Problem in Production as Login Credentials changed

Hi,
This is a scenario from IDOC to JDBC.
This is a case arised due to blocking of the id, which we were previously  using in XI for getting connected from R/3 systems, ie the RFC destinations from R/3 to XI were using that login credentials.
So the scenarios failed.
Again we reset the ID with the same password. But the scenario is failing.
The idocs are reaching to XI , but the the pipeline steps are not executed. It is saying " INBOUND INTERFACE NOT FOUND"
This is a problem in Production, and we ve not touched any interface or mapping.Previously the scenario was working fine.
Pls give me the solution and we 'll give 500 points:-)
Regards,
Navneet

Quick Checks:
1. Check the status of User in R/3 which you have used in the RFC destination i.e SM59 and IDOC Adapter ? if it is locked , then unlock it. If password is the problem, then try to change the password.
Don't reset it ...
2. Also check out the status in XI, SM59... what is the user used ? is it correct etc... by testing the connection
3. I think the IDOC Metadata is having problem.. Go to IDX2 and reimport the metadata in XI.
Also note that, it is prefer to use Service User in SM59, and IDOC adapter instead of dialog use in the Production environment. so that no problem of locking etc
Hope this helps`
Rgds Moorthy

Similar Messages

  • How to change the error message Invalid login credentials

    Hi all,
    How to change the default error messages .
    1) In the Login page while giving wrong username or password .It showing
    Error message "Invalid login credentials".
    But requirement is change the above error message.
    2) I need to change the error message instead of "1 error has occureed"
    Thanks in Advance
    Sudhakar

    On the Login Page of the application create a 'Before Header' process with this code if  apex_application.g_notification ='Invalid Login Credentials' then
             apex_application.g_notification :='Your Altered Failed Login Message Here';
      end if;varad

  • Problem in testing UI add-on after login method changes

    Dear All Experts/Gurus,
    I have changed login method to a new one of a UI Add-on (because I just have SDK implementation version license). Using add-on identifier generator, I generate the add-on identifier string and put on the source code :
    Public Sub GetApplication()
        Set oSboGuiApi = New SAPbouiCOM.SboGuiApi
        oSboGuiApi.Connect Command
        oSboGuiApi.AddonIdentifier = "4CC8B8ACE0273A61489738C94047855DE8768CDD37F64D4F11E82759A542BD545D5A6E4D50A39B9E9FB20FA944FF35C5B60FE779"
        Set SboApplication = oSboGuiApi.GetApplication
    End Sub
    After recompile it, I want to prove it by sending it to other friend's (work mate) PC/notebook with different license and hardware key. The error message when installing/starting the add-on is :
    Runtime error '-7200 (ffffe3e0)':
    Connection - Connection string doesn't match UI development work mode.
    If the error happened, I just guessed that the login method change is success. I also read the SAP new license mechanism states that if the add-on is developed using SDK implementation version, it will only be able to install/use in the customer network PC and so on, ....etc.
    The problem is that I am not fully sure if my guess is correct. I want to conduct some testing. I tried to request new temprary license with compatibility license is over within 2 days, but unsuccessful. Would you please to tell me if there is another way to prove/test that  the add-on will be able to start after the compatibility license for add-on expires ?
    I appreciate your answer so much. TIA
    Rgds,

    Hi Steve,
    The AddOnIdentifier you obtain by selecting Development or Implementation options while creating the AddOnIdentifier depends on the license manager.
    If you change the license manager to another machine or someone connected to a different license manager try to run your code you it will not work.
    It is quite clear in the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13d67f3c-0e01-0010-eba2-cab13a5979c2">License Guide</a>:
    <b>Development License</b>
    This license is required for partners developing add-ons and the only license allowing distribution. <i><u>In Development license, the license key is shared by all developers connected to the same License Service</u></i>. The License Service allocates licenses on the basis of first-come, first-served.
    <b>Implementation License</b>
    This license is required for customers intending to develop small modifications or add-ons for their own use using only the UI API.
    <i><u>Add-ons developed under the Implementation license cannot run with a different License Service other than the one that was used for their development</u></i>. The Implementation license does not allow
    distribution to third-parties.
    Regards
    Trinidad

