Problem in Receiver JDBC Adapter

Hello Gurus,
I am trying SAP -> Oracle Database Scenario.
Where i am passing Id and Email address into the Oracle.
In Runtime workbench, Receiver JDBC adapter Channel, i am able to see that message is in Success.
But if i am going into the Database and looking for that Record, it is not updating that record.
I am not able to understand what is happening.
Please help me out in this issue.
Thanks,
Akhil

HI Akhil,
I know you might have verified alll datat hat will be passing to JDBC...but may I kindly request you to confirm about the table name that was passed in the Mapping once again.
While inserting or Updating are you using all the Key fields..that will allow you to create the unique entry..as if in case if the record is already exists then there may be problem of Indexing...of adding duplicate entry...and due to partial key fields Update statement will not work properly..
Also verify the ORACLE Database log...to get anymore details.
Thanks
Swarup

Similar Messages

Table name in Receiver JDBC Adapter

Hi All,
I am using receiver JDBC adapter.
But table name consist of " like BPC."#II" .
After mapping table name becomes BPC."#II" .
I am getting error while pulling data from DB.
Is the table name creating a problem.
Please remedy of this if you have come across such scenario.
Regards
Piyush

Hi Piyush,
All that i could get from the SAP Help regarding JDBC Adapters are these links where i never found anything much regarding the table name.anyways just go through these links and see if you find anything useful.
http://help.sap.com/bp_bpmv130/Documentation/Planning/XIUnicodeGuide030411.pdf
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm">Configuring the Receiver JDBC Adapter</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm">Mapping Lookups</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm">JDBC Adapter</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm">Configuring the Receiver JDBC Adapter - part 2</a>
This is all i got from the help files, anyways you can also go through those links and see if you find anything else useful.
- Escape Symbol for Apostrophe
The apostrophe character () is a reserved character in SQL syntax and is therefore replaced by an escape character if it occurs within value strings. This replacement character can be database-specific. Typical replacement characters are \ or (default value). If a character occurs that is invalid for the database being used, the adapter triggers an error message (an SQL exception) concerning the SQL syntax that is generated by the database.
- Column Name Delimiter
Depending on the database being used, column names can be enclosed by a special delimiter character, for example, if the names can contain special characters (such as ). This character can be specified at this point. The default setting is no delimiter character. If a character occurs that i
Also check if there are notes in the service market place related to the same.
Regards,
abhy
Message was edited by: Abhy Thomas

Sync Receiver JDBC Adapter

Hi All,
I was trying to make a synchronous call to a receiver jdbc adapter with the help of
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3928. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I am getting the following error in jdbc adapter.
<i>com.sap.aii.af.ra.ms.api.DeliveryException: ERROR:Processing request: Error when executing statement for table/stored proc. 'MISDetails': java.sql.SQLException: FATAL ERROR document format: structure 'STATEMENT', key element 'FiscalYear' contains no values</i>
My Source message is
<i><?xml version="1.0" encoding="UTF-8"?>
<ns:MT_FILE_OUT xmlns:ns="urn:ters">
<REQUEST>
    <FISCALYEAR>2007</FISCALYEAR>
    <YEARMONTH>1</YEARMONTH>
    <OPERATION>EQ</OPERATION>
</REQUEST>
</ns:MT_FILE_OUT></i>
And JDBC request message is ..
<i><?xml version="1.0" encoding="UTF-8"?>
<ns:MT_JDBC_REQ xmlns:ns="urn:ters">
<STATEMENT>
<TABLENAMEACTION="SELECT">
<TABLE>MISDetails</TABLE>
</TABLENAME>
<ACCESS>
<FiscalYear> </FiscalYear>
<YearMonth> </YearMonth><ProductCode> </ProductCode><TargetVolume> </TargetVolume>
</ACCESS>
<KEY>
<FiscalYear compareOperation="EQ">2007</FiscalYear>
</KEY>
</STATEMENT>
</ns:MT_JDBC_REQ></i>
Regards,
Sumit

Sumit, the problem is that </TABLENAME> is closed ealier than necessary.
This is how the JDBC datatype should be,
<?xml version="1.0" encoding="UTF-8"?>
<ns:MT_JDBC_REQ xmlns:ns="urn:ters">
<STATEMENT>
<TABLENAME ACTION="SELECT">
<TABLE>MISDetails</TABLE>
<ACCESS>
<FiscalYear> </FiscalYear>
<YearMonth> </YearMonth>
<ProductCode> </ProductCode>
<TargetVolume> </TargetVolume>
</ACCESS>
<KEY>
<FiscalYear compareOperation="EQ">2007</FiscalYear>
</KEY>
<b></TABLENAME></b>
</STATEMENT>
</ns:MT_JDBC_REQ>
The TABLE, ACCESS and KEY come under the TABLENAME tag.
Regards,
Bhavesh

