Problem in Print preview of smart forms in different servers.

Print preview is different in different systems(development and Quality) for the same smartform, though everything is same.
both are seen on print preview of locl printer, and I have checked the settings of locl in spad also and this also has no difference, there is absolutely no difference in smartform ,style paragraph format or character format.
Can anyone please let me know what could be the problem.
Help is appreciated.

Hi,
check this link it might solve ur problem.
Re: Smartforms Print Preview Problem
it might be the same issue which u r facing with..
Regards,
Sana.
reward poitns if found helpful..

Similar Messages

  • Print preview of smart form

    Hi all,
    how to view the print preview of a smart form and how to debug the smart form
    Thank You

    SMARTFORM-> execute->execute->pass values if require to import & table parameters ->execute-> on the pop up window give Printer name as LP01 and press print preview.
    For debussing -
    1. write BREAK POINT in the code window.
    2. Put a break point on the call function in the driver program
    3. put a brak point in the generated Function module.
    Refer this link too -
    Re: smartforms
    Regards,
    Amit

  • Problem in printing Border in Smart Form in DMP printer

    Hi ,
    Im facing the same issue in my Smartform . When the user prints through ALV it prints the border ,
    But if we use the same printer for Smartform it does not print the borders in Dot Matrix .
    I did increase the width from 15 TW to 30 TW but even then the Table Border is not printing .
    Can someone please help me with the same

    Hi Juhi,
    I believe, Dot Matrix printer is for pre-printed Docs, so except charaters in the form, nothing will be printed, where as in case of laser printer, A4 paper is nt a pre-printed format.
    I think this might be the case in ur issue.
    Sujatha

  • How to print bullet in smart form

    Hi Experts,
    I have a requirement in smart form  where different points of texts should come under a bullet.
    Can you please tell  me how to print bullet in smart form.
    Note : I have to use Standard text   
    Thanks in advance
    Bikas

    hi
    good
    We can create bullets in smartforms.
    For this change the editor to text editor and then
    goto insert->characters->SAP Symbols and select the
    symbol you want.
    This may help your requirement.
    You cannot see the bullets in print preview, it'll
    appear only on a hard copy.
    reward point if helpful.
    thanks
    mrutyun^

  • Problems with Print Preview in PO.

    Hi Experts, I need your help!!
    I have problems with print preview in purchase order, if the PO has moviments ( GR or Invoice ) I cant see the form of PO in Print Preview...Anybody has idea about happen?
    I can see the form before i make the movements after i cant see anymore..This is right?
    There is the document explain the problem
    [http://www.easy-share.com/1903543233/PO_PROBLEM1.doc]
    Thanks

    Hi,
    What is the particular error message which prevented you from print preview?  I have not seen such case before in many systems.
    Cheers,
    HT

  • Use of NACE after creating print program n smart form

    Wat's d purpose of NACE?I hav created my own print program n smart form according to my own requirement.If NACE is necessary 4 my smart from.How can i use NACE i mean navigation steps.
    Please help me out.Its urgent.
    Thanks & Regards,
    Santhosh.

    Hi Santhosh,
    Nace is for message control settings. Say if u want to trigger a Smartform or an Idoc or any other customized program u can do the message control settings.
    Say at the time of Sales Order creation or updation u want to trigger a Smartform, then u have to follow the following steps:
    Goto NACE
    Select application V1 and then click Output Type.
    create a new Output type or copy the existing one abd save it with new name
    then in Processing Routine Mention the driver program name and in Form routine mention the main subroutine name.
    In Smartform mention your SMartform name and also the layout if u have ceated.
    Again go to NACE and Select application V1 and press Procedures.
    here out of the many procedures u have to select the right one and attach your Output Type to it.
    You can also create a condition record..Say if u want to trigger this Smartforms for Sales Order of particular type.
    Hope this helps.
    Reward Points if useful.
    Thanks.

  • I had a problem with print preview of billing document.

    HI all,
    I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
    For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
    If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
    I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve  it.

    hi,
    for both the output types , r u using same sapscript or smartform?
    if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
    and if differect sapscript or smartform then you should not get such problem.
    you can check the sapscript or smartfrom in TNAPR table.

  • How to Printe Graphics in Smart-Forms

    Guys,
    Need your help…
    Is it possible to print graph in smart form???
    If yes, if you have any document, please pass it to me…
    Dhiraj

    Hi Ram,
    Go through this hope u can understand.
    How to Upload graphics (IMAGE) to your Sapscript?
    Command in your Sapscript
    /: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
    These are the steps to be followed for uploading graphics in R/3 system 
    1.   First save the file as BMP 
    2.   Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and 
          make it Zoom as 100% and save as *.TIFF 
    3.   Open SE38 and execute program RSTXLDMC
    4.   Give your TIFF file path name 
    5.   Select Bcol (for Color) 
    6.   TEXT ID will be ZHEX-MACRO-*. 
    7.   Inplace of * write your own logo name (ZCOMPANYLOGO) 
    8.   Execute the program 
    9.   Now Goto SE71 create your ZFORM 
    10. Create logo window 
    11. Goto text element of logo window 
    or
    In 4.6x :-
    1.  Goto SE71 Change the mode to GRAPHICAL 
    2.  Choose the Graph Tabstrips
    3.  Now type in some name for the LOGO WINDOW 
    4.  Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP 
    5.  The code will be written automatically. You just need to drag and drop wherever you want
         the graphics to be. 
    /:   INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
    Reward points if help ful.
    http://www.sap-img.com/ts001.htm
    Sorry i think for Scripts ..
    better to go for above post . it definetly works
    Thanks
    Naveen khan
    Message was edited by:
            Pattan Naveen

