Problem in related to MIRO-CM

Hi Guru,
We have an issue in MIRO-CM - The background we processed an invoice for goods 50 cs according to invoice and PO (the quantity of invoice is equal to PO), then these goods are need to be returned, also done in system. Now we have received the related invoice for return to do MIRO-CM but message tell that No suitable item found for PO 55000783, when we click check button to continue another message "PO item 55000783 00620 does not allow invoice receipt. How can we proceed to do the CM?
Thanks,
Memars

THE ABOVE SCENARIO IS THIRD PARTY   PROCESS ,
IN THIS PROCESS   GR IS   A STATISTICAL GR ONLY,
IN THIS   PO   IN INVOICE TAB WE CAN   SEE   THAT   GR-BASED INVOICE NOT CHECKED,
THIS IS BECAUSE OF   THE   ITEM CATEGORY USED IN THE   SALES ORDER (TAS),
AND IN THE PO   ACCOUNT ASSINGNMENT CATEGORY = 1(THIRD PARTY),
FOR THIS ACCOUNT ASSINGNMENT CATEGORY = 1,THERE IS NO GR ALLOWED ONLY   INVOICE ALLOWED,
YOU CHECK IN TCODE = OME9,ACCOUNT ASSINGNMENT CATECORY =1,
REGARDS

Similar Messages

Problem while postings a MIRO for partial deliveries.

Hi,
We ar facing a problem
while posting a Miro for the Planned delivery costs for the import orders.
when we receive an item in partial consignment of the same order.
The system will allow for the first time to post the deliver cost, after this the MIGO and MIRO will be done and cycle will be completed.
For the second remaining consignment, the system is not allowing to post the Miro itself for the delivery costs.
IT is giving an error message."Quantity invoiced greater than goods receipt quantity."
We have disable GR based IV in PO
Provide me the solution.
Sunil

hi,
i hope you have done the following steps
1) for import do MIRO first for the custom duties ( CVD, Edu Cess, S& H Cess on CVD) by selecting planned delivery cost.
2) J1IEX ( capture) referencing material document number of MIRO.
3) MIGO of the qty received.
4) J1IEX ( post).
follow the same steps for the next consignment.
what I see is that you have mentioned the full qty against the value in MIRO.
say ur PO qty is 10 and your partial shipment is of qty 5.
then in first MIRO entry enter qty as 5 not 10.
pl check your material documents of MIRO and MIGO and see what qty you have entered.
Thanks and regard
Rajesh

Problem using relative sizes on a HTMLtext

Hi
I have a problem using relative sizes on a HTMLtext on Flash
ActionsScript
2.0
Something like:
htmltext= '<font size="+5">TITLE</font>Text
Praragraph...'
(+5 in normal HTML means is 5 points bigger than the standard
text.)
I create the the textArea i set the size and everything if I
do it by
actionscript everything works fine except when i setup the
htmltext, the
text disspears so I need to re-set the embeded font with:
myTextFormat.font = Varfont;
textBox.embedFonts = true;
textBox.setTextFormat(myTextFormat);
But using this lines I lose the previous size. that i
assigned before when i
created the textarea. And goes to a standard size... dont
know why, i am
using a different TextFormat.....
And If i want to use the size i was using , all the text
becomes the same
size (but is the size that I want)...
If I create the text area manually using the gui, it works
well.
¬_¬
>-------------------------------------------------------------------------------------<
The main problem is... why the the text dissapears when i set
a new html
text???
>-------------------------------------------------------------------------------------<
Thanks.

