Problem in process chain after upgrade

Hi,
   We recently upgraded our sysetm to BI7.0 version.When I tried to run a process chain,it failed at the data load step.I tried to see  the  message but it is throwing an error like "object not persistent".so can somebody let me know what is the error here...
Thanks
Karthick

Hi Karthik
I assume variant(EXOR) has been used in another process chain which is inactive status, if we create Process Chain 'A' with variant (EXOR) and create another Process chain 'B 'with same variant(EXOR) and inactive status, PC 'A' doesn't execute though its in active status, it will work only when both process chains were in active status, please find in which process chain this variant has been used, remove/activate variant(EXOR) and execute your primary process chain, hope this will resolve your issue, please let me know if this doesn't resolve your issue
-DU

Similar Messages

  • "URGENT"Infopackage load error in process chian after upgrade

    Hi Gurus,
                   We have a strange issue in one of the process chain after upgrade from 3.5 to NW 2004s. In a process chain we have 5 info packages, 3 in parallel as they load data in 3 different cubes and 2 in series after successful completion of info packages on top.
    Now the process chain shows red info package with error message “ Last delta upload not yet completed. Cancel”
    When we check the RSMO, we find all the 3 loads on top finish successfully while in process chain log display as error at info package with above error message and process chain never advances. Actually loads finish successfully but process chain shows error in info package.
    When we investigated further, the request ID in failed info package in process chain shows different ID which never loaded in cube but data load takes place successfully using different request ID(checked in RSMO and request in cube).
    I suppose the process chain trigger the info package load twice simultaneously, one load get successful and second load request failed in log as first one is running…this is my guess…
    Please help me as this is an urgent issue.
    Regards,
    Anil

    Hi All,
    We fond the root cause of the error message. Actually when we trigger the process chain, the info packages loads get triggered twice after an interval or around 2 minutes.
    Here if zero records are loaded then second request ( after 2 min) get loaded too with zero records but if first request is loading some records then second request will find the data load still running and will throw error as last delta still not finished.
    Have you seen this scenario before?
    Regards,
    Anil

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Process Chain after EVENT - More than once

    Hi all, I would like to run a process chain after an event; everything works fine with the following model...
    PC1 >>
         >> some processes
         >> EVENT TRIGGER
    PC2 >>
         (after EVENT) runs ok after event ONLY if I SCHEDULE it
    After succesfully run, I've tried to run again immediatly PC1 again and it runs ok, even triggers mentioned EVENT, but PC2 never runs again until I manually SCHEDULE it.
    The answer is: how should I SCHEDULE the process chain PC2 so I'll "never" need again to SCHEDULE it when I want it to run after event triggered on PC1?
    Hope you can help me.
    Thanks a lot!
    Bernardo

    Hello,
    Both process chains are separated. At the model I described, at the end of PC1 event is succesfully triggered. After event is triggered at PC1, PC2 triggers correctly due it is scheduled as "after event".
    Everything works fine, then, if I trigger PC1 again it runs correctly; event is triggered succesfully but PC2 (that is scheduled as "after event") doesn't runs; this is because I haven't SCHEDULED it again (after the first succesfully run).
    What I want is not schedule PC2 after a succesfully run. Is there any way to reach that purpose?
    Thanks again!
    Bernardo

  • Why I am facing signal problem in my 4s after upgrade to os 5.0.1

    Why I am facing signal problem in my 4s after upgrade to os 5.0.1 and how can I solve it

    Hi, i also got the same problem. pls let me know if there any luck.
    01738855651
    Tusher
    Thanks Man

  • Unable to start Hyperion EPM Architect - Process Manager after upgrade

    Hi All,
    I'm unable to start Hyperion EPM Architect - Process Manager after upgrading from EPMA 11.1.1.3.0 to 11.1.1.3.03. I get the following error in the Event Viewer.
    Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> Hyperion.DataAccessLayerCore.DataAccessLayerException: Database version mismatch:  Hyperion.SessionManager schema version is 9.5.0.0.0.10,  database schema version is 9.5.0.0.9.1.
    at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion)
    at Hyperion.SessionManager.DAO.SessionManagerDataAccessLayer..ctor(NameValueCollection settings)
    at Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.Initialize(String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout)
    at Hyperion.DimensionServer.SessionManager.SessionManager.Initialize(String jvmPath, String classPath, String ctgLibPath, String cssConnInfo, String hubHost, String hubPort, Boolean enableNestedGroups, String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout, Boolean restorePastInstanceSessions, Boolean ...
    I've run through all the steps of patching EPMA ran the Oracle_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql script per the patch readme. But can't figure out where it's pulling the schema version number from. Any ideas?
    Thanks,
    Chuck

