = 'C300'.
modify itab index sy-tabix transporting color.
endloop.
RS_SELFIELD-refresh = 'X'.
break-point.
ENDFORM. "USER_COMMAND
Regards
Vijay Babu Dudla

How to get System status Check Boxes into Query selection screen

Dear experts,
Pleas help in knowing how to get System status Check Boxes into quick view query (SQVI), selectionscreen.
Regards
Jogeswara Rao
Edited by: K Jogeswara Rao on Jul 6, 2010 7:26 PM

Problem solved through other Forum
(Checkboxes not possible, some alternative solution to my requirement found)

How to display check box in atable control

hi
here is my requirement
how can i display check box in table control and also when i check that check box it has to dispaly one pop up screen with the records of table control row
points will be rewarded
Thanks&Regards
Nagesh.Paruchuri

Hi,
See this code for how to display check box in atable control
*---- Table declaration.
TABLES: KNA1.
CONTROLS TC1 TYPE TABLEVIEW USING SCREEN 200.
CONTROLS TC2 TYPE TABLEVIEW USING SCREEN 300.
*---- Data declaration.
DATA:OKCODE LIKE SY-UCOMM.
DATA:V_KNA1 LIKE KNA1.
*DATA:ERROR TYPE C.
*---- Internal Table declaration.
DATA:BEGIN OF IT_TAB OCCURS 0,
 CHK,
 VBELN TYPE VBELN_VA,
 KUNNR TYPE KUNAG,
 ERDAT TYPE ERDAT,
 AUDAT TYPE AUDAT,
 VBTYP TYPE VBTYP,
 END OF IT_TAB.
DATA:BEGIN OF IT_TAB1 OCCURS 0,
 VBELN TYPE VBELN_VA,
 POSNR TYPE POSNR_VA,
 MATNR TYPE MATNR,
 MATWA TYPE MATWA,
 PMATN TYPE PMATN,
 END OF IT_TAB1.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OKCODE = SY-UCOMM.
CASE OKCODE.
 WHEN 'DISP' OR SPACE.
 SELECT *
 FROM VBAK
 INTO CORRESPONDING FIELDS OF TABLE IT_TAB
 WHERE KUNNR = KNA1-KUNNR.
 IF SY-SUBRC <> 0.
 MESSAGE 'No sales document exists'(001) TYPE 'I'.
 ENDIF.
 LEAVE TO SCREEN 200.
 CLEAR OKCODE.
*--- To leave Transaction
 WHEN 'BACK' .
 LEAVE PROGRAM.
 CLEAR OKCODE.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module validate_kunnr INPUT
MODULE VALIDATE_KUNNR INPUT.
V_KNA1 = KNA1.
SELECT SINGLE *
 FROM KNA1
 WHERE KUNNR = KNA1-KUNNR.
*-----Process error condition
IF SY-SUBRC <> 0.
 CLEAR KNA1.
 KNA1-KUNNR = V_KNA1-KUNNR.
 CASE OKCODE..
 WHEN 'BACK' OR 'EXIT' .
 LEAVE PROGRAM.
 ENDCASE.
 MESSAGE 'Customer Does Not Exist'(002) TYPE 'I'.
 LEAVE TO SCREEN 100.
ENDIF.
ENDMODULE. " validate_kunnr INPUT
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'PF'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
MODULE USER_COMMAND_0200 INPUT.
CASE OKCODE.
 WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
 LEAVE TO SCREEN 100.
 CLEAR OKCODE.
 CLEAR IT_TAB1.
 WHEN 'DISP' .
 CLEAR OKCODE.
 READ TABLE IT_TAB WITH KEY CHK = 'X'.
 IF SY-SUBRC = 0.
 SELECT VBELN POSNR MATNR MATWA PMATN
 FROM VBAP
 INTO TABLE IT_TAB1
 WHERE VBELN = IT_TAB-VBELN.
 IF SY-SUBRC = 0.
 SORT IT_TAB.
 DESCRIBE TABLE IT_TAB LINES TC1-LINES.
 LEAVE TO SCREEN 300.
 ELSE.
 MESSAGE E016(YBHV).
 ENDIF.
 ELSE.
 MESSAGE 'Please select one record' TYPE 'I'.
 ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Module STATUS_0200 OUTPUT
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'PF3'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module USER_C.OMMAND_0300 INPUT
 text
MODULE USER_COMMAND_0300 INPUT.
SET PF-STATUS 'PF3'.
CASE OKCODE.
 WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
 CLEAR OKCODE.
 LEAVE TO SCREEN 200.
ENDCASE.
ENDMODULE. " USER_COMMAND_0300 INPUT
*& Module modify INPUT
MODULE MODIFY INPUT.
MODIFY IT_TAB INDEX TC1-CURRENT_LINE.
ENDMODULE. " modify INPUT
*& Module okcode OUTPUT
 text
MODULE OKCODE OUTPUT.
CLEAR OKCODE.
ENDMODULE. " okcode OUTPUT
Reward Pointsa If usefull
Regards
Fareedas

Displaying Check boxes in the Report Output

hi Folks,
           I need to dispay check boxes for every line item in my report output, the user can select particular line item by clicking the check box. and if the user click one button on the report, the corresponding dunning form should be generated. How can i acheive this. is displaying check boxes possible in normal reports or we need to go for ALV. please help me regarding this.
               thnx,
               santosh.

We can do it with the normal report also.Create a charecter field and while the field to the screnn
write :/ field as check box.
this will create acheck box in the output

Re- Single click in the check box ensure to select all check boxes

Hi All,
I have an issue to notify the urgency of the cart to the buyer while creating the cart.For that scenario we have a check box in the Basic data of shopping cart.I added the check box in the basic data. Now the quote check box is available for all the line items.
The requestor can select any check box in any line items,so whenever he selects the check box- automatically all the check box should get selected , if any of the check box get deselected then imediatelely all the check box in different line items also should get deselected.

