Problem in query designer
hi all,
i am trying to execute the query in query designer it opening a portal screen and it asking for user id and password
after entering user id and password i can able to see the loading icon finally i getting the blank screen ..
instead of selection sceen can any one help on this...
Thanks
siva R
Siva,
This is your Portal issue then Contact Basis team for this or Try these:
1. IE security trusted site settings.
2. Have basis restart the server and login.
Strange things like this occur when the DB is full or DB log is full.
Check if your database is not full, that means you should check the LogArea and DataArea.
If any of them are full, then your jstart fails to start.
If LogArea full -- Set the Log Automatic Overwrite to ON
If DataArea full -- Add new disk volume.
& follow this thread:
/message/5271702#5271702 [original link is broken]
~AK
Similar Messages
-
Problem loading Query Designer Add-in
Hi All,
Can anyone please help me on my below issue.
Whenever user is trying to start a new query in Essbase , he is getting below error message. It will not allow user to build a fresh Essbase pull
Problem loading Query Designer Add-in. Workbook Activate,open & close operations may not be fully propogated
Thanks in advance.
Regards
VishalHi Vishal,
1) Try to remove the addin and then add again.(Before doing this close all the excel process from the task Manager)
2) Check weather essexcln.xll and essxleqd.xla are corrupted. -
Problem in Query Designer Tool Bar
Hi
In BI 7.0, Query Designer Tool Bar unable to see Table View. Is their any patch problem ?.
Thanks in advance
Mahesh.OSS note: 1002271.
Reason and Prerequisites
After much discussion we have decided
not to include the table mode in BI 7.0.
Solution
There is (in our opinion) a better alternative to the table view:
Create a query with only one structure and use
Report Designer to design your own table view. This allows you
to arrange the columns and many other
formatting and grouping options as you wish. -
Hi All,
I had created a query and started designing a crystal report.
But after designing the report, i came to know that some infoobjects are missing in the query.
So i went to query designer and added the corresponding infoobjects inorder, they could reflect while designing my crystal report.
But when i have reopened the report the field explorer is not showing the infoobjects which i have added newly.
In crystal reports what is the way to obtain those objects which are newly added to the query.
Even i have refreshed the field explorer many times but still it is not showing the updated objects.
But if i go creating a new report on the same query, there it is showing the added objects as well.
Only for the new report i could able to see the newly added objects in field explorer but not for the old report.
Please let me know the solution for this problem ASAP.
Best Regards
JitenJiten,
i think if you click Database--->Verify Database and also try Set datasource location -
>Update.
this should do the trick.
Regards
Jehanzeb -
Hello,
Our BI guys are facing a problem with the too - Bex Query Designer.
They want us to update the version of the Query Designer.
Can you please guide me as how do I obtain the latest version of Bex Query Designer.
My current version is - release 2004s SUpport pack - 0, revision 418
Thanks.have a look at this
SAP NW BI BEx Compatibility of MS Operating Systems and Office Products [original link is broken]
Regards,
Ravi -
Currency Conversion problem in query designer
Hi,
A requirement has come that infoobject which contain multiple currency type, need to convert into a single currency type in Bex reporting as user want to see only one currency value in report.
There are three keyfigures refering different calenders for conversion. For examle . GR amount is based on GR date, IR amount is based on IR date and PO amount is based on Doc date. Query is build based on a infoset.
I am doing following steps to achieve the task::
1. In TCODE - RSCUR, created three Currency Conversion Type each for GR, IR and PO and each one refering different 0calday calender
2. Defined exchange Rate Type as "M"
3. Currency Tab -> Source Currency = "Source Currency from data Record"
Target Currency -> Fixed Target Currency = "USD"
4. Time Ref. Tab -> Fixed Time ref. = "Current Date"
Variable time reference = "To the exact day"
Special InfoObject = <InfoObject name>
5. In query designer, Key figure property for GR amount -> Conversion -> Conversion type = <Name of Currency Conversion Type which defined in RSCUR>
6. Repeated the same for IR Amount and PO Amount key figure
While saving, getting following error::
*Cannot apply Currency translation type <Currency type name> in Infocube <Infoset name>. *
Diagnosis
You tried to translate a query element with the currency translation type <Currency type name>. The translation type <Currency type name>, however, has variable time reference or variable target currency relevant to characteristic Document Date. Characteristic Document Date is also not available in InfoProvider <Infoset name> and it references either none or more than one characteristic () of the InfoProvider for Document Date, or Document Date is not a base characteristic.
System Response
Procedure
Adjust the query definition or create a special currency translation type for one of the characteristics .
Please help!
