Problem in Release Stretagy
Dear All,
I have configured release stretagy based on value range
Value Stretagy Group Codes
up to 20000 S1 G1 C1 & C2
up to 50000
Dear All,
I have configured release stretagy based on value range
Value Stretagy Group Codes
up to 20000 S1 G1 C1 & C2
up to 50000 s2 G1 C1 C2 & C3
I have mentioned value of charectaristic >=20000
>=50000
But problem is for any type of PO release strategy S1 is applicable instead of S2 depending on it's po value.
I hav used purchasing group & net PO price.
Please guide me i m very much confused.
Gitesh
Similar Messages
-
Steps for deleting release stretagy for Purchase Order
Hi,
Could you please help in deleting / cancelling the exisiting PO release stretagy? I need to create new release stretagy which is totally different from the existing one.
What are the steps in cancelling existing release strategy.
Can the same steps be used for cancelling release stretagy for Purchase Requistion?
Thanks.
AnandHi,
you goto
spro> mm>purchasing> purchase order> release procedure
there you go to to release strategy
then follow following steps.
1.delete release strategy
2.delete release codes
3.delete release groups
then to create new release strategy and follow following steps
1 create characteristics ( use table cekko)
2 create class( class type 032)
3 . create release group and assign class to it.
4 create release codes
5 then create release strategy using release group and release code.
hope this will solve your problem
Regards,
Vijay -
Problem for releasing blocked sales order on Creditlimit
Hi Gurus,
I a hve a problem for releasing blocked sales orders
what i have done: 1)i have blocked sales order based on exceeded creditlimit
(i have change SDType in 'OVAK' is 'C')
2)now i have to release for furthur processing so i have done following steps
3)Goto VKM3/VKM1 T.Code and then release what order that is blocked.
4) order will appear in the list.
5)Select that one.
6)Click on the green flag that appears on the left hand side.
7)Click on save.
8)click on back it will ask for "Leave list".
9)Click on yes.
10)It said that Sales orer has been released
Still what my problem is:
Problem: 1)So i'm trying to create deliver for Sales order but it shows an error
2)"Sales order is blocked for delivery: Credit limits" Even it was released
Plz kindly help me what i do....
Thanks In Advance
sivakumarsorry i was unfotunately put this thread here over in SD
-
Problem while releasing Request
Hello All,
In one of our client's DEV Server, we are facing problem while releasing requests.
When I release a request it is not appearing in the PRD import Queue.
When I checked the TMS Alert Viewer, it is showing as" TP REPORTED ERROR"
And more over when I checked in the OS level,only the cofile is created not the data file.
Please suggest ..
Thank You,
Regards,
HasanHello,
Here is some contents from Slog.dev
Name: SLOG1126.DEV
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110627095120). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (20), I'm waiting 1 sec (20110627095151). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (30), I'm waiting 4 sec (20110627095215). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110628123131). My name: pid 7500 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110630093900). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (20), I'm waiting 1 sec (20110630093925). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (30), I'm waiting 4 sec (20110630093949). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (40), I'm waiting 2 sec (20110630094020). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (50), I'm waiting 2 sec (20110630094055). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (60), I'm waiting 1 sec (20110630094132). My name: pid 8124 on stisdev (APServiceDEV) -
Hi
I am facing a problem while releasing transport oif copies. I have created a TC which contains a Workbench request. When I am releasing the request its not getting released. it gives message at bottom of the screen " tp successfully connected" and does not move further neither it gives any error.
If its a local request then its getting released immediately. I created a virtual system in TMS and connected to the system from where I am releasing the request. This virtual system is mentioned in target of the request. Transport tool and transport route check also not giving any error.
Any idea what could be the problem?
Thanks in advancePlease post the solution to the problem... this way someone else will benefit from your post.
