Problem in releasing the workbench request

I have created a local change request in my workbench.
but i am not able to release it.
it is giving error as objects not activated.. but the objects are already activated..
please provide a solution.

Hi,
In SE09, select your request/task and there is a menu option to check inactive objects.
Pls make sure that everything is active here.
Thanks & Regards,
Renjith

Similar Messages

Unable to release the change request from se01

HI All,
Recently i had applied Rsecnotes as per sap recommendation in EWA Report and I implemented successfully in DEV System. But, When i try to release the change requests from SE01 in (DEV System)
it is giving the error message "Object Func<objectname> is inactive". I have unlocked all the request and checked but still problem exsist.
Please help me to release the request and implement in the landscape.
Thanks,
Rajesh N

Hi,
Activate the object using se03 and then relaese the request
thanks

How intelligent is the Workbench Request?

Hi,
I created an ABAP program and the Workbench Request was created too. I want to know before Releasing the Request if I go and modify the ABAP program may be after Few Days will that modification get added to the existing Request which was created at the time ABAP program creation?
Thanks,
Kishan

YA.. Until u release the request once created for a report(or any object) all the changes will reside in that request only. If u delete the existing request explicitly then a new request should be created again.
If ur doubt is cleared pl close the thread.
Regards,
Pradhiba

Can give me the details how to release the transport request to the qa

can give me the details how to release the transport request to the quality server pr production server
thanks

Hi,
Use transaction SE09. Here select "modifiable" .Then click -Display.
Now you get a list of all requests which can be released.
Locate your request number and drill down. Release the sub-request first and then the main request by selecting and using the "transport" icon.
Muraleedharan.R
091 9880028904

Release the transport request

Hi,
I created the transport request.I want to release the transport request from developement to testing ,
Please tell me how to do that.
regards,
chinna.

Hi,
Check the below steps.
1. Go To SE09 or SE10.
2. Click 'Display' button.
3. TR will be list out in Tree view.
4. Place the cursor in the TR which is going release.
5. in menu, Request/Task->Complete check->object and
Request/Task->Complete check->Check Request Consistancy
Request/Task->Complete check->Inactive Objects.
6. in above if you get any error, you should rectify the error and repeat all the steps again. otherwise do the step7.
7. Click the 'Release Direclty'[F9] button in the toolbar.
Regards,
Boobalan S

FM to release the spool request for printing

I have requirement one of my program generate the spool request.
now i need to schedule the print job in background.
can any one help in specifing the Funtion modulde that can be used to releasing the spool request for printing

Hi ,
Please can one specify what are the parameters to be populated to make it run in the back ground
right know i'm populating these fields.
In SP01 it showing status as "Frontend Unavaliable".
if i schedule the program in back ground.
CALL FUNCTION 'RSPO_OUTPUT_SPOOL_REQUEST'
EXPORTING
   COPIES                         = 1
   DEVICE                         = 'LOCL'
DIVISION                       = '*'
   ENDPAGE                        = 0
   PRIO                           = 1
RECEIVER                       = '*'
REQEST_TITLE                   = '*'
    spool_request_id               = '9817'
STARTPAGE                      = 0
TELELAN                        = '*'
TELENUM                        = '*'
POSNAME                        =
ACTTIME                        =
TABLES
ATTRIBUTES                     =
EXCEPTIONS
   ARCHIVE_DEST_INVALID           = 1
   ARCHIVE_DEST_NOT_FOUND         = 2
   ARCHIVE_DEST_NO_RIGHT          = 3
   CANNOT_ARCHIVE                 = 4
   CHANGE_ARCHDEST_NO_RIGHT       = 5
   CHANGE_COPIES_NO_RIGHT         = 6
   CHANGE_DEST_NO_RIGHT           = 7
   CHANGE_DEVTYPE_NO_RIGHT        = 8
   CHANGE_PRIO_NO_RIGHT           = 9
   CHANGE_TELENUM_NO_RIGHT        = 10
   CHANGE_TITLE_NO_RIGHT          = 11
   DEST_INVALID                   = 12
   DEST_NOT_FOUND                 = 13
   DEST_NO_RIGHT                  = 14
   INTERNAL_PROBLEM               = 15
   INVALID_FAX_ATTRIBUTE          = 16
   INVALID_PARAMETERS             = 17
   NON_OWNER_NO_RIGHT             = 18
   NO_LAYOUT                      = 19
   NO_SPOOL_REQUEST               = 20
   OUT_AGAIN_NO_RIGHT             = 21
   SPOOLER_PROBLEM                = 22
   OTHERS                         = 23