Structure for Receiver Jdbc adapter for multiple tables

Hi,
For Receiver JDBC adapter,Standard structure
structure as
Statement
   Tablename(TABLE1)
        Action
        Access
Can i make a structure like
Statement
     Tablename(TABLE1)
        Action
        Access
            fields....
     Tablename(TABLE2)
        Action
        Access
            fields......
As i am using tables and I want to insert or update both of them or one based on some conditions.
Will Insert be possible in single Statement or I have to create separate statements for each table. Can you please help me on this?
Thanks in advance
Best Regards,
Harleen Kaur Chadha

Hi Harleen,
        As already said by Dharanveer, all that you need to do is replicate the Statement level, so, istead of using this structure:
Statement
Tablename(TABLE1)
   Action
   Access
     fields....
Tablename(TABLE2)
   Action
   Access
     fields......
        You will construct something like this:
Statement1
Tablename(TABLE1)
   Action
   Access
     fields....
Statement2
Tablename(TABLE2)
   Action
   Access
     fields......
       And this structure will be created in a single Data Type, that will be used to create a single Message Type, that you will use in your Message Mapping, and, the 2(or more tables that you need to manipulate) will be inserted/updated without problems using this approach.
       Thank you, and best regards,
       Wilson

Exactly-Once Handling in Receiver JDBC Adapter

Hi,
I have doubt abt Exactly-Once Handling in Receiver JDBC Adapter.
For Conflict Resolution as Database.
Why there is need to define table as below ?
In the database where the write-to tables are located you must create an additional table with two columns for this purpose. To define the table, specify the following:
Database Table Name
Enter the name of the table.
Key Column Name
Enter the name of the column in which the key is entered.
Value Column Name
Enter the name of the column in which the key value is entered.
Please explain in simple language.

Hi Abhishake,
Thanks for your reply.
I understant that the tables needs to be created in DB.
But if you read the SAP Docs for conflict resolution. My undestanding is "During Database commit if AS Java is terminated then the message will be in unknown state, for this type of messgaes when the AS Java restarted the behaviour is defined by this parameters. If the message doesn't have primary key, then there is probablity when AS Java will try second time it may get the message in DB so a message can be duplicated. To avoid this condition it is mentioned that you must create additional table with three column".
Please correct my understanding if I am wrong.
My additional table needs to create & how it will resolve the problem.
Thanks in advance.

Problem in sender JDBC adapter

hello,
I am facing one typical problem in sender JDBC adapter.
Here is the issue,
JDBC API method getString threw an exception: java.sql.SQLException: Cursor state not valid.
Can anyone please help me out in solving this problem?
Actually after a retry of 3 times the message has been successfully sent. Till then i am getting these error
On 1st attempt ,
Error during conversion of query result to XML java.sql.SQLException: Cursor state not valid
On 2nd attempt,
Error during conversion of query result to XML java.sql.SQLException: Internal driver error
(class.java.lang.InterruptedException)
On 3rd attempt,
Processing finished successfully.
This is the scenario that i can see in the audit log.
Can you please help me out in solving this issue.
Thanks,
Soorya

Hi gaurav,
It was a good response from your side.
I have gone through the FAQ but could not able to find anything.
Can you please help me out in this regard ?
Also i am using select query of this kind,
SELECT
SEFVHRC.VHRBRCD,SEFVHRC.VHRCUCD,SEFVHRC.VHRVIN,SEFVHRC.VHRMOCD,SEFVHRC.VHRCHAS,
SEFVHRC.VHRSLOR,SEFVHRC.VHRDIVI,SEFVHRC.VHRMGCD,SEFVHRC.VHRMOCH,SEFVHRC.VHRVHTY,
SEFVHRC.VHRBDTY,SEFVHRC.VHRMFYR,SEFVHRC.VHRMOYR,SEFVHRC.VHRMODS,
SEFVHRC.VHRMDTL,SEFVHRC.VHRCLBR,SEFVHRC.VHRRCID,SEFVHRC.VHRARDT,
SEFVHRC.VHRLUTM,SEFVHRC.VHRLUDT,SEFVHRC.VHRKEYN,SEFVHRC.VHRCTORN,
SEFVHRC.VHRCTIMP,SEFVHRC.VHRPRDT,SEFVHRC.VHRPRDT,SEFVHRC.VHRRCDT,
SEFVHFT.VHFCLCD,SEFVHFT.VHFCAT,SEFVHFT.VHFCADSC,SEFVHFT.VHFKEY,SEFVHFT.VHFTEXT1,
SEFVHFT.VHFTEXT2,SEFVHFT.VHFTEXT3,SEFVHFT.VHFTEXT4
FROM
SAPTESTLIB.SEFVHRC,SAPTESTLIB.SEFVHFT
WHERE
SEFVHRC.VHRVIN = SEFVHFT.VHFVIN AND SEFVHRC.VHRSTTS = ' '
and update query of this kind,
Update SEFVHRC SET VHRSTTS = 'R' WHERE VHRSTTS = ' '
I am using prity big select query. is there any option to optimize it?
Can you please help me out in solving this problem
urs,
Soorya

