Problem in Query Designer Tool Bar

Hi
In BI 7.0, Query Designer Tool Bar unable to see Table View. Is their any patch problem ?.
Thanks in advance
Mahesh.

OSS note: 1002271.
Reason and Prerequisites
After much discussion we have decided
not to include the table mode in BI 7.0.
Solution
There is (in our opinion) a better alternative to the table view:
Create a query with only one structure and use
Report Designer to design your own table view. This allows you
to arrange the columns and many other
formatting and grouping options as you wish.

Similar Messages

Problem loading Query Designer Add-in

Hi All,
Can anyone please help me on my below issue.
Whenever user is trying to start a new query in Essbase , he is getting below error message. It will not allow user to build a fresh Essbase pull
Problem loading Query Designer Add-in. Workbook Activate,open & close operations may not be fully propogated
Thanks in advance.
Regards
Vishal

Hi Vishal,
1) Try to remove the addin and then add again.(Before doing this close all the excel process from the task Manager)
2) Check weather essexcln.xll and essxleqd.xla are corrupted.

Problem with Query designing

Hi All,
I had created a query and started designing a crystal report.
But after designing the report, i came to know that some infoobjects are missing in the query.
So i went to query designer and added the corresponding infoobjects inorder, they could reflect while designing my crystal report.
But when i have reopened the report the field explorer is not showing the infoobjects which i have added newly.
In crystal reports what is the way to obtain those objects which are newly added to the query.
Even i have refreshed the field explorer many times but still it is not showing the updated objects.
But if i go creating a new report on the same query, there it is showing the added objects as well.
Only for the new report i could able to see the newly added objects in field explorer but not for the old report.
Please let me know the solution for this problem ASAP.
Best Regards
Jiten

Jiten,
i think if you click Database--->Verify Database and also try Set datasource location -
>Update.
this should do the trick.
Regards
Jehanzeb

Problem Bex Query Designer

Hello,
Our BI guys are facing a problem with the too - Bex Query Designer.
They want us to update the version of the Query Designer.
Can you please guide me as how do I obtain the latest version of Bex Query Designer.
My current version is - release 2004s SUpport pack - 0, revision 418
Thanks.

have a look at this
SAP NW BI BEx Compatibility of MS Operating Systems and Office Products [original link is broken]
Regards,
Ravi

Query in Tool Bar Area Searching option.

Hi All,
There is a tool bar Searching iView with us.But when any user searches through it, the search option is working fine.But the results shows files with open folder and details option (as we do not want some user go inside details option and change the permissions settings of that file).Can anyone tell me how can we remove open folder and details options??
Regards,
Udit

Hi,
The UI Command Group resposible to show Open Folder, See Also and Details Commands is SearchSingleItemGroup.
So open it and remove the browse_from_here and SingleDetailsGroup(expanded) UICommands.
choose System Administration --> System Configiuration --> KM --> Content Management --> User Interface --> Commands --> UI Command Group.
http://help.sap.com/saphelp_nw70/helpdata/en/9d/233f989a5ba64fa44ed6e0823286ee/frameset.htm
Greetings,
Praveen Gudapati

Problem in query designer

hi all,
i am trying to execute the query in query designer it opening a portal screen and it asking for user id and password
after entering user id and password i can able to see the loading icon finally i getting the blank screen ..
instead of selection sceen can any one help on this...
Thanks
siva R

Siva,
This is your Portal issue then Contact Basis team for this or Try these:
1. IE security trusted site settings.
2. Have basis restart the server and login.
Strange things like this occur when the DB is full or DB log is full.
Check if your database is not full, that means you should check the LogArea and DataArea.
If any of them are full, then your jstart fails to start.
If LogArea full -- Set the Log Automatic Overwrite to ON
If DataArea full -- Add new disk volume.
& follow this thread:
/message/5271702#5271702 [original link is broken]
~AK

Currency Conversion problem in query designer

Hi,
A requirement has come that infoobject which contain multiple currency type, need to convert into a single currency type in Bex reporting as user want to see only one currency value in report.
There are three keyfigures refering different calenders for conversion. For examle . GR amount is based on GR date, IR amount is based on IR date and PO amount is based on Doc date. Query is build based on a infoset.
I am doing following steps to achieve the task::
1. In TCODE - RSCUR, created three Currency Conversion Type each for GR, IR and PO and each one refering different 0calday calender
2. Defined exchange Rate Type as "M"
3. Currency Tab -> Source Currency = "Source Currency from data Record"
    Target Currency -> Fixed Target Currency = "USD"
4. Time Ref. Tab -> Fixed Time ref. = "Current Date"
    Variable time reference = "To the exact day"
    Special InfoObject = <InfoObject name>
5. In query designer, Key figure property for GR amount -> Conversion -> Conversion type = <Name of Currency Conversion Type which defined in RSCUR>
6. Repeated the same for IR Amount and PO Amount key figure
While saving, getting following error::
*Cannot apply Currency translation type <Currency type name> in Infocube <Infoset name>. *
Diagnosis
You tried to translate a query element with the currency translation type <Currency type name>. The translation type <Currency type name>, however, has variable time reference or variable target currency relevant to characteristic Document Date. Characteristic Document Date is also not available in InfoProvider <Infoset name> and it references either none or more than one characteristic () of the InfoProvider for Document Date, or Document Date is not a base characteristic.
System Response
Procedure
Adjust the query definition or create a special currency translation type for one of the characteristics .
Please help!
Please note that there are three key figures which need conversion using different calenders.
Sanjiv

