Problem in Query output
Hi Frns,
I'm facing a problem in showing query o/p.
query 1:
in header section..usually it displays like this
char Key fig
Z1 Z2
X1,X2 Unit of Z1 Unit of Z2
In this scenario,i dont want the unit row of the key figure in header section.....can anyone ls help that.
So greatful.....
Regards,
shaw
sorry frns...
it displayed wrongly.
z1,z2
x1,x2 unit
this means in 1st row im getting the description of key fig
in 2nd row , it displays the char descr and the unit of key fig x1,x2.
it all displays in header section.
My req is i dont want the KF unit to be displayed in header.
i.e 1st row itself...char and key fig descrip should come.
hope it clarifies.
thanks,
shaw
Similar Messages
-
ALERT PROBLEM WITH QUERY OUTPUT
I have a few queries that were originally created using the B1 Query Wizard, that I then attached to Alerts. Unfortunately when the Alert runs, the query output is different either in layout or records returned (usually less) when compared to running the query directly. Is this a glitch in B1 as some folks have told me or is there a problem with queries created by the Query Wizard?
Hi Frank,
This is a limitation.
The note 874145 is written about it. It also offers some workarounds.
I would think that you can also create a 'Select count(*)' query that would also run as an alert that would tell the user how many records are affected. I did not test this, just an idea.
Hope it helps,
Jesper -
To download the query output to falt file
Hi all,
i have a query which i know will give more than 65k records as the output for a selection.
i cannot run this query in excel due to its limitation.
if i run on web i cannot download this as downloading is happening to excel file only.
The customer ideally wants to download the query result to a text file(csv,tab-delimited etc) which inturn it will upload to MS-Access.
How do i achieve this?
SAP has given response use try using these options:
1.open interfaces to receive the output of a query via the MDX language.
2.open hub tool as it is designed for big amounts of data.(i suppose this is not possible as i want to download query output not the data target contents)
how do i achieve my scenario with option 1?
Are there any alternatives??
Any useful help will be rewarded.
Regards,
Dhanya.hi vivek,
thnks for the useful reply.
i have some problem with my ID,hence loggin in through my coleague's ID.
i will assign u points as i get logged in.
I did as u said by downloading it to unconverted format.
the file got download to a text file.where the output has
1.header rows(10 lines almost)
2.the values r coming in single quotes e,g:
'144000023073 'TAAS SETTLEMENT CONV 738 '19333000 '30.09.2006 '0.000
how can i remove all this?
Regards,
Dhanya
I -
Output mismatch between BEx query output and WebI Report output
Hi All,
I have a BEx query in which there are only characteristics placed in rows.
There are combinations of the values of the characteristics giving different records in the query output.
Date is one of the characterisctics in the query output.
There is an output mismatch between the query output and the WebI report output in the following case:
When there are 'Not Assigned' or '#' or blank values, there are additional entries(rows) in the WebI report, giving repeating or wrong entries in the Date field. This is incorrect data.
Is this because of the 'Not Assigned' or '#' or blank values of the Characteristics or is there any other reason?
How do I fix this?
Please helo me with this.
Thanks and Regards,
Srilakshmi BHi Rajesh,
I need to verify the WebI report output for records with # and 'Not assigned' values for the cHracteristics in the report.
So I cannot check the WebI report by hiding the # or Not assigned values.
The problem is that in the Query output the records are like these shown below:
Char1 CHar2 CHar3 Date field
A B C Date1
#(Not assgined) #(Not assgined) #(Not assgined) No value
Where as the WebI report output is as below:
Char1 CHar2 CHar3 Date field
A B C Date1
#(Not assgined) #(Not assgined) #(Not assgined) Date1
As shown here, there are wrong/repeating entries for the Date field in the WebI report output.
Please check this and let me know what could be the issue and how do I fix it.
