Problem in printing the notification long text in tocde iw53.

Hi All,
When i try to print the notification long text through tcode "iw53", i get the following message
"The margins of section 1 are set outside the printable area. Do you want to continue?"
and if i give yes then, only the right side of the page gets printed.
This happens only in the Quality and Production system, whereas in development system its working fine, so i think there is no problem with the printer settings.
Do anyone have an idea why this happens only in quality and production system, and what might be the solution to overcome this?
Thanks & Regards,
Haritha.

Hi ,
Please check your settings on machine which is set for printer .
Most printers cannot print all the way to the edge of the paper, because of physical limitations in the way that the printer handles paper.
If you set your document margins or section margins closer to the edge of the paper than your printer is capable of printing
1.Note the section number that is indicated in the error message.
2.On the Edit menu, click Go To.
3.In the Go to what box, click Section.
4.In the Enter section number box, type the number of the section that appeared in the error message, click Go To, and then click Close.
5.On the File menu, click Page Setup.
6.On the Margins tab, click OK. Word displays the following message:
One or more margins are set outside the printable area of the page. Choose the Fix button to have Word set the page margins within the appropriate range.
7.Click Fix. This increases any margin in the nonprintable region to the minimum margin setting.
Note If you are familiar with your printer's nonprintable regions, you can manually increase the Top, Bottom, Left, and Right margins to the minimum that is required.
8.Click OK to close the Page Setup dialog box.
regards
Deepak.

Similar Messages

Notification long text

Dear All,
The notification long text filled in 3rd party software and it passing through XI. Through function module I am updating the long text in the IW22. This long text is filled 132 characters only but I need to fill more than 132 characters through this integration. where I can do the changes.
Thanks and regards,
Krish...

Hi Krish,
It would be great if you can share the solution. How did you solve this problem? I am currently facing the same issue.
Thanks,
Mittal

I have a Problem in print the long description data through EDI.

I have a Problem in print the long description data through EDI:Actually we want to print the long description data through EDI, but it not handling our huge long description data. Here is the example of that>We can print the first two lines into EDI output, but it is failing to print the below text:
EPSON, TM-U590 Series: Reliable 88 column slip printer. Operator friendly dot matrix impact printing. Ideal for hotel, bank, restaurant and many more applications . Includes: Printer, Black ribbon & a Connect-It Interface. Power Supply & interface cable sold separately. All printers are RoHS compliant & have a standard 1 year depot warranty. 
 -------------------------------------Failing to print this lines------------------------------------------------------------------
COLORS: Epson Cool White (ECW) Only Click links below for helpful Information <table border="0" bordercolor="" style="" width="100%" cellpadding="5" cellspacing="5"><tr><td><CENTER><A HREF="www.sample.com"f.2605" target="_blank">Spec Sheet</a></CENTER></td><td><CENTER><A HREF="www.sample.com"f.2606" target="_blank">MSRP Price List</a></CENTER></td><TD><CENTER><A HREF="www.sample.com"f.2868" target="_blank">Product Information Guide</a></CENTER></TD></TR><TR><td>Warranty Information</td></tr><Tr><td><CENTER><A HREF="www.sample.com"f.2554" target="_blank">Depot Warranty</a></CENTER></td><td><CENTER><A HREF="www.sample.com"f.2555" target="_blank">Spare In the Air Warranty</a></CENTER></td><td></td></tr></table> 
Please provide some useful thoughts on this EDI issue.
Thanks
Ameer

Try using the FM:
ENQUE_READ2
Passing the follwing values:
GNAME --> VBAK (Sales Order header table)
GARG --> The lock argument
 (This will be a combination of client number anb Sales Order No.
 Eg: '3001210000054' where the first three digit i,e 300 is the client No
 and 1210000054 is the sales order no.)
Regards,
Firoz.

Search in notification long text

Hi,
Is there a SAP built-in way to search in the PM notification long text field?
e.g. From a list, with TREX, etc.?
I use ECC 6.0
Thanks
François

Hi Everyone,
I have the same requirement regarding Trex Functioan for Notification.We are already implemented the same for Equipment & Functaional Location,but In case of notifications & ordrer, I am not getiing the Class for business objects, which is required in config.
Please suggest me the same.
Regards,
GP

Maintain notification long text in IW21

Hi Expert,
I have one requirement as follows:
In TCode IW21: Create PM Notification, client wants Notification Long should appear as a Template from Standard Text (TCode: SO10).
Now I want to fetch this Std. Text which is maintained in TCode SO10 and show it at Notification Long Text while creating Notification using TCode: IW21.
Please guide me how to do this functionality using any User Exit or any Enhancement available in SAP.
Thanks,
Jay.