How to handle BLOB field in receiver JDBC adapter into ABAP table

Dear Experts,
I am working in a synchronous scenario with Sender ABAP Proxy to Oracle Database as receiver via SAP PO 7.4.I will be calling a stored procedure view with fields ID, NAME,Age,*** and BLOB (Image binary).
1. The response from Oracle Database field BLOB is to be stored in ABAP table.Would I have to write any JAVA program to read the BLOB or the receiver JDBC adapter will handle it and store in a table by using ABAP proxy once it reaches ECC.
2. If yes, would the JAVA program have to deal with other 4 fields.
3. Can I use a UDF mapping to this BLOB field.
Regards
Rebecca...

Dear Praveen,
Thanks for your response...
Please correct me if I am wrong.
1. For 1-1 response mapping for BLOB field, I will use just use the below UDF code.
public static byte[] hexStringToByteArray(String s) {
            int len = s.length();
            byte[] data = new byte[len / 2];
            for (int i = 0; i < len; i += 2) {
                        data[i / 2] = (byte) ((Character.digit(s.charAt(i), 16) << 4)
                                                                                     + Character.digit(s.charAt(i+1), 16));
            return data;
2. ===Using the byte data, create binary attachment in mapping for abap proxy response===
Could you please share how to create the binary attachment.. I am not clear
Regards...

Receiver jdbc adapter:how to implement the insert or update action in a sql

Hi,gurus:
I'm using receiver jdbc adapter now.
You know, we have to gave the action the value 'update' or 'insert',but in our case,the action is variant--update or insert.It decides whether the record exists in the outer database.
Can stored procedure do this?If I use stored procedure,then must I create a stored procedure in the outer database?
Or some other ways to solute my issue?
THanks in advance.

Hi
Use Action UPDATE_INSERT .
This action check if a record exist with same key value then update that record. In case no record with key value found in database then record inserted to database.
look receiver structure
http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm

Messages are in hold state due to one message at receiver JDBC adapter

Hello,
I am using a receiver JDBC adapter and trying to send an XML file which has an insert query to insert some data into the database i.e., Oracle 9i.
Here at the receiver side due to one message ( which is in to be delivered state) all other messages are got hold and waiting for long time.
I am getting the exceptions as this,
JDBC Adapter processing failed with Error processing request in sax parser: Error when executing statement for table/stored proc. 'FSASMGR.XTBL_KL06_IINQUIRY' (structure 'REC01'): java.sql.SQLException: ORA-12899: value too large for column "FSASMGR"."XTBL_KL06_IINQUIRY"."CASE_TITLE" (actual: 81, maximum: 80)
Exception caught when executing statement for table/stored proc. 'FSASMGR.XTBL_KL01_ISTAFF_MST' (structure 'REC1'):
java.sql.SQLException: ORA-00001: unique constraint (FSASMGR.XTBL_KL01_ISTAFF_MST) violated
Can anyone help me out in solving this issue.
THanks,
Soorya

hi surya,
jdbc channel tries a request for n number of times(no of rettries),if that request fails it will take up the following requests,its not like it will process a request forever.
to be delivered will be resulting if reciever is down or network between XI and database server is bad.
try to ping databse server from XI host system.
if everything is fine then look at the channel configuration->advanced->no of retries of database transaction on sql server.
just redue the count to 1 and recheck.
Regards,
rama Krishna