1. Really there are a few functions that i skiped yesterday:
3. The font is linked and embeded in library.
public function setHTMLText(texto:String):Void {
textBox.html = true;
textBox.htmlText = texto;
public function setEmbedFont(__font) {
_font = __font;
_embed = true;
setTextStyle(__font);
public function setTextStyle(__font:String, __bold:Boolean,
__underline:Boolean, __italic:Boolean) {
var myTextFormat:TextFormat = new TextFormat();
myTextFormat.font = _font;
textBox.setTextFormat(myTextFormat);
public function setTextSize(__size:Number) {
var myTextSize:TextFormat = new TextFormat();
myTextSize.size = _size;
textBox.setTextFormat(myTextSize);
Kind of constructor:
autotext_txt.setTextSize(20);
//1 if I activate this one the text will dissapear after
asigning a new
text. And I will need to apply the embed font again.
autotext_txt.setEmbedFont("Arial2");
autotext_txt.setHTMLText(This is a text (big text) | <font
size="-5"
color="#dddddd"> Small Text</font>');
autotext_txt.setEmbedFont("Arial2");
Why dont u have a try?
Thanks,
J
"kglad" <[email protected]> escribió en
el mensaje
news:elo6bk$pu3$[email protected]..
> 1. where's Varfont defined?
> 2. htmtext should be htmlText.
> 3. have you defined a linkage id for a library font?

I get a a message "javascript: void (0)" when I turn on online radio. This problem is related also with other browsers. I reinstalled java but nothing changed

This problem is related also with chrome, opera and explorer. I reinstalled java but nothing changed

To avoid confusion:
*http://kb.mozillazine.org/JavaScript_is_not_Java
Note the javascript: void(0); is often use as a placeholder URL to indicate that an onclick event is tied to the link to do the actual action.<br />
If JavaScript is blocked for some reason then this javascript: void(0); links comes into view.
Make sure that you do not block JavaScript.
*http://kb.mozillazine.org/JavaScript
Also make sure that your security software isn't blocking JavaScript if it happens in other browsers as well.
You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Workflow Related to MIRO

Hi Guys,
Do we have any standard Worflow given by SAP relating to MIRO.
Regards,
Madhu.

Hi
Please check below the standard worklow
WS 20000397
WS 20001003
WS 20001004
Thanks
Arghadip

Bsod Problem, Bios Related?? ati2cqag.dll?? Plz Help Guys

well i have quite a problem here and i dont know if the bios is related to it.
my specs are:
msi k9ngm-l (V3.7b1 bios)
amd 64 x2 5600+ (2.9ghz)
4 gb ram (though i see only 3 because of xp)
radeon hd 4850 512mb
for about 2 weeks im having wierd bsod during gamming but usualy its when i quit a game, before it gets back to desktop it will bsod. when i get the bsod it says the cause is FAULT_IN_NONPAGED_AREA and related to ati2cqag.dll
ive updated my graphic card driver, didnt help, downgraded version of driver, didnt help, i must point that one of the "uninstall" drivers went wrong and gave me some trouble but ive cleared all the files, registry keys and installed again new drivers. the bsod didnt stop. ive then tan memtest for 4 hours, no faulty ram according to it. i can play fine, no drop in frames its normal, its just crashes randomly.ive stressed the gpu and its fine. ive searched for answers but cant find the problem. any help would be great. thanks in advance

Do memory check with >>Memtest86<<
List PSU brand with details, look over PSU sticker.
"amd 64 x2 5600+ (2.9ghz)
4 gb ram"
That's 2 or 4 memory sticks?

Problem in T-code- MIRO

Dear Cons
In posting of incoming invoice through T-code- MIRO, we are getting one type of No range series. Let say 11 series. Now we want to bifercate it . that means EXCISE RELATED invoice ( tax code) case the system will generate other no. range series. LET SAY 12* SERIES. I checked from the menu path IMG-M.M- LOGISTIC INV. VERI.-INC. INV-NO.ASSIGN-MAINTAIN NO. ASSIGN FOR ACCT. DOCUMENT. wE HAVE SELECTED doc type- RE with 11* no. range. how can we assign 12* series no. range with creating a new doc. type by coping RE so that for excise related INV. case the system will provide 12* series no. range for inv. document.
Edited by: nirupama swain on May 5, 2010 10:15 AM

If u talking about LIV number range and not of LIV accounting document number range
IF u talking about LIV number range then in std sap its not possible to have 2 number ranges, and In LIV if u Change RE to other then it will change LIV accounting document number range and not LIV number range
Any way if u want to change number range than u can make use of following user exit
LMR1M003 Number assignment in Logistics Invoice Verification
hope this heklps

Batch editing ratings problems (Beatunes related)