Thanks and Regards,
Srilakshmi B -
Result Row in the query output
Hi,
If I restrict a characteristic by hierarchy then I cant have the result row displayed. If the hierarchy active is removed then the result row gets displayed. All characteristics are marked to show the result row.
This characteristic is Account Number. If in the query definition I remove the restriction on account numbers and just select hierarchy active and the required hierarchy in the properties then I get the result row in the output. But now it also displays all the unassigned account numbers in a separate node Not Assigned Account Number (s).
I cant even restrict it in the output with hierarchy active selected. When I do select filter value in the output the options Include in Selection and exclude from Selection are grayed out and hence cant select it.
Please advice on this issue
Thank you,
samHi Jaya,
I think you misunderstood my issue.
My problem is not that i do not want to see the field. But instead, i do not want to see only the results row in the query output.
I need to have the results to populate a calculation via sumct formula.
My question is, can sumct be populated if i hide/supress RESULT row ?
Regards,
Maili -
hi there,
I have an issue with the display of hours 00:00:00 in the query output in BW.
The system assumes it as 0 or blank and therefore display it under unassigned hour.
I am using the reference of 0TIME for this hourly display.
When I checked the 0TIME i could not find the corresponding SID value for 00:00:00 hours.
Can anybody please advise what needs to be done?
Thanks in advance,
Kind regard,
KateHi Kate,
I am experiencing the same problem as you: an InfoObject, created referencing 0TIME, represented in the BEX Query as "#" when the Value is "00:00:00".
How did you work it out?
The Formula Variable strategy is not applicable in this case because 0TIME is not a key figure !
Bye
Aldo -
Inconsistencies between DEV and QAS query output
Hi all -
I am currently using a BI query in my VC model that I send the output to a table in VC, note that I am showing only a few fields from the output. This works for some tables in my model that use another query.
The problem is that when I change the alias (using the Alias Manager tool) from BI DEV to QAS, then deploy, the number of columns is changing in my table and seems to give me all of the potential query output and not only the fields I have selected in my model.
To make a test, I have tried to hide the output fields in the BI query itself, and this seems to have a direct effect on the shown columns in VC but creates some other unwanted problem. In fact, it works for the other query...
Anyone had the same problem? could that be a refreshing problem?
Thank you,
Claude.Hi
It could be a refresh problem. Try to change the RFC from the query definition & refrech the 'Data service'. Then test the output of the query from 'Test Query' then save & deploy. Also in Columns try with the charachters where type is 'Text'.
Regards
Sandeep -
Displaying selection criteria as part of query output
Hi Folks,
How do you add the selection criteria to the header of an SAP Query output?
Thanks,
Royhi,
for your own reports (beginning with z and y)and queries this should be no problem. Create a program, which makes your demanded heading, and include it to your reports.
Andreas -
Problems about query filter (BEx).
Hello there,
I have some problems about query filter (BEx).
I have master data and I want to use attribute in this master data to dynamic filter in query(BEx).
But this attribute is key figure. I can't done it now. TT
Is this possible? If yes, could anyone advise how this is to be done?
Thanks in advance.Hi
In BEx there is option as 'Exceptions' & 'Conditions'. If you go in condition, you can specify range for key figure output. This is either predefined or by user selection. You create the condition as per your requirement & it will show you filtered data.
How to create conditions you will find easily on this site.
You can create as many conditions as no of filters you want. You can create these at query level also at report output level. -
Remove comma in query output from Char used as KF
Hello Friends,
To be able to display a characteristic in a particular way I used formula variable and displayed it as Key Figure in the query output. By doing this I am getting the output in the required format, but only problem is that the value is being displayed with commas. As it is an order number, I want to display it without commas.
I don't want to use VB as the query is to be published in web also.
Please suggest if there is any way to achieve this.
Thanks in advance.