Multiple table insert using receiver jdbc adapter

Hi,
I am trying to insert data in to two tables in a single structure using receiver jdbc adapter. I am not using any stored procedure to insert data instead directly inserting the data using PI. Please see the structure I am using.
SOURCE side:
DT_ABC_SENDER
--IT_HEADER_TEXT
-- EBELN
-- LINENO
--TDTEXT
--IT_ITEM_TEXT
-- EBELN
-- LINENO
--TDLINE
TARGET side:
DT_ABC_RECEIVER
--InsertStatement
     --HEADER_TEXT
            -- action                         (insert)
            -- Table                          (Table 1)
            --access
                 -- IDS_ENQ_NO
                 -- IDS_DESC
                 -- IDS_TEXT
   --ITEM_TEXT
            -- action                         (insert)
            -- Table                          (Table 2)
            --access
                 -- IIS_ENQ_NO
                 -- IIS_DESC
                 -- IIS_TEXT
Using the above structure I am able to successfully insert the data in Table 1 but data is not getting inserted in Table 2.
In sxmb_moni it is saying message successfully delivered but I but there is data insertion took place in Table 2.
Please help me urgently.
Thanks in advance.
Neeeraj

Hi Neeraj,
Add --InsertStatement statement for the second table structure in the same level of first InsertStatement.
Target structure like this:
DT_ABC_RECEIVER
--InsertStatement
     --HEADER_TEXT
            -- action                         (insert)
            -- Table                          (Table 1)
            --access
                 -- IDS_ENQ_NO
                 -- IDS_DESC
                 -- IDS_TEXT
--InsertStatement
   --ITEM_TEXT
            -- action                         (insert)
            -- Table                          (Table 2)
            --access
                 -- IIS_ENQ_NO
                 -- IIS_DESC
                 -- IIS_TEXT

When would you write a stored procedure in sender/receiver jdbc adapter

Hi Everybody
Can you tell any situation where you would need to write a stored procedure in the query sql statement of sender/ receiver jdbc adapter instead of writing SELECT statement there
why do we need to write stored procedures
thanks and regards,
Anitha

Hi Anitha,
why do we need to write stored procedures
Some times a single SQL statement will not suffice for ur transactions....
Say u want to access from 2 tables and update based on some condition..
or nested select statement...
or u want to update a 2 nd table based on the values from 1st table... etc..
In those places it's preferable for going for a Stored Procedure.
The Stored Procedure can be used in both Sender and Receiver JDBC Adapter.
Still nt clarified do post..
Babu

Using Stored procedure in sender or receiver jdbc adapter

Hi All,
Please let me know simple blogs for Stored procedure used in sender or receiver jdbc adapter to get data from 2-3 tables
Thanks

Hi
To work with Store proceudres (SP) you have to create the SP's in database like Oracle, Mssql or Msaccess.
Ususally the SP creations are done by database experts. For more info about "SP" try Googling!
The below blog is about SP but not the one you expect!
/people/itisha.alok/blog/2009/03/23/jdbc-stored-procedure-returning-multiple-resultsets
Executing an Oracle Stored Procedure from Sender JDBC adapter
Sender Adapter - -
SP will contain the select Query alone or with it will contain insert, delete statement too.
Receiver:
SP will have insert or delete satement.
Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
The below details are required to configure the adapters
Driver details
database name
Procedure name
user name
password,
Regards
Ramg

Dml in Receiver JDBC ADAPTER

Dear all,
By putting action=Insert in the Receiver Structure ,I could able to insert the data.
When I am Trying Delete or Update in the Same way I could not see the data modified in the table.
Please Let me know how to achieve the same.
Thanks,
Srinivas

Hi,
go thru these links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
http://help.sap.com/saphelp_nw2004s/helpdata/en/4d/8c103e05df2e4b95cbcc68fed61705/frameset.htm
Also have alook at this
Receiver JDBC
/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/ajay.kumar/blog/2005/03/24/writing-bsp-for-sap-r3-version-46
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
/people/sanyam.kapur/blog/2005/04/30/custom-fields-and-bw-extractors-making-a-mixed-marriage-work-part-ii
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
Akshay Jamgaonkar

What are the Batch mode parameters for Receiver JDBC Adapter

Hi All,
Could some pls tell me how to set bacth mode in receiver JDBC adapter and what are its parameters and how to configure them. i beleive there is something like max count parameters etc..
Regards,
Xier

Hi,
Check this for more info
http://help.sap.com/saphelp_nw04s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
Regards
Seshagiri

UPDATE statement in Receiver JDBC adapter

Hi all,
I would like to use UPDATE statement in my receiver JDBC adapter and would like to know how this UPDATE statement works in following case.
1) If i have 10 records to be updated in database, whether Commit happens at the end of all 10 records updation OR it will be for every record update?
Regards

Hi,
Then let me construct my query this way...
i have 10 records that needs to be updated to database, say For Ex: 7 records are updated successfully and 8th record has issue in updating the table.
In this case i would like to ROLLBACK entire 10 records with out committing any thing.
So if i use your 2nd option, it should perform as i expected right?
Regards

Problem in Receiver JDBC Adapter

Similar Messages

Maybe you are looking for