Hello,
I have done the same what you said, but same error still showing....
I also tried to change from "Special InfoObject" to Infoset level and it works with one KF. Since all three KF are under one Infoset and there is limitation that if Currency Conversion Type is defined on Infoset level then only one KF will be assigned for a Infoset where as I am using three KFs with three relevant time characteristic.
Any suggesion from others?
Sanjiv

Problem with query designer

I finished to configuration of query desginer but my co-worker is in the BI system with these application Bex Web application and she got this message:
Error in Java system There are the error unknowing with comunication portal.
So I found this message in the default tracer of BI system
1.- Error occurred while initially starting application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws:Application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws cannot be started. Reason: it has hard reference to resource com.sap.ip.bi.base with type application, which is not active on the server
2.- Error occurred while initially starting application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws:Application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws cannot be started. Reason: it has hard reference to resource com.sap.ip.bi.base with type application, which is not active on the server at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:580)
at... [see details]
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws cannot be started. Reason: it has hard reference to resource com.sap.ip.bi.base with type application, which is not active on the server.
Any suggestion for this
Regards
Danny

Hi Danny,
Does the problem only happen when you try and print or print preview something, i.e when you call application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws? Can you please check with the support desktool if every thing is configured correctly as per the SAP note 937697, there should be no errors or warnings returned by the Tool if you have configured everything correctly, if you get errors or warnings please try and correct them based on the suggestions returned in the error or warning messages. Please also check if the note 934276 could be relevant in your case.
Best Regards,
Des

Problem with query design mode?

hi friends,
how are you, i created query, i have customer and material and price&quantity.
i have some values corresponding objects.
i click design mode and inserted drop box for material , and again exit design mode, i got drop box with my material.
in drop mox i have 5 material. when i select material 3 the query is not showning values for material 3 . its showing all values . what can i do for this.
regards
suneel.

Judging from the error message, I'd suspect that IIS is trying to use some authentication service for the user. Are you using something like a "single sign-on" (Windows NT native authentication, NDS authentication, etc.?
As a test, you could try downloading the Oracle OLEDB driver to see if that solves the problem.
Unfortunately, nothing jumps out at me here as obviously wrong or an obvious path to getting this working.
Justin Cave
ODBC Development

*Problem in Query Designer using Infoset

Hi,
I'm having an Infoset that I'm creating a quey against.
The query works fine with a few characteristics and keyfigures.
But sometimes i got the following error messages when adding another characteristics or keyfigure:
Operand data type varchar is invalid for sum opera tor.Operand data type varchar is invalid for sum o perator.
Notification Number RSQBW 000
Error when generating the SQL statement
Notification Number RSQBW 804
DBMAN 305
BRAIN 289
Can anyone help me, please?
Thanks,
Ingmarie Gärdströ

It sounds as if the Key Figure that you added to your query has been defined underlying RDBMS (e.g. Oracle) for your BW system as an alphanumeric (VARCHAR) and since the data isn't defined as being numeric, it can't sum the data. This might also be caused by an known problem the BW application and there may be an OSS Note, or more than one, that resolves this issue.

Problem in query designing

Hi all,
I have to query to find No of open cases, No of closed cases,
Average of open cases, Average age of closed cases,
Maximum of closed cases for a particulat Current assigne(char).
my desired output is as follows.
CurAssigne Noofopencases Noofclosed cases Avgage(opencases) Max(open)
CurAssigne1 10 20 8 9
CurAssigne1 18 22 9 10
My cube is consists of.
4 Dimensions & 4 key figures
4Dimensions are listed below.
Business Partner{currentassigne, previousassigne,acmanager}
createdon{createdonmonth,createdonday,createdtime}
closedon{closedmonth,closedday,closedtime}
Status{Latest case status-(2 status are available for each case - open,close)}
above the objects between {} are chars.
4 keys are listed below.
no of cases.
age
first response time
research time.
Please help me to design this query friends..
It's very urgent friends please help me.

Hi,
U can keep as row
In key figure u can create 2 restricted key figures 1. for open case 2 .closed case
For max u can create a new key figure infoobect where u can put ithe aggregaion level as max and map it to open case field. it will solve u r max open case or u can use standard MAX using calcualated key figure..
Average opencase its confusing , its for all CurAssigne or something else.
Thanks,
Debasish

Problem in removing Babylon tool bar and putting Firefox back the way it was

Okay here it is. I accidentally downloaded Babylon onto my computer. It overrode the Fire Fox search on Mozilla and it for some reason will not allow me to Google anything. I now get a 404 NOT FOUND if I try to get to the Google site.
I just want to know how to put it back, restore it to what it was.

