Problem in Re-Center in a map
Hi all,
I am having problem with the x,y,mapsize in my application.
I have two themes say road and pipe.
Application shows both the themes if both are checked and only one theme if one is checked.
In pipe theme I am getting correct response for zoom-in,zoom-out,re-center but when i zoom out for road theme it is giving me error.
Error: Null Pointer Exception
More information about your application will be very helpful in figuring out what is the problem. What kind of application are you trying to build? JSP or something else? Where does the Null Pointer Exception come from? What is the complete error message? Can you post some of your code?
Similar Messages
-
While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.
While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.
-
I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?
Hi, bamboo64.
Try closing all open applications in multitasking and power cycling the device. Once this is done test the results. If the issue persists, I have included a couple troubleshooting articles that I would recommend going through.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H. -
Crm- Contracts problem with profit center!
HI All, I am facing a problem in profit center posting, when billing a contract (VF01, VF44) and MIGO
Contract Scenario,
I am Creating Contract In CRM and replicating it as a contract in ECC to performe Billing(VF01) and Revenue recog(Vf44) the contract created is replicating to ECC with Internal order as a real account assignment object on the contract , when we are billing / revenue recog the dummy profit center is getting populated inthe accounting entries , the senario is explained as below
I have replicated contract with 4 line items, with different profit centers (Say P1, P2, P3, P4 and assigned to same real internal order(IO1),as i am using single object controlling and controlling senario at the transaction level) to all the line items ,when ever the line item is Billed(Vf01) or the Revenue recognized on the Contract(Vf44) the Accounting Entries are getting populated with Dummy profit center as the AUFNR u2013 prctr is u201CDummyu201D
I there a way we change the profit center on the accounting document on billing and revenue recognition
Goods receipt:
I am Creating Contract In CRM and line item in the contract which is backlined with the princial will generate a PR in ECC with Account assignment cat "F" When ever a Po with u201CFu201D account assignment is created and GR is done on the Same , Dummy profit center is getting populated in the Accounting entries
I there a way we change the profit center on the accounting documents (derive the profit center from the Cost center _ prctr rather than the AUFNRu2013 PRCTR) and even though the Internal order is assigned to the line item
We are not using the Document Splitting Functionality, I am aware that when ever there is real cost object assignment, profit center will be populated from the cost object only
I require your help very badly , Please guide me .
ThanksHi,
Did you try using substitution rules for CRm processes ? -
We have a SOAP to PROXY scenario Which is in Production.
We keep getting the Error:
" Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
What are all the possible situation where we face such as this issue in Production.Please check the SAP note
# 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues -
problems in game center
i have played calsh of clan ago.
someone has logged on my account. I have changed the password but failed.
i need you to help meHello trankiemhung,
Thanks for using Apple Support Communities.
I found the following information that will help resolve your issue:
Using Game Center
http://support.apple.com/kb/HT4314
Additional Information
If you are having difficulty logging in to Game Center or staying connected
Verify that you are connected to the Internet.
If you are unable to create or sign in to your Game Center account from within a game, try creating or signing in to your account using the Game Center app.
Try signing out of your Game Center account, then sign back in. If you can't sign in to your Game Center account with an Apple ID, try resetting your password or using another email address. To manage your Apple ID account, go to My Apple ID.
When using a Wi-Fi connection, verify that your Wi-Fi router is configured for Game Center.
Take care,
Alex H. -
New EPG download problem in Media Center
I'm currently experiencing problems downloading the EPG guide in Windows 7 Media Center and Vista Media Center. Over the last 2-3 weeks, the guide download has stopped working on all of my computers in Vista and 7.
The error code is 34 and this is caused when Media Center cannot establish an connection to the internet.
I have to connect to the internet via a proxy server/webcache. I have contacted the network support people and they took network activity captures and
identified a problem with Media Center not respecting the proxy/webcache settings in Internet Explorer and hence it cannot download the guide.
Previously, this process has worked perfectly on the network and I am told no changes have been around the time the problem started.
This only occurs on a wired network. For the same computer connected via wireless on the same proxy/webcache, the guide sucessfully downloaded and Media
Center respected the proxy settings. There are multiple machines exhibiting this behaviour.
Is anyone aware of any changes Microsoft has made to the guide download process over in the last month or so which may have resulted in this sort of
behaviour as this appears to be a bug in Media Center.