Please note that there are three key figures which need conversion using different calenders.
SanjivHello,
I have done the same what you said, but same error still showing....
I also tried to change from "Special InfoObject" to Infoset level and it works with one KF. Since all three KF are under one Infoset and there is limitation that if Currency Conversion Type is defined on Infoset level then only one KF will be assigned for a Infoset where as I am using three KFs with three relevant time characteristic.
Any suggesion from others?
Sanjiv -
Problem with query design mode?
hi friends,
how are you, i created query, i have customer and material and price&quantity.
i have some values corresponding objects.
i click design mode and inserted drop box for material , and again exit design mode, i got drop box with my material.
in drop mox i have 5 material. when i select material 3 the query is not showning values for material 3 . its showing all values . what can i do for this.
regards
suneel.Judging from the error message, I'd suspect that IIS is trying to use some authentication service for the user. Are you using something like a "single sign-on" (Windows NT native authentication, NDS authentication, etc.?
As a test, you could try downloading the Oracle OLEDB driver to see if that solves the problem.
Unfortunately, nothing jumps out at me here as obviously wrong or an obvious path to getting this working.
Justin Cave
ODBC Development -
*Problem in Query Designer using Infoset
Hi,
I'm having an Infoset that I'm creating a quey against.
The query works fine with a few characteristics and keyfigures.
But sometimes i got the following error messages when adding another characteristics or keyfigure:
Operand data type varchar is invalid for sum opera tor.Operand data type varchar is invalid for sum o perator.
Notification Number RSQBW 000
Error when generating the SQL statement
Notification Number RSQBW 804
DBMAN 305
BRAIN 289
Can anyone help me, please?
Thanks,
Ingmarie GärdströIt sounds as if the Key Figure that you added to your query has been defined underlying RDBMS (e.g. Oracle) for your BW system as an alphanumeric (VARCHAR) and since the data isn't defined as being numeric, it can't sum the data. This might also be caused by an known problem the BW application and there may be an OSS Note, or more than one, that resolves this issue.
-
Hi all,
I have to query to find No of open cases, No of closed cases,
Average of open cases, Average age of closed cases,
Maximum of closed cases for a particulat Current assigne(char).
my desired output is as follows.
CurAssigne Noofopencases Noofclosed cases Avgage(opencases) Max(open)
CurAssigne1 10 20 8 9
CurAssigne1 18 22 9 10
My cube is consists of.
4 Dimensions & 4 key figures
4Dimensions are listed below.
Business Partner{currentassigne, previousassigne,acmanager}
createdon{createdonmonth,createdonday,createdtime}
closedon{closedmonth,closedday,closedtime}
Status{Latest case status-(2 status are available for each case - open,close)}
above the objects between {} are chars.
4 keys are listed below.
no of cases.
age
first response time
research time.
Please help me to design this query friends..
It's very urgent friends please help me.Hi,
U can keep as row
In key figure u can create 2 restricted key figures 1. for open case 2 .closed case
For max u can create a new key figure infoobect where u can put ithe aggregaion level as max and map it to open case field. it will solve u r max open case or u can use standard MAX using calcualated key figure..
Average opencase its confusing , its for all CurAssigne or something else.
Thanks,
Debasish -
I finished to configuration of query desginer but my co-worker is in the BI system with these application Bex Web application and she got this message:
Error in Java system There are the error unknowing with comunication portal.
So I found this message in the default tracer of BI system
1.- Error occurred while initially starting application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws:Application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws cannot be started. Reason: it has hard reference to resource com.sap.ip.bi.base with type application, which is not active on the server
2.- Error occurred while initially starting application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws:Application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws cannot be started. Reason: it has hard reference to resource com.sap.ip.bi.base with type application, which is not active on the server at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:580)
at... [see details]
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws cannot be started. Reason: it has hard reference to resource com.sap.ip.bi.base with type application, which is not active on the server.
Any suggestion for this
Regards
DannyHi Danny,
Does the problem only happen when you try and print or print preview something, i.e when you call application sap.com/com.sap.ip.bi.webdynpro.alv.pdf.ws? Can you please check with the support desktool if every thing is configured correctly as per the SAP note 937697, there should be no errors or warnings returned by the Tool if you have configured everything correctly, if you get errors or warnings please try and correct them based on the suggestions returned in the error or warning messages. Please also check if the note 934276 could be relevant in your case.
Best Regards,
Des -
Hello,
I have following scenario in Query Designer:
There is only one characteristic Material in row and 3 calculated Key figures in column Price (Current Year), Price (Current Year -1), Price (Current Year -2). The User gives the current year as Input Variable. It works so far fine.
