Problem in Printing with Second Page

Hi Experts,
I am trying to print a letter which comes in 2-3 pages.I made one smartform for that ,its working fine when i see print preview of output.But when i take printout of that, second page overlaps the first page.This problem is persisting from a very long time but my all efforts went in vein.Kindly suggest where is problem actually lies.
Regard,
Ashish

Hello friend,
There is already a thread available in SDN. Please check the link below and see whether its because of this situation you are getting the wrong input. If your situation is different let me know i will try and come back to you as soon as possible.
Smartform Printout overlapping
Check also this thread
Print out of Smartforms(first page&second page) is not as in Print Preview.
Thanks,
Sri Hari
Edited by: srihari.kumar on Dec 16, 2011 3:39 PM

Similar Messages

Two pages are printing with second one blank though there is no data

Hi All,
Got One Ticket as :- While Printing the form Two pages are Printing Automatically Though the data Consists of only one page it is getting printed the second page as empty.
Please let me know What Could be the reason My Guess is if we reduce the font size we can able to avoid the second page printing
Any Suggestions
Regards,
Kumar
Edited by: kumar kumar on Jun 10, 2010 2:34 PM

Hi,
There is a chance of an empty line in any of your text node,
this is after your variable in any of the text node there is a chance of assiging a paragraph format
with out any variable in that line.
you can check this by selecting the pencil icon in the text nodes and go to change editor.
Thanks,
Phani.

Not printing the Second Page in SMARTFORM

Hi,
I am working on Purchasing Smartform... I have created a layout with 2 Pages.. In 1st page I have the Data and in 2nd PAge i am having Terms & Conditions.. But in the output 2ndpage is not printing.. Please help me regarding this issue...
Thanks in Advance
Muralikrishna

>
muralipsharma wrote:
> Hi Arul,
>
> I did what ever you said in previous message, but still i am not printing the Page2... you said that go to COMMAND node, for which window I have to create COMMAND node.. I have created a COMMAND node for MAIN window in FIRST page.. but still its not displaying...
> Actually in my First page I am having the data and in second page I am having Terms and Conditions in MAIN window..
> Thanks in Advance,
>
> Regards,
> Muralikrishna
>
> Edited by: muralipsharma on Jul 30, 2010 3:05 PM
is the first page completely filled with data or do you always want to print the second page no matter if there is an overflow or not ?
so you have defined a new page like 'NEXT' .
then in the 'FIRST' page create an event and a command and check next page.

Problem to print with iPhoto and epson stylus photo RX620

I asked a question about the print with Iphoto. Larry gave some explainations but it still doesn't work. I can change the reglages with Safari, with Mail but not with Iphoto. So when I try to print photos, the reglage is standard and the result is bad. I would like to change the reglage, if i use glassy photo paper. With my PC, I have no problem to print with window or picassa. Thanks for your answer.

First I have no idea in the world what "reglage" is
But what ever printer specific options are available are supplied by the manafacturer's print driver and these are available on the last print window
LN

How to prevent printing empty second page?

Hi,
When the report is printed from the web it is printing a second page which is empty.
Report is a rdf report, when previewed in reports builder it is only one page.
Is there any setting in the report properties to avoind printing second page?
Please let me know.
THanks

I fixed it. I removed the value in "After Report Value" in the report properties and it worked.
Thank you all...

Problem in Continuous check printing from second page in F-58

Hi ,
I am using T code F-58 to trigger cheques. I have made a Z* of the standard script F110_PRENUM_CHCK as I just require the Payee name, date, amount in digits and amount in words to be printed on the cheque.I am using the continuous stationary for the cheque . I am using EPSONLQ1150II DOT Matrix printer.
The cheque dimensions are ; width:202 MM and Height 94 MM excluding the dots on either side.
I have created a z page format with the same dimensions ,
also created format type with same name and for device type SWIN - Windows printing via SAPlpd
z format is linked.
Also in local system , i defined z page dimensions in server properties
and selected printing preferences as this z page size .
Issue :
When i am trying to take print , check is printing properly in first page for spool 1 .
If again when trying to print 2nd spool , check is not printing properly in second page check.
It is printing 2mm down , for 3 rd page further printing downwards.
As this is pre printed stationary data is not lying correctly from 2 nd page onwards.
kindly give me any suggestions how to rectify this.
Thanks & regards,
Hari priya.