Thanks
elyohMy Windows 7 Media Center was unable to download electronic program guides for about a month and a half. I search all the websites and tried all the fixes to no avail. I have an always on internet connection. Tested my connection within
Media Center. I tried to reconfigure my TV. I tried alternate zip codes within my area. Nothing worked. First, I found that I had NRMBMCHandler.dll (9KB) missing from my ehome directory. (C:/Windows/ehome/NRMBMCHandler.dll).
I replaced the file using a copy from another computer.
Then I found on the Microsoft Developers website instructions on Recovering a Corrupted Guide Data Store.
1. Close Windows Media Center
2. Open Task Scheduler (Control Panel>Administrative Tools>Schedule Tasks)
3. In the console tree under Task Scheduler (Local), expand Task Scheduler Library>Microsoft>Windows>Media Center.
4. In the console window under Name, right click ObjectStoreRecoveryTask, and then click Run.
After that action is complete, open Windows Media Center. A message pops up telling you that the system has repaired guide listings and the listings will be downloaded. Check your recording schedule as the repair may have interfered with scheduled
recording.
After that, problem with EPG was corrected. No reinstall was necessary. Hope this helps others. -
Problem on Profit Center Group Heirarchy
Hi,
I have a problem regarding profit center group heirarchy. The situation is like this: I have the highest parent node which is the Group Name then its first child in the tree is the persons responsible then next is the companies under him/her and then the projects under the companies.. Now i have a program that generates income stmt depending on how the user filters it's data from FAGLFLEXA table using profit center field.. the filtering shud be like this:
Select-options: Group Name,
Person Responsible,
Companies,
Projects.
my problem is i dont know where i cud get the all those fields. I wonder if anyone cud help. THnx.
And also i want to filter the data selected by the user in select-options like for example if the user chooses
Group name, the next select-options which is person responsible shud depend on the Group name selected and that follows with the next select-options. Thnx in advance>
Michael Sullano wrote:
> Not just read it.. I want to put it as filters for my report.. i want to use it in select-options as what i've said in my problem.. is there anyway i could do it? Thnx in advance
Ok, I understand from this that you can read the hierarchies and get your data. Once you've got your data then you can validate the user input against it. I'd try bypassing the normal SAP search helps and use my own pop-up screens called from buttons on the selection screen to display the filtered data and allow the user to select what they wanted at each level.
For example.
Button 1 would allow them to search and select Level 1 (top node) values.
Button 2 would call a pop-up screen which would display and allow them to select Level 2 (next node down) values that relate to the Level 1 values already selected.
Button 3 would call a pop-up screen which would display and allow them to select Level 3 values that relate to the Level 2 values selected.
And so on... -
What does problems were found with the partition map mean
Why is there a problem when I run my disk utility that says "problems were found with the partition map that which might prevent booting"? Why is there a problem????????
You have to repair your partition map. It's the most important part of the hard drive related to software, because if the partition map doesn't work, the whole hard drive is useless.
As you have OS X Lion, you should be able to repair it while OS X is started. Open Disk Utility (in /Applications/Utilities), choose your hard drive at the top of the sidebar, and press the button to repair the disk. What do you see in the blank box?
Also, after choosing the hard drive in Disk Utility, tell me the SMART status, at the bottom of the window. You may also want to check the Macintosh HD status -
Problems accessing control center
After coloning the repository user from production back to development I have some problems getting control center to work again. At first I strugled getting start_service to work, however i got doing the following after a reastart:
DVP_RT_RES_OWNER@dvu SQL> @/oracle/product/10.2.0/owb/owb/rtp/sql/start_service.sql
Available
PL/SQL-prosedyren ble fullført.
However it still does not work, and show_service give me:
DVP_RT_RES_OWNER@dvu SQL> @/oracle/product/10.2.0/owb/owb/rtp/sql/show_service.sql
Not Available
PL/SQL-prosedyren ble fullført.
Any sugestions?DVP_RT_RES_OWNER@dvu SQL> @/oracle/product/10.2.0/owb/owb/rtp/sql/service_doctor.sql
There are errors in one or more PL/SQL packages and functionsPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availableService script is accessible to the database server
Connection information stored within the repository is correct
PL/SQL-prosedyren ble fullført. -
Hi
I bought webcam instant yesterday,i downloaded the newest drivers for it...
But it doesn't work.
Everytime i start webcam center the camera turns off...
I tried it with msn messenger...but it worked perfectly...