Query Output looks like:
MATERIAL | PRICE (CURENT Y) | PRICE (CURRENT Y-1) | PRICE (CURRENT Y-2)
1234 |10|20|--
2345|10||
3456|12|--|23
4653|12|13|14
7564|--|2|5
6452|||8
7362||7|
You can see that at least one value of PRICE Current Year/Current Year-1/Current Year-2 per Material is always filled. All Prices are in EUR.
Now my requirement is that I have to build a new Calculated Key Figure in Query designer which should calculate the minimum value of PRICE Current Year/Current Year-1/Current Year-2 per Material.
The new Query Output should look like this:
MATERIAL | MINIMUM (PRICE CURRENT Y to CURRENT Y-2)
1234 |10
2345|10
3456|12
4653|12
7564|2
6452|8
7362|7
I have tried to use Mathematic Function MIN but couldnu2019t get success as few cells are empty. So I cannot use function MIN. When I add empty cell with 0 then the minimum value calculates incorrect. It only works when all 3 cells are filled. How I can solve this problem in Query Designer?
Many thanks for the help.
Edited by: Moha Nan on Aug 26, 2011 1:07 PMHi Moha Nan,
Try this:
PRICE CURRENT Y *
((PRICE CURRENT Y NE 0) *
((PRICE CURRENT Y-1 NE 0) * (PRICE CURRENT Y < PRICE CURRENT Y-1) + (PRICE CURRENT Y-1 == 0))
((PRICE CURRENT Y-2 NE 0) * (PRICE CURRENT Y < PRICE CURRENT Y-2) + (PRICE CURRENT Y-2 == 0)))
+
PRICE CURRENT Y-1 *
((PRICE CURRENT Y-1 NE 0) *
((PRICE CURRENT Y NE 0) * (PRICE CURRENT Y-1 < PRICE CURRENT Y) + (PRICE CURRENT Y == 0))
((PRICE CURRENT Y-2 NE 0) * (PRICE CURRENT Y-1 < PRICE CURRENT Y-2) + (PRICE CURRENT Y-2 == 0)))
+
PRICE CURRENT Y-2 *
((PRICE CURRENT Y-2 NE 0) *
((PRICE CURRENT Y-1 NE 0) * (PRICE CURRENT Y-2 < PRICE CURRENT Y-1) + (PRICE CURRENT Y-1 == 0))
((PRICE CURRENT Y NE 0) * (PRICE CURRENT Y-2 < PRICE CURRENT Y) + (PRICE CURRENT Y == 0)))
replace the NE with the not equal to sign, the post forum doesn't seem to accept thos signs.
Kind regards,
Alex -
Incorrect texts in SAP Query Designer
Hello,
I have problems with incorrect text in SAP Query designer, I work with SAP codepage 1404 and I see all queries correct, but when I want to edit some query with some special character for czech language its problem. Query designer can=t use czech diacritic.
Can you give some advice.
Thanks
:PetrHello !
Thks for your quick reply,
I'm from France sorry for my bed english but i hope u're understanding me, I'm new consultant in BW and like u know woman are not very comfartable with IT so i'm going to ask u 2 others questions about hierarchy and saving query in roles if u don't mind
1) I want to change some hierarchy node position in production system, do i change directly in rsh1 by adding a node to another level ? or i must to change in a file source or ECC system ? if i change just on rsh1, i will lost all i have changed when Info package will be executed (in daily process chain)...? that's right?
2) I have a query already published in rôle, but i have to move it to another one, how can i do that in query designer please?
PS : i can't send you direct message, is it possible to follow me ?
Thks in advance have a nice day ! -
Hi,
I'm trying to debug a configuration problem with query designer when it connects to my BI 7.0 server. Here is the problem:
start - all programs - business explorer - query designer
I then connect to my SAP BI 7.0 system using my personal id that has sap_all sap_new authorities
From the Query designer I select query - open
then I select -
info areas - human resources - personal administration - headcount and personal actions - headcount/change in staffing level
Then Execute ...
My web page opens up with...
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q001&VARIABLE_SCREEN=X&DUMMY=1
For some reason the hostname and port are missing. Does anyone know where this is configured?
Thanks,
LeeBhanhu,
Thanks for the quick response. I am the basis administrator for this server. This system was built by a redirected restore, so I'm trying to figure out where these settings are adjusted. Do you know the profile parameters that would be used in RZ10 or the settings in RSPARAM. I looked in RSPARAM but I did not see where this could be set. Any leads would be helpfull.
