Problem in printer please help
I am using HP k209a, When I started my printer with or without connected to PC, all the lights (power light, warning light, plain A4, Ph.. ... plain A4, Photo A4, Photo 10x15 lights) are glowing (not blinking) and nothing happens
Hi @BrijRahul,
Welcome to the HP Forums!
I understand that all the lights are glowing on your HP Deskjet Ink Advantage k209a. I am sorry to hear this, but happy to help you with this issue!
I would recommend this guide, The HP Printer Won't Turn On or Respond When the Power Button is Pressed, as it deals with the fact that your printer is not responding once it is turned on.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!
Similar Messages
-
Problem with printing - Please help, need to be able to print!!
I am having a bit of a nightmare trying to get printing to work in OS X Tiger and would really appreciate some feedback.
I need to connect 2 network printers. Have managed to install one of them with a driver on the Xerox website but when I go to print a page from Firefox I get the following appear on the first page (followed by several blank pages):
%!PS-Adobe-3.0
%RBINumCopies: 1
%%Pages: (atend)
%APLDSCEncoding: UTFS
%%Title:
I also get the same problem using a generic driver on either of the printers. If someone can tell me where I am going wrong I would really appreciate it!!Postscript is the page description language that OS X printing is based on. A postscript printer is one that has a postscript interpreter built-in. Non-postscript printers use some other page description language, such as HP's PCL language.
The Workcentre uses PCL (postscript is a paid option). So does the PSC. You'll need a PCL "CUPS" driver. I'd install hpijs (a 3 part install) from:
http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs
For the PSC, I'd try the PSC 2175 driver,
for the Workcentre, try the HP Color LJ 5000 driver.
A guide for Windows printing:
http://www.ifelix.co.uk/tech/3015.html -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?
You may want to look at this about using recovery mode to restore your iPad.
http://support.apple.com/kb/ht4097 -
It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it to the timeline, it won't move. I have never had this problem before. Please help.
P.S. I have tried other effects including transitions and it still won't let me drag.Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia -
Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...
your reed switch for the monitor is defective, it thinks youve shut the lid when you havent
mechanical fault , contact Apple for service and parts replacement. -
I want to ask how to downgrade ios 7 to 6.1.3, because a lot of problems ios 7. please help
I want to ask how to downgrade ios 6.1.3 to 7, because a lot of problems ios 7. please help
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
-
Error getting license. License server communication problem: E_ADEPT_NO_TOKEN. Please help
I try to download my ebooks on my laptop but receive the onscreen message, Error getting license, License server commucication problem: E_ADEPT_NO_TOKEN. Please help?
It means, the URLLink.ACSM file is corrupted. Please contact the book store and ask them to check whether the configuration in the server side is correct for that book.
One of the simple setting in the server which can case this issue is, setting the book for loan in server and providing the purchase option in the book store or vise verse.
Hope this solves your problem. -
i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..
From http://support.apple.com/kb/HT4060 :
The fastest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
iPods need less power to charge them (their wall charger is half the power of the iPad's, 5W as opposed to 10W), so are more likely to charge via USB -
Problems printing - please help!
Hi,
I have an Epson R800 that I am using with Aperture 1.1. My printouts don't match the colors on my LCD screen. I am using the proper ICC profiles (for premium glossy photo epson paper). I have two questions:
1. Is there any way to print out the same image multiple times on a contact sheet with different gamma settings?
2. when I select the Print settings, it keeps defaulting to the
"standard paper setting" (instead of premium glossy, which i keep having to reselect). I have several presets, but it keeps defaulting to the STANDARD setting. It also defaults to the color controls setting under COLOR MANAGE (I keep turning that off)....please help.
one more quick question, I paid a lot of money for this program, where do I actually get tech support from? I would like a phone number with a live operator....:-DNow try fiddling with the saturation and other settings. Sometimes it is virtually impossible to have the print look exactly like what is on the monitor, so you have to fiddle the various settings until you get the print you want. So much depends on the calibration of the monitor, and the lighting in the room, and the kind of paper you use, and many other factors. The acid test is the print. You have to fiddle until you get the print you want.
If your colors are too light, you could start by tweaking the exposure, or the saturation. You may have to have a too rich image on the screen in order to produce the right image in the print.
Recently, I needed an 11x14 of a superb 8x10 print, and I had to have the 11x14 done by a specialty lab, because the Epson R800 won't go to 11x14. So I took in the print and the image file, and my friend was able to produce an 11x14 precisely like my 8x10 print. He had to do quite a bit of fiddling to accomplish it. It was by no means simply a matter of matching my print on screen. He had to work to get his system to produce precisely the colors and exposure, etc. etc. that I had in my print.
You may want to go through a major calibration effort in order to bring your screen image closer to your print. -
SAPscript Output Problem - Very Urgent - Please help
Hi,
I am having the following problem with SAPscript.