PraveenHey Praveen, there's a few ways to skin this cat. The simplest method is to make sure that the user parameters in SU3 don't have commas for numbers. The problem is that this is a global setting so you won't get commas for other numbers in which you may want commas. Also, you'd have to make sure your replacement variable was defined as type "number". The other options include using VBA in BEx, and/or Table Interface in the Web. If you are using BW 3.5, you can use XSLT to render a table with and not have commas for that value by using the XML Query Result Set Item. Hope that helps,
Prakash -
How to Align Query output in vertical grids in Classic Reports
HI all,
I have a requirement to display query output in a vertical grid.
For example, If my query output is :
SQL, PL/SQL, Forms,Reports, XMLP, APEX etc then output should be displayed in following format:
1. SQL 2. PL/SQL 3. Forms
4. Reports 5. XMLP 6. APEX
Thanks in Advance!!
Regards,
Vamsi866010 wrote:
Thanks for the response!!
SQL: select * from emp
where 1=1
and emp = 1 ;
We want to display emp details from the above query in the following format:
EMP No : 1 Ename: XXX Manager_Id: 2
Job: Consultant Sal: 1000 Commission: 5
We want a break after three columns.Create a custom named column template and base the tabular form report on this: {message:id=10399762}
Please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "866010".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand. -
Store Query Output or Cache Query
My search query returns almost about 5000 records or more at
a time out of 7million records. and I am outputing about 35 records
at a time on a page. The problem is when the user pages to the next
page, I hit the DB again and again through the paging process of
the user.
The Cache attribute of <cfquery> does not work when you
are using <cfqueryparam> methods in the Components which we
are using.
How can I Store all the outputs of the Query returned into a
var and cycle through it instead of hitting the DB every time or is
there another method of caching this returned query output?
Please give example.Thanks, that did the trick, another problem that came out of
this is Internet Explorer. When Users page to lets say page #6 and
then use the back button to come back, when it reaches the page
one,the Query executes again. This only happens with internet
explorer. I have tried caching the page but still same problem
persists. I have changed the form method to "get" and it is still
problematic. -
Problem with Excel output format
Hi Guys,
I am creating a report in XML Publisher (not standalone). I am facing some problems could anyone please help me to figure out the issues.
Is it possible to have all three output format (PDF, HTML & EXCEL) exact (same aligned) only by creating a single RTF Template? I am facing the problem with Excel output format the output format of excel is taking excels cell formatting.
Example Numeric fields --> Right Aligned, text fields --> Left Aligned
One more issue with excel is -ve(negative) values are getting displayed in red and in brackets like ($13) (with red color).
Our client want excel output on priority.
Is there any limitation for excel output format of reports?
It is very urgent for us please help.
Any help would be highly appreciated.
Thanks,
Pragati
Edited by: user11237443 on Aug 27, 2009 1:22 AMHi Mahi,
Thanks for your response. But i could not understand how can we write wrapper program could you please give some light on this or provide some link it would be helpful for me:-)
I have read that blog for excel limitations but i have more question?
1) What about the negative values?
if any field is displaying negative amount then excel not displaying right value for that:(
2)How can we align header or data?
Do XMLP with EBS provide any solution for formatting in excel?
3) If for the alignment of numeric value we concatenate them with any special character then how can we perform calculation that field?
Here are so many formatting issues do we need to write any code in xml for that?
Please help.
Many Thanks,
Pragati -
Problem loading Query Designer Add-in
Hi All,
Can anyone please help me on my below issue.
Whenever user is trying to start a new query in Essbase , he is getting below error message. It will not allow user to build a fresh Essbase pull
Problem loading Query Designer Add-in. Workbook Activate,open & close operations may not be fully propogated
Thanks in advance.
Regards
VishalHi Vishal,
1) Try to remove the addin and then add again.(Before doing this close all the excel process from the task Manager)
2) Check weather essexcln.xll and essxleqd.xla are corrupted. -
View with columns based on function - problem with query
Hi,
I'm using Oracle 9i;
I've created a view which has columns based on a table columns (multiple columns from 1 table) and funtion (multiple columns based on 1 function).