  • Problem in print preview

    Hi all,
    I am working on sap scripts. i have problem in print preview,
    1. I have 2 pages in my layout ,but only one page is displyed in the preview, iam able to view 2 pages in other test program , i have compared all the atrubutes  with test program , it's same for both.
    2.  Iam getting  border lines for all the windows on the layout which i don't want  on the page, when printed
    It would be appreciated if  anybody could  give me suggestion or sollution.
    Regards,
    Sre.
    Title Edited by: Alvaro Tejada Galindo on Jan 11, 2008 4:13 PM

    Hi sayak,
    Thanks for your reply, I have followed as u suggested but it's not working. still iam getting only single page .
    I think in the second page we give next page as the same i.e page2 as if there is no other page after page2.
    please suggest me in other way.
    Regards,
    Sre.

  • Passing printer name to smart form

    Hi,
    How to pass more than four characters printer name to smart form function  module name. Please  help me. I will give points.
    Thanks.

    Hi,
        Thanks for your reply but there I can pass maximum four character printer name but my case printer name contains 12 characters. If I pass 12 characters printer name it is considering first four characters and it is displaying printer name is not found. So please tell me how to pass more than four characters printer name.
    Thanks.

  • Can not get print preview of Adobe forms

    Hi Gurus,
    I am not able to see the print preview of adobe forms, and when i click on print preview, i get this error code..
    Exception       SYSTEM_ERROR
    Message ID:          FPRUNX                     Message number:           001
    I don't see any logs from SM21, and so I don't think this some code error... I configured ADS as per the document, and all the configuration tests are passed except this print preview...
    Any suggestions?
    Regards,
    Nrisimhanadh

    Hi
    Please check this parameter
    OUTPUT_OPTIONS-TDNOPREV
    hope this helps
    Regards
    Aakash

  • Smart forms in different languages

    Hi all,
    i have an issue
    I hav to convert my smart form in 8 different languages.
    i know se63 but i dont want to use it as i have to maintain texts manually in different languages in se63.
    is there any FM or code with which i can convert my smart form in different languages.
    my smart form is originally made in EN language n i hav to convert it to german , italian , french , spanish etc.
    please tell me any SAP note no that would be really helpful.

    Hello,
    if you do to want to use se63, you have 2 way:
    1. use modul text ( see Transaction smartforms, 3°option on the screen)
    2. Use a standard text (so10 transaction)
    I mean that on smartforms you have to use only this 2 kind of text and, of corse, translate it.
    regards

  • Problem in multiple printing in the Smart Forms

    Hi Experts,
    From the driver program I am passing Internal table with multiple records for employee,
    But the smart forms is printing only single form for the employee.
    Could you please suggest what need to be done in order to print multiple forms for employee.
    Regards,
    IFF

    IF sy-tabix EQ 1 .------>only for first loop it will give dialog box
          CALL FUNCTION fm_name
            EXPORTING
              user_settings      = 'X'
              vbeln              = it_vbeln-vbeln
              pdf                = r2
              rbiclear           = c3
            IMPORTING
              job_output_options = job_out
              einv               = einv.
        ELSE.
               c_par-no_dialog = 'X'.----
    > if u set this then u will not get dialog box again and again
           out_opt-tdnoprev = 'X'.
            out_opt-tddest = job_out-tddest.
            out_opt-tdprinter = job_out-tdprinter.
          CALL FUNCTION fm_name
            EXPORTING
              control_parameters = c_par
              output_options     = out_opt
              user_settings      = space
              vbeln              = it_vbeln-vbeln
              pdf                = r2
              rbiclear           = c3
            IMPORTING
              job_output_options = job_out
              einv               = einv.
        ENDIF.

  • Slow down printing speed for Smart Forms

    Hi,
    Is there any command (etc.) to slow down the printing speed of an Hp laserjet when printing a smart forms?
    I need that because when I print that smart form to fast I run into print out quality problems.
    Many Thanks

    hi,
    take print out in a dot matrix printer instead of your laser printer without changing any settings.
    Coz i tried this once, i was successfull. But, the printout will be very slow.
    regards,
    kool.

  • Problem while print preview purchase order for new document type

    Dear Experts,
    I have got the problem as below and need your helps.
    I created a new purchasing document type and then created a new PO with this document type. PO was created successfully in the system. I added a message to print out PO with the followed parameters as NEU output type, 1.Print Out medium , VN partner function, dispatch time is 3 ( Send with application own transaction).
    Then, I clicked Print Preview button on the ME23n screen, the error message bellowed was shown
    "The combination of  document type
    and Purchasing organization is invalid.
    please check the document and change it.
    unable to print the form"
    I really want to print the PO with new purchasing document type on the existed purchasing organization, Could you please help me identify the problem and solution for this issue?
    Appreciate for your responses.
    Thanks,
    Tinh Vo Trung
    Edited by: Tinh Vo Trung on Sep 23, 2011 7:43 AM

    Dear All,
    Many thanks for your responses.
    Regarding to maintain the condition record in MN04, I already done for that but the problem was not resolved.
    Could you please come with the other posible causes and solutions for this issue?
    Dear Bijay Kumar Barik,
    Please let me know why we check the new document type in Program, Routine and From of NEU output type?
    p/s: I compared the version the program, FORM and routine of NEU output type and found that there is no the differences btw DEV server and QAs server. However, An PO created susscessfully in QAs server, but the error was happend in DEV server.
    Could you please come with the other posible causes and solutions for this issue?
    Thanks,
    Tinh Vo Trung

Maybe you are looking for