Regards
Juan -
Problem with release statergy po
Dear Friends ,
I had maintained release statergy for PO . I had taken chraterstic "Order type" "Purchase group" "Order Value" . All configaration is fine and simulation also showing ok . But it is not triging . Is it any problem in release indicator seting . I had maitained in two level for 3types of currency . I had maintained charaterstic for for each currency type . I am unable to find the error.......what could be the cause .........
RHi
If you have maintained 3 chracteristics for 3 Currencies then The sytem will check if all the three currencies exits or not & then only the relase strategy will trigger.
better option is to maintain the Currency Key charcteristic with 3 Charcteristic values INR, USD, EUR.
Please check
Thanks & Regards
Kishore -
Problem in release strategy in a plant PO. Strategy does not appear
Hi:
I have a problem with release strategy in plant PO. When we create a PO in this plant, we have no tab for release strategy, if I change the plant in PO for a different one I get this tab with all data.
I have checked OMGS, CL20N and everything seems to be in order. I think this is a problem in plant definition, but I really donu2019t know where I can look for. This plant is a copy of an existing one, and in this plant there is no problem.
Please, any idea?
Thank you very much in advance.you can test if one or more strategies can be found. (you should one find one, otherwise SAP is not able to determine which one should be used)
go to CL30N.
Enter your class and class type 032, hit enter
Enter values for the characteristics. and click button for a search in initial class.
I dont think it has something todo with plant customizing. Classification just takes the values that are in your PO and searches for a strategy which has to be in table T16FS. -
Hi gurus,
i am having a problem while releasing the project and i am getting an error defined below. even after checking the configuration in materials profile and other things im still getting the same error.
Order type SH01 plant 1300: No checking rule maintained for operation
hope u wil do the needful help.Hi,
In transaction OPJK maintain the required configuration with respect to plant, order type & business function. This should solve your issue.
Regards,
Gokul -
Problem in Releasing 46B IdocSegment in 640 SAPECC5.0
Hi All,
I have one Idoc segment which was created by some developer in 2005. This segment showing release 46B in WE31.
Now SAP system is upgraded to ECC 5.0 and all the new created Idoc segments showing release 640 in WE31.
But problem is that i have to edit this old segment, so i am trying to release this segment, but WE31 is showing following error "EA259-Error while resetting release of segment". Also i can not delete/change this segment without release.
Please guide me how to release this older version Idoc Segment in ECC5.0 SAP.
RegardsHi,
Sorry ... I never face this issue but please try to debug the program when you cancel the release. The error is occured in program LEDIJF05 when perform CHANGE_CLOSE_SEGDEF.
Other alternative is to create the new version with reference to old version and release it.
Regards,
Ferry Lianto -
Problem in Releasing the Request
Hello,
I am trying to release the request which is targetting to one of the available system (say QAS)
When clicking the release button, I am getting the error message as below :
=========
Test call of transport control program (tp) ended with return code 0232
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK EBDK900238 pf=
ECCECB\sapmnt\trans\bin\TP_DOMAIN_EBD.PFL -Dtransdir=
EC"
which checks the export requirements, returned the following information:
Return code from tp: 0232
Error text from tp: ERROR: Connect to EBD failed (20081202235756, prob
System Response
Further processing is terminated.
==============
Any idea how do we overcome this?
Thankshi,
I have the same issue long back.
It is purely Basis issue just tell them the problem and they will solve it. -
PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10
Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKYhi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula. -
Problem in Releasing/Transporting Request from Cust & Development Client
Hi,
I had made up a report and i trying to transport it into the PRD Server but the problem when i use Tcode SE09 and there i clicked on the su-request ID it got released and when i clicked on main request ID it has givne run time error. But again i execute the transaction code SE09 and tried to realease the main request ID ,it is not allowing me to do it as a Message displays :-
Task DEVK904185 has the status "Release started"
I dont know why it is happening ? I had relaesed a lot of request before but never faced a problem like that.
Please guide me how to solve this tranport problem..