  • Folio Builder - cannot login after changing password

    Hi all,
    I changed my password at acrobat.com, now I cannot login with the new password from the Folio Builder panel in InDesign CS5.5. I'm on Mac OSX 10.6.8. Basically, the panel shows "Signing in..." and the endlessly spinning wheel, which means it's hanging and doesn't let me re-enter my login credentials.
    I have tried uninstalling and reinstalling the Folio Builder and Overlay Creator tools, and am running the latest versions of each.I've also tried trashing the INDD preferences. No luck. I'd like to avoid uninstalling/reinstalling InDesign CS5.5, but if that's the only solution, I'll do it.
    I did create a new user on my machine and that worked — I was able to login successfully with my new login credentials. But moving my production files and recreating all my settings from my account to this new one would take a while, so I wanted to see if there was another solution.
    Thanks in advance for any help!
    Jason

    Hi John,
    Yes, I can login successfully there. The problem also appears to be with the CS Review and Access CS Live panels in InDesign.
    When I initially open the Folio Builder, I get the error dialog "Sign In had failed. [svr.InvalidLogin]". The CS Review and Access CS Live panels also report an internal error.
    This happens in both InDesign CS5 and CS5.5 (both installed on the same computer). Could the CS5.5 and CS5 panels be sharing that info? I haven't uninstalled/reinstalled the panels from CS5, just from CS5.5, which might explain the error, if I need to also uninstall the CS5 panels/extensions.
    Thanks,
    Jason

  • Restoring iOS devices and app login credentials

    Mostly curious here: I have about 50 apps on my iPhone.  About 20 of these apps require login credentials (e.g., Twitter).
    I have to restore my iPhone periodically due to syncing issues with iTunes (that's another story).  When I do the restore, I am restoring from an iCloud backup.  My backups are encrypted.
    When the restore is complete, I've noticed that I can use some of the apps without having to re-enter the app-specific login credentials.  I guess iCloud was able to back up the credentials and restore them for these apps.   But for most apps, I find that I have to re-enter the login credentials in order to use the app.  For these apps, it seems that iCloud did not back up the credentials.
    It's tedious re-entering login credentials for a number of apps, so I'd like to understand how iCloud is supposed to work.  Why does iCloud restore some app login credentials and not others?  Is there a setting somewhere that tells iCloud whether to backup (and restore) app-specific credentials?  Thx
    FYI that I do not use iOS Keychain, I have it turned off.

    mfewings,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Invalid login credentials when install oracle xe

    Hi friends,
    I installed oracle xe version 10.2.0.1.0 correctly, but when i tried to login to adminstration via
    http://localhost:8080/apex
    with sys or system and the password (which i have given during the /etc/init.d/oracle-xe configure)
    It says invalid login credentials
    Please Help me out
    Thanks

