Problem in query after the upgrade to BI7.0

The values which were zeros in the workbook in 3.x version is now showing as blank in the BI7.0.
The query uses calculated key figures and structures to report the required figures.
I tried looking at the properties of this key figure and everything looks similar .
Pl can anyone help as why is this putting a blank instead of a zero
thanks in advance

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • Problems in EP after the upgrade of ECC 5 to ECC 6

    Hi all,
    Currently in my company we are using EP 7 and with back end  ECC5 . we implemented SSO using Logon ticket , creted System objects, transactional iviews and RFC's Web dynpro Java applications. Now we got a requirement to upgrade ECC 5 to ECC6. if the upgrade is done, do i need to re-implement the SSO ,System objects and re-import RFC  for WDJ applications.
    what are the prerequsites i need to check form the EP side before upgradation. and after what are the things i need to take care after  upgradation
    Thanks
    Rajeev.

    Rajeev,
         I have installed and upgraded ECC5.0 and ECC6.0 in EP7 before. Here are my thoughts assuming you RFC's are not part of any SAP delivered Web Dynpro JAva application (for example ESS/MSS):
           1. Ensure that the upgrade transfers the portal certificate from the ECC5.0 system to the ECC6.0 system by checking it in transaction SSOTRUST2. Also checking that the cert is added to each clients ACL that you need to SSO to.
           2. Each System in the portal will need to point to the new host name if there is one, otherwise, they will be ok.
           3. If your custom web dynpro java applications are using SAP Delivered RFC, then they need to be re-imported. Its possible that some of the code could break because the Import/Export/Table parameters are different.
            4. If you RFC are custom, then you should not have to re-import them.
           5. The transactional iview should be fine.
           6. Test the JCOs that your RFC's are using by going in the portal to Content Administrator --> Web Dynpro --> Click on "Maintain JCO Destinations" and click the "Test" link on each Meta and Model JCO that your RFC's are using. If your not sure which ones they use, find you "Web Dynpro" application in Content Administrator --> Web Dynpro --> Deployed Content. Click on the application, in the right hadn content screen will appear four tabs, click on JCO connections and this will tell you which JCO connectors need to be tested to ensure SSO is still working. Note, the "Meta" Jcos use a username/password, not SSO.
           IF you are implementing ESS/MSS then there is alot more work to do on the portal side.
    Those are just some of my thoughts, it should not be too bad on the EP7.0 side as long as your Web Dynpro Java applications are custom and not SAP Delivered.
    Regards,
    Tom

  • Why the wifi doesn't work after the upgrade to iOS 5?

    The problem is that after the upgrade to iOS 5 the wifi doesn't work. I mean, iPad is connected to the wifi but not to the internet and also the connection on the other device doesn't work. So I had to turn off the router and then turn it on.

    Try a hard reset first to see if that does any good.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    If no luck with that, you'll need to manually connect your iPod to your iTUnes library in recovery mode using the instructions in the Apple support document below. Doing so will allow you to bypass the passcode and restore the iPod.
    iOS: Unable to update or restore
    B-rock

  • When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
    Do a reset
    restore with back up and if required as new

  • Upgrade problems - files missing in site after the upgrade

    gurus,
    i upgraded the webdb 2.2 to portal 3.0. when i went to the portal site, i found that in one folder some of the documents were missing. what i mean by the missing is, the document title was present in the folder but not as a link. it was there as a static text. under normal circumstances the user would click the link and open up the link (can be anything *.doc, *.pdf, *.xls etc.) but, i could not do so because there was static text instead of link.
    has anyone had a similar problem ?
    pls reply.
    thanx a lot
    null

    Hi,
    I am experiencing the same problems, some of the items are inacccessible, the path to these items are weird after the upgrade to portal 306.
    Here is an example:
    The path of an item may look like
    /folder/rootfolder/rootfolder/rootfoler/market/summary.doc
    there are so many rootfolders out there, assume rootfolder is the content area name.
    If I manually remove these redundant rootfolders, I can load these items individually.

  • Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2

    Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
    After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
    - We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
    After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
    We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
    but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
    One more issue we observed is
    - Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
    I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
    Please let me know if you have any idea..Thanks!

    well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
    This is how i did the cleanup before rerun root.sh
    /u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force

  • Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

    Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    See:
    * [[Troubleshooting extensions and themes]]

  • Syntax problem After the Upgrade to SCM 7.0

    We are facing one problem during the upgrade process in the sandbox environment.
    After the upgrade we have completed the SPAU corrections ,while doing the SPAU corrections we found that one function module is not in active mode. We have checked the syntax,problem is there. we have tried to retrieve to the older version. But there are some notes were implemented during the 4.1 version. Those notes are now appearing in the SPAU with question mark.
    We have reverted all the notes but still the code is having syntax problem and the code is in the 4.1 version only.
    Please tell me how to solve it...
    Moderator message - Welcome to SCN.
    But
    Moderator message - Cross post locked(please pick one forum or the other)
    Edited by: Rob Burbank on Nov 3, 2009 12:03 PM

    Hello Bouchards,
    Thank you for the question.  You can find Frequent Locations under Settings > Privacy > Location Services > System Services:
    You can find more information at the following link:
    iOS 7: Understanding Location Services
    http://support.apple.com/kb/HT5594
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problems happens to a lot fo friends after the upgrade! Is it possible to remove the problem?? Thanks. Mauro, Italy.