The function takes ID as the first argument and name of the column to determine which value to return as the second one.
Here is a sample of such function (simplified):
FUNCTION my_function
(in_id IN NUMBER, in_col_name IN VARCHAR2)
RETURN VARCHAR2
IS
c_name VARCHAR2(100);
c_last_name VARCHAR2(100);
BEGIN
SELECT T.NAME, T.LAST_NAME
INTO c_name, c_last_name
FROM TABLE_1 T, TABLE_2 Z
WHERE T.PK = Z.FK
AND Z.ID = in_id;
IF in_col_name = 'NAME' THEN
RETURN c_name;
ELSIF in_col_name = 'LAST_NAME' THEN
RETURN c_last_name;
END IF;
END;
For simplicty I've restricted the number of columns.
CREATE OR REPLACE VIEW my_view
(ID, NAME, LAST_NAME)
AS
SELECT
T.ID ID
,CAST(my_function(T.ID,'NAME') AS VARCHAR2(100)) NAME
,CAST(my_function(T.ID,'LAST_NAME') AS VARCHAR2(100)) LAST_NAME
FROM TABLE T;
There is no problem with query:
SELECT * FROM my_view;
The problem arises when I query the view (regardles of '=' or 'LIKE'):
SELECT * FROM my_view
WHERE name LIKE '%some_part_of_name%'
The query returns rows for same names, for same it doesn't. If I put '=' and the whole name the query returns nothing, but when I put 'LIKE' and the first letter it returns rows in some cases.
I've tried to debug this situation and I've discovered that the function recives ID not in the proper order and not the same amount of times - in explicit:
for each ID in (1, 2, 3, 4, 5, 6, ... , 100) the function should be called twice for each ID and in the same order, but it does not.
I get 1, 1, 2, 3, 3, 6, 20, 20 and so on.
Help needed.
Greetings.The problem is more complicated than the solutions provided here.
The reason why I'm using the function is this:
the original view was constructed using multiple union all selects and the speed was terrible. I've created the index on the base table to obtain a proper sort. For retriving all records at once the view works perfectly, but if one wants to query by columns based on function the results are suprisng - sometimes there are, some times there are none, or if you serch with "like" and only a part of string there are results, but with "=" there are no results.
Here are real DDLs:
View:
CREATE OR REPLACE VIEW V_DOK_ARCH
(ID_ZDAR, TYP, STAN, DATE_CREATED, CREATED_BY,
DATE_MODIFIED, MODIFIED_BY, SPRA_ID_SPRA, PODM_ID_PODM, PODM_UMOW_ID_UMOW,
NR_WFS, WFS_NR_INTER, UWAGI_OPER, FUNDUSZ, NUMER,
DATA_PODPISANIA, RODZAJ, TYP_PRZY, TYP_UBEZ, NAZWISKO,
IMIE, IMIE_OJCA, NAZWA_FIRMY, NAZWA_FIRMY_SKR, DANE_KLIE)
AS
SELECT /*+ INDEX(Z ZDAR_DATE_CREATED_DESC_I) */
Z.ID_ZDAR ID_ZDAR
, Z.TYP TYP
, Z.STAN STAN
, Z.DATE_CREATED DATE_CREATED
, Z.CREATED_BY CREATED_BY
, Z.DATE_MODIFIED DATE_MODIFIED
, Z.MODIFIED_BY MODIFIED_BY
, Z.SPRA_ID_SPRA SPRA_ID_SPRA
, Z.PODM_ID_PODM PODM_ID_PODM
, Z.PODM_UMOW_ID_UMOW PODM_UMOW_ID_UMOW
, Z.NR_WFS NR_WFS
, Z.WFS_NR_INTER WFS_NR_INTER
, Z.UWAGI_OPER UWAGI_OPER
, Z.FUNDUSZ FUNDUSZ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NUMER') AS VARCHAR2(30)) NUMER
, F_Rej_Zdar_Date(Z.ID_ZDAR, 'DATA_PODPISANIA') DATA_PODPISANIA
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'RODZAJ') AS VARCHAR2(4)) RODZAJ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'TYP_PRZY') AS VARCHAR2(4)) TYP_PRZY