Hi Batchu,
Thanks for your reply, See if you add any custom field it will come one by one in the basic data section. Adding one more check box doesnot work for this case.
Moreover the problem is change to any particular line item can be captured in DOC_CHANGE_BADI but i cannot bring the same change to all line items (ie) If 3 rd line item check box is marked then immediately rest of the line item also should get marked.
In the case of DOC_CHECK_BADI to identify the line on which the change happens is tough.
SO thats is the problem for me to bring the logic in the code.
Please if any one come across similar kind of issue please give your suggestion.
Thanks,
Sibi

To add a check box in the login screen

Hi,
I need to put a check box in the login screen of CRM below the LOGON button with a message :'I agree with the terms and condition of the System'.
Please help.

See: Improve PDFs: Create interactive PDF checklists

Uncheck one check box when we select other check boxes

Hi All,
This might be very simple question for experts. I just want to unselect one check box (this check box is to select 'ALL' and this will be selected by default) when we select any other check box (for individual categories) on same region. Can any one please suggest me how to implement this?
Thanks in advance.
Regards,
Hari

Hi Shijesh,
Thanks for you reply.
I'm using two items (check boxs), like P1_ALL and P1_TEST. I want to unselect P1_ALL when we select P1_TEST check box.Both the check boxes contains single value in List of values. For this I wrote script like
<script type="text/javascript">
function uncheckAll(pthis)
elm = document.getElementsByName('P1_ALL');
if(pthis.checked)
elm.checked = false;
</script>
And in HTML form element attribute of P1_TEST, I have 'onclick=uncheckAll(this)'. But for some reason when I select 'P1_TEST', P1_ALL check box not getting un-selected.
I would be grateful if you suggest what needs to correct in this one.
Regards,
Hari

How to create Option Boxes IN A SELECTION SCREEN

How to create Option Boxes IN A SELECTION SCREEN.
Thanks!

Hi Rajesh,
The following explanation gives clear picture of what is mean of check box and radio button with coding.....................
CHECK BOX :
AS CHECKBOX [USER-COMMAND fcode]
Effect:
This addition specifies that the input field in the first position of the selection screen is displayed as a checkbox, with the corresponding description next to it on the right. The checkbox is selected if the value of para is "X" or r "x". Otherwise, it is not selected.
The parameter must be created with the type c and length 1. An explicit length len is not permitted. If the addition TYPE is used, this can only be followed by the generic type c or a non-generic data type of type c and length 1.
The addition USER-COMMAND can be used to assign a function code fcode to the parameter. The function code fcode must be directly specified and may have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects the checkbox on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Notes
If the TYPE addition is used to make a reference to a data type in the ABAP Dictionary of type CHAR and length 1, and for which t the valid values in the domain are defined as "X" and " ", the parameter is automatically displayed as a checkbox on the selection screen.
If the addition USER-COMMAND is specified without the addition AS CHECKBOX, and the parameter is of type c with length 1, it is also displayed as a checkbox.
The addition USER-COMMAND can, for example, be used for screen modifications with the addition MODIF ID (see example).
Coding :
PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
 p2(10) TYPE c,
 p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p4(10) TYPE c MODIF ID bl2,
 p5(10) TYPE c MODIF ID bl2,
 p6(10) TYPE c MODIF ID bl2.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF show_all <> 'X' AND
 screen-group1 = 'BL2'.
 screen-active = '0'.
 ENDIF.
 MODIFY SCREEN.
ENDLOOP.
RADIO BUTTON COMMAND :
RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type c and length 1.
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
CODING :
tables : mkpf,mseg,ekko.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1,
 c as checkbox.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X' USER-COMMAND UC1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
write :/ p_werks,
 / s_ebeln.
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN .
IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Let me knwo if any doubts.
Reward with points if it helpful
Regards,
Vijay

Fetching data from a table & displaying it as checkbox in selection screen

I have a database table which contains report name & report description as fields.based on the number of rows of data present in the table i have to display check box for each entry & the corresponding controls in the selection-screen.
I got answers like:
1.Declaring the checkboxes & hiding the same in runtime using user-command,which is not needed...
2.Declaring the checkbox in screen painter using function code & calling the same,where i need a clear explanation...
Is there any other method other than this plz let me know...
Reply is most urgent...

Hi Vijay...
The selection screen should look like...
cb1 -
variant1 -
icb1 -
date1 -
time1
cb2 -
variant2 -
icb2 -
date2 -
time2
where...
cb1 - checkbox which indicates the first report(YRTEST) in the table...
variant1 - textbox for variant which has a help,on clicking should display all the variants of YRTEST report...
icb1 - checkbox which indicates the immediate background processing...
date1 - date on which the job should be scheduled...
time1 - time on which the job should be scheduled...
If icb1 is clicked then date1 & time1 should not be allowed to enter & vice-versa...
cb2 - checkbox which indicates the second report(YRTEST1) in the table...
variant2 - textbox for variant which has a help,on clicking should display all the variants of YRTEST1 report...
icb2 - checkbox which indicates the immediate background processing...
date2 - date on which the job should be scheduled...
time2 - time on which the job should be scheduled...
If icb2 is clicked then date2 & time2 should not be allowed to enter & vice-versa...
Its not like what u said...(Based on user entered data fetch the data of report(variant,date,time) and you can submit the data to background job as incase of single record by looping the data)
Because we have only ReportName,ReportDescription as fields in the table & not variant,date,time...The variant,date,time are all entered in the selection-screen only from which the background job is scheduled...
I hope the requirement is more clearer...

Problem in PRD to display check box parameter on selection screen

Similar Messages

Maybe you are looking for