Problem in Releasing the Request

Hello,
I am trying to release the request which is targetting to one of the available system (say QAS)
When clicking the release button, I am getting the error message as below :
=========
Test call of transport control program (tp) ended with return code 0232
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK EBDK900238 pf=
ECCECB\sapmnt\trans\bin\TP_DOMAIN_EBD.PFL -Dtransdir=
EC"
which checks the export requirements, returned the following information:
Return code from tp: 0232
Error text from tp: ERROR: Connect to EBD failed (20081202235756, prob
System Response
Further processing is terminated.
==============
Any idea how do we overcome this?
Thanks

hi,
I have the same issue long back.
It is purely Basis issue just tell them the problem and they will solve it.

Problem while releasing the request

I created a customized Z report from the existing standard SAP report and also created a new tcode into the development server, and released the request via se09 into quality server. Now when I try to execute this tcode in the quality server, its giving me a error message 'status STANDARD of the user interface ZRM06ENDR_ALV missing'. Due to which its not displaying various push buttons like 'print preview' 'messages' etc. However its working fine in the dev server

You should creat GUI status. You can copy it from another report by clicking right on the gui status from which you copy. Then specify the target report. Then in your Z report activate the gui status. Also write the code below:
form alv_menu using rt_extab type slis_t_extab.
set pf-status 'STANDARD_FULLSCREEN'. " Write here your gui status' name .
endform.
In call function reuse_alv_grid_display set i_callback_pf_status_set parameter as 'ALV_MENU'.

How can I re-release the Customizing request

Hi,
Yesterday, I released a customizing request to QAS. At the QAS, I used the T-code STMS to check the import request, I could not find out it.
But, today, I released another customizing request to QAS. I can find out it. I don't known what had happened.
Could I re-release the CR? How to deal with this question?
Waiting for answer, THX
jk

Dear all,
Thanks for your time. The problem is still have.
I have released the Task and Sub-task, and I checked the import queue in which there isn't the TR.
I released a new customizing request, it can be find out the import queue.
I think the transport routes maybe have problem at yesterday, so I want to re-transport the customizing request.
Which method can I choose to do that?
jk

Released the Transport Request which is in Local Change Request

Hi,
Actually without knowing I have released transport requests which are under Local Change Request.Due to this they are not available for importing in Quality system.My Package is also there in one of those Requests.Now please guide me how to recover these requests.
Regards
Karthik

Hello Karthik
The easiest way should be to copy the object list of your local request to a new (transportable) workbench request.
However, the system might tell you that your objects can only be put into a local request.
In this case you need to find out why your objects are not (yet) transportable.
Usually there are two reasons for local request:
1.) The request does not have a target system -> check the request header and enter the correct target system (if possible)
2.) Your package has an inappropriate transport layer assigned -> change the transport layer
Regards
Uwe

How to release the Change request (Task in Repair Mode)

Hello everybody,
I have change request in that one Task in Repair mode.
when i trying to release, it give the error message like
Repair HRDK900911 may only contain repaired objects
Diagnosis
In repairs, you can only lock and edit those objects whose original exists in another SAP System.
The object R3TR PROG /VWK/GPS_VCD_R was found in the object list of your repair HRDK900911. This object is not a copy but the original.
So please suggest me
How to release the Task (Repair) so I can release the request.
Thanks

