Problem in Print Out of Excise register RG1
Dear all,
We have a business scenario as follows:
1.Production Order Confirmation-101, 261 for receipt
2. Scrap Receipt-262.
For Scrap Sales:
The entry in RG1 should be Scrap receipt (262) and then despatch of scrap i.e issue(601).
During updation we do the following:
We receive scrap in RG1 register through RMA classification. Then we issue the scrap in RG1 register through IDH Classification. The register also get updated and extracted successfully.
Problem: While printing of RG1 register there is no entry for Receipt (262) and issue(601) of scrap.
Regards,
Can anyone pls suggest how to capture Scrap sale in RG1.
Similar Messages
-
Print out of Excise invoice other movements.
Dear All,
How can we take print out of Excise invoice other movements.what is the T-code & what is the program & form name.if is there any configration setting then tell please tell me the steps.
Thanks & regards
PavanHi,
check J1IP T code
thanks
suresh -
Problem in Print Out of ALV report
Dear All..
I am trying to take print out of an ALV report. there are 36 columns in my report. when i try to take print out, warning appears which says system cannot print the last 277 columns of report.
i have tried using different formats for printer like :
Format Description
X_PAPER ABAP/4 list: Default list formatting
X_SPOOLERR ABAP list: Spooler problem report
ZX_65_284 65 Rows and 285 Columns
X_65_255 ABAP/4 list: At least 65 rows with a maximum number of c
X_65_200 ABAP list: at least 65 lines with 200 columns (not for a
X_58_170 ABAP/4 list: At least 58 rows by 170 columns
X_65_132 ABAP list: At least 65 rows by 132 columns
X_90_120 ABAP list: At least 90 rows by 120 columns
X_44_120 ABAP/4 list: At least 44 rows by 120 columns
X_65_80 ABAP/4 list: At least 65 rows by 80 columns
but every time the same message appears even on A3 size paper..
i am using REUSE_ALV_GRID_DISPLAY to display ALV.
Please help to to take out prints(can be in condensed mode) so that all columns appear on the print out..HI sujeet,
Thanks for ur response. i had already checked the printer settings.. i think there is no problem with this. Can u Please suggest something else. thanks
Hiii jyojit..
Thanks for reply. I had already checked the said check box in spool admin. but the problem still exists. Please suggest something to get rid of the problem. -
Problem in print out of Dynamic ALV
Hi ,
I am using dynamic ALV to address a requirement. The ALV is working fine and the output is also coming corretly, even in spool.
But if the width of dynamic table exceeds a limit, then nothing is coming in the print out.
If anyone has faced similar problem or knows how to tackle this problem, please advise what can be done here.
Thanks,
SonalHi,
Can you try to increase field with to maximun as per your requirement.
Regards,
Sai -
Hi all
I have checked the posts on this issue
My all the out put determination setting of output type J1I0 ok, even in VP01 i have set the default printer
even then the i am not getting the printout of Excise Invoice
in J1IP after executing status is NO OUT PUT TYPE
Please advice
Thanks
Edited by: Ashok ku. on Mar 30, 2010 6:53 AM
Any suggestion seniors
Edited by: Ashok ku. on Mar 30, 2010 6:58 AM
Edited by: Ashok ku. on Mar 30, 2010 5:36 PM
Edited by: Ashok ku. on Mar 31, 2010 11:22 AMHi Lakshmi Narasimhan
Thanks for your reply
As suggest by you I have to Maintain the out put type for the commercial invoice , so is it necessary to maintain the out put type of Commercial invoice to get the printout of Excise Invoice ?
As the Excise invoice has its own different Billing doc type i.e. JEX (Sap standard) and the out put type J1i0 is assigned to it,
to which the print program J_1IEXCP and form J_1I_EXC_INVOICE is assigned , so why at all we need to maintain the out put type for the commercial invoice ?
Please correct me If I am wrong .
waiting for response from all senior .
Thanks
Ashok
Edited by: Ashok ku. on Apr 5, 2010
Senior please throw some light on this issue , it will really be helpful for all the community -
Problem in print out with English characters (THANGSAN font)
Save Our Environment. Save Yourself.
Hi Experts!!
I have created a smartform and print program which should actually print some Thai characters and English characters too. I created a smartstyle and have some 10 paragraph formats and are all have THANGSAN font. So, I am printing all the thai and english characters in THANGSAN font only.
When print preview is seen, the output is very fine, but when being printed, the thai characters are appearing fine but the english characters' font is being changed to somehting else (courier or arial). Why is this happening so? Because of this, all the output is being merged and looking very weird.
The smartform is created in EN and is translated to all languages. All user has logged on to SAP in EN language.
Can somebody please help me out with whether the problem is with THANGSAN or the printer?
P.S. The smartform is actually similar to the standard script Z_RVINVOICE01 in which only THANGSAN is used.
- I'm not an environmentalist. I'm an Earth warrior.Save Our Environment. Save Yourself.
Can anybody please help me out?
Thanks a lot.
- I'm not an environmentalist. I'm an Earth warrior. -
hi,
i m modifying rg1 . in this register i have to convert quantity into no.
using this formula.
qty = menge * ( umren / umrez). ( umren & umrez in table MARM)
when i do this it give me run time error
PACKED FIELD CONTAIN INCORRECT BCD FORMAT
can anyone solve this problem.
Thanks
DineshHi Dinesh,
I am facing the same problem...
If u have got any solution...Plz share
Thanks in advance
Swathi -
Problem with printing out of sap to printerserver 2008 connected printer
Hi there,
one of our customers is using a SAP ECC 6 System on a Windwos 2003 Server and is printing over a windows 2008 Printerserver to the printers.