Hi,
Create SAP standard text
DATA: IT_TEXTS type standard table of TLINE,
      wa_texts like line of it_texts,
      THEAD    TYPE THEAD.
**Populate text table
wa_texts-tdformat = '*'. "new line
wa_texts-tdline = 'First line of text'.
append wa_texts to it_texts.
clear: wa_texts.
wa_texts-tdformat = '='. "continuation line
wa_texts-tdline = 'still first section of text'.
append wa_texts to it_texts.
clear: wa_texts.
**Also need to Populate THEAD details which can be gathered from the Text Identification Details
      CALL FUNCTION 'CREATE_TEXT'
           EXPORTING
                FID         = THEAD-TDID
                FLANGUAGE   = THEAD-TDSPRAS
                FNAME       = THEAD-TDNAME
                FOBJECT     = THEAD-TDOBJECT
              SAVE_DIRECT = 'X'
              FFORMAT     = '*'
           TABLES
                FLINES      = IT_TEXTS
           EXCEPTIONS
                NO_INIT     = 1
                NO_SAVE     = 2
                OTHERS      = 3.
Thanks,
Abhijit

Quality Notification long text

Hi All,
I want to export long Text data for some 500 Quality Notifications.
Presently I am going to T-Code QM11 and copying every quality notification long text and pasting it in excel.
Is there any alternative way to perform this operation.
Because extracting the data for so many notifications will take an ample lot of time.
Thanks in advance.

Hi Abhshek,
You need to develop such reports and these are simple.
We have given several such Longtext reports in the form of smartforms to our customers. See this example report.
Jogeswara Rao K

Problem in Printing the ALV list

Hi,
I have one problem with printing the ALV list. While printing the ALV list(thro Print Icon on application Tool bar) ,Fist page of my print out contains some other inforamtion.
inforamtions included two tables
first table contains Sort Criteria, Ascdg, Descnd, Subtotal columns.
And second table contains Data statistics , number of
columns.
But from Second page onwards , my alv list printed correctly .
How can i avoid the First page inforamtion and
what is the Reason of coming like this?
Thanks,
Neptune.M

I assume you are using function module Reuse_alv_grid_display or reuse_alv_list_display for ALV.
If this is the case, there is a parameter called IS_PRINT that you need to supply while calling the function module.
you can for exapmle declare
data:
printstruc type SLIS_PRINT_ALV.
printstruc-NO_PRINT_LISTINFOS = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_PRINT = printstruc
There are many other flags in is_print structures that you can use to manipulate the printing.
Cheers!

Problem with Printing the Billing date...

Hi Experts...
Here im facing the problem in printing the billing date.
The scenario is as follows.
The posting date of Billing is 10.10.2008
The document date of Billing is also 10.10.2008.
At the time of printing the Billing document it is taking another date otherthan 10.10.2008,where it should be 10.10.2008.
What modifications should i do to rectify the problem.
Please advice.
Regards,
Y P.

Prasad,
Ask your ABAPer do debug and find out what date (Table-Field) is used in the Invoice Output program. You will know the reason and if you think that the date being used is incorrect, you can ask your ABAPer to change it to VBRK-FKDAT which is the billing date.
Chandan

User exit to make the field 'Long text for UD' as mandatory

Hi Gurus,
My requiremen is that while doing UD, I need to make the field 'Long text for UD' as mandatory for the rejected materials
pls suggest.
Thanks
Ganesh

Hi,
U can use the badi ME_PROCESS_PO_CUST methid PO PROCESS_ITEM. In this u have both doc type and line item data and using this u can through the error message to make the field compulsory.u can go to the 'Goto' in menu and in this go to 'Sample code' .Here u will find how to use this badi.

To Display the whole long text on a report display

Hi All,
Pls let me know how can i display the full long text in a column of a report display. I am getting the long text from the function module READ_TEXT.
This is very urgent
Thanx in advance
Suresh

Do you have a fixed column width. If so, do you want to break the text up into lengths of that fixed length.
Example...
Sales Order Item Material Long Text
123456 10 6000000 This is the long
 text of the material
 6000000 for the
 sales order 123456.
Regards,
Rich Heilman

