Problem in releasing request

Hi
I am facing a problem while releasing transport oif copies. I have created a TC which contains a Workbench request. When I am releasing the request its not getting released. it gives message at bottom of the screen " tp successfully connected" and does not move further neither it gives any error.
If its a local request then its getting released immediately. I created a virtual system in TMS and connected to the system from where I am releasing the request. This virtual system is mentioned in target of the request. Transport tool and transport route check also not giving any error.
Any idea what could be the problem?
Thanks in advance

Please post the solution to the problem... this way someone else will benefit from your post.
Regards
Juan

Similar Messages

Problem while releasing Request

Hello All,
In one of our client's DEV Server, we are facing problem while releasing requests.
When I release a request it is not appearing in the PRD import Queue.
When I checked the TMS Alert Viewer, it is showing as" TP REPORTED ERROR"
And more over when I checked in the OS level,only the cofile is created not the data file.
Please suggest ..
Thank You,
Regards,
Hasan

Hello,
Here is some contents from Slog.dev
Name: SLOG1126.DEV
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110627095120). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (20), I'm waiting 1 sec (20110627095151). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (30), I'm waiting 4 sec (20110627095215). My name: pid 8084 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110628123131). My name: pid 7500 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (10), I'm waiting 4 sec (20110630093900). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (20), I'm waiting 1 sec (20110630093925). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (30), I'm waiting 4 sec (20110630093949). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (40), I'm waiting 2 sec (20110630094020). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (50), I'm waiting 2 sec (20110630094055). My name: pid 8124 on stisdev (APServiceDEV)
WARNING:
stisdev\sapmnt\trans\tmp\SAPABAP.LOS is already in use (60), I'm waiting 1 sec (20110630094132). My name: pid 8124 on stisdev (APServiceDEV)

Error while Releasing Requests in Development Server

Dear all,
While I am releasing request in development server, i m getting following error message, so i could not able to release request.
Message : Test Call of transport control program (tp) ended with return code 0208.
pls , give any good suggestion.
Thanks & Regards,
Sandip Sonar.

Hi,
This is purely basis issue, you have nothing to do with it.
Forward the same screen shot to your basis people,they will take care.
This happens when some problem in transport layer between servers.

SCCM 2012 R2 - Migration TS Failed in Release Request Step with Error Code 0x80004005

Hi
I have Upgraded my lab from SCCM 2012 SP1 to SCCM 2012 R2. Now, While I am running TS for Refresh/Replace Migration, its successfully captures all the Data & settings and can also restores all Data & settings, but at release request Step TS got failed.
In SMSTS log file error was "Release Request Failed with error code 0x80004005".
Is there any KB released by Microsoft to fix this issue?? Due to this issue I am unable to run any other TS.

I've seen a few weird scenarios with task sequences after an upgrade from SP1 to R2.
In most cases I've been able to fix these "problems" by simply creating a new task sequence, and copy all the custom steps to the new task sequence.
Also make sure to update boot images, mdt packages, usmt etc. to new versions.
So thats what I'd try first....
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Transport Organizer: Released Request back to Modifiable status

Hello Colleagues!
It's possible to change an already Released Request back to Modifiable (Transport Organizer: Requests TC SE10)?
If not, what is the workaround?
Many thanks in advance!
Regards,
Jochen

I was cleaning up abandoned work from other developers, had deleted all the objects in a task, and meant to delete the task itself, but out of habit hit the Release icon. I wanted this task gone, so I wrote this program. It worked to reset the task status and then I was able to delete the task.
*CAUTION: Use this program only for a similar situation. Any misuse is your responsibility, not mine.
*& Report ZE070_MOD_TR
REPORT ze070_mod_tr.
PARAMETERS: p_trstat LIKE e070-trstatus,
            p_trkorr LIKE e070-trkorr,
            p_update AS CHECKBOX.
TABLES: e070, e07t.
SELECT SINGLE * FROM e070
WHERE trkorr EQ p_trkorr
    AND as4user EQ sy-uname.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM e07t
    WHERE trkorr = e070-trkorr.
WRITE:/ e070-trkorr, e070-trstatus, e070-as4user, e07t-as4text.
IF p_update EQ 'X'.
    WRITE:/ 'Changing status from', e070-trstatus, 'to', p_trstat.
    e070-trstatus = p_trstat.
    MODIFY e070.
    COMMIT WORK.
    IF sy-subrc EQ 0.
      WRITE:/ 'Record updated'.
    ELSE.
      WRITE:/ 'Problem with record update'.
    ENDIF.
ELSE.
    WRITE:/ 'Display only - status not changed'.
ENDIF.
ELSE.
WRITE:/ 'No entry found for task/request', p_trkorr.
ENDIF.
End of Program ***