Remove the program. http://support.babylon.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=79
Remove the Toolbar add-on. http://support.babylon.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=78
Reset the homepage setting. http://support.babylon.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=77
Reply

The Design Tool is not appearing in webdynpro(ECC 6.0)?

hi friends,
when i tried to create a webdynpro, the design tool bar not appearing when i choose Window .I wat to create like LABEL, TEXTFELD, BUTTON. Is i have to change any settings to appear design tool.
Regards,
shankar.

Hi Shanker,
Large no. of threads (which explains how to solve "the page cannot be displayed " problem) in webdynpro abap forum. So I would suggest that if you have any queries like these, you should post it in the webdynpro abap forum to get quick reponses.
By the way, you can refer these thread:
Re: In the view of Web Dynpro- "Page cannot be displayed screen"
Re: page cannot be displayed in browser
Webdynpro View problem. Layout tab says 'The page cannot be displayed'
dsn error, web page canot be displayed in IE
I hope it helps.
Regards
Arjun

CKF in BEx Query Designer

Hello,
I have following scenario in Query Designer:
There is only one characteristic Material in row and 3 calculated Key figures in column Price (Current Year), Price (Current Year -1), Price (Current Year -2). The User gives the current year as Input Variable. It works so far fine.
Query Output looks like:
MATERIAL | PRICE (CURENT Y) | PRICE (CURRENT Y-1) | PRICE (CURRENT Y-2)
1234 |10|20|--
2345|10||
3456|12|--|23
4653|12|13|14
7564|--|2|5
6452|||8
7362||7|
You can see that at least one value of PRICE Current Year/Current Year-1/Current Year-2 per Material is always filled. All Prices are in EUR.
Now my requirement is that I have to build a new Calculated Key Figure in Query designer which should calculate the minimum value of PRICE Current Year/Current Year-1/Current Year-2 per Material.
The new Query Output should look like this:
MATERIAL | MINIMUM (PRICE CURRENT Y to CURRENT Y-2)
1234 |10
2345|10
3456|12
4653|12
7564|2
6452|8
7362|7
I have tried to use Mathematic Function MIN but couldnu2019t get success as few cells are empty. So I cannot use function MIN. When I add empty cell with 0 then the minimum value calculates incorrect. It only works when all 3 cells are filled. How I can solve this problem in Query Designer?
Many thanks for the help.
Edited by: Moha Nan on Aug 26, 2011 1:07 PM

Hi Moha Nan,
Try this:
PRICE CURRENT Y *
((PRICE CURRENT Y NE 0) *
((PRICE CURRENT Y-1 NE 0) * (PRICE CURRENT Y < PRICE CURRENT Y-1) + (PRICE CURRENT Y-1 == 0))
((PRICE CURRENT Y-2 NE 0) * (PRICE CURRENT Y < PRICE CURRENT Y-2) + (PRICE CURRENT Y-2 == 0)))
+
PRICE CURRENT Y-1 *
((PRICE CURRENT Y-1 NE 0) *
((PRICE CURRENT Y NE 0) * (PRICE CURRENT Y-1 < PRICE CURRENT Y) + (PRICE CURRENT Y == 0))
((PRICE CURRENT Y-2 NE 0) * (PRICE CURRENT Y-1 < PRICE CURRENT Y-2) + (PRICE CURRENT Y-2 == 0)))
+
PRICE CURRENT Y-2 *
((PRICE CURRENT Y-2 NE 0) *
((PRICE CURRENT Y-1 NE 0) * (PRICE CURRENT Y-2 < PRICE CURRENT Y-1) + (PRICE CURRENT Y-1 == 0))
((PRICE CURRENT Y NE 0) * (PRICE CURRENT Y-2 < PRICE CURRENT Y) + (PRICE CURRENT Y == 0)))
replace the NE with the not equal to sign, the post forum doesn't seem to accept thos signs.
Kind regards,
Alex

Ad-hoc query designer support end?

Hi Colleagues,
We need use Web Query Designer (Ad-hoc Query Designer) tool at BI 7.0 version.
So, we've heard that SAP leaves mantain Web Query Designer tool, could you confirm us it? If it's true which other choice you offer us?
Regards
Raul.

Hi Sabine,
I think I did not fully get what your requirement is, please elaborate on what you want to be displayed. Something general
1. in tab "exception values" you can specify the key figures on which the exceptions are to be applied and assign value ranges to different colors / levels
2. in tab "validity area of exception" you can specify
a) to apply the exception on all or totals only (choicebox), this setting is valid for all characteristics not mentioned in the field below
b) to apply the exception on everything, totals, everything but totals, fixed value, hierarchy level corresponding to a certain characteristic
Best regards,
Björn

Problem in Query Designer Tool Bar

Similar Messages

Maybe you are looking for