    Had same login credentials problem today (and pwd was spelt as it always is). No way was I getting in via frontend or SqlPlus or using any online tip.
    Deinstalled and reinstalled several times according to instructions. Note that ¨/etc/init.d/oracle-xe configure¨ doesn´t re-run unless you update ¨/etc/default/oracle-xe¨ file with ¨CONFIGURE_RUN=false¨
    Now I am into a whole host of connection problems and the database service does not start. Any ideas?
    Listener status:
    root@II-laptop1:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server# lsnrctl status
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 22-AUG-2007 17:06:11
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 22-AUG-2007 16:53:34
    Uptime 0 days 0 hr. 12 min. 36 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Default Service XE
    Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
    Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=II-laptop1)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    Listener logfile:
    Started with pid=8156
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=II-laptop1)(PORT=1521)))
    Listener completed notification to CRS on start
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    22-AUG-2007 16:23:12 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=II-laptop1)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
    22-AUG-2007 16:28:51 * (CONNECT_DATA=(SID=XE)(CID=(PROGRAM=sqlplus)(HOST=II-laptop1)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=59109)) * establish * XE * 12505
    TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
    22-AUG-2007 16:37:51 * ping * 0
    22-AUG-2007 16:38:16 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=II-laptop1)(USER=oracle))(COMMAND=services)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * services * 0
    listener.ora:
    LISTENER =
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    # SID_LIST_<lsnr>
    # List of services the listener knows about and can connect
    # clients to. There is no default. See the Net8 Administrator's
    # Guide for more information.
    SID_LIST_LISTENER=
    (SID_LIST=
    (SID_DESC=
    (SID_NAME=PLSExtProc)
    (ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
    (PROGRAM = extproc)
    DEFAULT_SERVICE_LISTENER = (XE)
    tnsnames.ora:
    XE= (DESCRIPTION =
    (ADDRESS_LIST=
    (ADDRESS=
    (PROTOCOL=tcp)
    (HOST=127.0.0.1)
    (PORT=1521)))
    (CONNECT_DATA=
    (SID=XE)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    Any help would be greatly appreciated, thanks.

  • Problem with Restricted Recruiter Requisition Status Change Approval Proces

    Hello,
    Our company is having a problem with Recruiters recieving any approval notifications for requisitions where the status change is performed by someone logged on as a Restricted Recruiter.  The approval notification never appears in the Recruiters approval page.  The Restricted Recruiter is able to submit the request without any problems.
    I was hoping that someone could help point me in the right direction so that I may begin troubleshooting this.
    Thanks for your assistance.
    Ryan

    I have been doing some digging on this matter on E-Recruiting workflow and have discovered transaction SWI2_FREQ (Work Items per Task), very useful.  Upon running this utility I found 8 pending approval request tasks.  I double clicked on the task to show the workflow status of each task.
    I double clicked on one of the request for status change tasks for a requisition which took me to the approval request for status change of Req ########.  Here I clicked on the activities tab selected the activities tab, selected the activity Approval request for status change of Requisition ######## then clicked on the execute icon.
    Doing this opened up a new web browser and prompted me to login.  Using the correct login credentials for this environment I click the login button and promptly recieve the error message...
    Error in Web service execution
    E:SWF_HTTP:050 TS51807979
    At this point I am unsure of where to go...
    Any help would be appreciated.
    Ryan

  • Invalid login credentials after upgrading to 3.0.1

    I have upgraded our apex2.1 version to 3.0.1. When trying to login for the first time I entered my database user name in the workspace field and enter my database user name and password as per upgrade instructions. However, all I get is the error 'Invalid login credentials'. The upgrade instructions do not mention any additionals action steps that must be taken. Can anyone please advise how to solve this problem.
    Thanks, Richard

    I had the same problem and tried about everything with no success, until ...
    I changed the ADMIN password using the apxxepwd.sql script (can be found in the root of the 3.0.1 apex directory). Run this script under sqlplus as "sys/password as sysdba" and enter twice the ADMIN password when prompted for '&1'. Login on http://localhost:8080/apex/apex_admin, you'll be prompted to change the password. Change the password (may be the same as the old one) and now you can finally login as ADMIN.
    I did this on APEX 3.0.1 on a Oracle EXPRESS 10.2.0.1.0 on Windows Vista, and suppose this must work on other platforms too.