We now have the issue, that there is a problem with lpd. The printer is reach- and pingable from SAP system, also on os-level the printer-server is reachable via telnet on port 515. But within printing, we get the following eror
Status: Incorrect (Failed to connect to LPD)
Job status: Completed
Area: Data transfer
Error: LPD response format invalid
Any idea?
thx for help
OttoHello Otto,
It seems the problem is in the connection the LPD on the destination host.
I would check the connection. Please, see note 10758 that can be helpful for this case.
Regards,
Blanca -
Problems getting print-out of Sub-contracting challan
Hi all,
we,ve had real problem getting the print0out of sub contracting challan.
System wouldn't show any print-preview of the sub contracting challan.
but at assign forms and procedures in customizing of Inv management, at 51IF FOR SC challan, the system does show a print-preview of the sc challan form.
but, after creating a SC challan and trying to view the print-preview of sc chalan, the system would neither show print-preview nor get a print-pout of the sc chalan.
please do help in this regard,
thanks and regards
Nabilsolve with other thread
-
IPhoto 4.0.3 color and Brightness problems when printing out photos.
In addition to my previous question, I forgot to mention that opening the iPhoto 4 JPEG photos in Photoshop also import as dark and reddish tinted. Help?
This color management thing gets pretty complicated. To get the best results you have to synch monitor calibration with camera and print settings.
There is also the difference between additive (light)and subtractive (pigment- ink) color. The monitor starts with black - 0%, adds red, green and blue to a pixel (picture element) and gets white 100%. A printer starts with white (paper) and when all the colors are added gets black - this is different then using true black ink.
So by their nature the display on the monitor and print are quite different. Typically monitors are set to maximum brightness and contrast. A photo appears light and less than saturated. Printing at BEST PHOTO lays on lots of ink dpi. So the print is going to be saturated and darker than the monitor image - for most users.
Professionals go to great effort to calibrate and control the effect of printing versus display. For us users it takes experimenting and experience to be able to judge the difference between display and output (print).
I have found that using Adobe RGB settings the photo as seen in PhotoShop is very close to the high quality print PhotoShop produces. That is why I do most adjustments in PhotoShop and use iPhoto for cropping and rotating pictures for the web or email.
The key to getting the best print in iPhoto is your printers color management settings.
Peter -
Hi All,
We need to take Excise Invoice (J1IV) print out. we are using ECC 6.O version, what is the Tcode for taking the excise invoice print out.
Thanks and Regards
ChandruHi All,
Thanks for your updates,
I have tested with Tcode J1IP to take print out of Excise invoice with out put type J1I0 and flagged inculde printed excise invoice.
After clicking print invoice (F8), i'm unable to take the print out. No pages displayed.
Please help me to resolve the problem.
Thanks and Regards
Chandru -
hi!
I have a little problem with print out.
I want to print out like this:
about two cm space between each number.
I have 4 columns and 4 rows
for(){
System.out.println(a+" "+b+" "+ d+" "+e);
}How do I write?I think that you mean *\t*. :)
So the code would become:
System.out.println(a + "\t\t" + b + "\t\t" + d + "\t\t" + e);{code}
OR
{code}System.out.printf("%d\t\t%d\t\t%d\t\t%d", a, b, d, e);{code} -
How to print out all files in a specified directory
Now, I have some problem which prints out the entire content of all of the .txt files in a specified directory.
what method i can use?
Can anyone give me some examples?
Many ThanksRead the API for java.io.File, in particular the list and listFiles methods, and java.io.FilenameFilter.
-
Problem with printing from Acrobat Reader XI
SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
Does anyone know what can be the problem?No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there. I copied them by adding -COPY before .joboptions in the name. Now they appeared in Printing Preferences with the -COPY added.
I tested a print from Word (using File / Print), but was not prompted for the filename or location. I checked my entire system and couldn't find the PDF file anywhere. I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
After several days and hours, I gave up and installed Acrobat X on the W7 computer. I can still use Acrobat XI on the W8 computer. So be it!
Thanks anyway for your attempts to help. -
I cannot print out a webpage when viewed with firefox. I've removed and reloaded firefox. Same issue. Printer program drop down indicates printer is offline. I bring up the same page with IE and no problem. Prints out no problem.
Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer
Maybe you are looking for
-
Hi, I'm have created a .war file that contains an html page and a JApplet. When I deploy the .war file and connect to the server, the html page is found. but, I get an exception that the applet class can not be found. when I use the assembly tool tha
-
ColdFusion 10 mod_jk won't compile for Apache HTTPD 2.4.6
Making all in apache-2.0 make[1]: Entering directory `./src/connector-source/native/apache-2.0' ./apr/build-1/libtool --silent --mode=compile gcc -std=gnu99 -I./httpd/include -DHAVE_CONFIG_H -DUSE_APACHE_MD5 -I ../common -I /include -I /include/unix
-
How do I get this rollover and click effect ?
Hi, I have found a template which I rather do like. I was wondering if someone knew the coding to make some of the effects used possible. The aforementioned template - http://www.templatemonster.com/flash-templates/33686.html The effects: 1. When you
-
Move OEM central repository to a new database
Hi, We want to move the OEM central repository to a different machine, we would like to migrate the data from original database to the new database. What's the best way to do that and how to re-configure OMS to use the new database? Thanks!
-
How does the invoke event for an Air iOS app work?
Hi, If my app gets invoked for the first time the invoke event isn't fired. If the app gets invoked for the second time it is working. How to get the event.arguments[0] every time the app gets opened/invoked? NativeApplication.nativeApplication.addEv