HELP!!!!...the version is .0.02.0729
just try google.....
but i'm still searching for the solution of the problem with webcam center!!!! -
I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs. What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc. This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system. This happens whether I trying to Play a disc or burn the disc to the hard drive. The drives work great though as they do play DATA discs all the way through. MP3 discs play fine. It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything. Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help. Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!
Hi,
All dimms work individually? Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive? I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk? Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
You have some options to consider once you can stablize your PC for updating the BIOS.
Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
Try a bootable BIOS update process as suggested at this site. -- less safe but doable
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Problem install ovi store and ovi maps?
my phone nokia C7 can not turn on, then I use a three finger salute to hard reset, and my phone can turn on again, but social networking application, ovi store and ovi maps are lost, I tried installing again, but always "unable to install", while applications else could, what happened? what should I do? I want to install it again.
Unfortunately that is one of the outstanding issues with the current firmware in the N8, E7 and C7. The hard reset does not reinstall Qt which is required for the apps you mentions. See this.
/t5/Nseries-and-S60-Smartphones/N8-Maps-problem-after-hard-reset/td-p/783327
Although it is possible to reinstall Qt, the process is highly complicated and should only be atempted by expert users. My suggestion would be to either get your phone reflashed at your local Nokia Care Point or to wait for the next firmware up[date which will hopefully include a fix for this. -
Problem with GPS on Nokia Ovi Maps
Hello everybody! I have a problem with GPS on my Nokia E90. Please can anybody help me with this problem. When i try to find my location using GPS with Nokia Ovi Maps the program show me a table like in the picture, but if i use Google Map the GPS work fine.
Please can anyone help me to fix this problem??? Thanks!
Solved!
Go to Solution.
Attachments:
Scr000016.jpg 152 KB
Scr000015.jpg 189 KBSome days ago i just format my mobile but till now the GPS on Nokia Ovi Maps wokrs fine. I just don't know why after i format my mobile the Ovi shows me this message.
When i go to Menu -> GPS -> GPS Data -> Navigation -> Options -> Satellite status, my phone shows me this mesage:
1-st image is when i am inside of my room and
2-nd image is when i am outside of my room.
Can you tell me what does this message mean???
Anyway thanks man for your help!
Attachments:
1-st image.jpg 59 KB
2-nd image.jpg 62 KB -
Setup problem of Entertainment Center for Windows 7.
There is a problem with Creative's Entertainment Center for Sound Blaster X-Fi. In the download section for my SB X-Fi Platinum card, the Entertainment Center setup file is only available for Windows Vista and not for Windows 7. Even if I choose compatible mode for Windows Vista it won't work because in the installation process you'll get an error message when it's almost about to finish all the time at the same spot. It would be great if someone could correct this now because it has been like this for a long time.
***** Full Size Link: http://imageshack.com/a/img35/6577/lskf.png *****B? You have Creative Console Launcher, I believe and that is the program you can use to change between audio creation, entertainment and gaming mode. Each mode highlights the card's specialities in that area. You have a vitural multi-track mixer in audio creation mode. You have Dolby and DTS encoder/decoder options in entertainment mode, and you have a generic access to the cards other features in gaming mode.
Maybe you are looking for
-
BW SEM-BPS API functions from a Web Dynpro project in Netweaver
Hi, Rather than using the standard Web Interface Builder in BW SEM-BPS (3.1B), we have to use SAP Netweaver to create a Web Dynpro project which accesses all the API_SEMBPS functions, such as GETDATA, SETDATA, FUNCTION_EXECUTE etc. Has anyone done th
-
Mac wont connect to tv :(
Hi, I am trying to connect my mac mini to my lg tv, its an lg22ls4d. i know the tv can be used as a monitor and that it works because i connected my dell laptop to it. does any one know why its not working?? thanks!
-
I know that this question has been asked before, but i have to ask once again...What is the best way to import MODfiles into Final Cut? The files come from a JVC everio camera (i don't have exact product# on me). Heres what i already know: I have and
-
How to Use native keyword in java programming
Hi , I am using JDK 1.6.0_11 , and i was trying to create a java program using "native" keyword , i got the sample code for the same from the site : - http://www.javaworld.com/javaworld/javatips/jw-javatip23.html But when i type this command " C:\jav
-
hi For payment advise , i have done configurtion in BTE to send mail to vendor. When i chkd the mail , there is no attachment found. Is it necessary to apply note 1033893 . If nt necessary what may be problem? Is there any changes to be done in FM