Is there a windows script that would enable to batch edit ratings in both the iTunes library, and within each mp3?
Secondly, is there a way to enable half star ratings in the latest 64bit version of iTunes (running on 64bit Windows 8.1 Enterprise)?
I've never used half star ratings on my iTunes library, and upon reading, am not certain if this is possible anymore.
For the last few months, I've been using Beatunes to organize my large sized iTunes library, but seem to have hit some glitches related to ratings.
In short, when I access my Itunes library via Beatunes, about 5000 songs appear to have "1/2" in the rating field.
Itunes library seems to see these songs as having no rating.
Beatunes does not allow ratings to be edited, and since the 1/2 is not seen in iTunes, I would select all those songs and use an empty tag (such as "Show") and designate the value as "Half". In iTunes, I would then select the "Show" column, and highlight all the songs with "Half" in the "Show" column, right click, and change the rating value for all songs. For testing purposes, I changed all songs to have 2 stars. When I sync the Beatunes database to the iTunes database, eventually the Beatuens ratings change to 2 stars (sometimes, it takes a few syncs).
I would then go back to iTunes, right click on all selected songs, and change rating value to "None". Most ratings change to empty values, while some decide to take on hollow star values, which is really really annoying.
I then used Steve MacGuire's ClearTrackAutoRating script on those selected tracks:
http://samsoft.org.uk/iTunes/scripts.asp
When I sync the Beatunes database with the iTunes database, the songs I had rated 2 stars go back to "1/2" rating, and not an empty field.
I can't figure out what is triggering this.
I've started a thread in Beatunes forum (http://help.beatunes.com/discussions/problems/40759-half-star-ratings-problems), but figured I would start one here to ask for advice, or see if there are any other scripts I should consider trying. At this time, I have not heard back from the developer, as I just posted it a few hours ago.
One of the things I just tried doing was enabling iTunes to use half star ratings (so i could see the 1/2 rated songs would then show), but I have not been able to figure out how to do this. The most common way of altering iTunesPrefs.xml did not do anything for me:
http://blog.beatunes.com/2011/08/showing-half-star-ratings-in-itunes.html
http://www.instructables.com/id/How-To-Enable-Half-Stars-In-Itunes/
Hence why I was wondering if this hack still works on 64bit version of iTunes (running on 64bit Windows 8.1 Enterprise).
I also came across this:
http://www.nextofwindows.com/interesting-tip-how-to-enable-half-star-rating-in-i tunes-in-windows/
They suggest adding:<key>storefront</key> <string>143441-1,12</string> at the end of iTunesPrefs.xml
This is confusing, because my prefs already contain the following at the end:
<key>storefront</key> <string>143455-6,17</string>
Am I supposed to keep my existent, and just add after, or do I replace what is there?
Any help/advice would be very much appreciated.

Hi there...
I've had a quick check and the iTunesPrefs.xml hack works for me to enable half-ratings. Tested on iTunes 11.1.5 running on Windows 7 32-bit, but no reason to expect platform differences. This build displays ½ rather than a half-star. Once enabled you can set half-ratings via the iTunes interface. I haven't set back yet but presumably they will disappear if I do.
The album and track ratin properties take a value from 0% to 100%. If 0% iTunes will offer a track-auto rating based on any manual album rating and an album auto-rating based upon manual track ratings. My scripts set a manual rating of 1% which iTunes treats as less than ½ and so displays as no rating, but it suppresses any auto-rating. Presumably Beatunes is treating anything from 1%-10% as ½ star, 11%-20% as 1 star, and so on. For iTunes from 0%-9% is no stars, 10%-19% is ½ star, 20%-29% is 1 star, etc., with bigger ranges when half-ratings are not enabled.
My scripts page already has ResetAlbumAutoRating and ResetTrackAutoRating scripts if you need to remove those 1% values, or you can simply set a new rating and then remove it.
What additional batch rating task do you have in mind?
tt2

Problem in relational blocks(Parent Child Grand Child

Hi all
I am working on Oracle Forms 10g Release-2.
I am facing a problem in a form which consists three relational block. Blocks are organised as below:
1.Parent >> 2.Child. >> 3.Grand Child.
In 2.Child Block I have multiple records, each record has detail records in Grand Child block. Now if I move cursor from parent block to child block in a record(2nd,3rd or any other) other than first record for the first time, the child and grand child blocks flash out automatically.But if click on first record of child block for the fisrt time, then this problem is not happening.In Grand child block I am not facing this kind of problem.
Thanks
Mokarem.