Yes you wont be able to release the request till you remove the flag from SE03.
Goto SE03 > Display Repaired Objects
Select Your object and remove the repair flag from top <Repair Flag>
R3TR PROG <Your Object>
Also as you are getting an error
No valid change license available for namespace
In SE03-->Display/change Namespace
when I check the specified Namespace then their is no Repair License.
So please suggest me Repair License is required?
check what namespace it is refrerring to ... A namespace name should be there....
1. Go to SE06 and click on the System Change Option.
2. Verify that Namespace Systems Development /Namespace/ is "Modifiable".
or
1. Run transaction SM30
2. Enter V_TRNSPACE
2. Click Maintain
3. Double Click on Namespace /NAMESPACE/
4. Change Namespace role from P to C, then hit Save
All the best !
Edited by: prateek_y on Aug 30, 2010 3:21 PM

How to release the transport request

Some one please help me here on better understanding on how transport
are maintained and what steps should be taken before releasing it.
I know we can see the list in se so that will not be the answer of my
question need proper explanation on that please I will be highly obliged.
thank you
Bushan

Hi
Initially when a config request is raised...the settings are saved under a Request number. Every request is associated with a task under it.
Release the task first (select the task and press F9)and then release the request(select the request and press F9). The objects will be no longer locked then and are free to be moved.
Be careful while releasing the task. See the tables effected(if you expand task u can see). If you feel some unconnected table is included better a careful consideration be given while moving the request.
When you release the task...the system may prompt you to enter text..that is nothing but the identification/explanation of your activity. You can record the same.
Hope im clear
Regards
A
Message was edited by:
A.Aravind

What is the workbench request and customizing request.

can anybody explain what is workbench request and what is customizing request.

<b>Workbench Requests</b>
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
<b>Customizing requests</b>
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.

Problem while releasing the production order.

Hai gurus,
When i release the production order , SAP doesn't block when i have a deficit of stock for some materails.I checked all the customizing and found every thing is fine.
As the materials that has defict stock has back flush indicator, is that the reason why the system is assuming the stock when releasing.

Hi,
You need to consider the following customization settings
(1) OPJK - For the Plant/Order type/Availability check-2 for the material availability - Release material - set the indicator '3' No release if parts are missing
(2) OPJJ - For availability check & checking rule - check what all elements are considered as part of ATP check.
With these settings - in the production order if the order header has status MSPT - Missing parts (i.e. components are missing) only then system will stop the release of the order.
I hope this addresses your query
Warm regards,
Umesh

Problem in releasing the billing document

When I am trying to release the billing document to accounting, I am getting the following error.
"Account XYZ requires an assignment to CO object".
What could be the cause of it?

Hi Christino,
Carefully think about it first as to which account groups belong to which chart of accounts (or which profit center groups to which controlling area).
Then call report ZECPCA11 for the respective top hierarchy node of a hierarchy of account groups (or profit center groups).
Enter the name of the hierarchy node under "Group", the name "RACCT" for account groups (or "RPRCTR" for profit center groups) under "Field" and the required chart of accounts (or controlling area) under "Searchf".
The "0H_Kennz" indocator should generally be marked (all groups that were created with the maintenance transactions in EC-PCA are technically stored as 0H sets in the database, that is, with prefixed "0H").
Report ZECPCA11 fills the T800S-SEARCHFLD field with the required chart of accounts (or controlling area) for all groups of the entered hierarchy.
After you have corrected all hierarchies this way, you should be able to maintain the account groups or profit center groups again.
You can find report ZECPCA11 on SAPSERV in directory /ftp/general/R3Server/ABAP/note.0042821 under the name "ZECPCA11.TXT". Alternatively, create the report from the 'Corrections' section using Transaction SE38.
For further more details, please refer the SAPnote 42821
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=42821
hope it will be useful. Appreciate with points if it useful.
Thanks and Regards
Vetrivelan

Problem in releasing the workbench request

Similar Messages

Maybe you are looking for