Thanks,
Lee -
Problem with Queries Structures in Bex Query Designer and Universe Designer
Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
- (Characteristic Restrictions) Reg Guayana
> (InfoObject) 0Product = 'XXX'
> (InfoObject) 0Country = 'YYY'
- (Characteristic Restrictions) Reg Caracas
> (InfoObject) 0Product = 'AAA'
> (InfoObject) 0Country = 'BBB'
Rows
(Structure) ZSRT_456
(Key Figure) Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure) Net Sale
(Class) ZSRT_123
>(Dimension) ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier -
Dear All,
I am facing the problem in the query designer that when i edit any of the formula in the query it allows me but when i edit it second time , it wont allow me and throws a following exception...
"An unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will be shut down immediately.
Object reference not set to an instance of an object."
and in details of the exception the following comes...
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text
System.NullReferenceException: Object reference not set to an instance of an object.
at com.sap.bi.et.QueryDesigner.QDbPoolEditSelection.Get()
at com.sap.bi.et.QueryDesigner.QDbCommandEditElement.EditFormula(IQDView iSelectedView)
at com.sap.bi.et.QueryDesigner.QDbCommandEditElement.ExecuteCommand()
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.CommandExecute(QDbCommandBase iCommand)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.InitialCommandExecute(QDbCommandBase iCommand)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoExecuteCommandInternal()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.ItemClickedHandler(Object sender, BarItemClickedEventArgs args)
at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.MenuItemClickedHandler(Object iSender, BarItemClickedEventArgs iE)
at Syncfusion.Windows.Forms.Tools.XPMenus.BarManager.OnItemClicked(BarItemClickedEventArgs args)
at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs args)
at com.sap.bi.et.QueryDesigner.QDiBarItem.OnItemClicked(EventArgs args)
at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.ExecuteDoubleclickCommand(ParentBarItem iContextMenu)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.NodeDoubleClickHandler(Object sender, EventArgs e)
at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.ItemDoubleClickHandler(Object sender, EventArgs e)
at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.ItemDoubleClickHandler(Object sender, EventArgs e)
at com.sap.bi.et.QueryDesigner.QDuHeaderTree.OnItemDoubleClick(EventArgs iE)
at com.sap.bi.et.QueryDesigner.QDuHeaderTree.NodeDoubleClickHandler(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnDoubleClick(EventArgs e)
at Syncfusion.Windows.Forms.Tools.TreeViewAdv.OnDoubleClick(EventArgs e)
at com.sap.bi.et.QueryDesigner.QDiTree.OnDoubleClick(EventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at Syncfusion.Windows.Forms.ScrollControl.WmMouseUp(Message& msg)
at Syncfusion.Windows.Forms.ScrollControl.WndProc(Message& msg)
at Syncfusion.Windows.Forms.Tools.TreeViewAdv.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies
mscorlib
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/microsoft.net/framework/v1.1.4322/mscorlib.dll
BExQueryDesignerStarter
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.486
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExQueryDesignerStarter.exe
System
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
BExQueryDesigner
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.486
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExQueryDesigner.DLL
BExCommon
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExCommon.DLL
BExControls
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExControls.DLL
BExCAControls
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExCAControls.DLL
System.Windows.Forms
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.windows.forms/1.0.5000.0__b77a5c561934e089/system.windows.forms.dll
BExCommunication
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExCommunication.DLL
Microsoft.VisualBasic
Assembly Version: 7.0.5000.0
Win32 Version: 7.10.6001.4
CodeBase: file:///c:/windows/assembly/gac/microsoft.visualbasic/7.0.5000.0__b03f5f7f11d50a3a/microsoft.visualbasic.dll
System.Xml
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.xml/1.0.5000.0__b77a5c561934e089/system.xml.dll
8mfr2iet
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
SAP.Connector
Assembly Version: 2.0.0.0
Win32 Version: 2.0.0.23
CodeBase: file:///c:/windows/assembly/gac/sap.connector/2.0.0.0__50436dca5c7f7d23/sap.connector.dll
Interop.SAPLogonCtrl
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Interop.SAPLogonCtrl.DLL
SAP.Connector.Rfc
Assembly Version: 2.0.0.0
Win32 Version: 2.0.0.23
CodeBase: file:///c:/windows/assembly/gac/sap.connector.rfc/2.0.0.0__50436dca5c7f7d23/sap.connector.rfc.dll
BExGeneratedAll
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.123
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExGeneratedAll.DLL
System.Web.Services
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.web.services/1.0.5000.0__b03f5f7f11d50a3a/system.web.services.dll
System.Drawing
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.drawing/1.0.5000.0__b03f5f7f11d50a3a/system.drawing.dll
System.Web
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system.web/1.0.5000.0__b03f5f7f11d50a3a/system.web.dll
nwibr-hj
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