'Flash out' means Child block and grand child block is cleared autromatically, if I navidate to the child block for the first time. But if I navigate to first record of child block then I am not getting this problem, but if I click 2nd or higher then this problem is happening.
Thanks
Mokarem.

Problem Using Relational Operators !!

The code given under is not working corretly. The problem is stated as comments in the program.
if(result.next())
String temp_no=t_no.getText();
String temp_nm=t_name.getText();
String temp_result1= result.getString(2);
String temp_result2= result.getString(3);
if(temp_no!=temp_result1) // The condition is always true.Even if i give the same no & name as in database!! Why is it so?
JOptionPane.showMessageDialog(cdFrame, new String("There Is No Disc With The Specified Number !!"));
else
if(temp_nm!=temp_result2)
JOptionPane.showMessageDialog(cdFrame, new String("There Is No Disc With The Specified Name !!"));
else
upd.executeUpdate();
JOptionPane.showMessageDialog(cdFrame, new String("DATA HAS BEEN UPDATED !!"));
else
JOptionPane.showMessageDialog(cdFrame, new String("There Is No Such Disc As Stated In Old Data !!"));
} The Program compiles properly and gives no runtime error. What's the problem!!

yes dude, u can't use relational operators for objects.. its works only on simple data types..

Problem deploying related EJBs in separate JARs

I have 2 entity EJBs, User and Address, in separate JAR files. The User bean
has business methods to get and set its related address as follows:
void setAddressPK(AddressPK newAddress) throws java.rmi.RemoteException;
AddressPK getAddressPK() java.rmi.RemoteException;
When I try and load User.jar in the EJB Deployment tool it complains that it
can't find the AddressPK class. However, I can get round this by explicitly
adding Address.jar to the classpath.
When I actually deploy and use the User bean I do NOT need Address.jar on
the classpath, although I do get warnings during deployment.
So my question is how do I package and deploy related EJBs. I don't want to
have to have all my EJBs in the same JAR, nor do I want to have the same
classes in more than one JAR. Is what I'm doing correct - am I supposed to
have Address.jar on the classpath? And what about an utility classes that
are shared between EJBs - where do I put those?
Thanks in advance,
Steve.

I resolved the problem be making sure that my deployment
jars don't appear in my servlet classpath....
Jason
Jeff Wang <[email protected]> wrote in message news:[email protected]...
In general, if two beans are related (i.e. you can not compile one
without the other being on the classpath) and they are both deployed
they should be in the same jar file. If you do not deploy one of them,
then the undeployed bean can be in the weblogic.class.path with no
problem.
I suspect that you are getting a ClassCastException because you have the
deployment jars in your weblogic.class.path (or java classpath.) Remove
them, and see if the error is resolved.
Jeff Wang
WLCS 2.0 Software Engineer
Jason Rosenberg wrote:
Does the same apply for beans of different types? In other words, do
I need to have an entity bean and a session bean which wraps the entity
bean in the same jar file?
I am having a problem accessing a session bean from a JSP servlet. I get
the dreaded ClassCastException. I don't get this problem, however, if
I access the session bean directly from a stand-alone java client. It's
only when I access the session bean via JSP....
Any ideas?
Jason
Jeff Wang <[email protected]> wrote in message news:[email protected]...
What you should have in the .jar files are:
the home (say it is called <bean>home.class)
the remote (say it is called <bean>.class)
the impl (say it is called <bean>impl.class)
These are the only ones that should be in the .jar file. (not even the
PK should be there, for an entity bean.) All the support classes should
be in weblogic.class.path If you have cross jar dependencies,
unfortunately, you will have to specify the jar in the
weblogic.class.path... However, this is not a good idea, as you will
have 2 class files in memory. At the very least, you will not be able
to do hot deploy. Depending on your code, you'll have a "class cast
exception <bean> can not be casted to an object of <bean>" (Something
like that, I don't have the exact error in front of me.) In your
example it is probably better to put User and Address in the same jar.
Jeff Wang
WLCS 2.0 Software Engineer
Steve Ward wrote:
I have 2 entity EJBs, User and Address, in separate JAR files. The User bean
has business methods to get and set its related address as follows:
void setAddressPK(AddressPK newAddress) throws java.rmi.RemoteException;
AddressPK getAddressPK() java.rmi.RemoteException;
When I try and load User.jar in the EJB Deployment tool it complains that it
can't find the AddressPK class. However, I can get round this by explicitly
adding Address.jar to the classpath.
When I actually deploy and use the User bean I do NOT need Address.jar on
the classpath, although I do get warnings during deployment.
So my question is how do I package and deploy related EJBs. I don't want to
have to have all my EJBs in the same JAR, nor do I want to have the same
classes in more than one JAR. Is what I'm doing correct - am I supposed to
have Address.jar on the classpath? And what about an utility classes that
are shared between EJBs - where do I put those?
Thanks in advance,
Steve.