    We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problem happens t a lot of friends of mine after the upgrade. Is it possible to remove the problem??? Thanx!

    We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problem happens t a lot of friends of mine after the upgrade. Is it possible to remove the problem??? Thanx!

  • Authroization issue after the Upgrade for Multiprovider

    Hello Experts,
    After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the ID.
    The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
    In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
    This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
    Can anyone give me any idea as to how to solve this issue?
    Many thanks in Advance..
    Thanks
    Raman..

    Hi,
    Look at this link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a07122ae-8216-2a10-c9a5-996717a0648b
    Hope it helps

  • Phone and Contacts APP not working after the upgrade 4.01 from 4.0

    Dear all
    after the upgrade to 4.01 my iphone stop to operate the phone and the contacts app
    when i open phone or contacts the app close(crash) after 1 sec.
    When i connect to the mac i have the following message from itunes:
    "iTunes could not sync to the iPhone"Christos" because contacts are being synced over-the-air."
    Trying to open and change the settings at: mail, contacts, calendar but also crash
    Please help
    Thanks for your support

    This happened to me after I upgraded to 4.0. While the iPhone update offers some great new features it has really done a number on some very basic functions and overall operation.
    I am no longer able to use the contacts app to place calls. I can pull up my contact list but when I select an individual contact, the phone seems to freeze for a second and then crashes. (It might be worth mentioning that I use Exchange to sync my contacts.) While the contacts are all on the phone, I can't access actual contact information for each individual.
    I'm also experiencing random freezes, touchscreen delays, etc.
    I can deal with some minor bugs but not being able to use your contacts to place calls is a huge problem.

  • Can we deletete the eps/in directory after the upgrade

    Gurus ,
      we are in the process of upgrading our support packages through SAINT . we are using ECC6.0 version on Oracle AIX 64 bit .
    hence for applying all the add-ons we load it from front end to \eps\in directory via SAINT  .
    But my doubt is ,
    - can we manually delete the eps\in directory after the upgrade is over  ?  because each add on are around 145 mb . and i fear accumulation of those will cause problem
    -How to find the space available in eps\in directory from the GUI ?

    Hi,
    You can safely delete files from EPS/in after you install them to the system, they will be in the Database so this files are not needed  any more. In fact even if they are ther, you won´t see any new SP or Add On using SAINT & SPAM unless you copy new versions to EPS/in directory.

  • WD ALV Issue after the upgrade

    Hi,
    We have upgraded the SAP ECC 6.0 systems basis component SAP BASIS 700 from support pack 10 to 20.
    After the upgrade webdynpro ABAP ALV table rows are not getting selected when we click on the rows, But it is getting selected when we we use CNTRL+Click.
    I would really appreciate if you can provide me a note or route cause for this issue.
    Thanks
    Basava

    Hi Jawahar,
    Below is my suggestion regarding your query:
    Edit existing Job server and update the details regarding Local reporsitory and save it.
    Now try to map the same job server in scheduled jobs and check it was working or not
    Or Else
    Create new Job server and assign it to local repository.
    In this case you have to update your all real time & batch Job configuration.
    Thanks,
    Daya

  • I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

    I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
    People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
    Sorry for my english, i am from Russia.

    I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
    It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

  • Itunes just won't start after the upgrade

    I've upgraded my itunes, and done all the double checks I've found on this site. My itunes just will not start after the upgrade. It's frustrating to say the least because I can't even access my libary or edit my ipod. I've tried everything including uninstalling and reinstalling.. please help! I wanted to put my audio books on my ipod for a roadtrip tomorrow!

    Thanks Katrina. I was able to find what I needed through the link that you provided.
    To those that are having this problem, here's what I did to fix this issue:
    +If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
    +1. Open AirPort Utility.+
    +2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
    +3. Select the specific firmware version you require.+
    +4. Click Download.+
    +5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
    +6. Choose Base Station > Upload Firmware.+
    +7. Select a firmware version and click OK.+
    +An important note about installing firmware+
    +After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
    http://support.apple.com/kb/HT1218
    I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
    All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

Maybe you are looking for

  • Iphone 3G no longer receiving photos on text message board

    Have plenty of space available but I can no longer receive photos while texting.  I am able to send photos to any phone. I deleted many photos from pic gallery but photos still will not come to my text message board.  Is there something I may have to

  • Point me to text to speech resolution problem

    I'm running vista 64 bits in french with IE 8 When trying to convert a text to speech, captivate is unable to do so. Thanks' for any input.

  • Lightbox Image issue

    Good afternoon, I have DL and added to my website a gallery. Within the pop up image the Prev, Next and Close.gif images are missing when I click on a image.. I can see them within DW, but not on the pop up window. I do not have a host yet, so everyt

  • Sorting records all except one  and maintaining index

    I have a mysql table with three attributes. att1 | att2 | att3 1 | 0.1 | 0.2 2 | 0.4 | 0.3 3 | 0.2 | 0.1 4 | 0.3 | 0.5 Now through my program, I select one record according to attribute 2. Suppose in this case I select the value 0.2(from att2) and ge

  • My iPad1 Apps won't Update

    My iPad says I have 5 updates. It asks for my apple id..I enter it....it acts like it's going to update..then i get an "Unknown Error Has Occurred".. i reset the iPad...still doesn't want to work...any suggestion? Thanks!