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'TYP_UBEZ') AS VARCHAR2(3)) TYP_UBEZ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWISKO') AS VARCHAR2(30)) NAZWISKO
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE') AS VARCHAR2(30)) IMIE
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE_OJCA') AS VARCHAR2(30)) IMIE_OJCA
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY') AS VARCHAR2(300)) NAZWA_FIRMY
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY_SKR') AS VARCHAR2(100)) NAZWA_FIRMY_SKR
, CAST(LTRIM(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWISKO')||' '||F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE')||' '||F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE_OJCA')||F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY')||DECODE(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY'),NULL,F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY_SKR'),NULL)) AS VARCHAR2(492)) DANE_KLIE
FROM T_ZDARZENIA Z
WHERE F_Rej_Zdar_Char(Z.ID_ZDAR, 'JEST') = 'T';
and functions:
CREATE OR REPLACE FUNCTION F_Rej_Zdar_Char
(WE_ID_ZDAR IN NUMBER
,WE_KOLUMNA IN VARCHAR2
RETURN VARCHAR2
IS
c_numer T_PRZYSTAPIENIA.NUMER%TYPE;--VARCHAR2(30);
c_rodzaj T_KLIENCI.RODZAJ%TYPE;--VARCHAR2(1);
c_typ_przy T_PRZYSTAPIENIA.TYP_PRZY%TYPE;--VARCHAR2(1);
c_typ_ubez T_PRZYSTAPIENIA.TYP_UBEZ%TYPE;--VARCHAR2(3);
c_nazwisko T_KLIENCI.NAZWISKO%TYPE;--VARCHAR2(30);
c_imie T_KLIENCI.IMIE%TYPE;--VARCHAR2(30);
c_imie_ojca T_KLIENCI.IMIE_OJCA%TYPE;--VARCHAR2(30);
c_nazwa_firmy T_KLIENCI.NAZWA_FIRMY%TYPE;--VARCHAR2(300);
c_nazwa_firmy_skr T_KLIENCI.NAZWA_FIRMY%TYPE;--VARCHAR2(100);
c_jest VARCHAR2(1) := 'T';
c EXCEPTION;
BEGIN
--dbms_output.put_line('id zdar wykonania '||WE_ID_ZDAR);
BEGIN
SELECT p.NUMER, k.RODZAJ,p.TYP_PRZY,p.TYP_UBEZ,k.nazwisko, k.imie, k.imie_ojca, k.nazwa_firmy, k.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D1, T_PODMIOTY D2
WHERE p.KLIE_ID_KLIE = k.ID_KLIE
AND z.PODM_ID_PODM = D1.ID_PODM
AND D1.KLIE_ID_KLIE = p.KLIE_ID_KLIE
AND Z.PODM_UMOW_ID_UMOW = D2.ID_PODM
AND D2.PRZY_ID_PRZY = P.ID_PRZY
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER, k.RODZAJ,p.TYP_PRZY,p.TYP_UBEZ,k.nazwisko, k.imie, k.imie_ojca, k.nazwa_firmy, k.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D
WHERE z.PODM_UMOW_ID_UMOW IS NULL
AND z.PODM_ID_PODM = D.ID_PODM
AND D.KLIE_ID_KLIE = k.ID_KLIE
AND p.KLIE_ID_KLIE = k.ID_KLIE
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL NUMER, NULL RODZAJ,NULL TYP_PRZY,NULL TYP_UBEZ, I.nazwisko, I.imie, I.imie_ojca, I.NAZWA NAZWA_FIRMY, I.NAZWA_SKR nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_ZDARZENIA z, T_INSTYTUCJE I
WHERE Z.TYP IN ('WFS526','WFS542','WFS553','WFS609','WFS611','WYP_KS','WYP_PO','WYP_SB','DI_ZAT')
AND z.PODM_UMOW_ID_UMOW IS NULL
AND Z.PODM_ID_PODM = I.ID_INST
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER NUMER, DECODE(a.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(a.TYP_AGENTA,'P','R',a.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,a.nazwisko, a.imie, a.imie_ojca, a.nazwa_firmy, a.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_UMOW_ID_UMOW = p.ID_AGUM