N95 autofocus problem software related

I've had an N95 for more than a year. Part of the reason I bought it was the 8 GB - could take lots of pictures and video. I'm very disappointed. For reference, I am an eye doctor. I know a lot about prescribing glasses, I know optics, and I have done quite a lot of photography.
As with most cameras, the N95 "take picture" key may be partly depressed to get the focus, then fully depressed to actually take the picture. (Auto mode.) It then takes sharp pictures, if lighting conditions are right, and the phone is held steadily.
It can focus on everything from 20 cm or so to infinity. (Try partly depressing the button, you'll see the picture go in and out of focus, then fix on the sharpest setting.) (With some of the other modes, EG landscape, the focus is "fixed," IE, the camera does not try to autofocus, and you can take pictures a lot quicker.)
So - the fact is established - the N95 hardware is capable of mechanical focussing, and some of its software can also detect which focus setting is the best. So it is not "handicapped" from birth. It should be possible to do something sensible with it. However, it behaves as a gifted child with an attitude problem. "No, mommy, I don't WANT to do homework!" (It's not that the homework is too hard.)
However, there are three big problems:
1) In "landscape" mode, the focus is not on infinity, it is closer. Thus, pictures of faraway objects taken in this mode are not sharp.
2) The most vexing. When in video mode THE FOCAL LENGTH IS FIXED - and cannot be adjusted. Mine is sharp at 30-50 cm, but out of focus at distance. It SHOULD BE SHARP AT INFINITY! Who's interested in filming stuff at 30 cm distance? I cannot express with a keyboard alone how annoyed I've been. Sometimes I've put my eyeglasses (I'm nearsighted) over the lens, and the video becomes a lot better.
3) There is no way to adjust focus "manually," even though it should be technically possible.
So, spare me the condescending stuff about image compression, light conditions etc. **bleep**! And, YES, of course I have set the "video quality" to "TV high quality." Doesn't help. THE PROBLEM IS PURELY OPTICAL! Otherwise my eyeglasses would not help. No, they don't enlarge the image, they just help the focus. (And, no, you cannot borrow my glasses )
I've seen a lot of other discussions about this issue with the N95. None of them seem to give a good answer. Neither have I found a way of taking charge over the focal length. So, my questions are:
*    Has Nokia come up with a solution? Has anyone who has sent the N95 in for service actually gotten some help?
*    Is there some other software one can install that can do a better job than the **bleep** cam software of Nokia?
*    Is it possible to hack or tweak the existing software to change the set points for video? (I assume it goes into a mode like this: "Set focus at 034, resolution at VGA" etc. The "034" (a totally random number, not related to anything) doesn't fix on infinity. Could I hack the setting so that it goes "Set focus at 015, resolution at VGA"? (Of course, one would have to change numbers a couple of times to get it right.)
The N95 promised so much, but delivers so little (the camera is not the only problem), it is giving me an ulcer. Next time I'm not really motivated to get a Nokia! I want revenge. Apple, can you make me happy?

Just a little addon - yes, I have the latest software / firmware updates installed.

Problem in BDC for MIRO.....................

Hi friends,
I am using BDC for MIRO....In screen number 6220 where POs and items are to filled in table control where i need to fill 100 records... When i am using page down option during recording it is capturing function code as /OO .But while running BDC program this function code /OO is becoming ineffective..means page down is not happening when '/OO' is executed....can anybody help me out in what can be done in solving the problem...
Regards.