Problems with printing the text in JTextPane

Hello
I need to print the text in a text pane. It prints the first page of the text pane and it doesn't print the rest of the text. I don't know what the problem is.
The code I am using, is below. I
Thank you.
LilyLay
import java.awt.*;
import javax.swing.*;
import java.awt.print.*;
public class PrintUtilities implements Printable {
private Component componentToBePrinted;
public static void printComponent(Component c) {
new PrintUtilities(c).print();
public PrintUtilities(Component componentToBePrinted) {
this.componentToBePrinted = componentToBePrinted;
public void print() {
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if (printJob.printDialog())
try {
printJob.print();
} catch(PrinterException pe) {
System.out.println("Error printing: " + pe);
public int print(Graphics g, PageFormat pageFormat, int pageIndex) {
if (pageIndex > 0) {
return(NO_SUCH_PAGE);
} else {
Graphics2D g2d = (Graphics2D)g;
g2d.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
disableDoubleBuffering(componentToBePrinted);
componentToBePrinted.paint(g2d);
enableDoubleBuffering(componentToBePrinted);
return(PAGE_EXISTS);
public static void disableDoubleBuffering(Component c) {
RepaintManager currentManager = RepaintManager.currentManager(c);
currentManager.setDoubleBufferingEnabled(false);
public static void enableDoubleBuffering(Component c) {
RepaintManager currentManager = RepaintManager.currentManager(c);
currentManager.setDoubleBufferingEnabled(true);

public int print(Graphics g, PageFormat pageFormat, int pageIndex) {
if (pageIndex > 0) {
return(NO_SUCH_PAGE);
} else {if (pageIndex > 0) return (NO_SUCH_PAGE)
prevents printing any more than the first page.
change >0 to >= numPages
Howard Amos

Error loading file in the operation long text in the General task list

Hi all,
I couldnt upload the detailed check lists in the operations (operation tab) of the general task lists through the long text uplaod via Text->Upload->RTF---> .System is throwing the following Information...
1.Error loading file " specified path with filename.rtf"
Could you please give me any idea to eliminate this.The client is having the detailed check list for each and every operation with safety measures to be taken.
Plz help.
Regards,
Suresh.

Hi all,
It was an authorisation object missing and the problem got solved.
Regards,
Suresh.

Problem in printing the selected labels value in smartform-SD_PACKING.....

Dear all,
Iam trying to print the packing list using smarforms,
T.Code - VL74 - After providing the input for the selection screen,
eg. output_type - 0001.
 outbound.deliv - 80000834.
In the "OUTPUT FROM HANDLING UNITS" screen, im getting the list of labels available for that selection.
say for eg.
HU Ob Object key Out. Med Role Name 1 City PkMtT PackMatls
1000004002 01 0080000834 0001 1 WE CALCADOS LTDA BENTO GONCALVES Z001 300026
1000004003 01 0080000834 0001 1 WE CALCADOS LTDA BENTO GONCALVES Z001 300026
1000004005 01 0080000834 0001 1 WE CALCADOS LTDA BENTO GONCALVES Z001 300026
1000004006 01 0080000834 0001 1 WE CALCADOS LTDA BENTO GONCALVES Z001 300026
with the Selection check box attached to the first field, when i
select the first and second HUs, it should be passed to the
driver program, but im getting only one HU value passed into the driver program.
In the driver program my code goes like below,
REPORT ZSDPACKDR LINE-COUNT 100 MESSAGE-ID VV.
TABLES: VBCO3, TVST.
INCLUDE ZPALIDATA_PL.
INCLUDE RVADTABL.
DATA: RETCODE LIKE SY-SUBRC, "Returncode
 XSCREEN(1) TYPE C. "Ausgabe Printer/Screen
Internal table for lips
DATA: lips_wa TYPE lips.
DATA: int_lips LIKE lips_wa OCCURS 0 WITH HEADER LINE.
*& Form ENTRY
 text
 -->RETURN_CODE text
 -->US_SCREEN text
FORM ENTRY USING RETURN_CODE US_SCREEN.
 CLEAR RETCODE.
 XSCREEN = US_SCREEN.
 PERFORM PROCESSING USING XSCREEN.
 IF RETCODE NE 0.
 RETURN_CODE = 1.
 ELSE.
 RETURN_CODE = 0.
 ENDIF.
ENDFORM. "ENTRY
FORM PROCESSING USING PROC_SCREEN.
 PERFORM GET_DATA.
 CHECK RETCODE = 0.
ENDFORM. "PROCESSING
FORM GET_DATA.
REFRESH: LVBPLK, LVBPLA, int_lips.
CLEAR: LVBPLK, LVBPLA, int_lips.
 DATA: FM_NAME TYPE RS38L_FNAM.
 VBCO3-VENUM = NAST-OBJKY. "00000.....
 VBCO3-SPRAS = NAST-SPRAS. "D
 VBCO3-KUNDE = NAST-PARNR. "KUNDE
 VBCO3-PARVW = NAST-PARVW. "WE
 VBCO3-PACKD = 'X'.
 CALL FUNCTION 'SD_PACKING_PRINT_VIEW_SINGLE'
 EXPORTING
 COMWA = VBCO3
 IMPORTING
 VBPLK_WA = LVBPLK
 VBPLA_WA = LVBPLA
 VBADR_TVST = LVBADR "n_916660
 TABLES
 VBPLP_TAB = LVBPLP
 EXCEPTIONS
 SHIPPING_UNIT_NOT_UNIQUE = 1
 SHIPPING_UNIT_NOT_FOUND = 2
 OTHERS = 3.
 IF SY-SUBRC NE 0.
 RETCODE = 1.
 PERFORM PROTOCOL_UPDATE.
 ENDIF.
in the above coding, i used SD_PACKING_PRINT_VIEW_SINGLE', but i tried with SD_PACKING_PRINT_VIEW also, but no values getting loaded in the importing structures. if im doing anything wrong, pls correct me.
*CALL FUNCTION 'SD_PACKING_PRINT_VIEW'
EXPORTING
 COMWA = VBCO3
AUFTRAG_NICHT_LESEN = ' '
EXPORTDATEN_NICHT_LESEN = ' '
IMPORTING
VBPLA_WA =
TABLES
 VBPLK_TAB = LVBPLK
 VBPLP_TAB = LVBPLP
 VBPLS_TAB = LVBPLS
EXCEPTIONS
OBJECT_NOT_FOUND = 1
OTHERS = 2
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
The problem is:
For any of the above function call,
The VBCO3 itself im getting only one label number, hence it is processing for only one, i want to know how to pass on the multiple
label number to this function call ie, in VBC03.
meaning i would like to know, in which internal table , i can get the list of all the selected HUs, so that i shall loop this function call inorder get the appropriate output.
kindly help me to sort this issues.
Points assured.
regs,
Raja