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER NUMER, DECODE(a.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(a.TYP_AGENTA,'P','R',a.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,a.nazwisko, a.imie, a.imie_ojca, a.nazwa_firmy, a.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_ID_PODM = a.ID_AGAG
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER_UMOWY NUMER, DECODE(p.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(p.TYP_AGENTA,'P','R',p.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,p.nazwisko, p.imie_pierwsze, p.imie_ojca, p.nazwa_firmy, p.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_UMOW_ID_UMOW = p.TECH_ID_AGUMT
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER_UMOWY NUMER, DECODE(p.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(p.TYP_AGENTA,'P','R',p.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,p.nazwisko, p.imie_pierwsze, p.imie_ojca, p.nazwa_firmy, p.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_ID_PODM = a.ID_AGKAN
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.NUMER_UMOWY NUMER, DECODE(k.TYP_PRZYSTAPIENIA,'P','F','P') RODZAJ,k.TYP_PRZYSTAPIENIA TYP_PRZY,'NPO' TYP_UBEZ, k.nazwisko, k.imie_pierwsze, k.imie_ojca, k.nazwa_firmy nazwa_firmy, k.nazwa_firmy_skr nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_WE_UM_NPO_TAB k, T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND k.TYP_PRZYSTAPIENIA IN ('P','W')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.NUMER_UMOWY NUMER, 'F' RODZAJ,'-' TYP_PRZY,'OPS' TYP_UBEZ, k.nazwisko, k.imie_pierwsze, k.imie_ojca, NULL nazwa_firmy, NULL nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_WE_UM_OPS_TAB k,T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL NUMER, NULL RODZAJ,NULL TYP_PRZY,NULL TYP_UBEZ, NULL nazwisko, NULL imie_pierwsze, NULL imie_ojca, NULL nazwa_firmy, NULL nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_ZDARZENIA z
WHERE z.TYP NOT IN ('UM_OPS','UM_NPO','NPO_OP','UZUP_U')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
--dbms_output.put_line('id zdar wykonania '||WE_ID_ZDAR||' ostatni wyjatek');
NULL;
END;
END;
END;
END;
END;
END;
END;
END;
END;
END;
--raise c;
IF WE_KOLUMNA = 'NUMER' THEN
RETURN c_numer;
ELSIF WE_KOLUMNA = 'RODZAJ' THEN
RETURN c_rodzaj;
ELSIF WE_KOLUMNA = 'TYP_PRZY' THEN
RETURN c_typ_przy;
ELSIF WE_KOLUMNA = 'TYP_UBEZ' THEN
RETURN c_typ_ubez;
ELSIF WE_KOLUMNA = 'NAZWISKO' THEN
RETURN c_nazwisko;
ELSIF WE_KOLUMNA = 'IMIE' THEN
RETURN c_imie;
ELSIF WE_KOLUMNA = 'IMIE_OJCA' THEN
RETURN c_imie_ojca;
ELSIF WE_KOLUMNA = 'NAZWA_FIRMY' THEN
RETURN c_nazwa_firmy;
ELSIF WE_KOLUMNA = 'NAZWA_FIRMY_SKR' THEN
RETURN c_nazwa_firmy_skr;
ELSIF WE_KOLUMNA = 'JEST' THEN
RETURN c_jest;
END IF;
END;
CREATE OR REPLACE FUNCTION F_Rej_Zdar_Date
(WE_ID_ZDAR IN NUMBER
,WE_KOLUMNA IN VARCHAR2
RETURN DATE
IS
d_data DATE;
BEGIN
BEGIN
SELECT p.DATA_PODPISANIA
INTO d_data
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D1, T_PODMIOTY D2
WHERE p.KLIE_ID_KLIE = k.ID_KLIE
AND z.PODM_ID_PODM = D1.ID_PODM
AND D1.KLIE_ID_KLIE = p.KLIE_ID_KLIE
AND Z.PODM_UMOW_ID_UMOW = D2.ID_PODM
AND D2.PRZY_ID_PRZY = P.ID_PRZY