  • Htmldb login credentials invalid

    Hi,
    this is what i did. i backed up the 3 htmldb schemas long back. and now i imported the shemas into my new target database. i installed the http server in my win xp system connecting to my target database and when i try to login into the following pages
    http://localhost:7777/pls/htmldb and
    http://localhost:7777/pls/htmldb/htmldb_admin
    i get error saying login credentials invalid
    i am not able to login for both INTERNAL workspace as well as for the workspace that i created before.
    how can i reset the login and be able to login.
    i am not sure whether this error is because of password obfuscation.
    i am copying my marvel.conf file below, please have a look at it.
    Alias /i/ C:/oracle/product/10.2.0/http_1/htmldb/images/
    <Location /pls/htmldb>
    Order deny,allow
    PlsqlDocumentPath docs
    AllowOverride None
    PlsqlDocumentProcedure wwv_flow_file_manager.process_download
    PlsqlDatabaseConnectString localhost:orcl ServiceNameFormat
    PlsqlNLSLanguage AMERICAN_AMERICA.WE8MSWIN1252
    PlsqlAuthenticationMode Basic
    SetHandler pls_handler
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
    PlsqlDefaultPage htmldb
    PlsqlDatabasePassword @BYLvtjinyJPWqEnRMD9fYtI=
    Allow from all
    </Location>
    Can someone help me solve this problem.
    Thanks,
    Philip.

    zvika--
    i gave you our email address yesterday when i responded to your post at...
    can't login to htmldb
    ...so i'm not sure why you're asking for it again. anyhow, i see your email now and will respond in a bit.
    regards,
    raj

  • Invalid Login Credentials  after a brand new install of APEX 2.2

    I'm trying to install APEX2.2 for the first time to see what it can do.
    I have followed the install document.
    When I got ot here, http://localhost:7777/pls/htmldb
    It requests a workspace, username, password.
    back to the documentation, it states use http://localhost:7777/pls/htmldb/apex_admin
    to create your workspace. And to sign in as admin, and the password passed into @apexins.sql When I try that, it results in the error message "Invalid Login Credentials" The documentation does not describe anything about that!
    Please help
    Thanks,
    Jason

    Joel,
    I had a cut and paste error in my last posting, I actually ran this:
    alter user FLOWS_020200 account unlock;
    connect FLOWS_020200/apex
    begin
    wwv_flow_api.set_security_group_id(p_security_group_id=>10);
    wwv_flow_fnd_user_api.create_fnd_user(
    p_user_name => 'admin2',
    p_email_address => '[email protected]',
    p_web_password => 'admin2') ;
    end;
    alter user FLOWS_020200 account unlock;
    I have a thought on why Ben and I both had this same "Invalid Login Credentials" issue. In my case it certainly wasn't because of any special characters in the password. I used apex as a password.
    From reading Ben's post I see we both first had a problem with the images directory. Sounds like Ben had the same issue I had. Which was in the marvel.conf I first entered this
    Alias /i/ "C:\oracle\product\10.2.0\db_as\Apache\Apache\images"
    instead of this:
    Alias /i/ "C:\oracle\product\10.2.0\db_as\Apache\Apache\images/"
    This caused my http://localhost:7777/pls/htmldb URL to paritially work. I'm thinking that may be what caused the "Invalid Login Credentials" once I made the Alias adjustment.
    Thanks,
    Jason

  • Problem with Path Managed property in alternate zones - also we have identified problem with Product catalog in alt zones