    Hi,
    you forgot to update the EPMA database. Last step in patching is:
    Now, you must run the database upgrade script before starting the process manager.
    Run the single database upgrade script that corresponds to your database vendor.
    Oracle_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
    SQL_Server_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
    DB2_Upgrade 9.5.0.0.0.10 to 9.5.0.0.9.1.sql
    The scripts are located in the following directory:
    %HYPERION_HOME%\OPatch\EPMA_11_1_1_3_01\files\products\Foundation\BPMA\Server\conf\
    hope that helps.

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • Problem in Process chains - Need help

    Dear Experts
    I have a problem in Process chains
    I have  ODS1  from which Iu2019m updateing the  ODS2 and ODS3 with same Delta infopackage.
    The difference between ODS2 and ODS3 is in ODS2 Iu2019m loading with Local Currency
    And in ODS3 is getting loaded with Group Currency
    When Iu2019m running with Process chain  its executing twice as below
    First time : It is showing only ODS2 as the Datatarget  and loading all the delta records to ODS2
    Secondtime: Its showing both ODS2 and ODS3 in Datatarget and loading with 0 Records.
    In this way No record is getting updated in ODS3.
    Could you please share your thoughts on why it is triggering twice ? And how we can avoid this.
    Thanks
    Lakshminarayana

    Thanks Shambu for quick reply
    The variant  is being used to load the ODS2 & ODS3  and Automatic further processing tick also removed.
    Thanks
    Nerusu

  • Execute Process chain after infopackage run for a PC file

    Hello all.
    The scenario I need to solve is the following.
    I have several files to be load to ODS from P users PC. I will do this with an info package. But after this load there are some more process that have to be run whoch are created in a process chain.
    I would like to automate the execution of the precess chain right after the load from PC file is done.
    Any sugestions?
    Thanks and regards,

    Hello Javier Alvarado,
    If you use process chains, the automatically integrated processes are ignored and have to
    be implemented using the process chain. If you schedule a specific process in a chain,
    you support the automatic insertion of additional, relevant standard processes with the
    consideration of such automatic actions.
    For example, if you have selected the processing types Only PSA and Subsequently in
    Data Targets in the InfoPackage from the tabstrip Processing, and you are using this
    InfoPackage in a process chain, then the further processing into the data target does not
    automatically happen. Instead, it only happens if the process Update PSA is scheduled in
    the respective process chain after the loading process. Thus, the process chain
    maintenance supports the automation in this case. In this way, you generate a process
    variant for updating from the PSA in the chain when inserting the loading process with the
    process types Only PSA and Subsequently in Data Targets automatically into a chain.
    Well i am talking about 30B Version
    Regards,
    Mohan.

  • Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

    I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

    It is best to wait till there is a 10.9.1 update as new OS X systems always cause problems to some installations. Better not to risk losing data unless you have a bootable clone that enables you to revert to the original (pre upgrade) state. Haste makes waste.
    Check this thread if you wish to see what I am talking about.
    https://discussions.apple.com/community/mac_os/os_x_mavericks

  • TS3276 Has any one had problems finding RSS feeds after upgrading to 10.8?

    Has any one had problems finding RSS feeds after upgrading to 10.8?

    RSS feeds no longer appear in Mail in Mountain Lion (nor in Safari). You'll need a separate RSS application.
    BTW, this forum is for Mac OS X 10.7 Lion. The forum for OS X 10.8 Mountain Lion is this one:
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion
    Regards.

  • Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

    Hi,
    We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
    Thanx
    deepak

    What kind of problems?
    I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
    This is your best bet.
    If you still have problems, contact NI and ni.com/ask and start a support inquiry.