In the Main Window, I have instructions to the printer in the ZPL2 language (For Zebra Printer).
There are also several variables, which are highlighted in Gray and enclosed in the&.
There are also several elements all of them empty except for the one where this code is.
Now, I received this program to modify in terms of code and the output.
IF you have never done any work with Zebra Printing, the way it is done is that you create a label using the Zebra BarOne or Zebra Designer program, then output it to an itf file, upload it into a standard text as .itf and copy the uploaded contents to the main window. When printing to a Zebra printer, the Zebra printer will read the instructions and will print the output.
Here is the problem: The config for the output type is correct.
When doing a printing test from SAPscript, I get the right output and the Zebra printer is able to print it.
However, the real process for this task will go through MB02. There, if I create a spool request using the proper method (select output type and etc.), it will go the spool. However, if I print preview or output (doesnt work with the Zebra printer, so I have to output to the Laser printer), it will output the following (none of the following includes any of the ZPL2 code/instructions. Instead, it seams to print the variables contents with the field name next to it This isnt whats its the Main window!!!)
http://img244.imageshack.us/img244/6915/66052475zk2.jpg
Please help. I have debugged but dont know what to do and cant find anything wrong.
This is very urgent. Any help will be useful.
Thanks,
JohnOk, maybe I have confused others in regards to the issue as well.
We expect this label to be output from a Zebra Printer.
When output through Sapscripts printing test, the preview from the spool shows the ZPL2 code in small font (non readible if a created a screenshot) and if sent to the Zebra Printer, it prints the label correctly.
When output through MB02, the preview from the spool shows the code that I have attached to the 1st post in this thread. If I try to output to the Zebra Printer, nothing happens because the ZPL2 instructions are not even in the preview and therefore, the Zebra printer recieves no instructions. I should not have mentioned the laser printer, because it has nothing to do with this issue.
I hope that this makes the issue a little more clear and understandable. Please help.
Here is the ZPL2 coding before uploading to standard text (only difference is that once uploaded, the '/' characters are removed.) However, I believe that the problem may lie in the print program and how it compiles but I debugged and haven't really seen where it comes from:
/:NEW-PAGE
/ ^XA
/ DFNEW-RE-1FS
/ ^PRC
/ LH0,0FS
/ ^LL1830
/ ^MD0
/ ^MNY
/ LH0,0FS
/ FO244,854A0N,55,46CI13FRFB154,1,0,LFN999^FS
/ FO819,698A0N,55,46CI13FRFN998FS
/ FO245,477A0N,55,46CI13FRFB755,1,0,RFN997^FS
/ FO389,926A0N,55,46CI13FRFB654,1,0,RFN996^FS
/ BY3,3.0FO42,1072B3N,N,152,N,YFRFN995FS
/ FO276,1258A0N,55,46CI13FRFN995FS
/ FO484,774A0N,55,46CI13FRFN994FS
/ FO817,774A0N,55,46CI13FRFN993FS
/ FO611,556A0N,55,46CI13FRFN992FS
/ FO245,556A0N,55,46CI13FRFN991FS
/ FO397,117A0N,55,46CI13FRFN990FS
/ FO245,405A0N,55,46CI13FRFB880,1,0,RFN989^FS
/ FO244,698A0N,55,46CI13FRFN988FS
/ FO629,998A0N,55,46CI13FRFN987FS
/ FO244,623A0N,52,42CI13FRFN986FS
/ FO397,261A0N,55,46CI13FRFB404,1,0,RFN985^FS
/ FO819,854A0N,55,46CI13FRFN984FS
/ FO725,554A0N,55,46CI13FRFN983FS
/ FO397,189A0N,55,42CI13FRFB695,1,0,RFN982^FS
/ FO397,333A0N,55,42CI13FRFN981FS
/ FO638,333A0N,55,42CI13FRFN980FS
/ FO391,21A0N,63,63CI13FRFB433,1,0,CFN979^FS
/ FO36,698A0N,55,46CI13FR
/ FDWBS:FS
/ FO37,405A0N,55,46CI13FR
/ FDMATL:FS
/ FO37,478A0N,62,44CI13FR
/ FDDESC:FS
/ FO554,698A0N,55,46CI13FR
/ FDSUPPLIER:FS
/ FO32,625A0N,55,46CI13FR
/ FDTEXT:FS
/ FO35,1258A0N,55,46CI13FR
/ FDBATCH NO:FS
/ FO770,775A0N,63,51CI13FR
/ FD/FS
/ FO32,854A0N,55,46CI13FR
/ FDESHM:FS
/ FO37,556A0N,55,46CI13FR
/ FDQTY:FS
/ FO32,998A0N,55,46CI13FR
/ FDSAP MATERIAL DOC NO:FS
/ FO525,333A0N,55,46CI13FR
/ FDofFS
/ FO556,854A0N,55,46CI13FR
/ FDINSPECT:FS
/ FO32,926A0N,55,46CI13FR