orv3kyon
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
3wroaodz
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
uzyztof1
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
bmpxtf3w
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
BExControls2
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.123
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExControls2.DLL
BExSharedImageList
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExSharedImageList.DLL
System.Runtime.Serialization.Formatters.Soap
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.runtime.serialization.formatters.soap/1.0.5000.0__b03f5f7f11d50a3a/system.runtime.serialization.formatters.soap.dll
BExSelectorAPI
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.202
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExSelectorAPI.DLL
System.Data
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.data/1.0.5000.0__b77a5c561934e089/system.data.dll
BExOpenSaveServices
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.108
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExOpenSaveServices.DLL
Syncfusion.Tools.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Tools.Windows.DLL
Syncfusion.Shared.Base
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Shared.Base.DLL
Syncfusion.Grid.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Grid.Windows.DLL
Syncfusion.Core
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Core.DLL
Syncfusion.Grid.Base
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Grid.Base.DLL
Syncfusion.Shared.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Shared.Windows.DLL
Accessibility
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///c:/windows/assembly/gac/accessibility/1.0.5000.0__b03f5f7f11d50a3a/accessibility.dll
AxInterop.SHDocVw
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/AxInterop.SHDocVw.DLL
Interop.SHDocVw
Assembly Version: 1.1.0.0
Win32 Version: 1.1.0.0
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Interop.SHDocVw.DLL
Syncfusion.Edit.Windows
Assembly Version: 4.401.0.51
Win32 Version: 4.401.0.51
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/Syncfusion.Edit.Windows.DLL
ezadp-o7
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
czxpebds
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
ws48wlef
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
nbphnkyi
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
qmxat26w
Assembly Version: 0.0.0.0
Win32 Version: 1.1.4322.2407
CodeBase: file:///c:/windows/assembly/gac/system/1.0.5000.0__b77a5c561934e089/system.dll
BExFormulaParser
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.122
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExFormulaParser.DLL
RegexAssembly140_0
Assembly Version: 0.0.0.0
Win32 Version: n/a
CodeBase:
System.Design
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.2032
CodeBase: file:///c:/windows/assembly/gac/system.design/1.0.5000.0__b03f5f7f11d50a3a/system.design.dll
BExQueryDesignerFormulaParser
Assembly Version: 7000.0.0.0
Win32 Version: 7005.5.1401.2
CodeBase: file:///C:/Program%20Files/SAP/FrontEnd/Bw/BExQueryDesignerFormulaParser.DLL
JIT Debugging **************
To enable just in time (JIT) debugging, the config file for this
application or machine (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the machine
rather than being handled by this dialog.
Please anybody help me.
NiteshHi,
This is a typical front end issue where you have to look at your GUI patch and front end patch.I recommend you deinstalling your frontend installation as follows:
- Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -
'REMOVE SAP FRONTEND'
- Install the newest frontend and GUI patch and check the installation with sapbexc.xla
Please run the front-end checktool SAPBEXC.XLA as per Note 918394 and ensure there are no errors.
Path for frontend patches
Please goto
-> service.sap.com/patches
->entry by application group
->SAP Frontend Components
->SAP GUI FOR WINDOWS
->SAP GUI FOR WINDOWS 6.40
->SAP GUI FOR WINDOWS 6.40
->Win32
->Apply latest frontend patch
Once the installation is done run the installation check file as per note 918394 and ensure that there are no red flags.
Rgds
Manoj Kumar
Maybe you are looking for
-
NWDS 7.0 Web Dynpro can't run on WAS 6.4
Dear All, I got a question may be some of you encountered. I am using NWDS 7.0 to develop a web dynpro application and try to run in WAS6.4, however, it prompt the errors " java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/clientserver/uielib/st
-
Hi , I am supposed to create these procedures through program .Anyone please give me the program to create the PO release strategy & Purchase Requisition release strategy. Thanks
-
As of today, no services except "Computer" and "Settings" show up
Apple TV 2. Listened to music via iTunes Match last night, watched some YouTube videos. All set to watch some Netflix today. However, I have *no* services showing up now on my Apple TV (second gen) except 'Computer' and 'Settings'... I restarted t
-
How do i add page numbers to an existing document
how do i add page numbers to an existing document
-
Problem with PowerBook G4 Battery Updater
I hope somebody can help me. My Batterie do have 66% of its native capacity. I like to run the new Updater to optimize the capacity. But I get an error if I start the Updater: Your Power Supply must be connected The updater don't start. But I have al