Dear Srihari,
I wrote above code in first label(now i deleted do-enddo) only.
first i am moving seven lebels data into seven wa's.
after that reading the first record and moving another itab(for printing at main window i.e. 8 label).
clearly, there is no space problem..because instead puttting all the required field i put only customer name.
Now it is printing well in first page with 8 labels(main window) also.
But in the second Page it displays only 7 labels and not printing rest of the labels.
for example my itab has 20 records it displays 8 labels in first page &
next 7 labels in second page and not print the rest of the 5 labels i.e. it is not calling third page(?).
code..
CLEAR : WA1, WA2, WA3, WA4, WA5, WA6, WA7.
loop at it_final into wa_final FROM 1 TO 7.
if sy-tabix = '1'.
 wa1 = wa_final.
elseif sy-tabix = '2'.
 wa2 = wa_final.
elseif sy-tabix = '3'.
 wa3 = wa_final.
elseif sy-tabix = '4'.
 wa4 = wa_final.
elseif sy-tabix = '5'.
 wa5 = wa_final.
elseif sy-tabix = '6'.
 wa6 = wa_final.
elseif sy-tabix = '7'.
 wa7 = wa_final.
endif.
endloop.
 delete it_final from 1 to 7.
**Push every 8th row if it_final in it_main
 read table it_final into wa_final index 1. "deleting 8th, 16th,... records
 if sy-subrc = 0.
 append wa_final to it_main.
 else.
 exit.
 endif.
*Delete the rows from it_main which are present in it_final
loop at it_main into wa_final.
 delete table it_final from wa_final. "deleting 8 th row from it_final.
endloop.
Edited by: anurag.radha on Jan 6, 2012 1:09 PM

Polish letters not displayed correctly in quality notification long text

Hello,
in quality notification: when trying to write text in Polish language, some non-english letters are displayed incorectly.
I did not find possibility to change the text language as in e.g. sales order texts. Using PL as login language solves the situation if MS Word view of long text is opened but not if text displayed in notification in "SAP view". Anyway different login language is not desired solution.
Any help is appreciated
Thanks
Br Jan

Is there any possibility of upgrading?
2.5.2 is over 5 years old now and there are many improvements and bug fixes for language support in newer versions.

Problem in Printing the work area

Hi Everybody,
I'm working in upgrade project.
in 4.7 version, directly trying to print the work area and assign to some other fields.
Eg: write: Mara.
text = mara.
but in 6.0, its not allowing to assign directly like this.
Plz help me urgently. B'coz, we struck in middle.
Thanks in advance.
Regards,
JaganMohan.

Hi,
basically the problem might be in the ecc 6.0 for the attributes of the program where u r writing it might be u checked the unicode check box if it so remove it and then try or else it is proiblem with the unicode in the ecc 6.0 system where u r working
plzz reward if it is usefull
plzz dont forget to reward...

Problem in printing the notification long text in tocde iw53.

Similar Messages

Maybe you are looking for