    Hi All,
    I'll start "one step back". Note we have resolved this issue but it is worth mentioning:
    Yesterday we set up the product catalog. We were having a lot of inexplicable problems with it initially. After much troubleshooting, we found that it was because we were browsing the SharePoint site via the "Internet Zone" rather than the "Default
    Zone" when we "Connected" our site to the product catalog. Issues experienced:
    1) "Catalog Item URL Format" displayed error "Properties <Managed Property> specified by the shared catalog could not be found in the search schema" when attempting to connect to the catalog, despite that managed property being
    configured correctly. The catalog would connect despite the error, and the navigation worked fine.
    2) The search Result Source for the catalog would not return any results. Configuring the query and selecting "Advanced Mode" would show SPSiteURL:http://externalURL.domain.com. Changing SPSiteURL manually to
    http://InternalURL resulted in results being returned as expected.
    After much troubleshooting, we found that if were browsing SharePoint using the default zone (http://InternalURL) when we connected the Product Catalog, the result source then worked properly (internally and externally).
    Ok, so now onto our current problem:
    The Product Catalog appeared to be working properly (internally and externally) after figuring out that we needed to connect it from the Default Zone. However, we have found a remaining glitch, which doesn't appear to be Product-Catalog-specific. Consider
    the following scenario:
    1) We click a category in our Product Catalog, such as Electronics
    2) A list of our electronic devices are presented via the "Category" display page
    3) If we click on a specific item, a different URL is returned internally vs externally. We only get the friendly managed navigation URL when browsing via the Default zone. And of course totally different pages load based on which URL you get.
    Internal (when browsing via Default zone):
    http://InternalURL/catalog/PRODUCT-CATEGORY/PRODUCT-NAME
    External (when browsing via Internet zone):
    http://ExternalURL.domain.com/catalog/Lists/Products/DispForm.aspx?ID=1
    We have reviewed the display template, and the "Path" managed property is simply being used to render the link. Furthermore, we have configured the Content Search web part's "Property Mappings" to show the "Path" MP, and it
    displays the same (wrong) result externally.
    This tells us that the Path MP is not correctly rendering "Friendly URLs" when using managed navigation.
    Any help/ideas?
    Our environment:
    SharePoint Version: 15.0.4667.1000
    Default Zone: http://InternalURL
    Internet Zone: http://ExternalURL.domain.com
    We are NOT using host named site collections
    We ARE crawling the Default zone URL in our content source
    Thanks,
    Tommy

    Hi,
    We have now also observed the same issue with a Managed Property of type “Hyperlink/Picture”. The picture returns the wrong URL externally.
    This post describes the same issue, however the poster found that setting UseAAMMapping=True doesn’t work in 2013:
    http://sharepoint.stackexchange.com/questions/104806/set-the-useaammapping-property-of-a-managedproperty-object-map-an-url-of-a-h
    We checked, and our Picture MP had UseAAMMapping=False. We set it to True, did a full crawl, and see no change in behavior. Path already had UseAAMMapping=True.
    More info:
    http://macslui.blogspot.com/2013/02/sharepoint-2010-problem-in-image-result.html
    https://camerondwyer.wordpress.com/2014/08/04/beware-sharepoint-2013-search-results-and-the-listurl-property/#comment-2606
    Thanks,
    Tommy

  • Reusing login credentials with multiple wars

    I have 2 web applications (war files) that are deployed to a single managed server. Both web applications use the weblogic security realm for authentication (configured via Security Realm -> Providers) with the same provider. This means that both applications have the same set of users.
    The first application implements a simple web service (using JAX-WS) that provides 3 or 4 functions.
    The second application is a UI that provides inventory operations (saved to a database) and additionally calls functions from the first web service application.
    I would like the following to happen:
    1 - User logs into the UI application
    2 - User performs an action that calls the web service application
    3 - The UI application uses the login credentials from step 1 to login to the web service application
    4 - The web service application executes the function with the user credentials from step 1
    The reason I would like this is that the web service application has an audit trail of who called the function.
    I have a work around but it is not acceptable, which is to configure a username/password in the UI. The issue is that the web service function is always called with the configured user, regardless of who logs in from step 1.
    Anyone have any ideas on how to deal with this problem?
    Does SSO help in this case?
    Is there a way to reuse the session?

    While logged in as User B, open Keychain Access. Find the password entry for connecting to the mini and delete it.
    Then, try to log in again. User B likely used User A's login info at some point, maybe testing, to connect to the mini, so those credentials were saved in the keychain.