Issue is not resolved.
kindly give me any suggestions..
In SWIN - Windows printing via SAPlpd device type , for DINA4
Printer initialization : # no action.
End of page is having \f
End of line is having \n
Reset after exit is having # sapwin x_paper
Cover page is : # no title page
all are in green.
Same thing i included for MY z page format . But still it is printing same as mentioned above.
Kindly suggest how to write initialization for z page format for SWIN device type.
thanks & regards,
Hari priya
Edited by: Hari Priya on Apr 25, 2011 9:16 AM
Edited by: Hari Priya on Apr 25, 2011 11:57 AM

Fillable form will not print the second page

I have created a fillable two-page Acrobat form using Adobe InDesign. Everything appears to be okay with the form, except that the second page does not print. The first page prints okay, but the second page exits as a blank page without content from the form or the user-entered data.
2012-2013 Professional Development Funding Request

For Macintosh the AdobeViewer Plugins does not function and Hasn't since Acrobat 8. Adobe has no intention of fixing it, I received a nasty reply: what feature do you want removed in order fix the problem. Its not worth it and we have no intention of ever fixing it. However its shipped and installed on the Mac version
The only PDF Plugin that works is PDFBrowser Plugin by Schubert of Germany, and it appears he has discontined updating although Thankfully It works in OSX.8 with most mdern Updates. You can Only fill out forms by opening Chrome, iCab , and OperaNext only Safari doesn't work and any product using the Gecko Rendering engine (Mozilla Products , FireFox and SeaMonkey Form Fields don't work or crash the browser. (depending upon version of the pdfBrowser Plugin).

Margins problem when printing to PDF (Pages '09 v4.0.3 build 766)

Hi,
I don't know if this is connected to the latest Mac OS X v10.6.4 update, but some of my machines exhibit a very curious behaviour.
+ multiple pages A4 document
+ choose File > Print, click on "Save as PDF", under the PDF button
++ set pages 6 & 7 to print
++ set 2 pages per spread, so as to have Pages shrink the A4 document to somewhat A5, and have the two pages side-by-side on the same sheet
++ save the PDF
Then, when I open the PDF with Preview, the margins are all wrong (i.e. too big, there's too much white running around).
And from Preview's inspector, I can tell that the Page Size is set to US Letter, although in Pages both the document size AND the Printing Format are set to A4.
The most curious part of the story is that my MacPro, my work MacBook Pro 13 and a white MacBook exhibit the problem, whereas my personal iMac 27" DOES NOT.
And they are all running Mac OS X v10.6.4, with ALL the most recent updates, and the exact same version of Pages!!!
I suspect that something has been changed in a framework somewhere, but I cannot figure out what it is...
Any idea is welcome!
Thanks,
K2r

I can do the same in TextEdit (although it's even more painful to control the margins!!).
My problem is not that Pages won't put pages on one sheet; It's that the generated PDF does not respect the sheet physical size (A4 vs. US Letter), thus adding wider margins all around the document.

Scroll Bar Problem after Printing a web page containing multiple page data

Hi All,
I have a web application which has two DIV, one is main and one is child. I am having problem in printing multiple pages. There is a lot of data in the child DIV and i am using JavaScript functions to control the print functionality. When i print using window.print(), only the data on the main page currently being showed is printed. I further researched and checked out the Style.Overflow property.
Now i am using divMain.style.overflow = "visible"
After this the complete print comes. But in Firefox, the scroll bar disappears and only single page is left with no scroll bar .
Now if after print i give divMain.style.overflow = "Auto" OR divMain.style.overflow = "Scroll", still the scroll bar doesn't come and if it comes then its inactive. I am unable to see the complete data on the page after the print is taken.
The problem is not coming in I.E and the full data with scroll bar is recovered in I.E.
Please help me how to get the normal page with full data and scroll bar after printing in Firefox.
Thanks,
Manuj

hi, i would update my reader first to the newest version.
does the size of the textfield never change, independant how much text is in it?
perhaps check your subforms, if they are type "position" size does not change in my opinion, except your parent subforms expand to fit....
or use "flowed" subforms...and regard the parent subforms too!

Smartform problem how to make second page main window dynamic?