/ FDUNLOADING:FS
/ FO37,117A0N,55,46CI13FR
/ FDSTOCK TYPE:FS
/ FO32,774A0N,55,46CI13FR
/ FDPURCHASE ORDER:FS
/ FO37,188A0N,55,46CI13FR
/ FDDELIVER TO:FS
/ FO37,260A0N,55,46CI13FR
/ FDSTORAGE LOC:FS
/ FO37,332A0N,55,46CI13FR
/ FDCONTAINERS:FS
/ FO1,1359GB1217,0,6^FS
/ FO594,1359GB0,474,6^FS
/ ^XZ
/:NEW-PAGE
/ ^XA
/ ^XFNEW-RE-1.ZPL
/ FN999FD&ATWRT_HAZAMAT(6)&^FS
/ FN998FD&EKKO-LIFNR&^FS
/ FN997FD&MABDR-MAKTX&^FS
/ FN996FD&MSEG-ABLAD&^FS
/ FN995FD&MSEG-CHARG&^FS
/ FN994FD&MSEG-EBELN&^FS
/ FN993FD&MSEG-EBELP&^FS
/ FN992FD&MSEG-ERFME&^FS
/ FN991FD&MSEG-ERFMG&^FS
/ FN990FD&MSEG-INSMK(1)&^FS
/ FN989FD&MSEG-MATNR&^FS
/ FN988FD&MSEG-MAT_PSPNR&^FS
/ FN987FD&MSEG-MBLNR&^FS
/ FN986FD&MSEG-SGTXT(40)&^FS
/ FN985FD&MSEG-UMLGO&^FS
/ FN984FD&QALS-PRUEFLOS&^FS
/ FN983FD&V_BACKORDER&^FS
/ FN982FD&V_NAME3&^FS
/ FN981FD&WS_CNTR&^FS
/ FN980FD&WS_CON&^FS
/ FN979FD&WS_HEADER& &^FS
/ ^PQ1,0,1,N
/ ^XZ
/ ^FX End of job -
Hi.... Apple Support Communities...
I used Apple MacBook Air 2014 (13 inch) series with OS X Yosemite 10.10.2 version...
And I have a printer of Canon LBP2900...
My problem is that, I can't connect my Canon LBP2900 printer with my new OS X Yosemite 10.10.2 version.
My previous OS X Mavericks is working well with my Canon LBP2900 printer...
But when I upgrade it to OS X Yosemite 10.10.2 version, my printer is not working...
Anybody please help me how can i connect OS X Yosemite 10.10.2 version with my Canon LBP2900 printer....
Thanking you.... Your suggestion in this regards is highly appriciate...Your first step would be to upgrade to Snow Leopard (10.6). To do that, you would need to purchase the Snow Leopard DVD. Following that you could determine how much further you could upgrade.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
Kernel Panic When Printing -- Please Help
I used to have the Kernel Panic problem all the time because I stupidly did not keep my computer on a hard surface. Once I started leaving it directly on my desk, the kernel panic subsided.
Now it's back. Every time I try to print something, a few pages print, followed by Kernel Panic (my screen darkens with symbol of the power button and error message tells me to restart my computer). I have 23.1 GB left on my hard drive (out of 120). I don't think this is the problem but I figured I'd mention it anyways.
Last time this happened, I had all other applications closed. The only thing open was the printing que and kernel panic still happened.
Please, please help me. I just started school and I really need to be able to print things and not have my computer shut off every time. Thanks so much!
My printer is an HP Photosmart C6380 all-in-one.Thank you so much for your help! I appreciate it more than you know! Here's actually my most recent three kernel panic attacks (with the most recent at the very bottom). If you could diagnose what's going on with my computer, that would be so amazing! Any advice you have... my apple care recently expired so I am feeling a little hopeless :(!
Thank you!!!
Sat Aug 15 16:38:37 2009
panic(cpu 0 caller 0x001A49CB): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x00dd1000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x049a659c, ECX: 0x041850d8, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x2528be48, ESI: 0x049a659c, EDI: 0x00000001
EFL: 0x00010046, EIP: 0x0013389a, CS: 0x00000008, DS: 0x25280010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2528bc68 : 0x128d0d (0x3cc65c 0x2528bc8c 0x131f95 0x0)
0x2528bca8 : 0x1a49cb (0x3d2a94 0x0 0xe 0x3d22b8)
0x2528bdb8 : 0x19b3a4 (0x2528bdc8 0x8ae9bc 0xe 0x3a50048)
0x2528be48 : 0x134ed0 (0x49a659c 0x0 0x2528be68 0x428e21c)
0x2528be68 : 0x14045f (0x49a659c 0x0 0x2528be8c 0x202)
0x2528be88 : 0x1385c9 (0x428e218 0x45fab8 0x0 0x0)
0x2528bed8 : 0x13879c (0x428e210 0x0 0x0 0x138d6b)
0x2528bf08 : 0x195f2e (0x2528bf44 0x0 0x0 0x0)
0x2528bfc8 : 0x19b81e (0x40ff080 0x0 0x206 0x40ff080) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfff94a8
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Mon Aug 24 11:46:25 2009
panic(cpu 0 caller 0x00194E0C): pmap_enter: null pv_list!