  • Invalid DataStore object name error when running process chain after EHP1

    Hello,
    We recently upgraded our BW Dev platform to NW7.01 EHP1 SP6. I noticed that the layout for "Delete PSA Request" process in the Process Chain has changed after the upgrade. We can no longer specify the actual PSA table to delete eg, /BIC/B0001645. Instead we need to specify the Datasource name and the Source System.
    Now after the upgrade when I run one of my process chains, it fails at "Delete PSA Request" step with error message "Invalid DataStore object name /BIC/B0001645: Reason: No  valid entry in table RSTS". This datasource is based on the flat file source system and the PSA table for this Datasource is /BIC/B0001653.
    Unfortunately the process chain is picking up an older PSA table for this datasource and there is no way for me to specify the current PSA table name after this change in layout with EHP1 upgrade. Any suggestions on how to resolve this issue.
    Many Thanks,
    Al

    Hi,
    Please implement OSS 1345331.
    If this does not help try the below steps:
    1.  Run the report 'RSAR_PSA_CLEANUP_DIRECTORY/_MS' in check mode for a 
           particular PSA table for finding the inconsistencies.
    2.   After that please analyze the logs and if there is any problems related to partition, you need to correct them using the report u2013
    3.  'SAP_PSA_PARTNO_CORRECT' in repair mode for the
          PSA tables.  Run the report again after this
    4.  'RSR_PSA_CLEANUP_DIRECTORY/_MS' in check mode to 
         double check that the invalid partitions are 
         corrected.
         Once this is done you can execute the report     
         'RSR_PSA_CLEANUP_DIRECTORY/_MS' in repair mode.
    -Vikram

  • Problem in Process Chain Scheduling

    Hi BW Experts,
    We are running daily Process Chains in the Night Time.
    Due to Memory Problem in BW Production Server we stopped all Process Chains on 20/09/2007.
    Yesterday our memory problem solved. So I scheduled Process Chains Yesterday.
    We have Timings like:
    22:30 PM
    23:00 PM
    23:30 PM
    23:50 PM
    01:30 AM
    06:00 AM
    Yesterday we scheduled all Process Chains as per above timings.
    But when iam going to schedule the 01:30 AM Timing Process Chain on 11-10-2007 , but it is taking 12-10-2007.
    It is taking one extra day.
    Generally it has to run today 11-10-2007. But why it is happening.
    For 06:30 AM timing Process Chains also same problem.
    So we noticed that after 12:00AM, it is taking one extra day.
    Please give me the reply.
    Thanks & Regards,
    Anjali

    Hi Venkat,
    I scheduled it tomorrow at 01:30 AM , it is taking 13-10-2007.
    If I schedule any process chian after 12:00 AM, it is taking one day extra.
    This is happening since 5 months.
    ECC 6 has been upgraded successfully in May month.
    After ECC 6 Upgradation we are facing time delay problem.
    Before ECC 6 Upgradation we never faced this problem.
    Regards,
    Anjali

Maybe you are looking for

  • The use of clean-out orders

    Dear SDN Is it possible to have clean-out orders created automatically, without using campaign management? We do not use campaign management functionality, and the production runs clean-out orders between process orders. We would like to have system

  • FCPX crashed. Crashes now at startup.

    PROBLEM REPORT reads like so: Process:         Final Cut Pro [760] Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro Identifier:      com.apple.FinalCut Version:         10.0.7 (213121) Build Info:      ProEditor-213120010

  • How can I burn a DVD from iMovie '11?

    I just discovered that iDVD does not come with iLife '11 as part of the 10.7 OS. The option to "share" as a DVD is still part of iMovie 9.0.4, but the process never completes because iDVD is not there. Is there a work around? Apple suggested using th

  • Black box instead of footer

    When using Adobe Acrobat 9 to create a PDF from a word 2007 document - the resulting document has a black box where the footer of the document should be.  The black box stretches the width of the document and covers the entire footer.

  • How to get adobe-signatures-client jar ?

    Hi there I need to develop a java applet which can quickly inject and read a signature in a PDF document. I found this guide, which seems perfect to do it : http://help.adobe.com/en_US/livecycle/9.0/programLC/help/index.htm?content=000910.html. But i