Hi SAP Community,
I am facing a problem with designing a smartform. I have taken a table in the main window of the first page, and the main window length varies according to the number of entries in the table. If the records are more than that can be adjusted in the first page then the ramaining records move to the second page main window. After the second page main window i have defined a window which i have marked to get displayed after the main window, but the problem i am facing is that that the second page main window is geting overlapped with the window defined to come after it. Can any one help me with how to control the length of second page main window dynamically.
Regards,
Tushar

Hi,
Normally, to trigger next page the main window is mandatory.
However, if the contents of main window are not sufficient enough to move over to next page then the next page would not get trigerred.
Moreover, please check whether the table of contents in the first page are also existing in the next page otherwise you need to trigger a new page by using a command.
Also please direct the next page of SECOND page to SECOND itself and check.
Regards,
Ram

While Printing on Second Page the Space for Header is not considered

Dear All
we are using LIPI Line Printer and First page is Printed Correctly but at the time of Printing second page (for another invoice or same invoice second copy) the Space for invoice Header is over written by the Content of the smart form.
In smartform that space for the Invoice Header is left blank.
Please Suggest how to remove the Problem.
Virandra Sharda
9427630630

Hello,
I can't see any relation to DB2 therefore you should ask your question the ABAP Development » Form Printing forum (for any reason I cannot move the thread).
Regards,
Thomas

Adobe Acrobat Distiller Prints every second page blank

Running Windows Vista with Adobe Acrobat Pro 8.1. When the user converts web base html document ( IE 8) to PDF in Legal format we end up with every second page bank or the footer over printing. We have changed the header/footer settings in Acrobat and under print properties to no avail. Other cleared cache reset IE users have exactly the same Vista image and install of Acrobat Pro and it is not an issue.
Any ideas on this thanks!

When printing deselect "Choose paper source by PDF page size"

Problem to print with HP Color LaserJet CP3525 (PCL 6) on Server

Hi,
I have a printer HP Color LaserJet CP3525 in a server, and I installed with the correct drivers for that but the printing output is strange. I'm trying to print in A4 paper, and everything is just printed in 1/4 of the page. The most strange is that the graphics are scaled to the 1/4 of the page while the text is exactly with the same size than the complete page, but all the letter are overlapping each other.
I also tried to print with a generic configuration and print in all the page but I can't print with color, just the black toner is used, so the quality is really bad.
Please, help me!

This sounds like a driver issue. You mention the printer being PCL6. Can you confirm which driver you are using when the 1/4 page prints occur. My guess is that it would be one of the Gutenprint drivers included with SL and this sort of output can occur when the printer driver is not supported by the printer.
Also, with regards to the Generic, which I assume is the Generic PCL Laser Printer driver included with SL, this by default is set to 300dpi. You can change this print quality setting to 600dpi, which will improve your output, especially the graphics. However this driver only supports black & white printing. So if you want to print in color from the Mac and the printer does not support PostScript, then you should look at installing the pxlmono package.
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o
Note that you will need the pxlmono, Foomatic and Ghostscript packages to use this driver suite.

Problem in navigating 2 second page

Hi ,
actually the scenario is like this:
1) when i give the partner no as input it will display the output details as guid,header,item,object_type,partner_no.---first page
2) Again if i click on the header in this output it have to go next page and have to display the details of header like service order,process type etc.
here upto first part i done .and the i created next page also
i done the following code in first page oninput processing
CASE event_id.
WHEN 'clickon'.
    navigation->set_parameter( 'header' ).
    navigation->goto_page('second.htm' ).
ENDCASE.
i done the following code in next page oninitialization
data: header type crmd_orderadm_h-guid.
header = request->get_form_field( name = 'header' ).
select object_id
guid
posting_date
process_type
created_by from crmd_orderadm_h INTO corresponding fields of
table index1
WHERE guid EQ header.
now the problem is i m not able to click on header of first page output .after clicking on that i have to display next page details.
Please solve the problem
Thanks,
Usha