  • EssBase: Login fails due to invalid login credentials

    I am currently running Hyperion System Planning 9, authenticating users through my LDAP server and am having a problem creating new users. I have gone through what I believe are the steps I need to take and have created my users but now when they try to login to EssBase, through the excel add-in, I get this message: "Login fails due to invalid login credentials"
    I have searched the forums and the Essbase knowledge base and have come up empty. The only thing I have found is this:
    "You just need to provision your shared services user with access to Essbase. Right-click on your user, select provision and then give them the required Essbase rights."
    I have provisioned my users several times and made sure that they are added to the correct groups but they still can't log in.
    Has anyone had this issue before?
    Thanks,
    J

    Another point that you need verify, the service sequence:
    1. Start the analytic Services
    2. Star analytic Administration services.
    regards,
    Wallace

  • Using login credentials from the first page

    Hi guys hopw one of you will help me!!
    I a jsp page which takes the username and password.(this is login.jsp)
    If the login is successful the page enters into another jsp which has a list of what the user wants to do.
    Everything is working fine at tht moment.
    But my major concern is say if i give the following ur to login:
    http://localhost:8000.login.jsp
    and enter the username and password.After succesfully logging in I have another jsp(register.jsp)
    with the following functions:
    Delete user
    create user
    The problem is if i give the following address in my browser:
    http://localhost:8000/success.jsp directly this page is being displayed without checking for the login credentials.
    Is there a way where i can check the username and password before the page is being displayed.(remeber I dont have username and password text boxes in each page).
    Thanx in advance.

    Yes you can do this search the forums with the search bar to the left looking for login routines and session variables.
    You put the result of your loging routine (pass or fail) into a session variable. All protected pages then check this session variable, and redirect to the login page if it is not correct.
    Search for session variables.

  • Restart Admin Login Credentials in Apex 4.0 & Oracle 11gr2

    Hi all,
    We face a major issue. We are unable to connect our admin account for some unknown reason. We keep receiving the following message "Invalid Login Credentials". We tried to change the admin credentials with sqlplus.
    We tried the usual procedure "apxchpwd" successfully, but we still cannot log in.
    We then tried to create a new admin2 account with the following pl/sql block.
    SQL> connect APEX_030200 as sysdba
    Enter password:
    Connected.
    SQL> begin
    2 wwv_flow_api.set_security_group_id(p_security_group_id=>10);
    3 wwv_flow_fnd_user_api.create_fnd_user(
    4 p_user_name => 'admin2',
    5 p_email_address => '[email protected]',
    6 p_web_password => 'admin2') ;
    7 end;
    8 .
    SQL> /
    PL/SQL procedure successfully completed.
    SQL> commit
    2
    SQL> commit;
    Commit complete.
    SQL> alter user APEX_030200 account lock;
    User altered.
    SQL> quit
    We cannot connect with either admin & admin2.
    Any good idea?
    Roger

    Hi,
    I'm not expert on this area, sorry.
    I would check what like FLOW% and APEX% users there is in database.
    Also query DBA_REGISTRY what is current/valid APEX version.
    Then try again with correct APEX versions scripts reset ADMIN password.
    Regards,
    Jari
    My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
    Twitter: http://www.twitter.com/jariolai

Maybe you are looking for

  • Down Payment Request at Header Level of PO

    Dear Friends We want to create Down Payment Request and subsequently the Down Payment at Purchase Order Header Level. We are looking for a standard solution without any Custom Development. While creating a Down Payment Request (F-47) the system does

  • Account Security Team number

    I need the number for the Account Security Team, but the number for New Zealand is wrong. Doed any one know it?

  • Deploying application on localhost.

    Hi, Trying to deploy the first application from "Go and Create". In sapmmc I see that Message Server and Enqueue Server are running. Moreover in Window->Preference->SAP J2EE Engine on right panel, I have selected the "SAP J2EE engine is installed on

  • Airport Connects but has Self-Assigned IP address and no internet

    All right Apple this is some Bull#@$% I own 3 Apple units One is a MacBook Pro, one is a Macbook and the other is a G5 Dual processor tower. The MacBook and Tower are using OS X 10.5.5 and the MacBook Pro has OS X 10.4.11. Ok here is my problem all o

  • Changing ink cartridge in my new Envy 5530 e-all in one printer

    Just bought a new Envy printer.  I feel stupid but I don't know how to open it to replace the ink cartridge.  The manual that came with it does not show this.