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x25023838 : 0x128d0d (0x3cc65c 0x2502385c 0x131f95 0x0)
0x25023878 : 0x194e0c (0x3cfcbc 0x3fe0000 0x0 0x16deb34)
0x25023918 : 0x160c66 (0x4b3700 0x3fe0000 0x0 0x160c2)
0x25023a68 : 0x1a471c (0x1435ed8 0x3fe0000 0x0 0x1)
0x25023b78 : 0x19b3a4 (0x25023b88 0x48cfc3c 0xe 0x190048)
0x25023d08 : 0x18320d (0x48cfc3c 0x25023d58 0x8000 0x0)
0x25023d78 : 0x156009 (0x48cfc3c 0x5265bc0 0x8000 0x3000001)
0x25023db8 : 0x12b4ee (0x5265ba0 0x59456a4 0x0 0x0)
0x25023df8 : 0x124b17 (0x5265b00 0x0 0x2c 0x25023edc)
0x25023f08 : 0x195f2e (0x25023f44 0x0 0x0 0x0)
0x25023fc8 : 0x19b81e (0x5bf9658 0x0 0x19e0b5 0x5bf9658) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffb298
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Tue Aug 25 09:13:35 2009
panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x0000000c, CR3: 0x00df6000, CR4: 0x000006e0
EAX: 0x251e3b78, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x01716e98
CR2: 0x0000000c, EBP: 0x251e3bc8, ESI: 0x00000000, EDI: 0x042e1ef4
EFL: 0x00010282, EIP: 0x00163e4a, CS: 0x00000008, DS: 0x251e0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x251e39e8 : 0x128d0d (0x3cc65c 0x251e3a0c 0x131f95 0x0)
0x251e3a28 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8)
0x251e3b38 : 0x19b3a4 (0x251e3b48 0x42e1ef4 0xe 0x140048)
0x251e3bc8 : 0x16eeb2 (0x412c000 0x42e1ef4 0x200d000 0x0)
0x251e3d08 : 0x18320d (0x412c000 0x251e3d58 0x8000 0x0)
0x251e3d78 : 0x156009 (0x412c000 0x4644cc0 0x8000 0x3000001)
0x251e3db8 : 0x12b4ee (0x4644ca0 0x45eeea4 0x0 0x0)
0x251e3df8 : 0x124b17 (0x4644c00 0x0 0x2c 0x251e3edc)
0x251e3f08 : 0x195f2e (0x251e3f44 0x0 0x0 0x0)
0x251e3fc8 : 0x19b81e (0x413dc9c 0x0 0x19e0b5 0x41c3718) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffb448
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386 -
I'm trying to print a multiple page document from my ipad using an AirPrint printer. Only the first page is printing. Please help. The printer works correctly with my desktop and laptop.
What version of iOS are you using? Some people were having this problem before, and it was fixed when they updated to iOS 5.
-
Nokia 5130 problems...please help!
hiya i recently updated my Nokia 5130 over-the-air and had no problems so far. then i have downloaded the latest internet settings fro my phone via my network operator. no problem there. but whenever i surf the net or use 3rd-party chat service the internet shuts down and just stops working? why is this? is there a way to use my internet (to surf or chat) seamlessly? (n.b. i have an unlimited internet option on my network account).
please help!you need to call them again the message comes via text its a configuration setting ,then you save this message so call them again
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520
Maybe you are looking for
-
i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?
-
Help!! Putting a sprite on a path?
I'm looking for a similar program to this, except it needs to be a circle which gets bigger as it goes along a Sprite Path and forms a pattern. The path will start at the top left and finish at the bottom right with circles being created as the Sprit
-
My iphone 4 has been stolen. What should I do?
What should I do so the thief can not use it? And is there any way to have it back? The iphone was bought in Europe but it was stolen nor in Europe nor in US.
-
I was able to log the peer-to-peer BBM chat history for some users after set the Disable BlackBerry Messenger Wireless Synchronization IT policy rule to No, but realised that the Group Chat History is not logged, is that true? or any setting can cap
-
Why do they keep re-ticking themselves?
Hello! I just want my iTunes to show music, films, tv programmes and apps. So I go to Preferences, un-tick podcasts and the rest but when I close iTunes and relaunch it, they appear again! What should I do?