Problem for releasing blocked sales order on Creditlimit

Hi Gurus,
        I a   hve a problem for releasing blocked sales orders
         what i have done: 1)i have blocked sales order based on exceeded creditlimit
         (i have change SDType in 'OVAK' is 'C')
                  2)now i have to release for furthur processing so i have done following steps
                  3)Goto VKM3/VKM1 T.Code and then release what order that is blocked.
                  4) order will appear in the list.
                  5)Select that one.
                  6)Click on the green flag that appears on the left hand side.
                  7)Click on save.
                  8)click on back it will ask for "Leave list".
                  9)Click on yes.
                  10)It said that Sales orer has been released
Still what my problem is:
Problem: 1)So i'm trying to create deliver for Sales order but it shows an error
         2)"Sales order is blocked for delivery: Credit limits" Even it was released
Plz kindly help me what i do....
Thanks In Advance
sivakumar

sorry   i was unfotunately put this thread here over in SD

System.InvalidOperationException: Call to Excel Services returned an error. --- Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: We're sorry. We ran into a problem completing your request

0
HI All,
I am having problem with the power pivot dashboard.
power pivot dashboard processing job fails with the follwoing error message.
SP 2013 with 2008 r2
SQL 2014 power pivot on new analysis server.
Data refersh of cube and database works finw form the power pivot gallery.
The Execute method of job definition Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob (ID 726034a7-b9a9-45a6-b720-640b3f785e49) threw an exception. More information
is included below. Call to Excel Services returned an error.
ULS error:
EXCEPTION: System.InvalidOperationException: Call to Excel Services returned an error. ---> Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: We're sorry.
We ran into a problem completing your request. ---> Microsoft.Office.Excel.Server.WebServices.ExcelServerApiException: We're sorry. We ran into a problem completing your request.
at Microsoft.Office.Excel.Server.WebServices.ApiShared.ExecuteServerSessionMethod(Boolean hasSessionId, String sessionId, CoreServerSessionMethod coreWebMethod, String name,
Boolean skipFeatureCheck)
at Microsoft.Office.Excel.Server.WebServices.ExcelService.OpenWorkbookInternal(String workbookPath, Boolean editingMode, String uiCultureName, String dataCultureName, Boolean
newWorkbook, Boolean suppressRefreshOnOpen, Boolean openExclusive, Status[]& status)
at Microsoft.Office.Excel.Server.WebServices.ExcelService.OpenWorkbookEx(String workbookPath, String uiCultureName, String dataCultureName, Boolean exclusive, Status[]&
status)
at Microsoft.AnalysisServices.SPClient.ExcelApi.<>c__DisplayClassa.<OpenWorkbookEx>b__9(ExcelService svc, Status[]& status)
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall)     -
-- End of inner exception stack trace ---     -
-- End of inner exception stack trace ---
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall)
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall, String methodName, Object[] parameters)
at Microsoft.AnalysisServices.SPClient.ExcelApi.OpenWorkbookEx(String fileUrl, String uiCultureName, String dataCultureName, Boolean exclusive)
at Microsoft.AnalysisServices.SPClient.ASSPClientProxy.OpenWorkbookModelForRefresh(String workbookPath, SessionLifetimePolicy lifetimePolicy)
at Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob.RefreshUsageCube(GeminiServiceApplication application)
at Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob.Execute(Guid targetInstanceId)
Thanks
Ravi

HI Ravi,
Did you find the solution?
Thanks in advance
Regards,
Faraz Javaid

Urgent !!!! Problem in Leave request

Hi Experts,
I am facing one problem in leave request. When manager tries to approve leave request although is able to do so but he is getting one message "You do not have sufficient Authorization" .
I dont know why this message is coming.
Please provide the solution.
thanks
Sameer