Edited by: nav009 on Dec 23, 2009 7:46 AMHi Juan,
The error which had came during the releasing of main request id was:-
Short text
Operating system cannot close file "\\piic071\sapmnt\trans\tmp\DEVE904185.DEV"
What happened?
Resource bottleneck
The current program "SAPLSLOG" had to be terminated because
a capacity limit has been reached.
I am currently at display mode of request in which there is a tab named object in which there are 2 lines present. These are:-
1. Comment Entry : Released ; Program ID : CORR(Comment Automatic) ; Object Id: RELE(Comment Entry: Released);
Object Name: DEVK904186 20091223 115834 ABAPER
2. Program.Program ID : R3TR(OBJECT) ; Object Type : PROG ; Object Name: ZBDC_MM01_R1ZBDC_MM01_R1
The package which we use is ZABAP which is used to transport all the creations and modifications it to the PRD Server...
Is there any way of solving this issue...... -
Problem in releasing Purchase order(ZCAP and ZREP)
Hi,
I had made a purchase order and now i want to release in the tcode ME29N but the when i execute this tcode and fill the PO it gives the message that it cannot be released.
can any body provide me guideliens for it to solve this problem.First Go to ME23N Purchase ORder Display and In Header tab Check Whether Release Strategy tab is there.
If its there Check whether all the Charecteristics values you defined are meeting the Release strategy.
Then go to ME29N and Put tick mark on Set Release Option and Try again.
Regards,
Ashok -
Hi,
I am using .Net 2005 and OCCI. It is doing all the things in right way when I do the things run in debug version. But it is giving MSVRC80d.dll not found when I run the program in release mode.
Please help me sorting out the problemI pasted all the relevant dlls in the release folder but now it is giving stack trace
-
Problem with released transports
Hi All,
We have made changes to the existing query ( added two free charcteristics ) and collected it in a transport request.The query elements ( the free characteristics which have been added ) have both modified and active version in RSZELTDIR table.After releasing the request successfully into qualiy the changes are not getting reflected.The query elements are present only in the modified version but not active version.
We have one more similar issue.When we create a new query, include new query elements in the query and transport it to quality no entry is created for the query elements in the table RSZDELTDIR.
Could someone help me out in figuring out the problem?
Regards,
Shravanihi,
Generally we face this error when the objects are not collected properly
check whether the query elements are collected into transport request or they are in temporary request/Package($TMP)
in your case i think they might have struck in temp request if it is so collect the query again in transport connection tab of RSA1 and check for the transport requests/package of the query elements
If they are in Temp right click on it and select change package and collect it again
Regards,
MADhu
Edited by: MadhuMarupudi on Aug 18, 2009 8:37 AM
Maybe you are looking for
-
Sort order in iCloud shared photo stream
I have an album of photos in iPhoto v9.5.1 which I want to share using the iCloud shared photo stream. I've carefully sorted the photos in the album. But when I create and send the invite for the shared photo stream, it automatically re-orders the
-
I downloaded itunes this morning and when I try to open it, the user agreement pops up and when I hit "agree" I get an error message saying it's on a locked disk or I dont have write privaliges. I have tried 1. running as an administartor 2 changing
-
Hi, I want to proof in a switch step, if the message part 'price' is lower than the 'price'-part of an other message. Dependent from the expression, the corresponding fork is triggered in my BPEL process. I know there is an expression editor, but I c
-
Java files open in SQL Developer instead of JDeveloper
JDEV 10.1.3 Windows XP When I double click a java file, it opens in SQL Developer instead of JDeveloper. When I right click a java file, and select 'Open With'->jdeveloper, the java file always opens in SQL Developer instead of JDeveloper. I've tried
-
Port fowarding not working and Max Payne 3
I have had a proble with this game badly lagging and some things not being applied to my account while playing etc etc etc Now the ports that I've already opened ( or seemingly not ) are :- UDP 6672 UDP 27900 UDP 27901 443 I have put the Hub 3 ( 3A )