i created 2 pages.
in first page
LAYOUT:
<html>
<head>
<title>
Retrieving service order details
</title>
</head>
<body>
<form>
<form method = "post" action= "first.htm">
    partner_no: <input name= "partner_no" /> <br>
    <input value="submit" type= "submit"/>
    </form>
<% if not index[] is initial.     %>
<table>
<tr>
<td width= "150" align= "left"><b>GUID</b></td>
<td width= "150" align= "left"><b>HEADER GUID</b></td>
<td width= "150" align= "left"><b>ITEM GUID</b></td>
<td width= "150" align= "left"><b>OBJECT_TYPE</b></td>
<td width= "150" align= "left"><b>PARTNER_NO</b></td>
   </tr>
<% loop at index into wa .     %>
   <tr>
   <td width= "150" align= "left"><%= wa-guid    %></td>
<td width= "150" align= "left"><a href= "second.htm"><%=wa-header    %></a></td>
   <td width= "150" align= "left"><%= wa-item    %></td>
   <td width= "150" align= "left"><%= wa-object_type    %></td>
   <td width= "150" align= "left"><%= wa-partner_no %></td>
    </tr>
    <%Endloop.      %>
<%data:temp(20) type c.
move wa-header to temp.    %>
</table>
ONINITIALIZATION:
data: partner_no type crmd_order_index-partner_no.
partner_no = request->get_form_field( name = 'partner_no' ).
select guid
header
item
object_type
partner_no from crmd_order_index INTO corresponding fields of
table index
WHERE object_type eq 'BUS2000140' and partner_no eq partner_no.
ONINPUTPROCESSING
CASE EVENT_ID.
WHEN 'clickon'.
    navigation->set_parameter( name = 'head'
                                value = 'temp').
    navigation->goto_page( 'second.htm' ).
ENDCASe.
type definitions:
types:it_index type standard table of crmd_order_index,
      wa_index type crmd_order_index.
PAGE ATTRIBUTES:
index type it_index
wa type wa_index
head type c
temp type c
I_N SECOND page :_
LAYOUT
<html>
<head>
<title> Service order details</title>
</head>
<body>
<table>
<tr>
<td width= "150" align= "left"><b>GUID</b></td>
<td width= "150" align= "left"><b>OBJECTID</b></td>_
<td width= "150" align= "left"><b>POSTINGDATE</b></td>_
<td width= "150" align= "left"><b>PROCESSTYPE</b></td>_
<td width= "150" align= "left"><b>CREATEDBY</b></td>_
</tr>
<% loop at index1 into wa1.     %>
<tr>
   <td width= "150" align= "left"><%= wa1-guid   %></td>
   <td width= "150" align= "left"><%= wa1-objectid %></td>_
   <td width= "150" align= "left"><%= wa1-postingdate %></td>_
   <td width= "150" align= "left"><%= wa1-processtype    %></td>_
   <td width= "150" align= "left"><%= wa1-createdby %></td>_
    </tr>
   <% endloop.     %>
</table>
</body>
</html>
TYPE DEFINITIONS:
TYPES:itindex1 type standard table of crmd_orderadm_h,_
      waindex1 type crmd_orderadm_h._
PAGE ATTRIBUTES:
index1 type itindex1_
wa1 type waindex1_
temp1 type c
head type c
ONINITIALIZATION
data:temp1(20) type c.
data:head(20) type c.
temp1 = request->getform_field( name ='head' )._
select guid objectid process_type posting_date created_by_
   from crmdorderadm_h into CORRESPONDING FIELDS OF TABLE index1_
where guid eq temp1.
now the problem is i m not able to displaying second page output..
Plz solve this problem.
THANKS,
Usha
Edited by: Usha Rani Rachamalla on Jan 23, 2008 7:59 AM

Map with 500 pdfs. How to make a new file with only the first pages, new file with second pages etc.

Hi,
A client confronted me with the next question:
I have a map with 500 pdf's in it.
Is it possible to make a new file with only the first page of each pdf?
After that to make a new file with only the second page of each pdf?
And after that the third?
Etc.
Is that possible with an action?
Or are there scripts for?
I couldn't find them.
I use an iMac with Acrobat XI.
Any help is very welcome.
Thanks in advance.
Bornholm

You can extract each page from each pdf as a seperate page. Once this is done you can select the pages tocombine.
You would have to write custom a custom JavaScript and programatically code the names to combine if the extracted file pages habvestandars naming that could be programed. There maybe some security coding you will have to do because of Adobe restrictions but this all documented in the Acrobat JavaScript Reference.

Problem in Printing with Second Page

Similar Messages

Maybe you are looking for