Am not sure if this is gonna work ..check whether agent asignment of the workflow u are using is set to general task or not ?
Regards,
Aditi

Problem with release statergy po

Dear Friends ,
I had maintained release statergy for PO . I had taken chraterstic "Order type" "Purchase group" "Order Value" . All configaration is fine and simulation also showing ok . But it is not triging . Is it any problem in release indicator seting . I had maitained in two level for 3types of currency . I had maintained charaterstic for for each currency type . I am unable to find the error.......what could be the cause .........
R

Hi
If you have maintained 3 chracteristics for 3 Currencies then The sytem will check if all the three currencies exits or not & then only the relase strategy will trigger.
better option is to maintain the Currency Key charcteristic with 3 Charcteristic values INR, USD, EUR.
Please check
Thanks & Regards
Kishore

Released request are not appearing in import queue

Dear experts,
Released requests are not appearing in the import queue. Can any one help me to get these requests in import queue.
rgds.....
Art

Hello Ratna,
Can u please check that once u release the request from DEV it should be appear in QA COFILE and DATAFILE or not...u have to physically check it .....
and if yes then u can also import that file through ADDTOBUFFER and IMPORT command at command prompt level.

How to find the creation date for a released requests..

Hi friends ,
In se09 tcode , we a date which represents the last changed date .. Now , for a particular Released request i want to find out the Creation date for it . How can i find it . I checked the tables like E070create there also we have requests that not released yet , i have also checked se03 and other tcode and a fn mo dules like TR_READ_GLOBAL_INFO_OF_REQUEST .
So how to find the creation date for a released requests. Iam waiting for ur inputs..
Thanks in advance..

hi,
Did u found the way to get the request creation date?
I also need the same information.
This needed for audit purpose........so it is must.
Please help me in this.
Best regards,
vinod

How to check released request transported to Production sys or not

hi,
Iam not a Basis guy, so waiting for your replies.
I have around 200 released requests in my dev system and i want to check wether these requests have reached my production system or not as a mass. I can able to check on one by one but how to do it in mass. ie..i load these requests and find withwether it has reached my target system.
Thanks,
Suresh

One simple ms excel method described below.
1.Take list of transport entries from E070 table ( SE16)in production method ( you can select a particular time period).
2. take a list of all the released request from Dev system.
In excel , use Red color for production entries and some other color for Dev entries. Then paste them in a single column and sort them according to name. If a request has been imported in Production , you will find two entries for the request number.

Problem in release strategy in a plant PO. Strategy does not appear

Hi:
I have a problem with release strategy in plant PO. When we create a PO in this plant, we have no tab for release strategy, if I change the plant in PO for a different one I get this tab with all data.
I have checked OMGS, CL20N and everything seems to be in order. I think this is a problem in plant definition, but I really donu2019t know where I can look for. This plant is a copy of an existing one, and in this plant there is no problem.
Please, any idea?
Thank you very much in advance.

you can test if one or more strategies can be found. (you should one find one, otherwise SAP is not able to determine which one should be used)
go to CL30N.
Enter your class and class type 032, hit enter
Enter values for the characteristics. and click button for a search in initial class.
I dont think it has something todo with plant customizing. Classification just takes the values that are in your PO and searches for a strategy which has to be in table T16FS.

Released request are not in import queue

Dear experts,
Released requests are not appearing in the import queue. They are not in the cofiles folder also. Can any one help me to get these requests in import queue.
rgds.....
Art

Hi,
Please go to SE01, select your request(s) and on the next screen click on the request. In the opened screen navigate to the properties tab and see what target system you have defined for the transport. If there is no definition, transport is considered as local and will not be released to cofile/data folders (but stays in E070). You have to define the correct target system as it's defined in TMS to make you request tranportable
Regards,
Mike

Unable to view Behance - Oops! There was a problem with your request

Hi,
Today, I am unable to view Behance and I'm unable to log in as well.
Received the error message - Oops! There was a problem with your request.
Please refresh the page to try again.
Contact support if the problem persists.
Does anyone has the same problem, Anyone knows how to resolve this?

Hi - we can definitely help! To have a private convo where we can give you your accont info, please write us a ticket here and someone will get back to you ASAP:
Behance Support & Forum : Submit a request for assistance

Problem in releasing request

Similar Messages

Maybe you are looking for