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISANIA
INTO d_data
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D
WHERE z.PODM_UMOW_ID_UMOW IS NULL
AND z.PODM_ID_PODM = D.ID_PODM
AND D.KLIE_ID_KLIE = k.ID_KLIE
AND p.KLIE_ID_KLIE = k.ID_KLIE
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL DATA_PODPISANIA
INTO d_data
FROM T_ZDARZENIA z, T_INSTYTUCJE I
WHERE Z.TYP IN ('WFS526','WFS542','WFS553','WFS609','WFS611','WYP_KS','WYP_PO','WYP_SB','DI_ZAT')
AND z.PODM_UMOW_ID_UMOW IS NULL
AND Z.PODM_ID_PODM = I.ID_INST
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISANIA DATA_PODPISANIA
INTO d_data
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_UMOW_ID_UMOW = p.ID_AGUM
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISANIA DATA_PODPISANIA
INTO d_data
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_ID_PODM = a.ID_AGAG
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISU_AGENTA DATA_PODPISANIA
INTO d_data
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_UMOW_ID_UMOW = p.TECH_ID_AGUMT
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISU_AGENTA DATA_PODPISANIA
INTO d_data
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_ID_PODM = a.ID_AGKAN
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.DATA_PODPISANIA_UM DATA_PODPISANIA
INTO d_data
FROM T_WE_UM_NPO_TAB k, T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND k.TYP_PRZYSTAPIENIA IN ('P','W')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.DATA_PODPISANIA_UM DATA_PODPISANIA
INTO d_data
FROM T_WE_UM_OPS_TAB k,T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL DATA_PODPISANIA
INTO d_data
FROM T_ZDARZENIA z
WHERE z.TYP NOT IN ('UM_OPS','UM_NPO','NPO_OP','UZUP_U')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
d_data := NULL;
END;
END;
END;
END;
END;
END;
END;
END;
END;
END;
IF WE_KOLUMNA = 'DATA_PODPISANIA' THEN
RETURN d_data;
END IF;
END;
Maybe you are looking for
-
How to hibernate Windows 7 ?
Running Win 7 in dual boot with XP sp3 on my desktop. In my city Electricity Supply is inconsistent so I simply hibernate my xp & switch off the ups before leaving. In Win 7 I have to shut it down everytime I leave for fear that electricity may go ou
-
When I output airplay to my TV screen it does not fill the screen. Look a bit like a 4:3 showing on a wide screen? Also happens with utube? Any ideas please
-
Hi, I just installed Labview 8.2 and am trying to run an old Labview program. But I cannot find DAQmx.vi in the vi library, hence cannot run commands like DAQmx write/read. Can I download it from somewhere? I purchased the software through Penn Stat
-
Please help. Lenovo e545 cursor problem
Hello all. I'm stumped. I have the lenovo thinkpad edge e545 laptop. My problem is as soon as my computer logs in from being off the touch pad stops working. It only allows me to make pages go up and down, the cursor does not move. I have tried
-
WebGL malfunction in latest version
I have a GLSL tutorial at this address: http://www.itn.liu.se/~stegu/OpenGLinsights/shadertutorial.html With the update to Android 4 and the latest version of Firefox, shaders 5 to 10 stopped working correctly. Everything was fine before, and looked