Hi Raju,
But our requirement is to to do the recording only till all the items are filled in the pop up screen..As no page-down button is available in the screen...i guess that is why page-down activity done from key-board is not working fine......Any suggestions from ur side........
Regards.

Problems with relative positioning divs

Hi all,
I'm still new to this css layouts thing, but am stumped by this problem. I have numerous parent divs with multiple child divs within them on my page design, and for some reason these child divs are not taking up the correct spacing that I enter in the CSS. They are all relative positioned, mostly using floats and clears (and I don't think I've missed any of those). Help! Hoping that it's something simple I've missed.
To pinpoint one example of this recurring problem, the #sidenav_one div will float: left with a spacing of top 8px and left 8px, but then #sidenav_two refuses to float: left, clear: both with a spacing of top 8px (I've had to put in 16px to actually get 8px, in both Firefox, Safari and Opera). (relevant parts of code highlighted).
I am happy to change how I've structured the page, if people think there is a better or cleaner way to do it. Thanks in advance.
A
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>United Future Foundation</title>
<style type="text/css">

</style>
<script type="text/JavaScript" src="curvycorners.js"></script>
<script type="text/JavaScript">
window.onload = function() {
    var settings = {
      tl: { radius: 5 },
      tr: { radius: 5 },
      bl: { radius: 5 },
      br: { radius: 5 },
      antiAlias: true
    var divObj = document.getElementById(".rounded");
    curvyCorners(settings, divObj);
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
</head>
<body onload="MM_preloadImages('images/news_down.jpg','images/about_down.jpg','images/what_up.j pg','images/who_down.jpg','images/support_down.jpg','images/contact_down.jpg')">
<div class="rounded" id="container">
<div class="rounded" id="banner">
<div id="banner_left"><img src="banner_uff.jpg" width="450" height="70" /></div>
<div id="banner_right"><img src="ufflogo.jpg" width="208" height="200" /></div>
<div id="banner_name"><img src="banner_name.gif" width="509" height="133" /></div>
</div>
<div id="spot">you are here</div>
<div class="rounded" id="content">
<div id="text">
<h2> Breaking the Cycle - United Future Foundation</h2>
<p>United Future Foundation is an Australian non-government organisation operating in Uganda. UFF is “breaking the cycle” through education. We believe that education is the primary means of creating lasting change, increasing literacy and improving employment. UFF is building a combined primary school and vocational training centre for over 300 students in the Kasanje region of Uganda. </p>
<p>United Future Foundation is focussed on facilitating access to education and skills training for disadvantaged youth in poverty stricken and remote areas of Uganda. We strongly believe that education is the first and foremost method to break the cycle of illiteracy, ill health and lack of opportunities. </p>
</div>
<div class="rounded" id="sidenav_one">
    <h1>News</h1>
</div>
<div class="rounded" id="sidenav_two">
<h1>Press Releases</h1>
</div>
<div class="rounded" id="sidenav_three">
    <h1>Media</h1>
</div>
<div id="home_home"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('home','','images/news_down.jpg',1)"><img src="images/news_up.jpg" name="home" width="250" height="188" border="0" id="home" /></a></div>
<div id="home_about"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('about','','images/about_down.jpg',1)"><img src="images/about_up.jpg" name="about" width="250" height="188" border="0" id="about" /></a></div>
<div id="home_events"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('events','','images/what_up.jpg',1)"><img src="images/what_down.jpg" name="events" width="250" height="188" border="0" id="events" /></a> </div>
</div>
</div>
</body>
</html>

This is much simpler than you would think. You're making it hard work for yourself because you believe css is much more comlex than it really is or need be.
You rarely need to use relative positioning at all. You are using too many <divs> and redundant css attributes to reach your goals.
Think of the web as a simple structure of boxes and ino those boxes you place html tags or 'when' needed other <divs> ('when' is the choice word here. In time you will know when and when not to)
Copy the css and page code below and paste into a new Dreamweaver document. See how much leaner and cleaner the css and html code is.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<style type="text/css">
body {
font-family: "Myriad Pro", "Helvetica Neue", sans-serif;
p {
font-family: "Myriad Pro", "Helvetica Neue", sans-serif;
font-size: 14px;
color: #000;
.rounded {
-moz-border-radius:5px;
-webkit-border-radius:5px;
#spot {
text-align: right;
#container {
margin: 0 auto; /* horizontally centers container which has a width */
margin-top: 15px;
width: 972px;
background-color: #999;
padding-bottom: 25px;
overflow: hidden; /* a method to clear floated containers within a parent container */
#banner {
width: 872px;
height:210px;
background-color: #FFF;
margin: 0 auto; /* horizontally centers container which has a width */
margin-top: 15px;
color: #999;
#banner_left {
width:509px;
float: left;
margin-left: 5px;
margin-top: 5px;
#banner_right {
width:208px;
height:200px;
float: right;
margin-right: 5px;
margin-top: 5px;
#banner_name {
position:relative;
width:550px;
height:140px;
clear: both;
margin-left: 5px;
#content {
margin: 0 auto; /* horizontally centers container which has a width */
width:872px;
background-color: #FFF;
margin-top: 20px;
overflow: hidden; /* a method to clear floated containers within a parent container */
#sidenav {
margin-left:8px;
margin-top:8px;
width:136px;
float: left;
h1 {
font-size: 16px;
color: #000;
text-align: center;
background-color: #999;
padding: 10px 0 10px 0; /* short hand for top/right/bottom/left */
margin: 0 0 6px 0; /* short hand for top/right/bottom/left */
#text {
margin: 8px 0 0 18px; /* short hand for top/right/bottom/left */
width:700px;
background-color: #FFF;
float: left;
#home_home {
width:750px;
height:188px;
clear: both;
margin: 10px 0 0 31px; /* short hand for top/right/bottom/left */
#home_home img {
float: left;
</style>
</head>
<body>
<div class="rounded" id="container">
<div id="spot">you are here</div>
<div class="rounded" id="banner">
<div id="banner_left"><img src="banner_uff.jpg" width="450" height="70" /><img src="banner_name.gif" width="509" height="133" /></div>
<div id="banner_right"><img src="ufflogo.jpg" width="208" height="200" /></div>
</div>
<div class="rounded" id="content">
<div class="rounded" id="sidenav">
    <h1>News</h1>
    <h1>Press Releases</h1>
    <h1>Media</h1>
</div>
<div id="text">
<h2> Breaking the Cycle - United Future Foundation</h2>
<p>United Future Foundation is an Australian non-government organisation operating in Uganda. UFF is “breaking the cycle” through education. We believe that education is the primary means of creating lasting change, increasing literacy and improving employment. UFF is building a combined primary school and vocational training centre for over 300 students in the Kasanje region of Uganda. </p>
<p>United Future Foundation is focussed on facilitating access to education and skills training for disadvantaged youth in poverty stricken and remote areas of Uganda. We strongly believe that education is the first and foremost method to break the cycle of illiteracy, ill health and lack of opportunities. </p>
</div>
</div>
<div id="home_home"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('home','','images/news_down.jpg',1)"><img src="images/news_up.jpg" name="home" width="250" height="188" border="0" id="home" /></a>
<a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('about','','images/about_down.jpg',1)"><img src="images/about_up.jpg" name="about" width="250" height="188" border="0" id="about" /></a>
<a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('events','','images/what_up.jpg',1)"><img src="images/what_down.jpg" name="events" width="250" height="188" border="0" id="events" /></a>
</div>
</div>
</body>
</html>

Problems with Relation for char field (Forms 9i)

hi, people
I have 2 DataBlocks. Every block has the same table of the database as a source.
I create the relation between this two blocks. I use the primary key as a Join Condition.
Primary key is the Char(10) field.
All works OK until the value of this field doesn`t include the sign "_".
If the PK field doesn`t contain "_" the record will be displayed in DetailBlock else will not.
Help...
Thank you

Hi,
This problem is due to failuer of navigation of mouse cursore. For more specific solution can you give the error message and error code, So that we can have exact picture. Waiting for error code......

Problem in related to MIRO-CM

Similar Messages

Maybe you are looking for